Design House 154088 Instructions / Assembly
Contents
1. CEILING FAN REMOTE CONTROLLER OPERATION AND INSTALLATION INSTRUCTIONS Please keep this instruction pamphlet IMPORTANT YOU MUST SET CEILING FAN TO HIGH SPEED AND LIGHT KIT IF ANY TO BE ON POSITION BEFORE OPERATING REMOTE CONTROL THE LIGHT WILL BE TURNED ON ONCE AC POWER CONNECTED IMPORTANT POINTS TO REMEMBER 1 Read and save these instructions Please note that all fixed wiring appliances should be installed by a qualified electrician The supply to the remote control receiver should be connected through a main switch 1 e existing wall switch Disconnect from power supply at wall switch before working on remote control receiver or ceiling fan Install receiver into the ceiling fan canopy to ensure proper protection see page 2 This unit is to be used for the control of ceiling fan in a AC110 120V 60Hz power supply only Do not pull on or cut leads shorter Do not drop or bump the unit PLEASE NOTE The battery will weaken with age and should be replaced before leaking takes place as this will damage the transmitter Dispose of used battery properly keep the battery out of reach of children eS See SS CAUTION To reduce the risk of fire or injury do not use this product in conjunction with any variable rheostat wall control CODE SWITCH 1 CODE SWITCH Codes are set by pushing dip switches up or down It is imperative that the code used for both transmitter and receiver is exactly the same otherwise remote controll2. N position by pulling the Pull Switch after installation 2 Once the connection has been made the receiver inserts into the drop rod hanging bracket The canopy comes up to cover the receiver and bracket Mount Holder with two screw ANTENNA AC POWER SUPPLY Leave unconnected and do not cut BLACK WHITE Mains Live Mains Neutral ANTENNA BLACK BLUE Light Live WHITE Fan Light Neutral BLACK Fan Live VIFW AFTER INSTAT TATION
3. er will not work Please note the code switch will enable you to operate a second remote controller independently For example if you have two ceiling fans with 2 remot control units set 2 different codes for each set of transmitter receivers This means you can operate each ceiling fan independently 2 Your remote control is ready for use after battery installation Beg Ne One VOLE AUEYY TO OPEN BATTERY HOUSING COVER BY PRESS DOWN AND SLIDE OUT faataa alt DIP SWITCH ANTENNA TRANSMITTER FUNCTIONS OF TRANSMITTER OFF Turn off the ceiling fan HI Turn on the fan at high speed MED Turn on the fan at medium speed FAN OFF HIGH FAN LOW Turn on the fan at low speed BUTTON SPEED 7 MEDIUM LIGHT DIM The LIGHT DIM button will control the light brightness i FAN SPEED The light function is controlled by pressing the button Hold button down to BUTTON increase or decrease light Tap button quickly to turn light off or on LOW FAN SPEED if you press the button in excess of 0 7 second it become a dimmer Only use incandescent bulbs Ceiling Fan Remote Control Wiring Connection Lo g TO FAN LIGHT NEUTRAL WHITE TO FAN LIVE BLACK m i N O TO LIGHT LIVE m BLUE J WHITE AC POWER FAN MOTOR INPUT eee Installation of Transmitter Wall ANTENNA INSTALLATION INSTRUCTIONS CAUTION INCORRECT WIRE CONNECTION WOULD DAMAGE THIS RECEIVER 1 Ceiling fan must be set a HIGH speed and light kit 1f any at O
Download Pdf Manuals
Related Search