Home

Operating Instructions EB 6661 EN

image

Contents

1. gt 00 07 30 00 08 20 00 09 10 j B 11 1 KC 10 01 2011 20 6661 EN Tool bars Standard Communication Offline EB 6661 EN Menu bar Meaning of icons starting on the left Create a new TROVIS VIEW file See Section 2 1 1 Open a TROVIS VIEW file See Section 2 1 2 Save a TROVIS VIEW file See Section 2 1 3 Save a TROVIS VIEW file with new name See Section 2 1 3 Cut out folders and parameters See gt Section 2 2 1 Copy folders and parameters See Section 2 2 2 Paste folders and parameters See Section 2 2 3 Print a TROVIS VIEW file See Section 2 1 4 E mail a TROVIS VIEW file See Section 2 1 6 Move up one level in the directory See Section 2 3 2 Change the zoom setting See Section 2 3 3 Open the About dialog box See Section 2 7 3 Meaning of icons starting on the left Read data from device See Section 2 4 2 Write data to device See gt Section 2 4 3 Start online mode See Section 2 4 4 The icon shown on the right appears on the tool bar during online mode of the Trend Viewer this mode runs separately from the main application 21 Menu Communication Online User level Find Wizard Meaning of icons starting on the left Read data from device See Section 2 4 2 Write data to device See gt Section 2 4 3 Start online mode See Section 2 4 4 The icon shown on
2. Alternatively save the TROVIS VIEW file by pressing Ctrl S or by clicking this icon on the tool bar 12 EB 6661 EN Alternatively open the Save As dialog box by clicking this icon on the tool bar Note D TROVIS VIEW automatically generates a systematically created file name when the box for Use automatic file name is checked in Options gt Filename See Section 2049 The No complete record from device exists warning indicates that data have not yet been uploaded from the device or that not all the data from TROVIS VIEW have been downloaded onto the device To obtain a complete record including all the changes previously made in TROVIS VIEW first download the TROVIS VIEW data to the de vice and then upload the data again 2 1 4 Printing a TROVIS VIEW file The print layout 15 optimized for a A4 page in portrait format 4 Select File gt Print The Print dialog box opens Select which data are to be printed All contents selected by default Customer data Table of contents V Comments Vl Images and graphs Print Selection v Customer data v Table of contents v Comments v Images and graphs Derer type TROVIS 8493 2 Industrial Controler name UnnemedTveDecumert TROVIS 6495 2 Industrial Controller az 15 28 2215 11 34 Printer Microsoft XPS Document Writer v Page Setup Print Range All
3. 1409753 Electronic limit switch Media 6 Differential Pressure Meter 1 No HART communication between Types 3730 3 3730 6 and Type 5006 n e L LLL LL 14009379 LLL LLL LLL 1400 9377 N 3l Co Positioners and TROVIS VIEW 8 EB 6661 EN Connecting cable RJ 12 D Sub Order no 1400 7699 Memory 64 1170 3163 Order 1400 9753 Modular adapter Order no 1400 7698 Hardware package consisting of a memory pen 64 modular Order no 1400 9998 adapter and connecting cable Infrared adapter RS 232 Order no 8864 0900 Bracket for infrared adapter Order no 1400 9769 USB cable mini B USB type A Order no 8801 7301 Isolated USB interface adapter Order 1400 9740 Serial interface adapter Order no 1400 7700 USB RS 232 adapter Order no 8812 2001 USB converter 3 Order no 1400 9377 Memory module Order no 1400 9379 Mini module Order no 1400 7436 TROVIS 5573 TROVIS 5575 UIOMATION System TROVIS 5576 TROVIS 5579 TROVIS 5610 with interface board 2b IR 2000 RJ 12 jack at front Aut ti S aa 7 TROVIS 5610 with interface board 1 USB B jack at front USB B cable req Type 3374 Electric Type 3375 actuators Type 5824 5825 with process Type 5857 controllers Type 5724 8 B
4. 5 Activate the online mode of the Trend Viewer if required Online mode of the Trend Viewer can be activated Online mode of the Trend Viewer is blocked Note D The online mode of the Trend Viewer is activated in Options Trend Viewer If the Trend Viewer is to run in its own online mode the sampling time rate for recording data must be selected Adding or removing a Trend Viewer Ed Use this icon to add a Trend Viewer to a new tab Click the tab to go to the Trend Viewer You can add as many Trend Viewers as you like Use this icon to delete a Trend Viewer 5 2 Displaying parameters in the Trend Viewer Inserting parameters into the Trend Viewer The Trend Viewer shows write enabled and non editable device parameters after they have previously been inserted into the Trend Viewer 8 Drag and drop parameters from the main window into the list of parameters in the Trend Viewer You can add as many parameters as you like into a Trend Viewer For a better overview parameters can be distributed among several Trend Viewers EB 6661 EN 53 Trend Viewer Changing the parameter representation in the graph 8 Select the parameter from the list Name Settings 45 Right click to open context sensitive menu Properties Select Settings The Settings dialog box appears visible Alternatively open the dialog box by double clicking the parameter Line color 8 Chan
5. You can cut out folders and parameters and insert them into a user defined tree See Section 223 5 Select the folder or parameter in the user defined tree 5 Select Edit gt Cut Alternatively cut out folders or parameters by pressing Ctrl X or by clicking this icon on the tool bar gt 2 2 2 Copying folders and parameters You can copy folders and parameters and insert them into a user defined tree See Section 2 2 9 45 Select the folder or parameter 8 Select Edit gt Copy Alternatively copy folders or parameters by pressing Ctrl C or by clicking this icon the tool bar 2 2 3 Pasting folders and parameters This function can only be performed in user defined trees See Section 3 Only folders or parameters that have been cut or copied beforehand can be pasted See Section 2 2 1 and Section 2 2 2 EB 6661 EN 17 Menu gt 5 Select the location in the user defined tree where the folder or parameter is to be pasted Select Edit gt Paste Alternatively paste folders or parameters by pressing Ctrl V or by clicking this icon on the tool bar 2 2 4 Editing customer data TROVIS VIEW allows you to save information on the document The date of creation and Created on Donnerstag 8 August 2013 13 09 28 revision are automatically added and cannot Changed on Do metas 45 Select
6. Edit gt Customer data to open the Customer data dialog box oo 45 Enter the required details The number of Uoc c characters is not restricted zn Click OK to save the details No complete record from device exists Location plant Note D Customer data are printed in the TROVIS VIEW document when the Customer data option is checked in the Print dialog box See Section 2 1 4 2 2 5 Loading default settings This command causes all parameters of a document to be overwritten with the default settings of the device module The command can only be performed in offline mode See Section 2 4 4 8 Select Edit gt Load Default Settings 45 Click OK to confirm the message Overwrite data 18 EB 6661 EN 2 3 View Status Bar Tree User defined Tree Trend Viewer Toolbars Up One Level Zoom Reset Layout 2 3 1 Hiding showing bars and windows Bars and windows in TROVIS VIEW can be hidden or shown as required All the bars and windows are shown in the default program layout select View Reset Layout see Section 2 3 4 All options are checked in the View menu Check or uncheck the status bar and windows in the View menu and select View gt Toolbars to show or hide tool bars or windows Status bar TROVIS 6495 2 Industrial Controller Version 1 20 1 29 The status bar shows the device module and the ver
