1. ASSEMBLY INSTRUCTION SKU 7426289 Note Please consult a qualified electrician if you are not certain of the installation CAUTION Before starting the installation disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box 1 Thread 2 outlet box screws into the cross bar Attach the cross bar by tightening the outlet box screws securely into the outlet box 2 Connect wire with white to white and black to black cover the connections by using the wire connectors provided Tie the ground wire from outlet box and from fixture to the ground wire screw on the cross bar Install bulbs not included Secure the nipple to the connector firmly and then tighten the top finial Place the glass shade over nipple and use the cap and bottom finial to tighten the fixture body Carefully tuck all wiring back into outlet box Place the wall plate onto the wall until mounting screws protrude out from the wall plate Then secure the fixture using lock nuts provided Turn on the power x DARL Top Finial Fixture Body Outlet Box Screw Bulb ai T E g iS baa hs jie m Vall Plate A aA I Ht WAXY a ane Mounting Screw Nipple Ground Wire wi gi Ground Wire fe Finial