Operating instructions - OPERTIS Produktkatalog
Contents
1. The APS Comfort System for Framed Doors fire protection is permanently coupled The door can be opened without authorisation of an identifier The fitting s switch mode is enabled see eLOCK system documentation section Fitting modes Disable switch mode O Reconfigure fitting time profile O Authorisation with switch IT to disable the switch mode 16 OPERTIS 09 2013 eLOCK GB Operating instructions APS Comfort System for Framed Doors fire protection ES7670F ES6670F ES7671F ES6671F ES7672F ES6672F ES7673F ES6673F 8 Product specifications Declaration of conformity Report OPERTIS GmbH hereby declares that the APS Comfort System for Framed Doors fire protection complies with the fundamental requirements and other relevant provisions of the directives 1999 5 EG and 2011 65 EU and are CE compliant A copy of the declaration of conformity can be obtained from OPERTIS support Installation in profile cylinder mortice locks according to DIN 18251 Locks Mortice locks Part 2 Mortice locks for tubular framed doors The lock has the building inspection test certificate from MPA Dortmund It is labelled accordingly According to Report No 120004118 1 by the MPA Nordrhein Westfalen the APS Comfort system for framed doors fire protection can be used on fire doors and shutters in conjunction with lever handles to DIN 18273 FS 09 2013 OPERTIS 17 GB eLOCK APS Comfort2. 23 OPERTIS ce OPERTIS GmbH Prof Bier Stra e 1 5 D 34454 Bad Arolsen Telefon 49 5691 87741 0 Telefax 49 5691 87741 310 info opertis de www opertis de M7000 64GBB V001 09 2013
3. o R oO M APS lock Fixing screw M5x50 Profile cylinder adapter for fire doors with antenna cable 11 Fire door plate oval 12 Rose for fire door 6 OPERTIS 09 2013 eLOCK GB Operating instructions APS Comfort System for Framed Doors fire protection ES7670F ES6670F ES7671F ES6671F ES7672F ES6672F ES7673F ES6673F 13 M5x20 screws 14 Rose cap 15 Profile cylinder housing 16 M4 countersunk screw door thickness dependent 17 Plastic profile cylinder cover with antenna Functional principle Self locking motor panic lock with integrated electronics according to DIN 18251 2 The OPERTIS locking system eLOCK ensures durchg ngige Objektausstattung Special fittings are available for different types of door The APS Comfort System for Framed Doors fire protection contains a self locking lock which automatically locks when the door is closed Conventional locking with knobs or keys is no longer needed nor is mechanical closing With the APS Comfort System for Framed Doors fire protection the inside handle is always coupled Through the integrated anti panic function the latch and release lever are retracted by pushing the inside handle the door can always be opened again from the inside The panic function cannot be switched off With the APS Comfort System for Framed Doors fire protection fire protection the outside handle is non functional when it is
4. Risk of property damage Using non approved types of battery can result in malfunction In this case the fitting would send no battery warning and would not enter the secure final state of Active Power Off Only use types of batteries which are approved by OPERTIS 09 2013 OPERTIS 9 GB eLOCK APS Comfort System for Framed Doors fire protection Operating instructions ES7670F ES6670F ES7671F ES6671F ES7672F ES6672F ES7673F ES6673F AN CAUTION Risk of being locked out The door cannot be opened without a functional fitting if the latch is in the lock Leave the door open during installation and battery replacement or ensure that the door can be opened at all times without using the fitting CAUTION Unauthorised access The inside handle of the APS Comfort System for Framed Doors fire protection is basically coupled as an anti panic lock This makes it possible to open the door at all times using the inside handle Be especially aware of this when using the fitting on publicly accessible doors and on doors with inside handles which can be easily reached from the outside CAUTION Unauthorised access The APS Comfort System for Framed Doors fire protection is delivered with factory settings Access is also possible with all non programmed OPERTIS identifiers Programme the authorisations immediately following installation to prevent unauthorised access see eLOCK system documentation software meanwhile ch
