Toledo Fine Locks V190TBIUS15 Instructions / Assembly
Contents
1. 4 Reversible Levers a Please check the levers are unlocked Entrance sets only Depressing lever catch with hand tool to release outside lever and pulling lever off Taking apart off the spacer and cylinder from outside lever b Afterwards taking apart off the spacers from inside lever with the above procedures Reversing the levers from outside to inside inside to out side putting the cylinder on the outside lever Entrance sets only and setting the spacer back Please do the same procedures for inside lever c Pushing handles in until catch clicks Make sure levers are retained by lever Handle can be only installed when the timing a Close door to make horizontal of emergency release centre line of strike is set in the position shown below FAN Insert spindle through latch LEFT RIGHT Press flush against door HAND DOOR HAND DOOR Measure one half of door thickness from door stop and mark vertical centre line of strike Drill 1 25 4mm hole 1 2 13mm deep at intersection of horizontal and vertical line of strike Match screw holes on strike with centre lines on jamb Mark outline and chisel 1 16 1 6mm deep for strike c Install strike and tighten screws Install inside lever and tighten screws until lock is firm FOR BACKSET 70mm 2 3 4 TEMPLATE 54mm 2 1 8 FOR BACKSET 60mm 2 3 8 Fold on dotted line and fit on door edge Fald on dotted line and fit on door edge2. AN 5 5mm 7 32 x 2 1 3 4 1 9 16 1 3 8 hole for metal door only Make 1 25 4mm hole at center of door edge
Download Pdf Manuals
Related Search