Kawasaki 840068 Use and Care Manual
Contents
1. 19 OTHER CONSUMER DO IT YOURSELF DIY TOOLS 13 SECTION FIVE 14 17 1 CONGRATULATIONS Thanks for choosing this product At Alltrade our aim is to provide you with quality products at an affordable price and we want you to be totally satisfied with your product and our Customer Service If any help and advice is needed please contact us at 1 800 590 3723 Properly cared for this tool will give you many years of satisfaction INTENDED USE This tool is intended for consumer use only RECOGNIZE SAFETY SYMBOLS WORDS AND LABELS The safety instructions provided in this manual are not intended to cover all possible conditions and practices that may occur when operating maintaining and cleaning power tools Always use common sense and pay particular attention to all the DANGER WARNING CAUTION and NOTE statements of this manual This is the safety alert symbol It is used to alert you to potential personal injury hazards Obey all Safety messages that follow this symbol to avoid possible injury or death DANGER indicates an imminently hazardous Situation which if not avoided will result in death or serious injury WARNING indicates a potentially hazardous Situation which if not avoided could result in death or serious injury ICAUTION indicates a potentially hazardous Situation which if not avoided2. hands and feet well away from the work piece Never feed the blade into the work piece until the blade is at full speed If the blade is not at full speed the saw may kick back causing serious personal injury Do not force the saw Excessive force may result in a broken blade Use only enough pressure to keep the saw moving through the work piece e Put on eye eee protection a Clear the SaW of any i gt F foreign material Be 1 1 e Make sure the work piece is held oe securely in place Hold smaller pieces eT in a vise or attach to the workbench i with clamps 1 e Mark out the line to be cut so it is easily visible ae Pull the trigger to start the saw e Set the shoe against the work piece e When the blade reaches full speed slowly feed the blade into the work piece PLUNGE CUTTING WARNING Never feed the blade into the work piece until the blade is at full speed If the blade is not at full speed the saw may kick back Causing serious personal injury Do not force the saw Excessive force may result in a broken blade Use only enough pressure to keep the saw moving through the work piece 10 e Mark out the line to be cut SO it is easily visible e Start inside the area to be re ee e Depress the lock on button fff fA and press the trigger to start the saw ee Set the shoe against the work piece e When the bla
3. may result in minor or moderate injury CAUTION CAUTION used without the safety alert symbol indicates a potentially hazardous situation which if not avoided may result in property damage NOTE provides additional information that is useful for proper use and maintenance of this tool If a NOTE is indicated make sure it is fully understood IMPORTANT SAFEGUARDS ria People with electronic devices such as pacemakers should consult their physician s before using this product Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker Some dust created by grinding drilling sawing sanding and other construction activities contains chemicals known to the State of California to cause cancer birth defects or other reproductive harm Some examples of these chemicals are e Lead from lead based paints e Crystalline silica from bricks and cement and other masonry products and arsenic and chromium from chemically treated lumber Your risk from these exposures varies depending on how often you do this type of work To reduce your exposure to these chemicals work in a well ventilated area and work with approved safety equipment such as dust masks that are specially designed to filter out microscopic particles Handling the power cord on this product may expose you to lead a chemical known to the State of California to cause cancer and birth defects o
