none SW1480BN Installation Guide
Contents
1. Part Description Part Description A Blade AA Blade screw B Blade bracket BB Fiber washer C Mounting bracket CC Blade bracket screw D Mounting plate DD Plastic wire nut E Fan motor assembly EE Fan pull chain fob F Switch house FF Light kit pull chain fob G Switch house cover GG Mounting bracket screw H Fan housing HH Fan motor assembly switch house screw Light kit assembly l Light kit screw J Glass shade K 40W A15C bulb 14 Questions problems missing parts Before returning to the store call Customer Service 1 877 527 0313 HOMEDEPOT COM Retain this manual for future use2. Ensure the screws that attach the fan blade arm to the motor hub are tight Ensure wire nut connections are not rattling against each other or the interior wall of the switch housing Allow a 24 hour breaking in period Most noises associated with a new fan disappear during this time If using the ceiling light kit ensure the screws securing the glassware are tight Check that the light bulb is also secure Ensure there is a short distance from the ceiling to the canopy It should not touch the ceiling Ensure your ceiling box is secure and rubber isolator pads are used between the mounting bracket and outlet box The fan wobbles Check that all blade and blade arm screws are secure Most fan wobble problems are caused when blade levels are unequal Check this level by selecting a point on the ceiling above the tip of one of the blades Measure from a point on the center of each blade to the point on the ceiling Rotate the fan until the next blade is positioned for measurement Repeat for each blade Measurements deviation should be within 1 8 in Run the fan for 10 minutes Use the enclosed blade balancing kit if the blade wobble is still noticeable 13 HOMEDEPOT COM Please contact 1 877 527 0313 for further assistance Service Parts
3. and local electrical codes Electrical installation should be performed by a qualified licensed electrician 3 The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 35 Ibs Use only UL Listed outlet boxes marked FOR FAN SUPPORT 4 Thefan must be mounted with a minimum of 7 ft clearance from the trailing edge of the blades to the floor Avoid placing objects in the path of the blades To avoid personal injury or damage to the fan and other items be cautious when working around or cleaning the fan 7 Do not use water or detergents when cleaning the fan or fan blades A dry dust cloth or lightly dampened cloth will be suitable for most cleaning 8 After making electrical connections spliced conductors should be turned upward and pushed carefully up into the outlet box The wires should be spread apart with the grounded conductor and the equipment grounding conductor on one side of the outlet box and ungrounded conductor on the other side of the outlet box 9 All setscrews must be checked and retightened where necessary before installation not use this fan with any solid state fan speed control device j WARNING To reduce the risk of electrical shock or fire do It will permanently damage the electronic circuitry WARNING To reduce the risk of personal injury do not bend the blade arms also referred to as flanges when installing the brackets bal
4. peeling Brass finishes of this type give their longest useful life when protected from varying weather conditions A certain amount of wobble is normal and should not be considered a defect Servicing performed by unauthorized persons shall render the warranty invalid There is no other express warranty We hereby disclaim any and all warranties including but not limited to those of merchantability and fitness for a particular purpose to the extent permitted by law The duration of any implied warranty which cannot be disclaimed is limited to the time period as specified in the express warranty Some states do not allow limitation on how long an implied warranty lasts so the above limitation may not apply to you The retailer shall not be liable for incidental consequential or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by law Some states do not allow the exclusion of incidental or consequential damages so the above exclusion or limitation may not apply to you This warranty gives specific legal rights and you may also have other rights which vary from state to state This warranty supersedes all prior warranties Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer Contact the Customer Service Team at 1 877 527 0313 or visit WWW HOMEDEPOT COM P
5. the light kit screws Il previously loosened Install 4x40W A15C bulbs K included Attach the fan pull chain fob EE to the chain on the switch house F and attach the light kit pull chain fob FF to the chain on the light kit assembly 1 Restore power and your light kit is ready for use A E i HH m Se HOMEDEPOT COM Please contact 1 877 527 0313 for further assistance Operation Turn on the power and check the operation of your fan There are two pull chains available in your fan The fan pull chain controls the fan speed as follows 1 pull High 2 pulls Medium 3 pulls Low and 4 pulls Off The light kit pull chain turns the light ON or OFF The reverse switch is located on the surface of the switch housing This switch controls directions forward switch down or reverse switch up NOTE Wait for the fan to stop before reversing the direction of the blade rotation B Warm weather Counterclockwise Direction A downward air flow creates a cooling effect This allows you to set your air conditioner on a higher setting without affecting your comfort Cool weather Clockwise Direction An upward air flow moves warm air off the ceiling This allows you to set your heating unit on a lower setting without affecting your comfort Care and Cleaning Do Chec
