Operating Instructions - summary 82132 Code-Combi B 1
Contents
1. Operating Instructions summary 82132 Code Combi B 1 Working instructions These instructions serve to impart the first basic functions They do not replace the complete operating instructions If during the operation signals are shown which are not described in these instructions please consult the complete operating instructions Please keep the revision key at a safe place but not in the same safe If the numeric code is not available or the electronic function is not possible the key allows a purely mechanical opening If the lock is opened the key also makes an alteration of opening code primary code possible in case the opening code is not available anymore 2 Signals and what they mean Combined fitting with lever handle jp Plastic input unit Aluminium input unit Combined fitting with hinged handle bar handle green LED red LED combined green red LED hinged handle lever handle bar handle bar handle safe handle bar handle safe handle 7 Fig 1 Input units Signal Meaning Suge Signa LED flashes once Valid 6 digit code entered Green LED remains lit up Lock is ee for programming Red LED flashes 3 times Misentry Red LED flashes 10 times after ON button pressed Insufficient voltage of the battery Red LED flashes every second for 1 2 4 8 or 16 minutes after 3 or Lock is in blocked status minutes more incorrect code entries Red LED flashes every 5 seconds Lock is in time d2. 3 4 5 6 when supplied Alter this immediately to LAr handle must be used 4 Alteration of primary code programmed code should be tested at least twice with the safe opened Alteration of primary personal primary code ee rite the lock with the works code Open the lock with the personal see 3 or complete operating primary code see 3 or complete instructions 4 1 1 operating instructions 4 1 1 f The lock should only be programmed with the lock and safe opened The newly Press ON 2 3 PressP Press P 4L PressP oo S O Enter the works code 123456 Enter new 6 digit primary code Enter new 6 digit primary code Enter new 6 digit primary code O again again Test newly programmed primary Test newly programmed primary code by locking and opening once code by locking and opening once more more Revision level 02 05 2007 Page 2 3 Operating Instructions summary 82132 Code Combi B 5 Switching on of secondary code 1 Open lock with valid 6 digit primary code see 3 or complete operating hal instructions 4 1 1 a 2 PressON o 3 PressP o 5 6 Press 3 a ee 7 Enter new 6 digit secondary code 8 Enter new 6 digit secondary code again han Test newly programmed secondary code by locking and opening once more 6 Cancellation of secondary code 1 Open lock with valid 6 digit primary code see 3 or complete operating instructions 4 1 1 Press ON a 3 PressP o S O G
3. elay status Red and green PEt llase Lock was last opened with another code alternately 3 times Plastic control unit cover plate removed for key opening Red and green LED flash Aluminium control unit accompanied by an acoustic signal battery compartment lid was opened to change batteries or attempt to tamper with lock dismantling of the input unit Green LED flashes every 5 seconds accompanied by an Lock is in opening window status acoustic signal Revision level 02 05 2007 Page 1 3 Operating Instructions summary 82132 Code Combi B Acoustic signal sounds once E g end of opening window period Dy amp Acoustic signal sounds 2 times E g during programming new 6 digit code entered 3y E Acoustic signal sounds 3 times E g during programming invalid 6 digit code entered 3 Opening With works code 123456 With personal code ee Press ON Press ON kd Enter works code Enter personal primary or secondary a code Within 4 seconds turn bar handle Within 4 seconds turn bar handle clockwise until stop position is clockwise until stop position is reached reached your own personal code for security reasons Do not use any personal or other similarly well known data for example birthdays when selecting this code In conjunction with a bolt work after the lock has been opened the mechanic of the bolt work must be opened Therefore the corresponding fi The lock is set at the works code 1 2
4. eren valid edot primary code o a 5 Press P P PressP o O 8 Press 0 By pressing the key combination P and 0 all the functions programmed secondary code dual code time delay and opening window are deleted 7 Locking In conjunction with a bolt work after the door has been closed the bolt work must be blocked and the lock must be closed For further functions and important points please have a look at the complete operating instructions Revision level 02 05 2007 Page 3 3
Download Pdf Manuals
Related Search