7. Name gt Control mode Start up 2 Input Controller 1 m Output Communication Control mode General settings Information Operation display Signals W New folder Start up Q TROVIS 6495 2 Industrial Controller Control mode Input Controller 1 Output FF Communication General settings Information Operation display Signals User defined Tree LIBER E New folder EB 6661 EN Tree and user defined tree s Paste the folder parameter by clicking on TROVIS 6495 2 Industrial Controller Name gt Control mode B Start up Input Controller 1 Output Communication the icon shown here Control mode General settings Information Operation display Signals User defined Tree 1 DAG W New folder Note D You can also drag and drop folders and parameters from the TROVIS VIEW tree into the user defined tree Renaming a folder amp Select the folder in the user defined tree Right click to open context sensitive menu Select Rename folder Deleting folders and parameters 45 Select the folder or parameter in the main application 45 Right click to open a context sensitive menu 5 Select Delete selection EB 6661 EN 43 Tree and user defined tree Adding a headline Headlines arrange the parameters of a folder into individual
8. Pages 8 Select the printer you want to use Select which pages you want to print Click printer icon to start printing EB 6661 EN 13 Menu Alternatively open the Print dialog box by pressing Ctrl P or by clicking this icon on the tool bar Note D The display of the document in the dialog box can be adapted by the icons on the tool bar This does not have any effect on the actual printout layout The contents of individual folders can be printed separately See Section 3 5 Zoom in by 25 96 Zoom out by 25 96 Fit to page Fit to width Fit to height 7 3 E S Several pages 2 1 5 Converting a TROVIS VIEW file IF the current version of the TROVIS VIEW file is not the same as the version of the connected device you must convert the file to match the device version TROVIS 6495 2 Industrial Controller Version 1 20 1 29 The version of the TROVIS VIEW file appears on the info bar The version of the actual device is written on its nameplate 14 EB 6661 EN 1 Select File gt Convert gt Convert version version The Convert amp Industrial Controler version dialog box opens TROVIS 6495 2 Industrial Controller Version 1 10 8 Select version Click OK to confirm u Version 1 20 1 29 Click this icon to resize the dialog box 2 1 6 Sending a TROVIS VIEW file by e mail T
9. V 1 10 and higher Type 3731 3 with HART communication V 1 30 and higher Electropneumatic positioners with bus communication 3730 4 with PROFIBUS PA communication 1 43 K 1 00 and higher Type 3730 5 with FOUNDATION fieldbus communication 1 40 K 1 20 and higher Type 3731 5 with FOUNDATION fieldbus communication 1 45 K 1 25 and higher Electronic limit switch 3738 20 V 1 00 and higher 3738 50 A 1 00 K 1 00 and higher Transmitter Media 6 Type 5006 V 2 00 and higher TROVIS 5500 Automation System TROVIS 5573 V 2 00 and higher also earlier versions using memory module TROVIS 5575 V 2 00 and higher also earlier versions using memory module TROVIS 5576 V 2 00 and higher also earlier versions using memory module TROVIS 5578 V 2 20 and higher TROVIS 5579 V 2 00 and higher also earlier versions using memory module TROVIS 5600 Automation System TROVIS 5610 V 1 06 and higher Electric actuators 3374 V 2 00 and higher 5824 5825 V 1 03 and higher 5857 V 1 02 and higher Electric actuators with process controllers Type 5724 8 V 1 10 and higher Industrial controllers TROVIS 6493 V 2 03 and higher TROVIS 6495 2 V 1 10 and higher 6 6661 1 1 System requirements A computer with the following minimum requirements is needed Hardware PC w
10. groups Right click on the main window to open a context sensitive menu Select Add headline The headline is added above the selected area 5 Enter headline into New group field 3 Drag and drop parameters into the newly created group as required Changing a headline Select the headline in the main application Right click to open a context sensitive menu 8 Select Change headline 44 Name Start up Name 4 Start up EB 6661 EN Tree and user defined tree Deleting a headline Select the headline Press delete key to delete headline 3 2 Uploading data from a folder When TROVIS VIEW is running in the offline mode indicated by this icon on the communication tool bar communication can be established by selecting Read to specifically upload data from the connected device The command causes all the parameters of a folder and the associated subfolder to be up loaded from the device 8 Select the folder 5 Right click to open a context sensitive menu 3 Select Read gt Parameters that have been read from the device are marked in TROVIS VIEW by this symbol Similar topics Read all parameters from the device See Section 2 4 2 Read a single parameter from the device See Section 4 2 3 3 Downloading data from a folder When TROVIS VIEW is running in the offline mode indica
11. 49 Uploading a single 50 Downloading a single parameter 51 Executing parameters ee 51 Trend VIEWBE 52 Configuring Trend Viewer sese 53 Displaying parameters in the Trend Viewer 99 Configuring the 54 D leing ife 9 CAIN een 57 loading 57 Saving a diagram INTERRETE TETTE 58 Prina een TIT 58 EB 6661 EN 5 4 9 5 6 1 6 2 6 3 6 4 Contents Changing to values table 59 ERS 60 General layout adaptations eee eee eee eren eene een nnn 61 Resizing a RETE 61 Undocking and maximizing a Window 61 Closing widow 62 Hiding windows automatically 62 EB 6661 EN 5 1 General The TROVIS VIEW 4 software allows users to configure and parameterize various SAMSON devices over a common user interface It consists of the operator interface communication server SCS and the device specific module Device specific modules are available for the SAMSON products listed below Electropneumatic positioners 4 20 mA Type 3730 2 V 1 10 and higher Type 3730 3 with HART communication V 1 10 and higher Type 3730 6 with HART communication and pressure sensors
12. Recent Files Exit Some of the menu options can also be selected by clicking the corresponding icon on the tool bar see gt Section 2 3 1 by using a key combination The corresponding icons and key combinations are shown in the File menu Note The Convert Version menu option for device modules that cannot be converted is written in gray to indicate that this option cannot be selected 10 EB 6661 EN 2 1 1 Creating a new TROVIS VIEW file New TROVIS VIEW files contain the de fault values of a device module 5 Select File gt New The New Module dialog box opens Select a language The language can be changed at any time See Section 2 6 1 45 Select the module for the required firmware version Click OK to confirm gt New Module 5 Industrial Controler 3TROVIS 6493 Compact Controller 3 Version 2 03 2 09 Version 3 03 3 09 1 3 Version 4 01 4 09 TROVIS 6495 2 Industrial Controller A Version 1 10 Version 1 11 Version 1 20 1 29 No support for selected language Using default language English English dansk Menu bar OK Cancel espafiol e 200 Alternatively open the New Module dialog box by pressing Ctrl N or by clicking this icon on the tool bar EB 6661 EN Click this icon to resize the dialog box 11 Menu 2 1 2 Opening TROVIS VIEW file TROVIS VIEW 4 files have th
13. and from the memory pen to the device over local operation Only reading from memory pen possible Data can only be transferred from the mem ory pen to the device over local operation Data transfer from the device to the memory pen is blocked Only writing to memory pen possible Data can only be transferred to the memory pen from the device over local operation Data transfer from the memory pen to the device is blocked 3 Select Memory Pen gt Write The Status action dialog box automatically appears 5 Select the status action of the memory pen Click Writing EB 6661 EN 31 Menu 2 5 3 Changing the status The status determines how the memory pen is to be used when it is inserted into the device E Memory pen status Status action O Device automatically writes to memory pen Only reading from memory pen possible ORecord data time controlled QOnly writing to memory pen possible Interval 1 second duration 1 hour ORecord data event triggered The selectable status varies depending on the module Possible states include Device modules with command function e g Type 3374 and Type 5824 Electric Actuators Device reads memory pen automatically Data are transferred from the memory pen to the device Device automatically writes to memory pen Data are transferred from the device to the memory pen Record data time controlled Operating data are logged in the