4. FOR CUSTOMER SERVICE POUR LE SERVICE APRES VENTE OU DU CONSOMMATEUR PARA EL SERVICIO PARA EL CONSUMIDOR 1 800 590 3723 Kawasaki Kawasaki Motors Corp USA OFFICIAL LICENSED PRODUCT Boo aoe KAWASAKI IS A TRADEMARK LICENSED BY KAWASAKI MOTORS CORP U S A WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT CONSUMER INQUIRES SHOULD BE DIRECTED TO COPYRIGHT 2005 ALLTRADE TOOLS LLC 1431 VIA PLATA LONG BEACH CA 90810 1462 USA 840068_Corded Reciprocating Saw MODEL MOD LE MODELO K ki 840068 awasaki INSTRUCTION MANUAL meng ra a mth iee 1 Peaks l ia s 1 at s oe is a 1 Poe vey Bae a Fi M arra tors Lol le r ee a wl TAE F H a a T F eea i aera ee aS wt ont oles ee THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY OPERATION MAINTENANCE AND STORAGE OF THIS PRODUCT BEFORE USE READ CAREFULLY AND UNDERSTAND ALL CAUTIONS WARNINGS INSTRUCTIONS AND PRODUCT LABELS FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY AND OR PROPERTY DAMAGE IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE PRODUCT DO NOT RETURN THIS PRODUCT TO THE STORE PLEASE CALL OUR CUSTOMER SERVICE DEPARTMENT AT 1 800 590 3723 BEFORE YOU CALL HAVE THE FOLLOWING INFORMATION AVAILABLE MODEL NO DATE PURCHASED AND STORE
5. LOCATION AN ALLTRADE REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE IF YOU WOULD LIKE TO MAKE A SUGGESTION OR COMMENT GIVE US A CALL OR EMAIL US AT INFO ALLTRADETOOLS COM YOUR FEEDBACK IS VITAL TO US TABLE OF CONTENTS CONGRATULATIONS 0 0 0 ee 2 INTENDED USE 0 cee 2 SECTION ONE RECOGNIZE SAFETY SYMBOLS WORDS AND LABELS 2 3 IMPORTANT SAFEGUARDS 3 SECTION TWO POWER TOOL 4 7 PERSONAL SAFETY ute 4 SAFETY RULES FOR RECIPROCATING SAW 9 ELECTRICAL SAFETY 6 WORK AREA we mati aterm eee make att ieee tae 6 TOOL USE AND CARE 2 0200 eee 6 7 SECTION THREE UV OCS 7 OPERATING INSTRUCTIONS 8 11 VARIABLE SPEED TRIGGER SWITCH 9 ATTACHING REMOVING 9 GENERAL CUTTING eee 10 PLUNGE CUTTING e4a aceeyetaeanenauncaueseuiesgice coon 10 11 METAL CUTTING ccc ee 11 SECTION FOUR ACCESSORIES sat yaungeees 1 ehaneuaenassucateye dapeees ossan 12 12 19
6. OMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS TOOL CURRENT RATING CONDUCTOR SIZE IN A W G AMPERE 1OFT 25FT 5O0FT 100 1 3 6 18 18 18 18 6 8 18 18 18 16 8 10 18 18 18 14 10 12 16 16 14 14 12 16 14 12 12 16 20 12 12 12 E MAINTENANCE AND CLEANING Always UNPLUG the Reciprocating Saw from the power source before inspecting performing any maintenance or cleaning This Reciprocating Saw is lubricated before it leaves the factory This lubrication should last for the life of the tool No further lubrication is required Use only mild soap and a damp cloth to clean the tool Never let any liquid get inside the casing Never immerse any part of the tool in a liquid Always keep the ventilation openings clear Brushes will wear with use and should be inspected periodically by qualified personnel Regularly clean the ventilation slots in your tool using only a soft brush or dry cloth Never open the Reciprocating Saw case Do not attempt to repair the Reciprocating Saw yourself Opening the case will void your warranty 12 SPECIFICATIONS SPECIFICATIONS Voltage 120V 60 Rated Current 5 0A Length of Stroke 18mm 3 4 No Load Speed 2900 min s CAUTION use only authorized replacement parts for your tool Tool service must be performed only by qualified repair personnel using authorized replacement parts Service or maintenance by unqualified personnel could result in considerable risk of pers
7. ORAL ARISES BY OPERATION OF LAW AND OR EQUITY AND OR BY ANY ACT OR OMISSION OF ALLTRADE AND OR ITS REPRESENTATIVE S OR THE PURCHASER INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE AND OR ITS REPRESENTATIVES PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS CLAIMS AND OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON PURCHASER S SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE Limitation Of Liability IN NO EVENT SHALL ALLTRADE AND OR ITS REPRESENTATIVE S BE LIABLE FOR INDIRECT INCIDENTAL SPECIAL AND OR CONSEQUENTIAL DAMAGES OF ANY KIND ARISING OUT OF OR RELATED TO DIRECTLY OR INDIRECTLY ANY BREACH OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND OR ITS REPRESENTATIVE S AND PURCHASER ANY WARRANTY HEREUNDER AND OR THE EXISTENCE DESIGN MANUFACTURE PURCHASE USE AND OR OPERATION OF ANY ITEM S SOLD HEREUNDER EVEN IF ALLTRADE AND OR ITS REPRESENTATIVE S HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH DAMAGES IN NO EVENT WHETHER AS A RESULT OF A BREACH OF CONTRACT WARRANTY TORT INCLUDING NEGLIGENCE OR OTHERWISE SHALL ALLTRADE S AND OR ITS REPRESENTATIVE S LIABILITY EXCEED THE PRICE OF THE PRODUCT ANY AND ALL LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIODS SPECIFIED ABOVE 16 Limitations o