5. System for Framed Doors fire protection Operating instructions ES7670F ES6670F ES7671F ES6671F ES7672F ES6672F ES7673F ES6673F Dimensions All dimensions in mm ES7670F or ES6670F 18 OPERTIS 09 2013 eLOCK Operating instructions GB APS Comfort System for Framed Doors fire protection ES7670F ES6670F ES7671F ES6671F ES7672F ES6672F ES7673F ES6673F Technical data Surface Lock plate Stainless steel Profile cylinder cover Polyamide surface Cover cap Power supply Stainless steel Supply voltage 3 volt lithium battery CR 3V OPERTIS item no ES0893 Battery life Depending of conditions of use and O Operational readiness at approx 10 closures per day O Closures total O Standby time Specific details Operating temperature type of fitting O up to 3 years O up to 100 000 closures O upto 5 years 0 C to 45 C Storage temperature 20 C to 60 C Air humidity for operation and storage max 95 non condensing Protection class according EN 60529 IP 21 Lock strength according to DIN 18251 class 4 Increased burglar resistance and high user frequency VdS Association of German Property Insurance Companies inspection The lock has been tested and approved by the VdS Memory capacity in the fitting ES6xxx ES7xxx ES7xxx LernL sch Identifiers 60 000 80 000 100 Protection zones belonging
6. The following residual risks however cannot be ruled out O If the electromechanical components fail there is the risk of being locked out 8 OPERTIS 09 2013 eLOCK GB Operating instructions APS Comfort System for Framed Doors fire protection ES7670F ES6670F ES7671F ES6671F ES7672F ES6672F ES7673F ES6673F O If the battery suddenly completely discharges the APS Comfort System for Framed Doors fire protection will be non functional It will send no battery warning and will not enter the Active Power Off state It is then only possible to open the door from the outside with the external power supply ES6781 for ES5000 plus systems or ES7781 for eLOCK and eLOCK LernL sch systems 4 Safety instructions A The safety notes are to be read prior to use OPERTIS accepts no liability for any personal injury or property damage resulting from failure to follow this manual WARNING Risk of personal injury from the batteries Improper handling of the batteries can be harmful to health The following notes must be observed O Only use types of batteries which are delivered or approved by OPERTIS Do not open solder or weld batteries Do not throw batteries into fire Do not recharge batteries Immediately remove empty batteries from the fitting Keep batteries out of the reach of children Do not touch leaking batteries without appropriate protection Avoid contact with eyes and mouth O00000 CAUTION
7. decoupled It can be pushed but it is not connected to the the lock latch or release lever In this state the door cannot be opened using the outside handle Access is gained by brief coupling of the otherwise neutral outside handle after holding an authorised identifier in front of the antenna Upon actuation of the coupled outside handle the latch and release lever are retracted Conventional locking with knobs or keys is no longer needed nor is mechanical closing Administration and programming as well as the granting of access rights is done over the eLOCK Center administration software Optional programming with eLOCK LernL sch over three programming keys without additional software is possible To access the fittings passive identifiers without their own power supply are available in different designs such as key rings cards or custom designs Detailed information You can find further information on the product in section 8 Product specification 09 2013 OPERTIS 7 GB eLOCK APS Comfort System for Framed Doors fire protection Operating instructions ES7670F ES6670F ES7671F ES6671F ES7672F ES6672F ES7673F ES6673F 3 Intended use Area of use The APS Comfort System for Framed Doors fire protection matches the installation dimensions of a mortice lock in accordance with DIN 18251 2 and is designed for indoor use on narrow tubular framed doors Use of external doors is permissible only if the electronics
8. OPERTIS Operating instructions APS Comfort system for framed doors fire protection ES7670F ES6670F ES7671F ES6671F ES7672F ES6672F ES7673F ES6673F eLOCK GB Operating instructions APS Comfort System for Framed Doors fire protection ES7670F ES6670F ES7671F ES6671F ES7672F ES6672F ES7673F ES6673F Contents 1 Introduction ann 4 Ab urthese INSTUCUO Sins aaa en einen 4 Explanation of the symbols and signal words used s444s4s4s4enenenen nennen 4 O 4 OPER JIS SUPPEN ee teen een une 4 Up 1o date MO MAN er kn 5 2 Productdescription 0 ri 6 COMPONENT Dar da io 6 FURIA PIN AAA GRAN re aS 7 Detailed IMC nta 7 3 Intended AAA 8 ARO USA 8 Condition OF the DIOQUEL ea asa 8 Ambient conditions Eee kennen nenne teen IK uous rare Re REN 8 OW SRS ONY ae ae AO AR 8 Resid altis Keene si 8 4 Safety INStrUCHONS i iiiad iinei ensaian aii 9 5 USE and operation oi da 11 Programming fittings and identifiers usara 11 Ghangethe Dato Vaina ii 11 Acolstie Signals anerkennen 12 6 Servicing cleaning and maintenance uunnsssssnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 13 Intervals oran acatar 13 Cleaning and Maintenance as ee 13 SOME aid 14 7 Problems and SOQIUNONS vvicicicccisscicccccceicccccsseecciscctccedatsdaesiaeceeccdcessncudensiaccdeewdeausnavensvee 15 8 PFOGUCE specifications carac 17 Declaration of conformity ati nennen 17 A a cas rence a tions ean R