14. in a folder and its subfolder from the device See Section 3 2 50 EB 6661 EN Main window 4 3 Downloading a single parameter When TROVIS VIEW is running in the offline mode indicated by this icon on the communication tool bar communication can be established by select ing Write to specifically download data to the connected device The com mand causes a single parameter from TROVIS VIEW to be downloaded on to the connected device 3 Select the parameter 5 Right click to open a context sensitive menu 4 Select Write Similar topics Write all parameters from TROVIS VIEW to the device See Section 2 4 3 Write parameters in a folder and its subfolder to the device See Section 3 3 4 4 Executing parameters f T J Parameters that can be executed are marked by these icons 45 Select the parameter that can be executed LJ gt Diagnostics gt Functions 45 Right click to open a context sensitive menu Name 4 Select Execute Communication is automat amp Start up ically established if the online mode is not Start initialization b active gt Diagnosis gt Name Diagnosis Start reference test Edit f Stop reference test Diagnosis reference i Reference test complete EB 6661 EN 51 Trend Viewer 5 Trend Viewer Trend Viewer Trend Viewer_6495 2_2011 01 log PV before filter PV after fun
15. memory pen according to a time schedule Record data event triggered Operating data are logged in the memory pen triggered by an event Device modules without command function e g TROVIS 6495 2 Industrial Controller and Media Reading from and writing to memory pen possible Data can be transferred from the de vice to the memory pen and from the memory pen to the device over local operation Only reading from memory pen possible Data can only be transferred from the mem ory pen to the device over local operation Data transfer from the device to the memory pen is blocked Only writing to memory pen possible Data can only be transferred to the memory pen from the device over local operation Data transfer from the memory pen to the device is blocked 32 EB 6661 EN gt 5 Select status Click Writing button Menu bar Select Memory Pen gt Status The Memory pen action dialog box automatically appears 2 5 4 Setting the command mode The command mode is only available in certain modules The command loaded onto the memory pen is performed as soon as the memory pen is inserted into the device The commands that can be selected vary depending on the module 5 Select Memory gt Set Command Mode The Set command mode dialog box opens gt 5 Select the command as required 5 Click Writing to confirm gt Set command mo
16. new TROVIS VIEW file Ctrl O Open saved TROVIS VIEW file Ctrl P Print TROVIS VIEW file Ctrl S Save TROVIS VIEW file Key combinations for user defined tree Ctrl C folder parameter for a user defined tree Ctrl V Insert folder parameter into a user defined tree Ctrl X Cut out folder parameter from a user defined tree F2 Rename folder or headline SAMSON AG MESS UND REGELTECHNIK Weism llerstra e 60314 Frankfurt am Main Germany Phone 49 69 4009 0 Fax 49 69 4009 1507 samson samson de www samson de EB 6661 EN 2015 04 29 English
17. 2 5 6 2 6 2 6 1 2 6 2 2 083 2 6 4 2 6 5 2 2 7 1 2 2 24 3 3 1 32 dud 3 4 4 1 4 2 4 3 4 4 5 1 9 2 5 3 5 3 1 Sous 229 9 5 3 4 Changing Ihe EN ue 32 Setting the command mode sss 33 Setting the communication port sess 99 Reading recorded data sss 34 OH OPN oti 34 34 Establishing communication with the device Generating automatic names sun 36 Showing message DOS 37 Configuring the Viewer 37 39 Opening documentation on the 39 Opening TROVIS VIEW documentation ccccccccscccsssecssecesseccsseeessecesseeeseees 39 Opening the About dialog box seen 39 Tree and user defined tree sccsccsscsssssccscsseccecsscsecssccsscsscssecsessseesecseeees 40 Creating a user defined tree sse 41 Uploading dala froma een 45 Downloading data from a 1 45 Resetting all data to defaults seen 46 Printing data from TOAST ses es eater setas S eppdeterUph 46 47 Editing paramers
18. 2011 01 log Dateiname Dateityp 8 Perform print settings and start printing See Section 2 1 4 EB 6661 EN Trend Viewer 5 4 Changing to values table Trend Viewer Neuer Ordner Trend Viewer 6495 2 2011 01log 666 t d hh mm ss PV before filler after filter 3 00 06 42 608 A 100 mn 4 00 06 43 503 10 0 5 00 06 44 403 10 0 6 00 06 45 308 10 0 7 00 06 46 207 10 0 8 00 06 47 103 10 0 9 00 06 48 014 0 0 10 00 06 48 910 10 0 11 00 06 49 833 10 0 12 00 06 50 733 10 0 13 00 06 51 240 00 14 00 06 52 438 10 0 15 00 06 52 746 125 16 00 06 53 337 10 0 125 18 00 06 54 252 10 0 19 00 06 54 55p9 125 20 00 06 55 202 Values Table The values table contains all the measured data together with a time stamp of the parameters used in the Trend Viewer 4 Select Values Table tab This icon is used to update the data of the values table Note D The time stamp is based on the starting time when the online mode of the Trend Viewer started This starting time is indicated in the Trend Viewer diagram by tO EB 6661 EN 59 Trend Viewer 5 5 Exporting data File format 8 Select which file format is to be used Select which decimal separator is to be used Select which x values column is be used D Select which time format for the x axis is to b
19. IEW 4 1 savedin a file and has now been reread into TROVIS VIEW from the file v From file The value originates from a file that has been saved F d From memory pen The value has been adopted from the memory pen x Impermissible or invalid value Error Value outside range top Value outside range bottom Note D An icon is not assigned to a parameter before it has been edited in TROVIS VIEW default setting or data have not yet been uploaded from the device 48 EB 6661 EN Main window 4 1 Editing parameters m Parameters that can be edited are marked by these icons These parameters can be edited in TROVIS VIEW YA Select the parameter gt gt Controller 1 Control function Control behaviour Name Value Unit 45 Right click to open a context sensitive Control behaviour menu Control Algorithm PI A Select Edit i Proportional action coefficient Reset time integral time Read The Change parameters dialog box Operating point Write opens Default PI Alternatively open the dialog box by double clicking the parameter Parameters with selectable values gt Change parameters Name Control Algorithm 45 Select value from drop down list Click OK to confirm value Parameter with specified range gt Change parameters 23 45 Enter the value within the defined range or adjust it ov
20. TROVIS VIEW 4 Software TROVIS 6661 TROVIS VIEW Operating Instructions gt TROVIS r Edition January 2015 Definition of signal words DANGER NOTICE Hazardous situations which if not Property damage message or mal avoided will result in death or seri function ous Injury _ aa Note WARNING Additional information Hazardous situations which if not avoided could result in death or se rious inj Aye p jury P R ecommended action 2 EB 6661 EN 1 1 1 1 2 1 3 2 2 1 2 1 1 2 1 2 2 1 3 2 1 4 2 1 5 2 1 6 2 1 8 2 1 9 2 2 2 2 2 2 2 2 2 3 2 2 4 2 2 5 2 3 2 3 2 2 2 2 3 3 2 3 4 2 4 2 4 2 4 2 2 4 3 2 4 4 2 4 5 2 4 6 2 9 2 5 1 2 5 2 Contents oi 6 7 Installing Ihe ne aai eaa 7 Accessories for data transmission trennen 8 Mena ee E 10 ae eee essen cee 10 Creating a new TROVIS VIEW file esse 1 Opening a TROVIS 12 Saving TROVIS VIEW 12 Printing a IROYIS VIEW anne 13 Converting a TROVIS VIEW 14 Sending a TROVIS VIEW file by e mail eee 15 Potling a VIEW WG 15 Opening the most recently open