8. ce to a stable platform Holding the work by hand or against your body Is unstable and may lead to loss of control Maintain tools with care Keep cutting tools sharp and clean Properly maintained tools with a sharp cutting edge are less likely to bind and are easier to control Do not use a damaged tool Tag damaged tools Do not use until repaired Do not force the tool Use the correct tool for your application The correct tool will do the job better and safer at the rate for which it is designed SYMBOLS IMPORTANT Some of the following symbols may be used on your tool Please Study them and learn their meaning Proper interpretation of these symbols will allow you to operate the tool better and safer SYMBOL NAME EXPLANATION Volts Voltage Potential A Amperes Current Hz Hertz Frequency Cycles per Second W Watt Power Kg Kilograms Weight Alternating Current Type of Current sae Direct Current Type of Current a Alternating or Direct Current Type of Current 5 Earthing Terminal Grounding Terminal Class Construction Denotes Double Insulation min Minutes Time S seconds Time p Diameter Size of Drill Bits Grinding Wheels etc na No load speed No load Rotational Speed min Revolutions per Minute Revolutions Surface Speed Strokes etc per Minute Ring Selector Settings Speed Torque or Position Settings OPERATING INSTRUCTIONS i ie rr 6 5 ee ty ig Fn ease
9. cord away from heat oil sharp edges or moving parts Replace damaged power cords immediately Damaged power cords increase the risk of electric shock WORK AREA CAUTION Make sure that the work area is appropriate and safe to prevent accidents Keep your work area clean and well lit Cluttered work benches and dark work areas may cause accidents or injury Do not operate power tools in explosive areas such as in the presence of flammable liquids gases or dust Power tools create sparks which may ignite the dust or fumes Keep bystanders children and visitors away while operating a power tool Distractions can cause you to lose control Protect others in the work area from debris such as chips and sparks Provide barriers or shields as needed Do not use this tool in a damp or wet environment TOOL USE AND CARE CAUTION Do not use the power tool if the power switch does not turn it ON or OFF Any tool that cannot be controlled with the power switch is dangerous and must be replaced Store idle tools out of reach of children and other untrained persons Tools are dangerous in the hands of untrained users Disconnect the power cord plug from the power source before making any adjustments changing accessories or storing the tool Such preventive safety measures reduce the risk of starting the tool accidentally Use clamps not included or other practical ways to secure and support the work pie
10. de reaches full speed slowly feed the blade into the work piece METAL CUTTING WARNING Never use gasoline or any flammable liquid as a lubricant Sparking from the motor may cause it to ignite into flames e When cutting metals other then copper brass or aluminum OB always use a lubricant such SOL Sa ae as cutting oil to keep the a mile D pa blade cool This i or will prolong the life of the eee a te blade as well i ify a up the cutting fs process e Make sure the work x piece is held bis Securely in place Hold smaller pieces such as pipe or conduit in a vise or attach to the workbench with clamps To eliminate vibration always cut close to the clamping point e When cutting thin sheets of metal place a piece of plywood on either side to control vibration and prevent tearing 11 ACCESSORIES Use only accessories that are recommended by the manufacturer for your model Accessories that may be suitable for one tool may become hazardous when used on another tool Always attach grounded 3 prong extension cords to grounded 3 hole outlets If you must use an extension cord be sure that the gauge is large enough to carry the amount of current necessary for your power tool not your tool may experience a loss of power excessive voltage drop or overheating The smaller the gauge number the heavier the cord see table below REC