9. are installed ina protected internal area Use on outdoors such as in fencing is not permitted The lock meets the requirements for doors in escape and rescue routes according to DIN EN 179 and 1125 Used in approved and tested fittings Condition of the product The APS Comfort System for Framed Doors fire protection may only be used in a technically sound condition Unauthorised conversions or alterations of the product are not permitted Ambient conditions Use in particularly harsh environments e g corrosive gases high humidity extreme temperatures or very dusty conditions is not permitted Please contact OPERTIS Support if you have any questions Power supply Enable all battery powered fittings activate audible low battery warnings and controlled failure closures when the battery power in the fitting is coming to an end The battery must then be replaced immediately Repeated disregard for the low battery warning permanently decouples the APS Comfort System for Framed Doors fire protection from the handle Active Power Off The Active Power Off state is indicated by an acoustic warning See operating manual chapter 5 Use and operation This state is maintained until the battery is replaced or if relevant an external power source was connected to the outside of the door Residual risk This product supports the security of your property when used as intended and in compliance with the maintenance instructions
10. atan atau ET EEE ee 17 DIMENSIONS SAA 18 Te chnicaldat 2 3 a ESPRIT O ia 19 9 DISPosal arms 20 Product orere a a a cate ai ec 20 DAMOS NA ee 20 Producto PACKAGING nennen energie seinen dsena 20 A once agatneatedaegansestecsasertetnaswastal seed deaensusctanasertedadesteataleas 20 09 2013 OPERTIS 3 GB eLOCK APS Comfort System for Framed Doors fire protection Operating instructions ES7670F ES6670F ES7671F ES6671F ES7672F ES6672F ES7673F ES6673F 1 Introduction About these instructions This manual contains important information for operating the APS Comfort System for Framed Doors fire protection ES7670F ES6670F ES7671F ES6671F ES7672F ES6672F ES7673F and ES6673F O Read the manual thoroughly and carefully O Store the manual and pass on to each next user of the APS Comfort System for Framed Doors fire protection Explanation of the symbols and signal words used A WARNING da hazards that can lead to death or serious Indicates hazards that can lead to minor or A CAUTION moderate injury CAUTION Indicates hazards that can lead property damage Highlights hints and tips for optimum use of the noe manual and product Target group This manual is intended for specialist staff who are responsible for the service maintenance disposal and continued fault free operation of the APS Comfort System for Framed Doors fire protection and can prove that they have the suitable training or relevant exp
11. eck the time and reset if necessary 10 OPERTIS 09 2013 eLOCK GB Operating instructions APS Comfort System for Framed Doors fire protection ES7670F ES6670F ES7671F ES6671F ES7672F ES6672F ES7673F ES6673F 5 Use and operation Programming fittings and identifiers Fittings and identifiers are programmed over the eLOCK Center management software or the eLOCK LernL sch system You can find detailed information about these in the eLOCK system documentation software Change the battery Note Note the information on battery types in section Technical data Proceed as follows Step Activity Image 1 Screw in M3x9 screws on the mounting plate and remove the stainless steel cap Remove battery Insert the new batteries into the battery compartment observing the correct polarity See image 4 Place the stainless steel cap on top of the mounting plate and hook in place 5 Attach the stainless steel cap below the mounting plate with two M3x9 threaded pins 6 Perform a closure operation by holding an authorised identifier Check the date and time and reset if necessary see eLOCK system documentation software 09 2013 OPERTIS 11 GB eLOCK APS Comfort System for Framed Doors fire protection Operating instructions ES7670F ES6670F ES7671F ES6671F ES7672F ES6672F ES7673F ES6673F Acoustic signals The acoustic and visual signals of the Comfort system
