Martha Stewart TG90P3943D00 Instructions / Assembly
Contents
1. CONTROLLER AND REMOTE CONTROL Press the selector button on the Dual Color Light Control ler or Remote Controller to select among 1 CLEAR AND MULTI COLOR ALTERNATING 2 CLEAR LIGHTS 3 MULTI LIGHTS and 4 TURN OFF BOTH LIGHTS For the remote controller replace only A with CR2032 battery See bottom of the remote controller for Arce replacement instruction Remote Controller Tight Controller Christmas Tree Model TG90P3943D00 Sku 0000 000 000 CAUTION Use only power adaptor that was provided with this product Using a different power adaptor will damage the lights and cause fire electrical shock hazard Troubleshooting Problem Solution Ensure that all tree sections are plugged into each other and that the tree is plugged into the wall If your tree came with a foot pedal step on the On Off button The tree does not light Check for blown fuses at the light string and power cord plugs Replace as needed with the replacement fuses provided Check for loose broken or missing bulbs and replace as needed with the replacement bulbs provided2. MARTHA a 4 Safety Information IMPORTANT SAFETY INSTRUCTIONS When using electrical products basic precautions should always be followed including the following aREAD AND FOLLOW ALL SAFETY INSTRUCTIONS b Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use When products are used in outdoor applications connect the product to a Ground Fault Circuit Interrupting GFCI outlet If one is not provided contact a qualified electrician for proper installa tion c This seasonal product is not intended for permanent installation or use d Do not mount or place the product near gas or electric heaters fireplaces candles or other similar sources of heat e Do not secure the wiring of the product with staples or nails or place on sharp hooks or nails f Do not let lamps rest on the supply cord or on any wire g Unplug the product when leaving the house when retiring for the night or if left unattended h This is an electric product and not a toy To avoid risk of fire burns personal injury and electric shock it should not be played with or placed where small children can reach it i Do not use this product for other than its intended use j Do not hang ornaments or other objects from cord wire or light string k Do not close doors or windows on the product or exten sions cords as this may damage the wire insulation Do not cover the product with cloth paper or any materia
3. ide the locking disk of the tree stand E down until it snaps into place FR ZX Assembling the tree This tree assmebles with Quick Set technology Set up and light up your tree in less than 10 minutes Step 1 Remove the protective caps from the tree bottom D and insert the pole into the tree stand E Step 2 Continue by inserting the upper tree section s to the lower section s until inserting the tree top Step 3 Shape the branches to your preference by working from the bottom to the top When adjusting branches ensure that all wires are free of branch hinges Step 4 Insert the green label extension cord plug into the wall outlet All your lights should now be lit Step 5 When finished shaping the branches slightly upsweep all branch tips for a uniform look Do Not Tamper Internal Parts Do Not Tamper Section 3 Internal Parts Section 2 Do Not Tamper Internal Parts Section 1 Adaptor To Be Plugged Into Wall Outlet a Og F ontrol box 4 Foot Pedal on off Switch Operation Turning on the tree NOTE If some bulbs do not light or flicker search for any loose plugs and or broken loose or missing bulbs Replace bulbs promptly with the replacement bulbs provided in order to maintain the performance and life expectancy of your tree Step 1 Connect the light strings of the tree together and plug the power cord into a wall outlet Step 2 If the tree comes with a foot
4. l that is not a part of the product when in use m This product has a polarized plug one blade is wider than the other as a feature to reduce the risk of electric shock This plug will fit in a polarized outlet only one way If the plug does not fit fully in the outlet reverse the plug If it still does not fit contact a qualified electrician Do not use with an extension cord unless plug can be fully inserted Do not alter or replace the plug n This product is equipped with push in type lamps Do not twist lamps o This product employs overload protection fuse A blown fuse indicates an overload or short circuit situation If the fuse blows unplug the product from the outlet Also unplug any additional strings or products that may be attached to the product Replace the fuse as per the user servicing instructions follow product marking for proper fuse rating and check the product p Read and follow all instructions that are on the product or provide with the product a SAVE THESE INSTRUCTIONS Christmas Tree Model TG90P3943D00 Sku 0000 000 000 Pre Assembly Package Contents Part Description Quantity A Tree top tag 4 1 B Tree center 1 tag 3 1 C Tree center 2 tag 2 1 D Tree bottom tag 1 1 E Tree stand 1 Assembly Assembling the tree stand Step 1 Choose a location near a wall outlet Step 2 Unfold the legs of the tree stand E and lay the stand on the floor Step 3 Sl
5. pedal step on the On Off button Maintenance Spare parts This tree package includes hinge pins washers and bulbs for any replacement or repair that you need to perform on your tree If extra parts are needed contact the Customer Service Team at 1 877 527 0313 between the hours of 8 am and 5 pm EST Monday through Friday Repairing Loose Hinges Step 1 Place the branch into the slot of the bracket Step 2 Insert a new hinge pin through the holes of the bracket and secure with a washer Use and Care Instructions 1 Before using or reusing inspect product carefully Discard any products that have cut damaged or frayed wire insulation or cords cracks in the lampholders or enclo sures loose connections or exposed copper wire 2 Before disassembling the tree unplug the tree and remove all ornaments and decorations 3 Gently lift the tree top straight up to remove from the center section and fold all branches towards the pole 4 Repeat this step for the center and bottom tree sections 5 When storing the product carefully remove the product from wherever it is placed including tree branches or bushes to avoid any undue strain or stress on the product conductors connections and wires Cover the protective cap on the poles to avoid damaging the internal parts 6 When not in use store neatly in a cool dry location protected from sunlight User servicing instructions HOW TO USE THE DUAL COLOR LIGHT
Download Pdf Manuals
Related Search