GE 17450 Instructions / Assembly
Contents
1. 17450 2 LED Path Light User s Manual Thank you on your purchase ofthe LED Path Light Before installation please read this manual carefully and keep for future reference Please check the contents before installation 1 LED Path Light EZ 2 2 screws and 2 Anchors INSTALLATION Before you mount your LED Path Light 1 Remove the LED Path Light back cover by loosening the screws on the back 2 Insert 4 NEW AA batteries making sure the polarity matches Do not put the back on unti you have gone through the mounting section of the User s Manual fon dy NOTE Please use only new alkaline or lithium batteries Do not mix old with new batteries Make sure that the polarity matches Mounting your LED Path Light Mounting your LED Path Light outside 1 Select the location for your LED Path Light Anchors drywall 2a If you are going to use the anchors then use a 3 16 drill bit drill the holes and insert the anchors Now insert the screws eaving them 1 8 from the surface height of the screw head Screws only 2b To install the screws only use a 1 8 O drill bit to drill the marked holes and then insert screws leaving them 1 8 from the surface height of the screw head 1 8 3 Now place LED Path Light screw tracks on the screws Make sure that they are secure Recommended to mount the screws parallel to the ground if you are mou2. nting on a vertical surface 1 4 Template guide Template A CAUTION e Batteries may leak harmful liquids or ignitable materials or explode causing injury and product damage Do not mix old and new or other battery types Replace all batteries at the same time Remove batteries if product is to be unused for extended periods of time 5 4 10 is a trademark of the General Electric Company and is used under license to Jasco Products Company LLC 10 E Memorial Road Oklahoma City OK 73114 This Jasco product comes with a limited lifetime warranty Visit www ascoproducts com for details
Download Pdf Manuals
Related Search