Kenroy Home 32324ORB Installation Guide
Contents
1. MODEL 325240FRB PACKING DIAGRAM STYROFOAM 12 KGS 2 FINIALS 2 HARPS amp 2 RUBBER WASHERS SOCKET ASSEMBLY 2 POS LAMP BODY STYROFOAM 12 KGS ASSEMBLY INSIRUCTHONS Q NL READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO RUBBER ASSEMBLY WASHER THESE TWO LAMPS SHOULD TAKE APPROXIMATELY 10 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED UNPACK THE LAMP YOU SHOULD HAVE RECENVED THE FOLLOWING PARTS IN THE PACKAGE 2 FINIALS 2 RUBBER WASHERS 2 SHADES 2 HARP 2 SOCKET ASSEMBLIES AND 2 LAMP BODIES TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE ASSEMBLE THE LAMP 1 CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A SHADE SMOOTH FLAT SURFACE LINE UP ALL OF THE PARTS 2324SHORB ACCORDING TO THE ASSEMBLY DIAGRAM REPLACEMENT s 2 PULL THE EXCESS POWER CORD THROUGH BASE HARP 3 SCREW SOCKET ASSEMBLY TO TOP OF LAMP BODY USE NI 4 SQUEEZE LEGS OF THE HARP TOGETHER AND INSERT THE TWO ENDS BETWEEN THE PRONGS OF THE HARP HOLDER 5 PLACE SHADE ONTO HARP THEN SECURE WITH RUBBER WASHER AND FINIAL 6 INSTALL A 100 WATT MAXIMUM MEDIUM BASE TYPE A BULB NOT INCLUDED INTO SOCKET 7 PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT SWITCH BULB REPLACEMENT 1 BEFORE REPLACING THE BULB BE SURE THAT THE SHADE AND BULB ARE COOL AND LAMP IS UNPLUGGED 2 UNSCREW EXISTING BULB FROM SOCKET AND REPLACE WITH A NEW BULB PLUG POWER SU2. PPLY CORD BACK INTO OUTLET TROUBLE SHOOTING 1 IF YOUR LAMP DOES NOT LIGHT CHECK PLUG AT THE OUTLET MAKE SURE THE PLUG IS FULLY AND PROPERLY INSERTED INTO THE POWER OUTLET 2 IF LAMP STILL DOES NOT LIGHT UNPLUG FROM OUTLET CHECK THE BULB FOR A BROKEN FILAMENT REPLACE BULB IF NECESSARY PLUG IN LAMP AND TURN IT ON 3 IF THE LAMP STILL DOES NOT LIGHT PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE IMPORTANT SAFETY INSTRUCTIONS THIS PORTABLE LAMP HAS A POLARIZED PLUG ONE BLADE IS AVAILABLE PARTS ARE WIDER THAN THE OTHER AS A FEATURE TO REDUCE THE LWHARP 8 PB HARP RISK OF ELECTRIC SHOCK THIS PLUG WILL FIT IN A 32324SHORB SHADE POLARIZED OUTLET ONLY ONE WAY IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET REVERSE THE PLUG IF IT STILL DOES NOT FIT CONTACT A QUALIFIED ELECTRICIAN NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED DO NOT ALTER THE PLUG 0772013 32324ORB INSTRUCTIONS
Download Pdf Manuals
Related Search