21. an be ser leve changed User level 45 Enter the currently valid password De 8 Click option Change password a P 355355 5 Enter the new password twice Enter new password Confirm new password A Change password Enter new password 8 Click Change password button to save new EEE password ecce Change password Note D The changed password remains saved even after loading the default settings 2 4 2 Reading data from the device Reading data from the device causes the complete data record to be uploaded from the device 5 Select Device gt Read Alternatively read dota from the device by clicking this icon on the communication tool bar Parameters that have been read from the device are marked in TROVIS VIEW by this symbol EB 6661 EN 25 Menu Similar topics Read parameters in a folder and its subfolder from the device See Section 3 2 Read a single parameter from the device See Section 4 2 2 4 3 Writing data to the device Writing data to the device causes the complete data record to be downloaded to the device 4 Select Device gt Write Alternatively write data to the device by clicking this icon on the communication tool bar Similar topics Write parameters in a folder and its subfolders to the device See Section 3 3 Write a single parameter to the device See Section 4 3 2 4 4 Starting the online mod
22. bar EB 6661 EN 39 Tree and user defined tree 3 Tree and user defined tree Tree The tree structure of TROVIS VIEW is fixed and cannot be changed All the module specific parameters are arranged in folders and their subfolders The contents of the selected folder appear in the main window See Section 4 After opening a file only the main folders are shown in the tree Click to ex the folder and show its subfolders Click to collapse the folder tree Control mode Input Controller 1 Output Communication General settings Information Operation display Signals Note The tree structure cannot be changed Create a user defined tree with selected contents and a different structure in the User defined Tree window The Tree window is located on the left hand side below the status bar in the default program layout User defined tree The user defined tree can be created as required to show parameters and folders from the TROVIS VIEW tree The user defined tree shown in a new TROVIS VIEW file depends on the module If a user defined tree has been created beforehand for the same module the same tree appears automatically in a new TRO VIS VIEW file The User defined Tree window is located underneath the Tree window in the default program layout 40 User defined Tree EB 6661 EN Tree and user defined tree 3 1 Creating a user de
23. can be changed in the BB Deutsch offline mode Z B English Select Options gt Language and choose dansk th e anguage from th e list Modulet er ikke tilgaengelig i valgte sprog espanol v indicates which language is active 34 EB 6661 EN 2 6 2 Establishing communication with the device Perform the action described once after opening a document to allow TROVIS VIEW to find the connected device Note on Bluetooth communication For communication over Bluetooth the connection to the device must be established using the software included with the Bluetooth adapter If an adapter with legacy pairing Bluetooth version 2 0 is used you first need to enter the coupling code 1234 This is not needed for a Bluetooth adapter with secure simple pairing Bluetooth version 2 1 and higher SAMSON devices usually announce themselves to a computer with name made up from the type and serial number e g SAMSON5724 8_ Devices with older firmware versions may however use the name of the Bluetooth chip manufacturer on announcing themselves Select Options gt Communication The Communication dialog box opens 8 Click Server settings to open the Server settings dialog box A Select the connection Local connection when the communication server SCS and TROVIS VIEW run on the same computer TCP IP connection when the co
24. creen 2 3 4 Resetting the layout This command resets the layout of TROVIS VIEW to default Select View gt Reset Layout EB 6661 EN 23 Menu 2 4 Devicel User Level Read Write Online Mode Addressing A Init Wizard 2 4 1 Changing the user level Right of access to certain folders and parameters is assigned in some modules depending on the user level The default user level is displayed after opening a new TROVIS VIEW file Modules have dif ferent default user levels for example Customer Maintenance technician or Specialist De pending on the module it may be possible to change to another user level with extended read write access Refer to the mounting and operating instructions of the device for more details The user level can only be changed when TROVIS VIEW and the device are not connected in offline mode See gt Section 2 4 4 8 Select Device gt User Level to open the User level BZES dialog box User level 5 Select or enter the user level un 8 To change from the default user level sein enter password Click OK to confirm user level v Change password Alternatively open the User level dialog box by clicking this icon on the tool bar 24 EB 6661 EN Note D The user level can be selected directly from the drop down list on the tool bar Changing the password The default password is samson The password c
25. ction generation Diagram es t d hh mm ss Values Table 00 07 30 00 08 20 00 09 10 D t0 15 13 23 10 01 2011 The Trend Viewer only appears when it has been activated lt in the View menu See gt Sec tion 2 3 In the Trend Viewer the values of all write enabled parameters as well as all device parameters that cannot be edited can be displayed as a graph plotted over time or in a val ues table Approximately one million 22 values per data point can be logged at a time At a sampling rate of one second the maximum logging duration is approx 12 days After this the 16000 2 4 oldest values are automatically deleted to provide more space for new values Values can only be recorded and displayed when the online mode for TROVIS VIEW or the Trend Viewer are active This icon indicates that the online mode of TROVIS VIEW is active Values are only recorded when the Online with main application option is checked in Options gt Trend Viewer This icon indicates that the online mode of the Trend Viewer is active Values are only recorded when the Trend Viewer online mode sampling time option is checked in Options gt Trend Viewer Note D The Trend Viewer settings are configured in Options gt Trend Viewer See gt Section 2 0 2 52 EB 6661 EN Trend Viewer 5 1 Configuring the Trend Viewer gt 3 Double click Neuer Ordner field to name the Trend Viewer gt
26. de Status action O Actuator stem retracts O Actuator stem extends 2 5 5 Setting the communication port Perform the action described once whenever TROVIS VIEW cannot find the connected memory pen 8 Select Memory Pen gt Communica tion Port The Settings dialog box appears 4 Click Start to start automatic detection The status changes to Device found at COM if TROVIS VIEW finds the connected to the computer Click OK to confirm the communication settings memory pen EB 6661 EN Settings COM USB port COM3 v Automatic detection Cancel Status not yet detected Cancel 33 Menu 2 5 6 Reading recorded data Data logged on the memory pen by the action TER Record data time controlled Record data Den event triggered can be saved ina LOG file in 1 VIS VIEW a Select Memory Pen gt Read recorded data 2 After checking the memory pen and the data saved on it TROVIS VIEW uploads the logged pss data After reading all the data the Save As dialog box opens O ee Eee 8 Select the location from the drop down list where the file is to saved 9 Enter the file name 5 Click Save to save data 2 6 Options Options Language Communication File Name Show Message Boxes Trend Viewer 2 6 1 Changing the language The language setting