6. Item 000 000 Model SW1480 WH USE AND CARE GUIDE CLARKSTON 52 INCH CEILING FAN Questions problems missing parts Before returning to the store call Customer Service 1 877 527 0313 HOMEDEPOT COM KI Listed Intertek Table of Contents Table of Contents sss sss sss sss sss sss essen 2 Safety Information eere 2 LUE 3 Pre installation cce cce e acce on eia noinine nani 3 C en 11 3 Tools Requil ed co tracce tronc 3 Hardware Irncl ded oe REREREREREREEEEER REPRE 4 Package Contents esses 5 Installation lt vsssssssssssssssssssssszssssgrssssssssstsrsssgsssssgzsissssgsssssss 6 Assembly orent nete emn nain nnne nnn n deme nnn aa 7 Hanging Te Falls saccos setae cescdersdacedesedstecesecassuenatetatetess 7 Attaching the Fan Blades eese 10 Installing tlie Light KI 11 jeu m 12 Care and Cleaning eene 12 Troubleshooting i snecitn ntn incu n nna in oen aia etna iu 13 Service Parts iac naci arid doa iaa lana cd 0 doi nad 14 Safety Information Read and Save These Instructions 1 Toreduce the risk of electric shock ensure electricity has been turned off at the circuit breaker or fuse box before beginning 2 All wiring must be in accordance with the National Electrical Code ANSI NFPA 70 1999
7. ancing the blades or cleaning the fan WARNING Do not insert foreign objects between rotating fan blades WARNING To reduce the risk of fire electric shock or personal injury mount the fan to the outlet box marked acceptable for fan support with the screws provided with the outlet box CAUTION To reduce the risk of personal injury use only the screws provided with the outlet box Warranty We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of 15 years after the date of purchase by the original purchaser We also warrant that all other fan parts excluding any glass or acrylic blades to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser We agree to correct such defects without charge or at our option replace with a comparable or superior model if the product is returned To obtain warranty service you must present a copy of the receipt as proof of purchase All costs of removing and reinstalling the product are your responsibility Damage to any part such as by accident misuse improper installa tion or by affixing any accessories is not covered by this warranty Because of varying climatic conditions this warranty does not cover any changes in brass finish including rusting pitting corroding tarnishing or
8. correctly and follow all steps Failure to correctly follow this step might cause the fan to fall HOMEDEPOT COM Please contact 1 877 527 0313 for further assistance Assembly Attaching the Fan Blades 6 Fastening the blade assemblies to the motor Attach the fan blades A to the blade bracket B using the blade screws AA and fiber washers BB Tighten the screws AA securely Align the motor holes to the blade bracket B and secure with the blade bracket screws CC Tighten the screws CC securely Repeat this procedure with the remaining blade assemblies T Alec y gt sF BB e 7 Assembly Installing the Light Kit T Finish the light kit assembly and glass shades mounting Disassemble the switch house cover G by removing the three screws HH on the switch house F Remove the three screws HH in the light kit assembly I While holding the light kit assembly I under your fan snap together the wire connection plugs NN Carefully push all wires back into the switch house G then install the light kit assembly I onto the switch house G with the three screws HH removed and securely tighten all screws To install light kit glass shade J loosen the light kit screws Il and install the glass shade J to the light kit I Secure by tightening
9. e the risk of fire electric shock or other personal injury mount the fan only to an outlet box or supporting system marked acceptable for fan support and use the mounting screws provided with the outlet box Attach the mounting bracket C to the outlet box with two screws and washers provided with the outlet box Make sure the mounting bracket C is tight and secured Hanging the fan to the mounting bracket Lift the fan into position by hanging the mounting plate D portion of the fan motor assembly E onto the hook from the ceiling mounting bracket C allowing it to hang freely HOMEDEPOT COM Please contact 1 877 527 0313 for further assistance Assembly Hanging the Fan continued 3 Making the electrical connections electricity is turned off at the circuit breaker or main fuse box ue i WARNING To avoid possible electrical shock be sure 1 before wiring O including ground and that no bare wire is visible at the wire WARNING Check to see that all connections are tight nuts except for the ground wire Follow the steps below to connect the fan to your house A s x3 B supply wires Secure the wire nuts DD supplied with your fan by wrapping the connections with electrical tape Black Blue White Green lack White Green Connect the black and blue color wires from the fan to the hot wire black fro
