Athens Stonecasting 04-914013AP Instructions / Assembly
Contents
1. Assembling Your Acanthus Fountain Caution Keep children and others from climbing sitting or leaning on the fountain and its components Failure to do so could cause serious injury Fountains have no interlocking component parts Fountain parts are held by gravity only MATERIALS LIST Pump Hose 4 Level Plastic Shims or Metal Washers Silicone or Fountain Putty ASSEMBLY INSTRUCTIONS 1 Place Pedestal A on level firm foundation 2 Balance bottom bowl B on pedestal A 3 Place pump into pump cavity of bowl B Guide electrical plug thru hole in bottom of bowl and drop cord thru pedestal A 4 Center bowl B over pedestal A 5 Wrap cord plug around cord and wedge tightly in hole in bottom of bowl B 6 Fill around plug with silicon fountain putty or plumbers putty and allow to set up Use a level and shims to assure bowl is level 7 Attach hose to center of pump Be sure not to let hose kink 8 Cut off excess hose Leave 2 3 inches for topper C 12 Sit topper C on bowl B and slide hose into bottom of topper C 13 Fill fountain with water Plug pump cord into 110 volt GFI outlet 14 Pump has a flow control slide switch which can be adjusted to modify water flow to reach desired volume Contact help athensstonecasting com
Download Pdf Manuals
Related Search