STERLING 3240-456C Instructions / Assembly
Contents
1. How To Assemble The Pre lit Palm Tree 7ft Trunk 5ft Trunk 1 Locate the three sections of the two trunks One section for the 5ft tree and two sections for the 7ft tree which will connect together to 7ft tree form the trunk li een 2 Locate the 2 tree tops The smaller one is for 5ft tree and the larger one is for Model 3259 57C poles 3 Locate the two sections of the base and the eight extension one side of the base 1 Ant ET 4 Remove the three screws from Join the two sections of the base together and replace the screws 6 Place the bottom section of the 7ft trunk so that it lines up with the 5 Insert the extension poles center rod of the base as shown above to make the Attach the trunk to the base Make sure not to cover the trunk clamps with the trunk Attach the eyebolts to the palms stable base and tighten the eyebolts on the inside of the tree to the stabilizing rod to make the trunk is secure Hook the trunk clamps on the base over the frame of the trunk and tighten as shown above Plastic tie Lae a x 5 8 Carefully clamp the connection of the top and lower sections of the trunk This will help make the trunk secure The trunk is shown here without the brown wrap for demonstration purposes only If you do not want to use the clamp you may also use the plastic tie which is also included 13 On the 7ft 12 C2. onnect 14 Connect the plug 9 Place the 5ft trunk on to the stand following the same instructions use on the 7ft to attach it to the base 19 3Shen 10 There is a wire rod attached to trunk of the 5ft palm Connect this rod to the loop on the 7ft trunk as shown above to atand r tha traacd Making sure they are tight as shown above 7 Attach the upper section of the 7ft trunk to the lower section Tighten the two eyebolts as shown above 11 Place the palm tops on to the correct trunks Be sure to tighten the eyebolts on the inside of the trunk to secure the top to the trunk 16 The palm tree 15 Shape the treetop by evenly spreading the also comes with 6 yard the plug from the top of the Sft tree to the trunk tree connect the plug from the upper section into the lower section from the upper section of the 7ft tree to the panel jack which is located on the top section of the tree green limbs into an arch from the center to the outer end of the limb Then plug the cords of 5ft and 7ft stakes These can be used to secure the base palms into the outlet to light tree Remark please of the palm trees for use the burlap clothes which come with the product outdoor use to cover the tree stand if necessary
Download Pdf Manuals
Related Search