10. k the support connections brackets and blade attachments twice a year Ensure they are secure Because of the fan s natural movement some connections may become loose over time It is not necessary to remove the fan from the ceiling Clean your fan periodically Use only a soft brush or lint free cloth to avoid scratching the finish The plating is sealed with a lacquer to minimize discoloration or tarnishing Optional Apply a light coat of furniture polish to the wood blades Optional Cover small scratches with a light application of shoe polish 12 Do not Do not use water when cleaning Water could damage the motor or the wood or possibly cause an electrical shock Do not apply oil to your fan or motor The motor has permanently lubricated sealed ball bearings Troubleshooting panel box before you attempt any repairs Refer to the section WARNING Ensure the power is off at the electrical Making the Electrical Connections on page 8 Problem Solution The fan will not start Check the main and branch circuit fuses or breakers Check the line wire connections to the fan and switch wire connections in the switch housing Check to ensure the dip switches from the remote control and receiver are set to the same frequency The fan sounds noisy Ensure all motor housing screws are snug
11. m the ceiling Connect the white color wire from the fan to the neutral wire white from the ceiling If there is a ground wire green color or bare copper color in your outlet box 1 connect the green wire from the fan to it If there is not a ground wire in your outlet box connect the green wire from the fan to the green wire from the mounting bracket C Secure the wire connection with the plastic wire nuts DD Assembly Hanging the Fan continued 4 Attaching the fan motor assembly to the mounting bracket Remove one of the four screws GG on the mounting bracket C and loosen but do not remove the other three screws GG Remove the motor assembly D from the J hook Lift and place the key holes JJ on the mounting plate D over the three screws previously loosened on the mounting bracket C and turn the mounting plate D until it locks in place and no longer turns Secure by tightening the three screws previously loosened and the screw GG previously removed 5 Finishing the fan installation Align the four large screwheads MM pre locked on the fan housing H to the key holes KK of the mounting bracket C Turn the fan housing H at the right side and twist the screwheads MM to the end of the slotted holes LL until they lock in place and no longer turn WARNING Ensure you complete this step
12. motor assembly 1 K 40W A15C bulb 4 F Switch house pre assembled 1 5 HOMEDEPOT COM Please contact 1 877 527 0313 for further assistance Installation MOUNTING OPTIONS WARNING To reduce the risk of fire electric shock or personal injury mount the fan to an outlet box marked acceptable for fan support using the screws provided with the AN outlet box An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced If in doubt consult a qualified electrician If your ceiling fan does not have an existing UL listed mounting box then install one using the following instructions Disconnect the power by removing the fuses or turning off the circuit breakers Secure the outlet box 1 not included directly to the building structure Use appropriate fasteners and materials not included The outlet box and its bracing must be able to fully support the weight of the moving fan at least 35 Ibs Do not use a plastic outlet box The illustrations below show two different ways to mount the outlet box not included N Was P4 1 To hang your fan where there is an existing fixture but no ceiling joist you may need an installation hanger bar 2 not included as shown above Assembly Hanging the Fan 1 Installing the mounting bracket to the electrical box WARNING To reduc
13. re Installation SPECIFICATIONS Fan size Speed Volts Amps Watts RPM CFM N W G W C F Low X XX XX X XX XXXX XXX kas XXX kas 52in T Medium 120 XXX XXX XXX OK ox E a i XXX ft High X XX XX X XXX XXXX i NOTE These are approximate measures They do not include amps and wattage used by the light kit TOOLS REQUIRED GD Phillips Flat blade Step Wire Electrical d screwdriver d screwdriver ladder stripper Tape HOMEDEPOT COM Please contact 1 877 527 0313 for further assistance Pre Installation continued HARDWARE INCLUDED NOTE Hardware shown to actual size unless noted otherwise in the table below AA GG BB EE HH CC Il DD FF Part Description Quantity AA Blade screw 16 BB Fiber washer not to scale 16 CC Blade bracket screw 11 DD Plastic wire nut 3 EE Fan pull chain fob 1 FF Light kit pull chain fob 1 GG Mounting bracket screw preassembles 4 HH Fan motor assembly switch house screw preassembles 6 ll Light kit screw preassembles 12 Pre Installation continued PACKAGE CONTENTS J A H K B Part Description Quantity Part Description Quantity A Blade 5 G Switch house cover pre assembled 1 B Blade bracket 5 H Fan housing 1 C Mounting bracket 1 l Light kit assembly 1 D Mounting plate pre assembled 1 J Glass shade 4 E Fan
Download Pdf Manuals
Related Search