11. ereof manufactured or distributed by Alltrade and does not apply to products and or components thereof designed manufactured and or assembled by others for which Alltrade makes no warranties whatsoever THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF Warranty Performance By purchasing the product purchaser expressly acknowledges and agrees that their sole and exclusive remedy under this warranty shall be strictly limited to the repair or replacement of any covered nonconforming items or parts thereof provided that any such nonconforming item and or part is promptly returned to Alltrade s facility postage pre paid and insured address ALLTRADE Warranty Claims amp Repair 1431 Via Plata Long Beach CA 90810 Attn Customer Service 310 522 9008 within the applicable warranty period with a written request by purchaser that Alltrade repair and or replace the nonconforming item and or part We recommend that you keep the original product packaging in the event you need to ship the unit We suggest the package be insured against loss or in transit damage When Sending your product include your name address phone number dated proof of purchase or copy and a statement about the nature of problem Warranty coverage is conditioned upon purchaser furnishing Alltrade with adequate written proof that they are the original purchaser and of the original purchase date Parts returned freight prepaid and insured to All
12. i r oe r E E E PENE eii Ft 4 ed CONTROLS AND COMPONENTS ACCESSORIES 1 Trigger Switch 5 Saw Blades 2 2 Lock On Button 6 Wrench 3 Blade Clamp 4 Shoe 9 VARIABLE SPEED TRIGGER SWITCH AND LOCK ON BUTTON 44 WARNING Never tape the trigger switch down to provide continuous high speed The tool may fail under such conditions causing fire or personal peme s a THIS TOOL IS CONTROLLED TRIGGER BY A TRIGGER SWITCH e The speed of the Reciprocating ieee Saw depends on the amount of 8 a pressure applied on the trigger SS The further the trigger is pressed a the faster the tool will go e To maintain a certain speed pull the On Off trigger to turn the Reciprocating Saw ON and engage the lock on button To turn the Reciprocating Saw OFF release the trigger switch The lock on button will automatically reset ATTACHING REMOVING BLADE TO ATTACH BLADE AE e Turn the blade ae ee clamp to the mik N elias Was TEL ha TRE 4 p right with fingers A e Insert blade then release at A the blade clamp to make A sure it is securely fastened a EEN ey e Make sure that the teeth are facing downward a TO REMOVE BLADE e Turn the blade clamp to the right with fingers Pull off blade GENERAL CUTTING WARNING Always hold the saw in front of you and away from your body Keep your
13. left attached to a rotating part of the power tool may result in personal injury Do not overreach Keep proper footing and balance at all times Proper footing and balance enables better control of the power tool in unexpected situations SAFETY RULES FOR RECIPROCATING SAW Always wear safety goggles or eye protection when using this tool Use a dust mask or respirator for applications which generate dust Secure the material being worked on Never hold it in your hand or across your legs Unstable support can cause loss of control and injury When using the Reciprocating Saw always maintain a firm grip on the tool with both hands Never put your hands or feet in the cutting area Do not grasp the tool or place your hands too close to the blade Keep your hands well away from the blade Never reach underneath the tool while the blade is in motion Do not use your legs or feet to stabilize the work piece Position yourself to avoid being caught between the tool or side handle and walls or posts Should the blade become bound or jammed in the work it could result in loss of control and injury Always hold the tool by its insulated gripping surfaces when cutting in areas that may contain hidden live wiring If the blade makes contact with a live wire the metal parts of this tool may conduct enough electricity to seriously shock the user Contact with a live wire will make exposed metal parts of the tool live and shock the operato
