KOHLER K-16137-4-BV Installation Guide
Contents
1. 1 3 8 3 8 FINISHED WALL Fig 1 1 2 P S INLET 105833 2 AA A Copyright 1998 Kohler Co INSTALLATION Install two 1 2 P S nipples on inlet and outlet piping to extend to outside edge of finished wall Place wall bracket over nipples Insert sleeves into wall bracket and thread onto nipples Tighten sleeves using seat wrench or 7 16 square bar Install an O ring on vacuum breaker inlet and outlet ports Lubricate O rings to ease assembly Slide vacuum breaker inlet output ports into sleeves in wall bracket and secure with two socket head screws Use 5 32 hex head wrench NOTE Do not install shroud until all construction and rough installation is complete Place shroud over vacuum breaker with cut out over input output ports and threaded pin through hole at top of shroud Thread cover onto threaded pin until hand tight 105833 2 AA A 1 2 P S Nipples Wall Bracket ag Vacuum Breaker B gay Socket Head Screw Fig 2 Shroud Threaded Pin Kohler Co Kohler WI2. VACUUM BREAKER KOHLER INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN HOW TO USE THESE INSTRUCTIONS Please read these instructions carefully to familiarize yourself with the required tools materials and installation sequences Follow the sections that pertain to your particular installation This will aid you in avoiding the All information in these instructions is based on the latest product information available at the time of publication Kohler Co reserves the right to make changes in product characteristics packaging or availability at any time unnecessary expense associated with improper without notice installation In addition to proper installation read all operating and safety instructions NOTES TOOLS AND MATERIALS REQUIRED Review all local plumbing and building codes e Seat wrench Kohler 21261 or 7 16 square bar Bottom of vacuum breaker must be positioned at e Hex head wrench 5 32 least 6 above fixture rim Local codes may differ Thr adssalant Piping should run downward regardless of rough in height Variation and or finish color code may be required when ordering A CAUTION Risk of product damage Do not subject vacuum breaker to continuous pressure for more than 12 hours ROUGHING IN Rough in inlet and outlet piping using Fig 1 NOTE Locate outlet piping at the top and inlet piping at the bottom 7 8 2 D i y 1 2 P S OUTLET a T
Download Pdf Manuals
Related Search