Home Decorators Collection 2944200410 Instructions / Assembly
Contents
1. DECORATORS COLLECTION BF 25326 FREMONT MIRROR WALL CABINET INV 29442 ASSEMBLY INSTRUCTIONS Made In China MAX LOAD 30LBS 1 11 Thank you for purchasing this guality product sure to check all packing material carefully for small parts which may have came loose inside the carton during shipment Count all parts and material hardware then compare with parts list to be sure all parts are present If any parts are missing or damaged phone fax or mail to our Custormer Service Department for efficient and speedy service Please indicate the model number and code letter of part s needed IMPORTANT NOTE Follow instructions listed below in proper sequence as numbered to assure fast easy and correct assembly STRUCTURAL DIAGRAM 2 11 PARTS LIST DOOR 1PC 7mm x 5 8 Z CAM TOOL 1PC CAM BOLTS 10PCS CAM LOCKS 10PCS SCREWS 14PCS N x 5 8 0 P 8mm x 5 8 SCREW 1PC SHELF SUPPORTS 8PCS MAGNET 1PC SCREWS 5PCS SHEETIRONS 2PCS 3 11 U x 7 8 W 8mm x 1 SCREWS 5PCS 05 5 5 SCREWS 2PCS FEMALE MAGNET 1PC Y Smm x 1 2 NOTE THE SURFACE WITH THE STICKER IS THE BACK SIDE 4 11 NOTE UPON OPENING THOROUGHLY CLEAN ALL WOOD SURFACES TO REMOVE DUST AND DIRT THAT MAY HAVE SETTLED ONTO FINISH DURING SHIPMENT IN ORDER TO PREVENT DAMAGE DURING ASSEMBLY PLEASE ASSEMBLE THIS ITEM WITH AT LEAST TWO PEOPLE NOTE TURN THE C2. SCREW Y e ATTACH THE HANDLE O TO DOOR H USING 1 SCREW P e ATTACH THE HINGES M TO DOOR H USING 6 SCREWS N 8 11 7 ASSEMBLE THE SHEETIRON T e ATTACH THE SHEETIRON T TO TOP PANEL A USING 5 SCREWS S e ATTACH THE EVA 7 TO BACK PANEL G 8 ASSEMBLE THE DOOR H ATTACH THE DOOR H TO RIGHT SIDE USING 6 SCREWS N 9 11 9 ASSEMBLE THE SHELF SUPPORTS Q INSERT 8 SHELF SUPPORTS Q INTO THE HOLES IN THE SIDE PANEL B C 10 ASSEMBLE THE SHELVES E PUT THE SHELVES E ONTO THE SHELF SUPPORTS Q 10 11 H 11 ASSEMBLE THE SHEETIRON T DRILL 5 HOLES INTO THE WALL PLEASE REFER TO THE REAR BACK PANEL S HOLE DISTANCE AND HEIGHT TAP 5 GECKOS V INTO THE HOLES ON THE WALL THEN ROTATE 5 SCREWS U INTO THE GECKOS V e HANG THE CABINET ONTO THE SHEETIRONS T 11 11
3. AM BOLT SCREWS UNTIL THEY ARE TIGHT THE SHOULDER SHOULD BE AGAINST THE SURFACE OF THE PART HOW TO USE THE CAM TOOL ARROW 0 gt ARROW NOTE e THE ARROWS ON THE HIDDEN CAM LOCKS SHOULD POINT TO THE CAM BOLTS 5 11 1 ASSEMBLE THE MAGNET ATTACH THE TO ADORNING 0 USING 2 SCREWS W 2 ASSEMBLE THE RIGHT SIDE ROTATE CAM BOLTS J INTO THE HOLES IN THE RIGHT SIDE PANEL PLACE THE CAM BOLTS J INTO THE HOLES IN THE PANEL D F AND ATTACH USING 3 CAM LOCKS K 6 11 3 ASSEMBLE THE LEFT SIDE e ROTATE 3 CAM BOLTS J INTO THE HOLES IN THE LEFT SIDE PANEL B e PLACE THE CAM BOLTS J INTO THE HOLES IN THE PANEL D F AND ATTACH USING 3 CAM LOCKS K 4 ASSEMBLE THE TOP PANEL A e INSERT 2 DOWELS A1 INTO THE HOLES IN THE ADRNING PANEL D ROTATE 4 CAM BOLTS J INTO THE HOLES IN THE TOP PANEL A PLACE THE CAM BOLTS J INTO THE HOLES IN THE PANEL B C AND ATTACH USING 4 CAM LOCKS K 7 11 5 ASSEMBLE THE BACK PANEL e ATTACH THE BACK USING 14 SCREWS L 6 ASSEMBLE THE DOOR H e ATTACH THE FRMALE MAGNET X TO DOOR H USING 1
Download Pdf Manuals
Related Search