Minka Lavery 3132-77 Installation Guide
Contents
1. to open one end link of the chain and connect to the fixture loop A Close the link 7 By measuring determine correct number of links needed for proper hanging height Using pliers disconnect and discard remaining chain FIXTURE LOOP A SMALL RING B HOLE C CRYSTAL DROP PIETS CHAINE ii FABRIC SHADE G CANDLE COVER H SOCKETO NIPPLE COUPLING X SMALL RINGIL SMALL RING D oN Canapy 8 Lace the fixture wires through the chain V j T 9 Slip collar ring W over the chain V then do the same with l e u Vig Fi canopy S apex 7 BF 40 Opeh the other end link of the chain V and connect to the colla VV loop R Close the link 41 Feed the fixture wires through the collar loop R and nipple Q and pull until taut CONNECTING THE WIRE See fig 3 4 Take the black wire from the ceiling outlet box and the smooth wire leg from the fixture and twist bare ends together Twist wire connector onto end of wire until snug 2 Repeat same process with white junction box wire and ribbed aahi A FORT wire leg of fixture wire NOTE Twist wire together in the same ges WHITE OR GREEN OR direction then twist the wire connector onto wire SMOOTH ae 3 lf your outlet box has a grounding wire Green or bare GROUND HOUSE copper Attach this wire and the bare copper wire from the WIRES fixture together as step 1 If outlet box has no ground wire cera core Attach2. INSTALLATION INSTRUCTION FoR FIXTURE 3131 77 3132 77 READ AND SAVE THESE INSTRUCTIONS ASSEMBLY THE FIXTURE FIG 2 i Carefully unpack your new fixture and lay out all the parts in a LH clear area Take care noj to lose any small paris necessary for Arar installation nG Thread one end of the nipple J into the coupling K tightly Insert the bracket M over the other end of the nipple J then secure with fixture loop A tightly 4 Connect one end of the crystal chain F to the hole C and the other end to the small ring L 5 Insert the candie cover H over the socket 1 then put the fabric shade G set over the candle cover well 6 Install the light bulb in accordance with fixture s specifications DO NOT EXCEED THE MAXMUM WATTAGE RATING 7 Hook the crystal drop E to the small ring B D MOUNTING THE FIXTURE FIG1 1 Shut off the power supply at the fuse box or circuit breaker box Remove the oid fixture from ceiling Including the cross bar 2 Thread the nipple Q into the collar loap R until snug 3 Thread the other end of nipple Q into the cross bar N properly 4 Place lock washer O over the end of nipple Q protruding through cross bar N and thread hex nut P onto nipple Q until tight 5 Take this crossbar assembly and mount to ceiling outlet box T using outlet box screw U tightly The side of cross bar marked with GND must face out 6 Use proper chain pliers
3. the bare copper fixture wire to the green ground screw on the cross bar 4 Tuck these wires connectors neatly into the ceiling out let bo er and raise the collar ring W and thread onto collar loop R Bo x MAS IG 2 x rag AK q h hh protruding through canopy Your installation is now complete Return power to the junction box N AVG 2 Us KS and test the fixture a Notice It is important to use proper chain pliers not In lud d to OPEN and CLOSE the chain included with this fixture Do not open them with other tools that may hajot ar straas the chain links It is important to use proper L LISTED
Download Pdf Manuals
Related Search