27. e by clicking this icon on the communication tool bar zm In offline mode this icon is not animated on the communication tool bar EB 6661 EN 27 Menu 2 4 5 Setting the device address We recommend to use the serial number of devices that can be connected to TROVIS VIEW over an infrared interface to address them This is particularly recommendable when several devices of the same type are located within range of the infrared adapter Addressing Welcome to the device addressing wizard Only one device within reach no serial number used for addressing Select Device gt Addressing The wizard for device addressing opens Follow the instructions 2 4 6 Perform settings using the wizard In some modules a device connected to TROVIS VIEW can be configured step by step using the start up wizard NOTICE It is not possible to restore the configuration saved in TROVIS VIEW or in the device itself that was valid before performing the start up using the start up wizard Se Init Wizard Welcome Welcome to Init Wizard This wizard will help you during the initialization of 3730 3 gt 3 Select Device gt Start up wizard The Start up wizard dialog box opens gt 8 Follow the instructions 28 EB 6661 EN Alternatively start the wizard by clicking this icon on the wizard tool bar 2 5 Memory The Memory pen menu is on
28. e filename extension tro plus a device group identification code for example tro_64xx for the industrial controllers TROVIS VIEW 3 files have the filename extension tro without a device group identification code These files can also be opened in TROVIS VIEW 8 Select File gt Open The Open dialog box opens 45 Select the location from the drop down list where the file is stored 45 Select the TROVIS VIEW file you want 45 Click Open to open the TROVIS VIEW file Suchen in TROVIS VIEW E3 BML VIEW4 6495 2011 Feb 11 tro 64xx VIEW4 6495 2011 Jan 10 tro 64xx ete VIEW4 6495 2011 Jan 12 tro 64xx Netzwerkumgeb Dateiname ung Dateityp Alternatively open the Open dialog box by pressing Ctrl O or by clicking this icon on the tool bar 2 1 3 Saving a TROVIS VIEW file TROVIS VIEW 4 files are saved using the filename extension tro 4 Select File gt Save If a TROVIS VIEW file is to remain saved save the new TROVIS VIEW file under another name 45 Select File gt Save As The Save As dialog box opens 8 Select the location from the drop down list where the file is to be saved Enter a file name Click Save to save the TROVIS VIEW file Speichern unter Speichem in TROVIS VIEW e Fay BML VIEW4 6495 2011 Feb 11 tro 64xx im VIEW4 6495 2011 Jan 10 tro 64xx ete VIEW 4 6495 2011 Jan 12 tro 64xx
29. e of the main application In online mode communication is established permanently between the device and TRO VIS VIEW All the configuration and operating data are transferred cyclically from the device and displayed in TROVIS VIEW Any changes performed in TROVIS VIEW are directly down loaded onto the device A separate online mode for the Trend Viewer can be set in Options Trend Viewer This allows the online mode of the Trend Viewer to be started separately the main application See Section 2 6 5 Starting the online mode of the main application 4 Select Device gt Online Mode 26 EB 6661 EN Alternatively start the online mode by clicking this icon on the communication tool bar In online mode this animated icon appears on the communication tool bar Note If TROVIS VIEW is unable to find the device check the server and communication set tings See Section 2 6 2 The online mode can only run when the version of the TROVIS VIEW file matches that of the device A conversion must be performed to start the online mode if this action is possible SAMSON TROVIS VIEW 4 G gt Device version does not match module version Device in version Version 1 11 Module in version Version 1 10 Convert module version Convert version Cancel Exiting the online mode of the main application 4 Select Device gt v Online Mode Alternatively exit the online mod
30. e used Click Export to start data export The Export dialog box opens lt Select the location from the drop down list where the file is to be saved Click Save to save data 60 EB 6661 EN General layout adaptations 6 General layout adaptations 6 1 Resizing a window 4 h This icon allows you to change the window size in the horizontal direction 8 Place the mouse cursor on the left or right edge of a window until the mouse cursor chang es to a horizontal two headed arrow Click and hold the left mouse button down to resize the window s width This icon allows you to change the window size in the vertical direction Place the mouse cursor on the top or bottom edge of a window until the mouse cursor changes to a vertical two headed arrow 8 Click and hold the left mouse button down to resize the window s length 6 2 Undocking and maximizing a window The Tree User defined Tree and Trend Viewer windows can be un docked to show them separately from the program layout This ac tion causes the corresponding window to be undocked allowing its size and position to be changed as required Maximizing the window size causes the window size to be resized to fill the en tire screen 45 Select V gt Maximize gt Dock in the top window bar or from the context sensitive menu after right clicking on the window bar Maximize v Dock Close Windo
31. ed TROVIS VIEW file 16 Exiting IROVIS VIEW nenne rare near 16 H 17 Cutting out folders and parameters sss 17 Copying folders and parameters essen 17 Pasting folders and parameters ccccecccssscessecsscessecesccsecessecsesenseesseeenaees 17 Editing US RR 18 Loading default settings 18 N 19 Hiding showing bars and 5 19 Moving up one level in the 22 Changing Ihe zoom 23 Resetting the layout 23 7 24 Changing the user 24 Reading data from the device sene 25 Writing data to the device nennen 26 Starting the online mode of the main 26 Setting the device address sss 28 Perform settings using the 28 Memory 29 Reading data from the memory pen 30 Writingdata to the memory Beli 21 EB 6661 EN 3 Contents 293 2 5 4 2 5 5
32. er the and scale Range Click OK to confirm value EB 6661 EN 49 Main window Fast setting of default minimum and CZ gt Controller 1 gt Control function gt Control behaviour maximum value Name Control behaviour Select the parameter Control Algorithm Right click to open a context sensitive ProportionaFaction c menu Reset time integra xw Operating point Write Select option Default 1 00 Default Reset the parameter to the Min 0 01 indicated default setting Min Resets the parameter to the indicated minimum value only for parameters with a specified range Max Resets the parameter to the indicated maximum value only for parameters with a specified range Options written in gray indicate that the value is the same as the optional setting 4 2 Uploading a single parameter When TROVIS VIEW is running in the offline mode indicated by this icon on the communication tool bar communication can be established by selecting Read to specifically upload data from the connected device The command causes a single parameter to be uploaded from the device 3 Select the parameter 5 Right click to open a context sensitive menu 4 Select Read Uploaded parameters are marked by this icon from device Similar topics Read all parameters from the device See Section 2 4 2 Read parameters
33. fined tree The user defined tree is created from the parameters of the specified module specific tree New folders can be added or existing folders including their contents can be copied from the tree and inserted into the user defined tree Adding a folder Place the mouse cursor in the User defined User defined Tree Tree window LB i 45 Right click to open context sensitive menu 3 Select Add folder Reset file to defaults A New folder is created User defined Tree D Name the folder 4 amp Click on this icon to confirm the added folder Num m Note D To add subfolders select the folder from one level higher up before opening the con text sensitive menu NER folder CE Deleting a folder All the associated subfolders and parameters are deleted on deleting a folder 8 Select the folder Right click to open a context sensitive menu 8 Select Delete folder EB 6661 EN Al Tree and user defined tree Copying and pasting folders and parameters All the associated subfolders and parameters are copied and pasted on copying and pasting a folder 45 Select the folder or param eter in the TROVIS VIEW tree 8 the folder or parame ter by clicking on this icon 41 8 Select the location in the user defined tree where the folder or parameter is to be pasted 42 TROVIS 6495 2 Industrial Controller
