Kenroy Home 32435NCED Instructions / Assembly
Contents
1. ER SUPPLY CORD BACK INTO OUTLET TROUBLE SHOOTING 1 IF YOUR LAMP DOES NOT LIGHT CHECK PLUG AT THE OUTLET MAKE SURE THE PLUG IS FULLY AND PROPERLY INSERTED INTO THE POWER OUTLET 2 IF LAMP STILL DOES NOT LIGHT UNPLUG FROM OUTLET CHECK THE BULB FOR A BROKEN FILAMENT REPLACE BULB IF NECESSARY PLUG IN LAMP AND TURN IT ON 3 IF THE LAMP STILL DOES NOT LIGHT PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE IMPORTANT SAFETY INSTRUCTIONS THIS PORTABLE LAMP HAS A POLARIZED PLUG ONE BLADE 15 AVAILABLE PARTS WIDER THAN THE OTHER AS A FEATURE TO REDUCE THE RISK HARP9 5 HARP OF ELECTRIC SHOCK THIS PLUG WILL FIT IN A POLARIZED OUTLET 32435SHNCED SHADE ONLY ONE WAY IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET REVERSE THE PLUG IF IT STILL DOES NOT FIT CONTACT A QUALIFIED ELECTRICIAN NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED DO NOT ALTER THE PLUG 02 2014 32435NCED INSTRUCTIONS2. MODEL 32435NCED PACKING DIAGRAM INNER BOX INIAL HARP amp RUBBER WASHER NNER BOX FOR LAMP BODY SOCKET ASSEMBLY TITLE 20 ASSEMBLY INSTRUCTIONS Q ate READ AND SAVE THESE INSTRUCTIONS RUBBER WASHER READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY THIS LAMP SHOULD TAKE APPROXIMATELY 5 MINUTES ASSEMBLE MAKE SURE ALL PARTS FIRMLY TIGHTENED UNPACK THE LAMP YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE PACKAGE FINIAL RUBBER WASHER SHADE HARP SOCKET ASSEMBLY AND LAMP BODY TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE ASSEMBLE THE LAMP 1 CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A SMOOTH FLAT SURFACE LINE UP ALL OF THE PARTS ACCORDING TO THE ASSEMBLY DIAGRAM SHADE 524555 2 PULL THE EXCESS POWER CORD THROUGH THE BASE REPLACEMENT PART 3 SCREW THE SOCKET ASSEMBLY TO TOP OF THE LAMP BODY ae 4 SQUEEZE LEGS OF THE HARP TOGETHER AND INSERT THE TWO REPLACEMENT ENDS BETWEEN THE PRONGS OF THE HARP HOLDER 5 PLACE SHADE ONTO HARP THEN SECURE WITH RUBBER WASHER AND FINIAL 6 INSTALL A 150 WATT MAXIMUM MEDIUM BASE 3 WAY BULB NOT INCLUDED INTO THE SOCKET 7 PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT SOCKET SWITCH ASSEMBLY BULB REPLACEMENT 1 BEFORE REPLACING THE BULB BE SURE THAT THE SHADE AND BULB ARE COOL AND LAMP IS UNPLUGGED 2 UNSCREW EXISTING BULB FROM SOCKET AND REPLACE WITH A NEW BULB PLUG POW
Download Pdf Manuals
Related Search