Home Decorators Collection 85804Y Instructions / Assembly
Contents
1. E XXX XXX 85798Y 23DE9448 NB04 XXX XXX 85521Y 23DE9448 NCO1 XXX XXX 85804Y 23DE9448 NE01 DECORATORS XXX XXX 85811Y 23DE9448 PT85 PON USE AND CARE GUIDE CHARLES MILL ELECTRIC FIREPLACE Questions problems missing parts Before returning to the store call Home Decorators Collection Customer Service 8 a m 7 p m EST Monday Friday 9 a m 6 p m EST Saturday 1 800 986 3460 HOMEDEPOT COM HOMEDECORATORS THANK YOU We appreciate the trust and confidence you have placed in Home Decorators through the purchase of this electric fireplace We strive to continually create quality products designed to enhance your home Visit us online to see our full line of products available for your home imporvement needs Thank you for choosing Home Decorators Table of Contents Maximum Load Warning Safety Information Warranty E Pre Assemibly iei ierat enean anaia ananasen Hardware Included enano nn nnn e Product Specifications TOIS ROQUINCO uicit reote roche Package Contents rrt 7 8 OperatiOn nien e erri nieto un 16 FCC IC 18 Care amp Cleaning cene eicit hne 18 TroubleShoot2. 1 2 Preparing the partitions Attach 2 Hole Plastic Connector Blocks AA to the Left Attach the Small Plastic Connector Blocks Il to the Right Partition E using Short Flathead Screws CC Repeat this process for the Left Partition C Attaching the front panels Insert Wood Dowels MM into pre drilled holes on the Left Partition C and the Right Partition E Attach the Left Front Panel B to the Left Partition C using Short Flathead Screws CC Repeat this process for the Right Front Panel D and the Right Partition E Assembly continued 4 Preparing the middle front panel 5 Attaching the middle front panel Screw the Bolts DD through the 2 Hole Plastic Insert the Wood Dowels MM into the pre drilled holes Connector Blocks AA into the Middle Front Panel F on the ends of the Middle Front Panel F and tighten Connect the Left Front Panel B to the Middle Front Panel F with the Long Washerhead Screws JJ Repeat for the Right Front Panel D 6 Preparing the center shelf Screw Bolts DD through 2 Hole Plastic Connector Blocks AA onto the edge of the Center Shelf J HOMEDEPOT COM HOMEDECORATORS 9 Please contact 1 800 986 3460 for further assistance Assembly continued
3. NOTE SAVE THESE INSTRUCTIONS Warranty 1 Year Limited Warranty The manufacturer warrants that your new Electric Fireplace is free from manufacturing and material defects for a period of one year from date of puchase subject to the following conditions and limitations 1 10 Install and operate this appliance in accordance with the installation and operating instructions furnished with the product at all times Any unauthorized repair alteration willful abuse accident or misuse of the product shall nullify this warranty This warranty is non transferable and is made to the original owner provided that the purchase was made through an authorized supplier of the product The warranty is limited to the repair or replacement of part s found to be defective in material or workmanship provided that such part s have been subjected to normal conditions of use and service after said defect is confirmed by the manufacturer s inspection The manufacturer may at its discretion fully discharge all obligations with respect to this warranty by refunding the wholesale price of the defective part s Any installation labor construction transportation or other related costs expenses arising from defective part s repair replacement or otherwise of same will not be covered by this warranty nor shall the manufacturer assume responsibility for same The owner user assumes all other risks if any including the risk of
4. T Attaching the center shelf Screw the Bolts DD through the 2 Hole Plastic Connector Blocks AA into the Center Shelf J to secure en LE Preparing the side panels Screw the Bolts DD through the 2 Hole Plastic Connector Blocks AA onto the edge of the Left Side Panel H Repeat for the Right Side Panel I Attaching the mounting plates Attach the Hinge Mounting Plate L 1 to the Left Side NN Panel H using the Short Washerhead Screws NN Repeat for the Right Side Panel I Assembly continued 1 0 Attaching the side panels 1 1 Attaching the base assembly Attach the Left Side Panel H and the Right Side Panel Insert the Wood Dowels MM into the pre drilled holes 1 to the assembly from the step 7 on the completed assembly from Step 10 Secure using the Bolts DD through the 2 Hole Plastic Using the Long Flathead Screw GG attach the Base Connector Blocks AA Assembly A to the bottom of the completed assembly from Step 10 AA 1 2 Preparing the divider Attach a 3 Hole Plastic Connector BB to the Divider K using Bolts DD HOMEDEPOT COM HOMEDECORATORS 11 Please contact 1 800 986 3460 for further assistance Assembly continued 1 3 Attaching the divider 1 4 Attaching t