34. ge the properties of the lines and points Click OK to confirm Note If the Visible box is not checked the parameter is not displayed in the diagram The parameter still appears in the Values Table Deleting parameters 45 Select the parameter from the list Name Right click to open a context sensitive menu 4 Select Delete 5 3 Configuring the diagram The standard diagram settings cause the entire adjustment range on the y axis vertical ax is to be visible The visible range of the x axis horizontal axis is determined by the window width of the diagram Unlocking the zoom and scroll function for the y axis only relevant when the Trend Viewer diagram has more than one y axis This icon indicates that the y axes of the Trend Viewer are linked with one anoth er You cannot zoom and scroll within a single axis Click the icon to unlink the y axes This icon indicates that the y axes are unlinked It allows you to zoom and scroll within a single axis Click the icon to link the y axes with one another 54 EB 6661 EN Trend Viewer Selecting a single value Click Select icon Shifting display section Sa 5 Click the icon to shift display section 75 Place the mouse cursor on the x axis until the hand tool appears 5 Keep the left mouse key pressed down to shift the x axis to the left or right Zooming in This icon is used to st
35. he TROVIS VIEW files with the filename extension tro_ can be attached to an e mail sent by the e mail program installed on the computer Select File gt Send by E mail Alternatively open the e mail program by clicking this icon on the tool bar 2 1 7 Exporting a TROVIS VIEW file The document is exported as an XML file Speichern unter e Speichern in Ey rmvevEw ex 8 Select File gt Export to open the Save As nn VIEW4 6495 2011 Jan 10 tro 64 xx xml dialog box Ms sid VIEW4_6495_2011 Jan 12 tro_64xx xml 8 Select the location from the drop down list where the file is to be saved Enter a file name 3 Click Save to export the document EB 6661 EN 15 Menu 2 1 8 Opening the most recently opened TROVIS VIEW file The Recent files option allows you to access the most recently opened TROVIS VIEW files with out having to search through folders on your hard drive 45 Select the TROVIS VIEW file by selecting File gt Recent files 2 1 9 Exiting TROVIS VIEW 5 Select File gt Exit x Alternatively exit TROVIS VIEW by clicking this icon on the title bar 16 EB 6661 EN 2 2 Edit d Cut Ctrl X Ctrl C Paste Ctrl V Customer Data Load Default Settings 2 2 1 Cutting out folders and parameters This function can only be performed in user defined trees See Section 3
36. ith Pentium processor or equivalent 1 GHz or faster at least 512 MB RAM RS 232 serial interface or USB port using a USB RS 232 adapter and suitable hard ware depending on the SAMSON device used 1 GB hard drive space for x86 and 2 GB hard drive space for x64 including space to install Microsoft NET Framework 4 0 For communication over Bluetooth e g Type 5724 8 Internal or external Bluetooth adapter Bluetooth version 2 1 and higher Software Operating system Windows XP SP3 Windows Vista SP1 Windows 7 Windows 8 and 8 1 only up to Windows 7 in conjunction with USB drivers for isolated USB interface adapter and SAMSON USB devices Administrator rights required to install the software Microsoft NET Framework 4 0 client profile PDF reader 1 2 Installing the software Note concerning the installation from a downloaded ZIP file Download and unzip the ZIP file on your system before starting the installation You can download the file free of charge from our website at www samson de gt Services gt Software Note concerning the installation from a CD ROM inserted the CD ROM starts the installation program automatically depending on the configuration of the operating system You do not need to run the setup exe 5 If necessary start the installation from the setup exe gt 5 Follow the on screen prompts and instructions of the installation prog
37. le name Ce v Use automatic file name Parameter T Type 6495 96D Date 2013 Aug 08 y Date 2013 v Date 08 v d Date 08 961P Serial number CPU read only Format VIEW4_ T_ y m d Preview VIEW4_6495_2013 08 08 tro_64xx EB 6661 EN Note D The automatically generated file name can still be changed on saving the TROVIS VIEW file regardless of the settings made here 2 6 4 Showing message boxes By checking the Do not show this message again box 11 the last response to the message is saved In the event of a message it is no longer shown In order to show the message again the saved automatic response must be deleted 8 Select Options gt Show Message Boxes Select message Click Show message again 4 amp Click OK 2 6 5 Configuring the Trend Viewer Load diagram Load Trend Viewer default settings Online with main application v Trend Viewer online mode sampling time 2 Record all points X Optimize values Loading a diagram Trend Viewer files are saved using the filename ex tension log Suchen in EyrmvevEw e E3 E Trend Viewer 3730 6 2010 12 log 8 Trend Viewer 6495 2 2011 01 log Select Options gt Trend Viewer gt Load diagram The Load diagram dialog box opens 8 Select the directory from the drop down list where the file is
38. les are saved using the filename ex GESIS n Suchen in EyrmvevEw ex tension og E Trend Viewer 3730 6 2010 12 log El Trend viewer_6495 2_2011 01 log 3 Place the mouse cursor on the Trend Viewer 3 Right click to open a context sensitive menu 3 Select Load diagram The Load diagram dialog box opens 8 Select the directory from the drop down list where the file is stored Trend Viewer 6435 2 2011 01 log log 5 Select the file you want to open Click Open to load diagram EB 6661 EN 57 Trend Viewer 5 3 3 Saving a diagram Trend Viewer files are saved using the filename ex tension log 3 Place the mouse cursor on the Trend Viewer Right click to open a context sensitive menu 8 Select Save diagram The Save As dialog box opens 8 Select the location from the drop down list where the file is to be saved 9 Enter the file name Click Save to save diagram 5 3 4 Printing a diagram 3 Place the mouse cursor on the Trend Viewer 45 Right click to open context sensitive menu 58 Speichern unter Speichen in CQ TROVIS VIEW eg ex Far Zuletzt verwendete D Desktop Eigene Datei Arbeitsplatz Netzwerkumgeb un Select Print diagram The Print dialog box opens Trend Viewer 3730 6 2010 12 log Trend Viewer 6495 2
39. luetooth communication 5757 7 TROVIS 6493 Industrial TROVIS 6495 2 without board controllers TROVIS 6495 2 with RS 232 USB board TROVIS 6495 2 with RS 485 USB board J tele fe 14007436 fete 1400 9379 L fete te 1400 9377 ele e 18812 20011 u 114007700 1140059740 ele 188017301 J LLLL 1400 9769 el 1400 9698 ef el 1e 14009753 EB 6661 EN 9 Menu 2 Menu bar The menu bar for all device specific modules includes the following menus File Edit View Device Options and The Memory pen menu is only visible for modules that allow the use of a memory pen See Section 1 3 gt SAMSON TROVIS VIEW 4 File Edit View Device Memory Pen Options Menus and menu options can be selected using the mouse or computer keyboard Press Alt to gether with the key assigned to the menu or menu option to select the menu or menu option over the keyboard The underlined letters of the menus and menu options correspond with the keyboard keys that must be pressed in conjunction with the Alt key e g Alt F for File gt SAMSON TROVIS VIEW 4 File Edit View Device Memory Pen Options 2 1 File menu New Ctrl N Ctrl O Save Ctrl S Save As gt Print Ctrl P Convert Version 127 Send By E mail Export