14. n Warranty Disclaimers some states do not allow limitations on how long an implied warranty lasts and some states do not allow the exclusion or limitation of the incidental or consequential damages so part or all of the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state If your product is not covered by this warranty please call our Customer Service Department at 1 310 522 9008 or toll free at 1 800 590 3723 for general repair information and charges 17 18
15. nsibility for loss of the unit loss of time or rental inconvenience commercial loss or consequential damages Exclusions This warranty does not cover parts damaged due to normal wear abnormal conditions misapplication misuse abuse accidents operation at other than recommended pressures or temperatures improper storage or freight damage Parts damaged or worn by operation in dusty environments are not warranted Failure to follow recommended operating and maintenance procedures also voids warranty This limited warranty does not apply to accessory items such as drill bits screwdriving bits circular saw blades jigsaw blades grinding wheels sanding Sheets and other related items DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING ACCIDENT ABUSE NEGLIGENCE FAILURE TO FOLLOW INSTRUCTIONS UNAUTHORIZED REPAIRS OR ALTERATIONS DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES COMMERCIAL AND RENTAL APPLICATIONS OR OTHER CAUSES UNRELATED TO PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS WARRANTY Alltrade will not be liable for the following labor charges loss or damage resulting from improper operation maintenance or repairs made by other persons pre delivery services such as assembly or lubricants and adjustment maintenance services that are normally required to maintain the product The use of other than genuine Alltrade Repair Parts will void warra
16. nty Warranty Disclaimers EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES GUARANTIES AND OR REPRESENTATIONS EXCEPT FOR THE LIMITED WARRANTY PROVIDED ABOVE ALL OTHER EXPRESS WARRANTIES GUARANTIES AND OR REPRESENTATIONS BY ALLTRADE AND OR ITS REPRESENTATIVE S REGARDING THE DESIGN MANUFACTURE PURCHASE USE AND OR OPERATION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER REGARDLESS OF 15 WHETHER ANY SUCH WARRANTY GUARANTY AND OR REPRESENTATION WRITTEN OR ORAL ARISES BY OPERATION OF LAW AND OR EQUITY AND OR BY ANY ACT OR OMISSION OF ALLTRADE AND OR ITS REPRESENTATIVE S OR THE BUYER ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE AND OR ITS REPRESENTATIVES PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS CLAIMS AND OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON PURCHASER S SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE NO WARRANTY ORAL OR WRITTEN OTHER THAN THE ABOVE WARRANTY IS MADE WITH REGARD TO THIS PRODUCT ALL EXPRESS AND OR IMPLIED WARRANTIES GUARANTIES AND OR REPRESENTATIONS BY ALLTRADE AND OR ITS REPRESENTATIVE S REGARDING THE DESIGN MANUFACTURE PURCHASE USE AND OR OPERATION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER REGARDLESS OF WHETHER ANY SUCH WARRANTY GUARANTY AND OR REPRESENTATION WRITTEN OR
17. onal injury Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury OTHER CONSUMER DO IT YOURSELF DIY TOOLS Alltrade offers a full range of Kawasaki tools that make DIY jobs easy If you would like further information on the following products please contact Alltrade Customer service Department at 1 800 590 3723 Cordless Drills Screwdrivers Impact Wrenches sanders Jigsaws Circular Saws Angle Grinders Reciprocating Saws Routers Rotary Tools Corded and Cordless Multi Purpose Tools Wide Range of Accessories and more 2 YEAR LIMITED WARRANTY Express and Exclusive Limited Warranty to Original Retail Buyer Alltrade Tools LLC hereinafter Alltrade expressly warrants to the original retail purchaser of the accompanying KAWASAKI portable power tool and no one else all parts of the product except those parts referred to below which are specifically excluded from such warranty see Exclusions to be free from defects in materials and workmanship for a period of two years from original date of purchase The date of purchase shall be the date of shipment to the original purchaser or the date the original purchaser took possession custody or control of the product whichever occurred first This warranty shall be null and void if the product or any component thereof is modified or altered This warranty does not apply to any other product and or component th