12. erience for these activities OPERTIS Support Should you have any questions which are not covered in this manual please contact OPERTIS GmbH Prof Bier StraBe 1 5 D 34454 Bad Arolsen Tel 49 5691 87741 200 Fax 49 5691 87741 281 Email support opertis de 4 OPERTIS 09 2013 eLOCK GB Operating instructions APS Comfort System for Framed Doors fire protection ES7670F ES6670F ES7671F ES6671F ES7672F ES6672F ES7673F ES6673F Up to date information All information on the product images dimensions and lists correspond to the status at the time of product delivery We reserve the right to make changes as a result of technical progress and the resulting improvement product processes You can also find the current version of this manual and other information on our website www opertis de Status 09 2013 09 2013 OPERTIS 5 GB eLOCK APS Comfort System for Framed Doors fire protection Operating instructions ES7670F ES6670F ES7671F ES6671F ES7672F ES6672F ES7673F ES6673F 2 Product description Component parts The following drawing shows the component parts of the APS Comfort System for Framed Doors fire protection NZ u Stainless steel cover Battery M3x6 screws Housing with electronics M5x8 screws M3x9 threaded pins screwed into the mounting plate Mounting plate COIN OD
13. eys are not in the horizontals APS Comfort System for Framed Doors fire protection works faulty Antenna is defective Replace antenna Cables are crushed or pinched Replace APS Comfort System for Framed Doors fire protection Comfort System is contaminated by chips or lubricant Latch key set is oblique or mounted under pressure Replace APS Comfort System for Framed Doors fire protection Mount latch key set correctly and check for free movement Latch keys are too heavy Replace existing latch keys with lighter ones or use additional retaining springs Every identifier has locking authorisation Latches do not engage Fitting is not programmed factory setting Latch recess in the strike plate does not match the latch position of the APS Comfort System for Framed Doors fire protection Program the fitting see eLOCK system documentation software Adapt the latch recess in the strike plate to the latch position of the APS Comfort System for Framed Doors fire protection Door or door frame warped Adjust door door frame or the tapes The lock does not lock The self locking is defective Replace immediately The bolt does not retract when the inside handle or coupled outside handle is pushed The panic function is defective Replace immediately The door may no longer be closed as the panic function is no longer available
14. for Framed Doors fire protection depend on the programming The programmed fittings in the AddDelete system and the fittings programmed using eLOCK Center have a different signalling concept Note The complete visual and acoustic signals are included in the eLOCK system documentation Signalling Concept section Acoustic signal Meaning 1x ascending sound sequence Programming mode on 1x descending sound sequence End of programming mode automatic 1x short high pitch Fitting connection by authorised identifier 1x long low pitch No fitting connection identifier not authorised 1x long low 5x sound sequence short high Battery empty warning level 1 with controlled failed locking 1x long low 3x sound sequence short high Active Power Off battery completely discharged 1x short high pitch Fitting connection in construction site mode or permanent release mode see eLOCK system documentation Fitting Modes section 1x long low pitch 4x short low pitch System error Dismantle Comfort system contact OPERTIS Support 12 OPERTIS 09 2013 eLOCK Operating instructions GB APS Comfort System for Framed Doors fire protection ES7670F ES6670F ES7671F ES6671F ES7672F ES6672F ES7673F ES6673F 6 Servicing cleaning and maintenance Service cleaning and maintenance may only be carried out by qualified staff Guarantee for damage resu
15. lting from improper handling is excluded Intervals Activity Interval Cleaning and 3 months maintenance Service 1 year Cleaning and maintenance CAUTION Property damage from improper cleaning If cleaning is done incorrectly the surfaces can become attacked and damaged O Only carry out maintenance on the APS Comfort System for Framed Doors fire protection from the outside do not remove cover caps O O00 0 Do not use any cleaning agents which contain alkaline acid or chlorine Do not use any cleaning agents which contain abrasives Do not use any abrasive tools such as brushes Do not allow oils and greases to enter the inside of the electro mechanical lock Do not allow cleaning agents to enter the inside of the lock casing Proceed as follows Step Activity Image 1 Wipe surfaces with a damp cloth 2 Lightly grease the raised latch bolt on the oblique side 09 2013 OPERTIS 13 GB APS Comfort System for Framed Doors fire protection eLOCK Operating instructions ES7670F ES6670F ES7671F ES6671F ES7672F ES6672F ES7673F ES6673F Servicing A CAUTION Risk of being locked out The door cannot be opened without a functional fitting if the latch is in the lock Run functional tests with door open The following functional tests are to be carried out at least once a year Step Activity Result 1 Check the secure seating of the lock
