the great outdoors by Minka Lavery 8126-A188-PL Instructions / Assembly
Contents
1. INSTALLATION INSTRUCTIONS For Outdoor Lantern Rev 31 08 2011 READ AND SAVE THESE INSTRUCTIONS WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER AVERTISSEMENT COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR 1 Shut off power at the circuit breaker and remove the old fixture including mounting hardware 2 Carefully unpack your new fixture and lay out all the parts on a clear area Take care not to misplace any small part necessary for installation 3 Pull the black white and ground wires out of the post G 4 While supporting the lantern connect the electrical wires as shown in Fig 2 If your outlet has a ground wire green or bare copper connect the fixture ground wire to it If not consult your electrician for proper grounding After wires are connected tuck them carefully inside the post Align the lantern with the post and secure with screws F Fig 1 amp 2 5 Install the PL bulb B included into socket D in accordance with the fixture s specification DO NOT EXCEED THE SPECIFIED WATTAGE NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE 6 The ballast and lamp are combined to replace or install twist pins into socket as shown on Fig 3 7 This fixture is rated for a minimum start temperature of 0 degrees Fahrenheit 17 degree Celsius 8 This fixture is ETL Listed for Wet Location applications i 9 Screw the glass shade A onto the fixture body C by Fig 2 twisting it clockwis2. e as shown in Fig 1 ppguRE C_D WR Gay Your installation is now complete Return power to the junction box and test the fixture Note Illustration Fig 1 on this manual is for ES installation purposes only It may or may not be Neutral Ground identical to the fixture purchased Warning When re lamping please use UL and CUL Listed Self Ballast Fluorescent Lamp certificated by UL1993 LA 1149E A d al m american 1st EEANN Intertek
Download Pdf Manuals
Related Search