Minka Lavery 1562-477 Installation Guide
Contents
1. INSTALLATION INSTRUCTIONS FOR 1562 477 For Wall Mount Fixture U S Patent No D530 850 WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER MOUNTING THE FIXTURE Installation see fig 1 1 Shut off the power at the circuit breaker and remove old fixture including the mounting plate 2 Thread the two mounting screws about 1 4 into the pre drilled holes in the mounting plate spaced about the same distance apart as the holes in the fixture back plate Attach the mounting plate to the junction box using two junction box screws The side of the mounting plate marked GND must face out 3 Follow wiring instructions carefully see fig 2 4 Mount fixture by aligning mounting holes in fixture back plate with mounting screws and threading ball nuts A onto mounting screws 5 Place the socket sleeve C over the socket B 6 Install the light bulbs in accordance with the fixture s specifications DO NOT EXCEED THE MAXIMUM WATTAGE RATING 7 Clip e to the bulbs th cloth shades D on Wiring see fig 2 1 Connect the electrical wires as follows Connect the black wire from the fixture to the black house hot Wire Connect the white wire from the fixture to the white neutral house wire Make sure all wire nuts are secured You may wrap the connections with electrical tape If your outlet box has a ground wire green or bare copper connect fixture s ground wire to it Otherwise attach the bare copper fixture2. wire to the green ground screw on the mounting plate 2 Tuck the wire connections neatly into the wall junction box Fig 2 Fig 1 Hot WIRES Black HOUSE Black or WIRES FIXTURE Ground Copper WIRES Bare FIXTURE Neutral FIXTURE WIRES White or HOUSE White WIRES WIRES HOUSE Green or Bare Copper Ground Smooth Ribbed
Download Pdf Manuals
Related Search