5. left unused for a long time measured pace Press the remote control buttons with an even motion and gentle pressure Repeatedly pressing Power cord information This heater is for use 120 volts The cord has a plug as shown in the figure Connect to properly grounded outlets only Do not use a 2 prong adapter Never use with an extension cord or relocatable power tap outlet power strip 6 Disposing of used batteries The battery may contain hazardous substances that could endanger the enviroment and human health This symbol marked on the battery and or packaging indicates that used battery shall not be treated as municipal waste Instead it shall be left at the appropriate collection point for recycling By correctly disposing used batteries you prevent potential negative consequences for the environment and human health Recycling used materials also conserves natural resources For more information about collecting and recycling used batteries please contact your local municipality your waste disposal service or the point of sale where you purchased this product HOMEDEPOT COM HOMEDECORATORS Please contact 1 800 986 3460 for further assistance FCC IC Information WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void user s autho
6. not working The remote is too far from the heater With the power on press and hold the POWER button on the control panel for 10 seconds Once re enabled the emberbed lights will flash multiple times Change the remote batteries Operate remote transmitter at a slow meas ured pace Press the remote control buttons with an even motion and gentle pressure Repeat edly pressing buttons in rapid succession may cause the transmitter to malfunction Operate the remote at a distance less than 20 ft from the front of the appliance point the remote at the control panel 20 Replacement Parts For replacement parts call our customer service department at 1 800 986 3460 8 a m 7 p m EST Monday Friday 9 a m 6 p m EST Saturday Pat Wy 1 Flame GeneratorDrve Motor 2 3 WwmomiBbad 1 4 mms 5 HeaterBlowerAssemby 1 6 ummPmeOmiBed 1 b Control Panel Buttons Fd 8 Emberbed with Log 9 Emberbed Circuit Board o oermens wo pmo o Jm lm m au 2 10 Wi ll A m LL N O DEED Te 1 0 j df b B SH mE 8 9 13 HOMEDEPOT COM HOMEDECORATORS 21 Please contact 1 800 986 3460 for further assistance DECORATORS COLLECTION Questions problems missing parts Before returning to the store
7. the back edge of the Top Assembly G Move the completed assembly from step 23 into place at the back of the mantel Tighten Bolts DD through the Plastic Connectors HOMEDEPOT COM HOMEDECORATORS 15 Please contact 1 800 986 3460 for further assistance Operation NOTE The control panel can be accessed at the upper right corner of the insert m When a function is changed from the control panel or remote control there will be a corresponding indicator see Figure 1 on the upper right of the projection screen The indicator shows the function changed and the level selected by the control panel or remote control When the function is turned off the corresponding indicator will flash several times and then fade off Powering the fireplace 2 Adjusting the flame Push the Power button to supply power to all functions of the fireplace and put the insert in a standby mode Push the Power button again to turn off all functions There are 6 brightness levels that can be selected Settings F6 F4 decrease in Amber brightness Settings F3 F1 decrease in Spectrafire brightness NOTE All previous settings are held in memory so the next time you power up the fireplace the unit will turn on with the same settings NOTE Holding the Power button on the control panel for 3 seconds will disable the heater function 3 Adjust
8. ING Do not use this fireplace if any part of it has been under water Immediately call a qualified service technician to inspect the fireplace and replace any part of the electrical system N WARNING Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire electrical shock or personal injury Troubleshooting PROBLEM ROOT CAUSE CORRECTIVE ACTION Unplug the fireplace remove the back panel of the fireplace and check that the thermo nE n The thermostat sensor is stat is plugged into the main circuit board Display shows broken or disconnected If this does not solve the problem contact customer service for a replacement thermo stat sensor ur 2u Contact customer service for a replacement Display shows E 2 The thermostat sensor is broken thermostat sensor Inspect the heater and check that the air inlets and outlets are not blocked as this may cause overheating Unplug the heater for 30 Manual Reset overheat minutes and allow it to cool down Replug protection has triggered and operate Monitor the heater for signs of overheating If the problem persist discon tinue use of the heater and contact customer service Check your heater cord and plug connections Faulty wall outlet connections or loose plugs can cause the outlet or plug to overheat Be sure the plug fits tight in the outlet Heaters draw more current than small appliances Overheating of the outlet may occur even