40. ly available when a memory pen can be inserted into the device Memory Pen Read Write Status Set Command Mode Read Recorded Data Communication Port The memory pen serves as data carrier and is able to load and store data its non volatile memory The functions of the memory pen described in following are only guaranteed if the memory pen 64 order 1400 9753 is used See Section 1 3 Copying function The memory pen can be loaded with data configured in TROVIS VIEW and the configuration data transferred to one or several devices of the same type and version Additionally the data from the device can be written to the memory pen This allows the con figuration data to be simply copied from one device and loaded onto other devices of the same type and version Data logging Device data are logged until the memory pen is full The data logged in the memory pen can be read out in TROVIS VIEW and saved to a LOG file See Section 2 5 6 Command mode A command is downloaded onto the memory pen and transferred onto the device See Sec tion 2 5 4 EB 6661 EN 29 Menu The functions of the memory pen vary depending on the device used See gt Section Bea To use the memory pen Connect the modular adapter order 1400 7698 Section 1 3 directly to the COM port of a computer or connect it using a USB RS 232 adapter order no 8812 2001 to
41. mmunication server SCS and TROVIS VIEW run on different computers amp Click OK to confirm the server set tings The Server settings dialog box closes EB 6661 EN Communication Module Protocol for SAMSON devices V5 00 v Connection settings Server settings 9 Local connection OTCP IP connection 127 0 0 1 56000 35 Menu Click Connection settings to open the Connection settings dialog box Click Start to start automatic detection The status changes to Device found at COM if TROVIS VIEW finds the device connected to the computer Click OK to confirm the communication settings The Settings dialog box closes Click OK to confirm the communica tion settings Settings COM USB port Automatic detection Cancel Status not yet detected 2 6 3 Generating automatic file names If required the file name can be automat ically generated on saving the latest ver sion of a TROVIS VIEW document Users can determine which details are to be used to generate the file name 75 Select Options gt File Name The dialog box as shown here opens Check the Use automatic file name box 1 5 Select details to be used in the automatically generated file name Type D Date y Date year m Date month d Date day 1P Serial 2 Tag no Click OK to confirm 36 gt Fi
42. ram 1 Not dll device types can communicate over Bluetooth More details are included in the mounting and operating instructions of the device Bluetooth communication is not possible if these instructions do not contain any information on this topic EB 6661 EN 7 1 3 Accessories for data transmission The accessories listed below are available to transfer data between the SAMSON device and the computer The accessories used depend on the device Connecting cable RJ 12 D Sub Order 1400 7699 Memory pen 64 1170 3163 Order no 1400 9753 Modular adapter Order no 1400 7698 Hardware package consisting of a memory pen 64 modular Order no 1400 9998 adapter and connecting cable Infrared adapter RS 232 Order no 8864 0900 Bracket for infrared adapter Order no 1400 9769 USB cable mini B USB type A Order no 8801 7301 Isolated USB interface adapter Order no 1400 9740 Serial interface adapter Order no 1400 7700 USB RS 232 adapter Order no 8812 2001 USB converter 3 Order no 1400 9377 Memory module Order no 1400 9379 Mini module Order no 1400 7436 1400 7699 Type 3730 2 Electropneumatic positioners Type 3730 3 4 20 mA Type 3730 6 Type 3731 3 Type 3730 4 Type 3730 5 Type 3731 5 Type 3738 20 Type 3738 50 Electropneumatic positioners with bus communication 1400 9698
43. retch the axes amp Click the icon to zoom in Place the mouse cursor on an axis or in the middle of the diagram until the magnifying glass tool appears 0 Click to zoom in EB 6661 EN 55 Trend Viewer Zooming out gt This icon is used to zoom out the axes YB Click the icon to zoom out 8 Place the mouse cursor on an axis or in the middle of the diagram until the magnifying glass tool appears 3 Click to zoom out Sizing all axes to match data contents E This icon allows the entire value range of the parameters to be displayed Click the icon to size all axes to match data contents Resetting all axes to start values This icon allows you to show the entire value range of the parameter to be dis played on the y axis The x axis starts at 00 00 00 hh mm ss and is reset to the default scaling which is determined by the window width of the diagram 8 Click the icon for resetting all axes to start values 56 EB 6661 EN Trend Viewer 5 3 1 Deleting a diagram The Delete diagram command causes the current Trend Viewer diagram values table and list of parameters to be deleted 3 Place the mouse cursor on the Trend Viewer Right click to open a context sensitive menu Sa 3 Select Delete diagram Alternatively exit the Trend Viewer by clicking this icon on the tab 5 3 2 Loading a diagram Trend Viewer fi
44. sion of the current TROVIS VIEW file If the current version of the TROVIS VIEW file is not the same as the version of the connected device the TROVIS VIEW file must be converted to match the device version File gt Convert Version See Section 2 1 5 Depending on the module the operating state or condensed state of the device are also in dicated on the status bar Refer to the mounting and operating instructions of the device for more details Tree The tree is located on the left hand side below the sta li Control mode tus bar in the default program layout It contains all Input the folders and subfolders of a module Controller 1 Output Communication General settings EB 6661 EN 19 Menu User defined tree TUER The user defined tree is located on the left hand side jm below the tree window in the default program layout The user defined tree shown in a new TROVIS VIEW file depends on the module If a user defined tree has been created beforehand for the same module the same tree appears automatically in a new TRO VIS VIEW file Trend Viewer The Trend Viewer is located in the bottom of the window in the default program layout It con tains a chart of the operating data in online mode see gt Section 2 4 4 Trend Viewer Trend Viewer 6495 2 2011 01 og a Name PV before filter PV after function generation 25 Diagram t d hh mm ss ES
45. stored 5 Select the file you want to open Click Open to load diagram EB 6661 EN 37 Menu Loading Trend Viewer default settings Loading the default settings of the Trend Viewer causes all data from the Trend Viewer to be de leted The Trend Viewer is shown in the default layout with its default data points 45 Select Options gt Trend Viewer gt Load Trend Viewer default settings Selecting online mode The Trend Viewer can be run in online mode together with the main application or separately Running the online mode together with main application The refresh rate depends on the total number of data points currently being displayed i e including those shown in the main application The refresh rate may be slower depending on the number of the data points shown in the main window Data recording finishes as soon as the online mode of the main application is ended Select Options gt Trend Viewer gt Online with main application Running the online mode separately from the main application The values of the Trend Viewer are logged according to the selected sampling time rate The sampling time can be adjusted within a range from Minimal fastest possible rate to 300 s 45 Select the sampling time from Options gt Trend Viewer gt Trend Viewer online mode sam pling time v indicates active online mode This icon appears on the communication tool bar d
