Home Decorators Collection 1928100310 Instructions / Assembly
Contents
1. SURFACE OF THE PART HOW TO USE THE CAM TOOL NOTE e THE ARROWS ON THE HIDDEN CAM LOCKS SHOULD POINT TO THE CAM BOLTS 479 e INSTALL THE WOOD DOWEL a AND THE CAM LOCK BOLT b INTO THE LEFT SIDE PANEL B AND THE RIGHT SIDE PANEL C e JOIN THE LEFT SIDE PANEL B AND THE RIGHT SIDE PANEL C TO THE FRONT CROSS BAR D THE BOTTOM PANEL E AND THE BACK CROSS BAR G BY USING THE WOOD DOWEL a FIRST e TIGHTEN THE CAM LOCK BOLT b BY USING THE CAM LOCK c FROM PRE DRILLED HOLES e COVER THE CAM HOLES WITH PLASTIC COVER 4 5 9 e INSTALL THE WOOD DOWEL a AND THE CAM LOCK BOLT b INTO THE TOP PANEL A e JOIN THE TOP PANEL A TO THE ASSEMBLED PART BY USING WOODD DOWEL a FIRST e TIGHTEN THE CAM LOCK BOLT b BY USING THE CAM LOCK c FROM PRE DRILLED HOLES e COVER THE CAM HOLES WITH PLASTIC COVER d 6 9 e TIGHTEN THE BACK PANEL H BY USING THE ROUND HEAD SCREW 779 e INSERT THE SHELF PIN f IN THE DESIRED POSITION AND THEN PLACE THE ADJUSTABLE SHELF F ON THE PINS 8 9 e TIGHTEN THE METAL PLATE g THE BACK PANEL BY THE ROUND HEAD SCREW e TIGHTEN THE RECTANGLE METAL PLATE 1 TO THE REAR OF THE TOP PANEL BY USING 1 2 FLAT HEAD SCREW 2 e PLACE THE ASSEMBLED BOOKCASE AT THE DESIRED POSITION MARK THE INSERTION POINTS FOR THE PLASTIC ANCHOR 3 e USING THE PROPER HARDWARE FOR YOUR WALL TYPE DRILL TWO 1 4 HOLES INTO THE WALL e TIGHTEN THE RECTANGLE METAL PLATE 1 T2. HOME DECORATORS COLLECTION SK17779AR2 BRAMLEY HUTCH 44 Hx17 6 Wx14 D INV 19281 ASSEMBLY INSTRUCTIONS Made In China AAA 1 9 Thank you for purchasing this quality product Be sure to check all packing material carefully for small parts which may have came loose inside the carton during shipment Count all parts and material hardware then compare with parts list to be sure all parts are present If any parts are missing or damaged phone fax or mail to our Customer Service Department for efficient and speedy service Please indicate the model number and code letter of part s needed IMPORTANT NOTE Follow instructions listed below in proper sequence as numbered to assure fast easy and correct assembly PARTS LIST TOP PANEL 1PC 2 9 WOOD DOWEL 14PCS LOCK BOLT 10PCS ROUND PLASTIC COVER 8PCS HEAD SCREW 24PCS SHELF PIN 4PCS RECTANGLE 1 2 L FLAT PLASTIC ANCHOR METAL PLATE HEAD SCREW SS G PLASTIC 1 1 2 L FLAT BAND HEAD SCREW ANTI TIPPING HARDWARE PACKAGE METAL PLATE 2PCS NOTE THE SURFACE WITH THE STICKER IS THE BACK SIDE 3 9 NOTE UPON OPENING THOROUGHLY CLEAN ALL WOOD SURFACES TO REMOVE DUST AND DIRT THAT MAY HAVE SETTLED ONTO THE FINISH DURING SHIPMENT IN ORDER TO PREVENT DAMAGE DURING ASSEMBLY PLEASE ASSEMBLE THIS ITEM WITH AT LEAST TWO PEOPLE NOTE TURN THE CAM BOLT SCREWS UNTIL THEY ARE TIGHT THE SHOULDER SHOULD BE AGAINST THE
3. O THE PLASTIC ANCHOR 3 BY USING THE 1 1 2 FLAT HEAD SCREW 5 e USING THE PLASTIC BAND 4 CONNECT TWO RECTANGLE METAL PLATES 1 9 9
Download Pdf Manuals
Related Search