9. Long Washerhead Screw PH SCRBLKO01 Shelf Pin PH SPNPCSPLB2 N A Wood Dowel PH DWLNTLOO1 Short Washerhead Screw N A Touch up Pen N A A NOTE Hardware not shown to actual size PRODUCT SPECIFICATIONS VOLTAGE 120VAC 60 Hz AMPS 12 5 Amps WATIS sowas PLANNING ASSEMBLY Before beginning assembly of product make sure all parts are present Compare parts with Hardware Included and Package Contents lists If any part is missing or damaged do not attempt to assemble install or operate the product Contact customer service for replacement parts Estimated Assembly Time 60 Minutes TOOLS REQUIRED ee Phillips Screwdriver Pre Assembly continued PACKAGE CONTENTS NOTE All panels are labeled left and right as viewed from the front of unit eU i iy u EN x Le V j 4 J te Description Base Assembly Left Front Panel Left Partition Right Front Panel Right Partition Middle Front Panel Top Assembly Left Side Panel Right Side Panel Center Shelf pper Back Panel ide Back Panel eft Door ight Door djustable Shelf ecuring Block orner Extension orner Brace ireplace Insert c mn HOMEDEPOT COM HOMEDECORATORS 7 Please contact 1 800 986 3460 for further assistance Assembly 4 Preparing the partitions Partition C using Bolts DD G Repeatthis process for the Right Partition E
10. any direct indirect or consequential loss or damage arising out of the use or inability to use the product except as provided by law All other warranties expressed or implied with respect to the product its components and accessories or any obligations liabilities on the part of the manufacturer are hereby expressly excluded The manufacturer neither assumes nor authorizes any third party to assume on its behalf any other liabilities with respect to the sale of the product The warranties as outlined within this document do not apply to non accessories used in conjunction with the installation of this product This warranty gives you specific legal rights and you may also have other rights which vary from state to state This warranty is void if a The fireplace is subjected to prolonged periods of dampness or condensation b Any unauthorized alteration willful abuse accident or misuse of the product C You do not have the original receipt of purchase HOMEDEPOT COM HOMEDECORATORS 5 Please contact 1 800 986 3460 for further assistance Pre Assembly HARDWARE INCLUDED Part Number 2 Hole Plastic Connector Block PH PCBBLKOO1 3 Hole Plastic Connector Block PH PCBBLK002 Short Flathead Screw N A Bolt PH BLTBLK002 PH GLDBRW001 Description Floor Glide Pre attached Knob with Screw N A Long Flathead Screw N A Metal Plate Pre attached PH PLBLKO0O1 Small Plastic Connector Block N A
11. cal shock that parts of the heater are getting excessively hot If the and injury to persons including the following alarm flashes immediately turn the heater off and inspect for any objects on or adjacent to the heater that may cause high z 3 temperatures 1 Read all instructions before using this appliance DO NOT OPERATE THE HEATER WITH THE ALARM FLASHING 2 If possible always unplug this appliance when not in use 3 Only a qualified service person should repair this product WARNING This appliance is not a toy Supervise childre 4 Donotuse outdoors playing 5 Do not cover the cord under the carpeting Do not cover with throw rugs runners or the like Arrange the cord away WARNING Use extreme caution when operating heater from traffic areas and where it will not be tripped over near children and the disabled 6 disconnect this appliance turn the controls to the off position and then remove the plug from the outlet 7 Connect to properly grounded outlets only 8 This appliance when installed must be electrically grounded in accordance with local codes or in the absence of local codes with the current CSA C22 1 Canadian Electrical Code For U S A installations follow local codes and the National Electrical Code ANSI NFPA NO 70 WARNING To prevent a possible fire do not block air intakes 9 This appliance has hot and arcing or sparking parts inside or exhaust in any manner Do not use on soft surface
12. call Home Decorators Customer Service 8 a m 7 p m EST Monday Friday 9 a m 6 p m EST Saturday 1 800 986 3460 HOMEDEPOT COM HOMEDECORATORS RETAIN THIS MANUAL FOR FUTURE USE
13. ce Assembly continued 19 Installing the adjustable shelves Choose desired height of the Adjustable Shelf P and place the four Shelf Pins KK in the corresponding holes Insert the Adjustable Shelf P on top of the Shelf Pins KK 20 Installing the fireplace insert into the mantel assembly Lift the Fireplace Insert T carefully into the back of the unit and center in the fireplace insert opening Do not drag the fireplace insert across the Base Assembly A as it may scratch your unit 21 Attaching the securing block Attach the Securing Block Q by inserting Bolts DD through the 3 Hole Connector BB and into the threaded holes of the Base Assembly A Assembly continued 22 Preparing the corner extension 23 Assembling the corner extension Place the Corner Extension R face down on a scratch Attach the Corner Brace 5 to the Corner Extension free surface by inserting Bolts DD through the holes in the 2 Hole Attach 2 Plastic Connector Blocks AA to the Corner Plastic Connector Block AA and tighten Brace S using Bolts DD Repeat process for the Corner Externsion R DD AA S S 24 Attaching the corner extension Insert Wood Dowels MM into the holes in
