Operating Instructions for Hand-held Measuring Instrument P200 Art
Contents
1. Measuring range 40 C to 200 C Cable max 80 C Resolution 0 1 C through the measuring range Accuracy 1 C from 10 C to 100 C otherwise 2 C Sensor NTC resistor Permissible operating temperature range 0 C 40 C Operating voltage 2 size AAA cells 1 5V each Battery life approx 1 year Case dimensions approx 95 x 60 x 18 mm L x W x H Weight approx 130 g Attention The probe cable is not heat resistant2. Operating Instructions for Hand held Measuring Instrument P200 Art Nr 30 1015 Commissioning Remove the protective film from the film keyboard Open the battery compartment on the rear of the instrument and if present remove the battery circuit breaker strip The instrument switches itself on and is immediately ready for operation after inserting the batteries Button ON OFF The measuring instrument can be switched on and off with this button AUTO OFF function the instrument switches itself off automatically after approx 15 minutes if no button has been pressed during this time Button C F this button is provided for switching over the display between C and F The currently active temperature units are retained even after switch off Button MODE Press the MODE key once in normal mode and the hold function is activated indicated by HOLD Press the MODE key again and the maximum temperature is shown since the last reset indicated by MAX Press the MODE key again and the minimum temperature is shown since the last reset indicated by MIN Press the MODE key again to return to normal mode To clear the maximum and minimum memory press and hold the MODE key for 3 seconds in the corresponding mode while MAX or MIN is displayed indicated by Press the MODE key again to return to normal mode Battery replacement To open the battery case remove the both screws on the backside of the instrument Technical Data
Download Pdf Manuals
Related Search