46. ted by this icon on the communication tool bar communication can be established by select ing Write to specifically download data to the connected device The com mand causes all the parameters of a folder and the associated subfolder to be downloaded to the device EB 6661 EN 45 Tree and user defined tree gt 3 Select the folder Right click to open a context sensitive menu Sah Sah 5 Select Write Similar topics Write all parameters from TROVIS VIEW to the device See gt Section 2 4 3 Write a single parameter to the device See Section 4 3 3 4 Resetting all data to defaults The Reset all data to defaults command causes all write enabled parameters of a folder and the associated subfolders to be reset to their default settings The default values are defined for every write enabled parameter of a device module 3 Select the folder gt Right click to open context sensitive menu Select Reset all data to defaults Similar topics Reset all parameters to their default settings See Section 2 4 Reset single parameter to its default setting See Section 4 1 3 5 Printing data from a folder The Print command causes all the parameters of a folder and the associated subfolders to be printed Select the folder 45 Right click to open context sensitive menu gt Sa 5 Select Print The Print dialog bo
47. the USB port of the computer Set the communication port See Section 2 5 5 2 5 1 Reading data from the memory pen TROVIS VIEW 4 uploads the complete data record from the memory pen Note Data can only uploaded memory pens which contain data from the open TROVIS VIEW file Data cannot be uploaded from memory pens that have been configured as command pens Select Memory gt Read F Parameters that have been read from the device are marked in TROVIS VIEW by this symbol 30 EB 6661 EN 2 5 2 Writing data to the memory pen This command allows data from TROVIS VIEW to be downloaded onto the memory pen In the Status action dialog box the direction in which data are to be transferred between the mem ory pen device is determined Write to memory pen Status action QOnly writing to memory pen possible The status and actions vary depending on the module used Possible states and actions include Devices without local operation e g Type 3374 and Type 5824 Electric Actuators Device reads memory pen automatically Data are transferred from the memory pen to the device Device automatically writes to memory pen Data are transferred from the device to the memory pen Devices with local operation e g TROVIS 6495 2 Industrial Controller and Media Reading from and writing to memory pen possible Data can be transferred from the de vice to the memory pen
48. the right appears on the tool bar during online mode of the Trend Viewer this mode runs separately from the main application Maintenance technician nd d tool bar depending on module Change the user level See Section 2 4 1 Search for a parameter or folder within the document A Enter search term Sa 5 Start search by clicking the magnifying glass icon or with F3 Note D Search terms that do not exist in the current document are highlighted in red tool bar depending on module The wizard guides you through the process of setting up the device step by step 2 3 2 Moving up one level in the directory Moving up one level in the directory is only possible when a subfolder containing parameters or other subfolders is shown in the main window Select View gt Up One level Alternatively move up one level in the directory by clicking this icon on the tool bar 22 EB 6661 EN 2 3 3 Changing the zoom setting You can zoom in or out of the program window within the range between 75 and 200 Select View gt Zoom to open the Zoom izuusss cs dialog box T Set zoom or change text sharpness setting Click OK to confirm Alternatively open the Zoom dialog box by by clicking this icon on the tool bar Note D Decrease the zoom setting when not all the windows or tool bars appear on the s
49. uring online mode of the Trend Viewer this mode runs separately from the main application Selecting how the logged values are to be shown in the graph The values logged in the Trend Viewer can be shown in the graph exactly as they are record ed or in optimized form In the optimized form in addition to the first and last visible values only the values that have changed since the last recording are shown Select menu option Options Trend Viewer Record all points or Options Trend Viewer Optimize values v indicates which graph form is active 38 EB 6661 EN 2 7 Help 2 7 1 Opening documentation on the device PDF documents for the device module are saved in TROVIS VIEW Select 2 gt Documentation to open documentation on the device Note The most recent documentation is available on the SAMSON website htto www samson de 2 7 2 Opening TROVIS VIEW documentation PDF files of these Operating Instructions EB 6661 EN and the associated Data Sheet T 6661 EN can be viewed in TROVIS VIEW 8 Select 2 Help 2 7 3 Opening the About dialog box If you have any questions about this software the following details must be submitted TROVIS VIEW version Module version Microsoft NET Runtime version Details on TROVIS VIEW 4 are listed in the dialog box Select 2 gt About Alternatively open the About dialog box by clicking this icon on the tool
50. w docking An undocked window can be redocked in another position on the program layout Position the window with the mouse anywhere on the program layout EB 6661 EN 61 General layout adaptations IE This icon shows all possible docking positions Note D Select View Reset Layout to reset how the window looks to the default program layout See Section 2 3 4 6 3 Closing windows Click W gt Close to close a window Alternatively the window can be closed by clicking this icon on the window title AX bar Opening windows Open a closed window by selecting View gt Tree or View gt User defined Tree See gt Sec tion 2 3 4 6 4 Hiding windows automatically A hidden window is only shown as a tab at the window s original position in the program layout Place the mouse cursor over the tab to open the window Remove the mouse cursor to close the window again This icon located on the top window bar allows you to hide a window EZ This icon allows you to show a window permanently in the program layout Note D Select View Reset Layout to reset how the window looks to the default program lay out See Section 2 3 4 62 EB 6661 EN Key combinations for menus AlttD Open the Device menu Open the Edit menu Alt F the File menu AlttO Open the Options menu Alt V Open the View menu Alt Open the Help menu Key combinations for TROVIS VIEW files Ctrl N Open
51. x opens 8 Perform print settings and start printing See Section 2 1 4 46 EB 6661 EN Main window A Main window The parameters and subfolders of a folder selected in the Tree or User defined Tree are shown in the main window The parameters are assigned to different classes which are identified by icons en Parameter can be written to the device The parameter can be edited and written to the device m Device parameter cannot be edited The parameter is read from the device i Parameter can be executed in the device 4 53 Device parameter that can be edited but not written to the device Note D Device parameters that cannot be edited are marked until the parameter is uploaded from the connected device Various icons in the column indicate the source from which TROVIS VIEW has received the parameter values If a parameter is assigned an impermissible value an error message ap pears instead of the source User edited The value has been changed in TROVIS VIEW From device The value has been uploaded from the device A refreshed value during online mode is indicated by a green x in the icon From file originally from device The value was originally uploaded from the device saved in a file and has now been reread into TROVIS VIEW from the file EB 6661 EN 47 Main window From file originally from device The value was originally changed in TROVIS V

Download Pdf Manuals

image

Related Search

Related Contents

Samsung DC60FTSA User Manual  USER MANUAL - True Audiophile    Pioneer DEX-P90RS User's Manual  User Manual v.3.04  Documentation - Manu Lorraine    Thermostatschränke Thermostatically controlled  5. W. A. T. LOCK - R  

Copyright © All rights reserved.
Failed to retrieve file