16. st the strike plate Read the fitting information see eLOCK system documentation software 7 Problems and solutions Problem Possible cause Solution APS Comfort System Identifier is not an Use OPERTIS for Framed Doors OPERTIS identifier of identifier fire protection does not open or close Identifier is not authorisation programmed or does not have the required the locking system Program the identifier see eLOCK system documentation software Identifier is defective Replace identifier Fitting has the wrong date or wrong time Reset the time see eLOCK system documentation software Battery is empty or defective Replace battery and single operation of the APS Comfort System for Framed Doors fire protection through an identifier Provide external power supply on the outside of the APS Comfort System for Framed Doors fire protection Then replace the battery and operate the APS Comfort System for Framed Doors fire protection at least once by means of an identifier Antenna plug has become loose Fully plug in the antenna plug 09 2013 OPERTIS 15 GB eLOCK APS Comfort System for Framed Doors fire protection Operating instructions ES7670F ES6670F ES7671F ES6671F ES7672F ES6672F ES7673F ES6673F Problem Possible cause Solution APS Comfort System for Framed Doors fire protection does not open or close Latch k
17. the mounted fittings and the screws All component parts of the APS Comfort System for Framed Doors fire protection are securely fixed The latch and the release lever move smoothly Push the outside handle The outside handle is in neutral mode The latch does not retract Hold authorised OPERTIS identifier in front of the reader then push the outside handle Push the inside handle The latch retracts and rises again after it is released Check self locking Push down the release lever The lock latch and release lever should pop out The latches and the release lever can no longer be pushed down Check panic function Push inside handle when the lock is locked Check panic function Push coupled outside handle when the lock is locked The lock latch and release lever are retracted through actuation CAUTION Risk of being locked out When closing the door from the outside an authorised identifier must be available in order to subsequently reopen the door Close door from the inside The lock latch should pop out 14 OPERTIS 09 2013 eLOCK Operating instructions GB APS Comfort System for Framed Doors fire protection ES7670F ES6670F ES7671F ES6671F ES7672F ES6672F ES7673F ES6673F Step Activity Result 9 Push the inside or coupled outside handle Lock latches and release levers are retracted and the bolt must not rub again
18. to 296 30 a group of fittings Event memory authorisation 512 628 attempts 09 2013 OPERTIS 19 GB eLOCK APS Comfort System for Framed Doors fire protection Operating instructions ES7670F ES6670F ES7671F ES6671F ES7672F ES6672F ES7673F ES6673F 9 Disposal Product E Disposal in accordance with WEEE Directive 2012 19 EU O Do not dispose of the product with the local household waste O Return the product to OPERTIS or dispose at a municipal collection point for electrical hazardous waste Batteries E O Do not dispose of batteries with the local household waste but at a public battery collection point O Do not throw batteries into fire O Do not store used batteries together O Dispose of the batteries only when they are completely discharged Product packaging Dispose of the product packaging with the local household and paper waste Notes 20 OPERTIS 09 2013 eLOCK GB Operating instructions APS Comfort System for Framed Doors fire protection ES7670F ES6670F ES7671F ES6671F ES7672F ES6672F ES7673F ES6673F 09 2013 OPERTIS 21 GB eLOCK APS Comfort System for Framed Doors fire protection Operating instructions ES7670F ES6670F ES7671F ES6671F ES7672F ES6672F ES7673F ES6673F 22 OPERTIS 09 2013 eLOCK GB Operating instructions APS Comfort System for Framed Doors fire protection ES7670F ES6670F ES7671F ES6671F ES7672F ES6672F ES7673F ES6673F 09 2013 OPERTIS
Download Pdf Manuals
Related Search