14. he top assembly Insert Wood Dowels MM into the pre drilled holes in Attach the Top Assembly G to the completed assembly the Divider K from Step 13 Secure the Divider K to the Center Shelf J with the Secure using the Bolts DD through the Large Flathead Screw GG 2 Hole Plastic Connector Blocks AA S DD 1 5 Attaching the back panels Attach the Upper Back Panel L to the completed assembly from Step 14 using the Long Washerhead Screws JJ Repeat for the Side Back Panels M Assembly continued 1 6 Preparing the doors Attach the Hinges 1 2 to the Right Door 0 using the Short Washerhead Screws NN Repeat for the Left Door N 1 7 Attaching the knobs Door 0 with the screws FF Remove the preassembled screws from the Knobs FF then attach the Knob FF to the Left Door N and Right Her T i 0 1 8 Installing the doors Attach the Left Door N and the Right Door 0 by sliding the Hinges L 2 onto the Hinge Brackets L 1 Tighten the preassembled screw on the Hinge Bracket L 1 to secure each door in place Hinges are fully adjustable as shown HOMEDEPOT COM HOMEDECORATORS 13 Please contact 1 800 986 3460 for further assistan
15. ian ICES 003 Care and Cleaning Dust your fireplace regularly with a soft non lint producing cloth or household dusting product Clean your fireplace with a gentle non abrasive household cleaner Dry your fireplace immediately with a soft cloth or towel Tips for using touch up pen ZZ For scratches stroke in direction of scratch For worn areas stroke in direction of wood grain Rub excess colorant promptly with a soft cloth The motors used on the fan and the flame generator assembly are pre lubricated for extended bearing life and require no further lubrication However we recommend periodic cleaning vacuuming of the fan heater Make sure the unit is turned OFF and unplugged whenever you are cleaning the heater or fireplace WARNING Make sure the power is turned off before proceeding with repairs Any electrical repairs or rewiring of this unit should be N carried out by a licensed electrician in accordance with national and local codes If repairing or replacing any electrical component or wiring the original wire routing color coding and securing locations must be followed During any service of this appliance the power to the unit must be turned off First turn the main power switch to the OFF position Then remove the electrical plug from the wall outlet WARNING Electrical outlet wiring must comply with local building codes and other applicable regulations to reduce the risk of fire electrical shock and injury to persons WARN
16. if it has not occurred with the use of other appliances During use check frequently to determine if your plug outlet or faceplate is HOT If so discontinue use of the heater and have a qualified electrician check and or replace the faulty outlet s Normal operation will continue to run for several minutes before shutting down Times will vary based on tempertures During this time cool air will blow Check that the unit is plugged into a standard 120V outlet Press the Power button several times and make sure power is set to the ON position Display shows 3 Display shows E This is normal operation Heater does not blow warm air The heater is in a cool down cycle There is no power and the logs do not glow There is no power to the unit The logs glow but no flame effect The flame effect turned off Press the flame button several times Thermostat setting is Adjust the temperature settings to ensure The heater does not blow warm air preventing the heater from that the thermostat is set higher than the turning on current room temperature HOMEDEPOT COM HOMEDECORATORS 19 Please contact 1 800 986 3460 for further assistance Troubleshooting continued PROBLEM ROOT CAUSE CORRECTIVE ACTION Flame effect works but heater func tion does not and the emberbed flashes when the heater button is pressed The heater is disabled There are no batteries The signal is poor The remote control is
