none 32257AT Instructions / Assembly
Contents
1. MODEL 52257 PACKING DIAGRAM ARDBOARD a 2 PCS STYROFOAM 12 KGS INIAL HARP amp RUBBER WASHER O o HTrINIAL RUBBER WASHER SHADE 32257SHAT REPLACEMENT PART HARP WHARP 8 5 PB REPLACEMENT HOLDER SOCKET ASSEMBLY PPER POLE AVAILABLE PARTS ARE LWHARP 8 5 PB HARP 32257SHAT SHADE ASSEMBLY READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH TO ASSEMBLY THIS LAMP SHOULD TAKE APPROXIMATELY 10 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED UNPACK THE LAMP YOU SHOULD HAVE THE FOLLOWING PARTS IN THE PACKAGE FINIAL RUBBER WASHER SHADE HARP SOCKET ASSEMBLY 2 POLES AND BASE TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE ASSEMBLE THE LAMP 1 CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A SMOOTH FLAT SURFACE LINE UP ALL OF THE PARTS ACCORDING TO THE ASSEMBLY DIAGRAV 2 SCREW LOWER POLE TO TOP OF THE BASE SCREW POLE TO TOP OF THE LOWER POLE 5 4 PULL THE EXCESS POWER THROUGH THE BASE 9 ASSEMBLY OF THE UPPER POLE 6 SQUEEZE LEGS OF THE AND INSERT THE ENDS BETWEEN THE PRONGS OF THE HARP HOLDER 7 PLACE SHADE ONTO HARP THEN SECURE WITH RUBBER WASHER AND FINIAL INSTALL 150 WATT MAXIMUM MEDIUM BASE TYPE 3 WAY BULB NOT INCLUDED INTO SOCKET 92. PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT SWITCH BULB REPLACEMENT 1 BEFORE REPLACING THE BULB BE SURE THAT THE SHADE AND BULB ARE COOL AND LAMP IS UNPLUGGED 2 UNSCREW EXISTING BULB FROM SOCKET AND REPLACE WITH A NEW BULB PLUG POWER SUPPLY CORD BACK INTO OUTLET TROUBLE SHOOTING 1 IF YOUR LAMP DOES NOT LIGHT CHECK PLUG AT THE OUTLET MAKE SURE THE PLUG IS FULLY AND PROPERLY INSERTED INTO THE POWER OUTLET 2 IF LAMP STILL DOES NOT LIGHT UNPLUG FROM OUTLET CHECK THE BULB FOR A BROKEN FILAMENT REPLACE BULB IF NECESSARY PLUG IN LAMP AND TURN IT ON 3 IF THE LAMP STILL DOES NOT LIGHT PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE IMPORTANT SAFETY INSTRUCTIONS THIS PORTABLE LAMP HAS A POLARIZED PLUG ONE BLADE IS WIDER THAN THE OTHER AS A FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET REVERSE THE IF IT STILL DOES FIT CONTACT A QUALIFIED ELECTRICIAN NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED DO NOT ALTER THE 06 2013 32257 INSTRUCTIONS
Download Pdf Manuals
Related Search