Kenroy Home 93089COP Installation Guide
Contents
1. TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE INSTALLING THE LANTERN 1 REMOVE THE ROOF FROM LANTER CAGE BY UNSCREWING 2 FINIALS 2 INSTALL A 100 WATT MAXIMUM MEDIUM BASE TYPE A BULB NOT INCLUDED INTO SOCKET 3 REPLACE THE ROOF TO TOP OF THE LANTERN CAGE THEN SECURE WITH 2 RUBBER WASHERS AND 2 FINIALS REMOVED ABOVE 4 RAISE THE LANTERN BODY UP TO POST FOR WIRING ATTACH THE WHITE OR RIBBED LANTERN WIRE TO THE WHITE SUPPLY WIRE USING A WIRE CONNECTOR ATTACH THE BLACK OR SMOOTH LANTERN WIRE TO THE BLACK SUPPLY WIRE WITH A WIRE CONNECTOR ATTACH THE LANTERN AND SUPPLY GROUND WIRES TOGETHER AND SECURE WITH A WIRE CONNECTOR 5 PLACE THE LANTERN BODY ON POST AND ALIGN HOLES THEN SECURE WITH 3 MOUNTING SCREWS 6 RESTORE POWER YOUR LANTERN IS NOW READY FOR USE 10 2013 93089 INSTALLATION2. MODEL 93089 PACKING DIAGRAM LLI B88 gt arrs HS STYROFOAM 12 KGS AVAILABLE PART IS OOF 93087GS GLASS SHADE Ne 2 PCS RUBBER WASHER 2 PCS OUNTING SCREW 3 PCS FIXTURE GROUND WIRE BLACK FIXTURE WIRE HITE FIXTURE WIRE CAGE LASS SHADE WHITE SUPPLY WIRE 9308765 SUPPLY GROUND REPLACEMENT WIRE POST WIRING DIAGRAM READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY THIS LANTERN SHOULD TAKE APPROXIMATELY 5 MINUTES TO ASSEMBLE POST MOUNT MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED CAUTION TO AVOID POSSIBLE ELECTRIC SHOCK MAKE SURE THE ELECTRICITY IS SHUT OFF AT THE MAIN PANEL IF YOU ARE REPLACING AN EXISTING FIXTURE FIRSTLY TURN THE FIXTURE OFF NEXT TURN THE WALL SWITCH OFF FINALLY GO TO THE MAIN FUSE OR BREAKER BOX IN YOUR HOME TURN THE FUSE OR BREAKER TO THE OFF POSITION SOME TYPES OF FUSES MUST BE UNSCREWED TO SHUT OFF THE POWER ALL WIRING MUST BE DONE IN ACCORDANCE WITH NATIONAL AND LOCAL ELECTRIC CODES IF YOU DO NOT HAVE ELECTRICAL WIRING EXPERIENCE HAVE YOUR LANTERN INSTALLED BY A QUALIFIED LICENSED ELECTRICIAN THIS LANTERN IS TO BE MOUNTED TO A UL LISTED POST CAPABLE OF SUPPORTING THE WEIGHT OF THE LANTERN TOOLS YOU WILL NEED THE FOLLOWING TOOLS OR EQUIPMENT LADDER SCREWDRIVER UNPACK THE LANTERN YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE PACKAGE LANTERN BODY 3 MOUNTING SCREWS AND 3 WIRE CONNECTORS
Download Pdf Manuals
Related Search