18. r Do not cut or break into existing walls or other blind areas where electrical wiring may exist If this situation is unavoidable disconnect all fuses or circuit breakers feeding this worksite Check to see that keys and adjusting wrenches are removed from the saw before switching the tool ON Keys or wrenches can fly away at high velocity striking you or a bystander Do not run the Reciprocating Saw while carrying it at your side A moving blade could cause serious personal injury Do not use the Reciprocating Saw if it has been damaged left outdoors in the rain snow wet or damp environments or immersed in liquid Do not use dull or damaged blades Keep cutting tools sharp and clean Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control When restarting a saw in the workpiece check that teeth are not engaged in the material Keep the handle of the Reciprocating Saw dry clean and free from oil and grease Be extra careful when cutting in high or hard to reach locations Be on the lookout for hidden wires and falling debris Maintain labels and nameplates on the Reciprocating Saw These carry important information If unreadable or missing contact Alltrade for a replacement 9 ELECTRICAL SAFETY CAUTION Do not abuse the power cord or use a damaged power cord Never use the power cord to carry the tools or pull the plug from an outlet Keep the power
19. r other reproductive harm Wash hands after handling SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE POWER TOOL SAFETY AND USE PERSONAL SAFETY WARNING Stay alert Watch what you are doing and use common sense when operating a power tool Do not use a power tool while tired or under the influence of drugs alcohol or medication A moment of inattention while operating power tools may result in serious personal injury Before use check for damaged or defective parts Do not use the tool if any part is damaged or defective Carefully check the tool for damage Check for breakage of parts damage to guards switches misalignment and seizure of moving parts or any other conditions that may affect the tool s operation Ensure that the tool will operate properly and perform its intended function Have any damaged or defective parts repaired or replaced by an authorized repair agent Never attempt to do any repairs yourself Do not use the tool if the switch does not turn it ON or OFF Use safety equipment Always wear eye protection Dust mask non skid safety shoes hard hat or hearing protection must be used for appropriate conditions Dress properly Do not wear loose clothing or jewelry Keep long hair clothing and gloves away from moving parts Loose clothes jewelry or long hair can be caught in moving parts Remove adjusting keys or wrenches before turning the power tool ON A wrench or a key that is
20. trade s facility 588 above address will be inspected and at Alltrade s option repaired and or replaced free of charge if found to be defective and subject to warranty Alltrade retains the sole discretion to determine whether any item or part is nonconforming and if so whether the item and or part will be repaired and or replaced If the unit is repaired new or reconditioned replacement parts may be used If Alltrade chooses to replace the product it may replace it with a new or reconditioned one of the same or comparable design The repaired or replaced unit will be warranted under the terms of the remainder of the two year warranty period Typically a defective product that 14 is returned within the first 30 days after the purchase date will be replaced for items returned after the first 30 days and within the two year warranty period covered defective parts not subject to normal wear and tear or other exclusions will be repaired or replaced at Alltrade s option During the warranty period Alltrade will be responsible for the return shipping charges Alltrade s repair and or replacement of any nonconforming item and or part thereof shall constitute fulfillment of all obligations to the purchaser Alltrade shall not be responsible or liable for any expense including freight charges or repairs made outside Alltrade s facility unless expressly agreed to by Alltrade in writing Under no circumstances shall Alltrade bear any respo
Download Pdf Manuals
Related Search