the great outdoors by Minka Lavery 72433-261 Instructions / Assembly
Contents
1. INSTALLATION INSTRUCTIONS Item 72433 261 READ AND SAVE THESE INSTRUCTIONS WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER AVERTISSEMENT COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR ASSEMBLING THE FIXTURE Fig 1 Fig 1 1 Insert front glass K into door J and secure with clips L 2 Insert back glass M and side glass N into lamp body H H and secure with clips I e MOUNTING THE FIXTURE Fig 2 J 3 Shut off the power at the fuse box or circuit breaker If ANO H necessary remove the old fixture including the mounting lf i K hardware I WoL 4 Carefully remove the new fixture from the carton and Pee a gt M check that all parts are included as shown in the i if illustration 5 Thread screws A into the pre drilled holes in the circular i gt N strap C spaced the same distance apart as the holes in the back plate of the fixture body and secure with hex nut B f 6 Attach the circular strap C to the junction box using the mounting screws D size 8 32N L0 5 The side of Fig 2 circular strap C marked GND must face out 7 The support cable is provided to support the weight of the fixture while wiring Align the fixture to circular strap C and attach hook G on the end of support cable into a slot located on circular strap C Carefully allow the support cable to support th2. e weight of the fixture while wiring Fig 2 CONNECTING THE WIRES Fig 3 8 At this point connect the electrical wires as shown in figure3 making sure that all wire connectors are secured If your outlet has a ground wire green or bare copper connect the ground wire from the fixture to it Otherwise e ais connect the ground wire from the fixture directly to the Ground Screw tall circular strap C and secure with the green screw Mounting Screw 2 provided After wires are connected tuck them carefully into the outlet box with cap nuts F Fig 3 FINISHING THE INSTALLATION Fig 2 9 To prevent moisture from entering the outlet box and patare C D Wees ECO Black or causing a short use clear silicone sealant to outline the Smooth outside of fixture back plate E where it meets the wall leaving a space at bottom to allow moisture a means to escape Fig 4 10 Install the light bulbs not included in accordance with the fixture s specifications DO NOT EXCEED THE MAXIMUM WATTAGE RATING NE PAS m DEPASSER LA PUISSANCE NOMINALE Ri MAXIMALE lighting White or Green or Ribbed Bare Copper Ground White Green Neutral Ground association test the fixture Note Illustration Fig 1 Fig 2 on this manual is for in
3. stallation purposes only It may or may not be _ identical to the fixture purchased Intertek Backplate Your installation is now complete Return power and LISTED 7 Caulking
Download Pdf Manuals
Related Search