17. ing 19 Replacement Parts 21 Maximum Load Warning MAXIMUM LOAD 65 Ib 29 48 kg M E MAXIMUM LOAD 10 Ib 4 54 kg MAXIMUM LOAD 15 Ib 6 80 kg 14 CAUTION This unit is intended for use only with the products and maximum weights indicated Use with other products or products heavier y than the maximum weights indicated may result in instability causing possible injury m NOTE Flat Panel TVs with base support should be placed squarely in the center of the stand with no overhang on any side Safety Information Please read and understand this entire manual before attempting to assemble operate or install the product If you have any question regarding the product please call customer service at service at 1 800 986 3460 8 a m 7 p m EST Monday Friday 9 a m 6 p m EST Saturday WARNING This appliance is hot when in use To avoid burns do not touch hot surfaces with bare skin If provided A use handles when moving this appliance Keep combustible materials such as furniture pillows bedding papers clothes and curtains at least 3 ft 0 9 m from the front of this appliance When using electrical appliances basic precautions should WARNING This heater may include a visual alarm to warn always be followed to reduce the risk of fire electri
18. ing the heater Press the Heater button to set the thermostat The fireplace contains three infrared quartz heating elements The thermostat setting range is 62 F 82 F or 17 C 27 C or always ON The thermostat is adjustable by 2 F or 1 C increments The up and down buttons lt P on the remote will increase decrase temperature setting 4 Setting the timer Pressing the Timer button will cycle through the timer settings 30 minutes 1 Hour 2H 3H 4H 5H 6H 7H 8H 9H and off m NOTE To change between F and C press and hold the HEATER button on the control panel for 3 seconds Operation continued 5 Replacing the remote control battery When the remote control stops operating or its range seems reduced it is time to replace the battery with new ones On the back end of the remote press and slide the battery door open and remove the old battery Insert 2 AAA batteries checking that the and sides of the battery match inside the battery compartment Replace the battery compartment door NOTE Do not mix old and new batteries Do not mix alkaline standard carbonzinc or rechargeable nicad nimh etc batteries Do not ingest batteries NOTE Please operate the remote control at a slow buttons in rapid succession may cause the transmitter to malfunction NOTE Batteries should be removed if the product is to be
19. r operating unattended Extreme caution is necessary if unsupervised children or invalids b WARNING In order to avoid overheating do not cover the are nearby heater WARNING If the supply cord is damaged it must be replaced by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard A CAUTION Before assembly carefully use scissors or a utility A knife to cut and unwrap all parts Make sure you do not discard the hardware WARNING Under no circumstances should this fireplace be modified Parts that must be removed for servicing must be re placed prior to operating this fireplace again HOMEDEPOT COM HOMEDECORATORS 3 Please contact 1 800 986 3460 for further assistance Safety Information continued NOTE Use care in assembling your new fireplace Take your time and use the hardware provided and a quality Phillips head screwdriver Never overtighten bolts Do not sit on any part of the mantel NOTE To avoid injury from unexpected starting or electrical shock do not plug the power cord into a source of power during unpacking and assembly The cord must remain unplugged whenever you are adjusting assembling the fireplace If any part is missing or damaged do not attempt to use or plug in the power cord until the missing or damaged part is correctly replaced To avoid electric shock use only identical replacement parts when servicing double insulated tools
20. rity to operate the equipment NOTE This equipment has been tested and found to comply with the limits for Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and nm used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This Class B digital apparatus complies with Canad
21. s like a bed Do not use it in areas where gasoline paint or flammable wie die ranno Cs liquids are used or stored This fireplace should not be used as a drying rack for clothing Do not hang Christmas WARNING Use this appliance only as described in the manual stockings or other decorations on or near this product Any other use not recommended by the manufacturer may cause 10 There is a thermostat limiter inside the heater When inner Mre electe SOCK OF Lotus temperature overheating or abnormal heating occurs the thermostat protective device will cut off the power supply WARNING This appliance has hot and arcing or sparking parts to avoid damage to the fireplace or risk of fire inside Do not use it in areas where gasoline paint or flammable liquids are used or stored This fireplace should not be used as a drying rack for clothing Do not hang Christmas stockings or other decorations on or near this product WARNING This heater is not intended for use in bathrooms A laundry areas and similar indoor locations Never locate this appliance where it may fall into a bathtub or other water container WARNING Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire or damage the appliance DANGER High temperatures may be generated under certain abnormal conditions Do not partially or fully cover or obstruct the front of this heater CAUTION Never leave the heate
Download Pdf Manuals
Related Search