none Ele-Flg2019HF- Mini Pallet Instructions / Assembly
Contents
1. FlagStone Installation Sheet STEP 1 Pull all the flagstones out of the package and look for the different tab configurations they are One Two amp Three Start laying out the pattern prior to commencing STEP 2 refer to diagram Align the straight edge sides together and make sure the tabs are all in the center area STEP 3 refer to diagram Line up the curved points to properly align the center of our pattern Make sure to line up the tabs accordingly STEP 4 refer to diagram Align grout joint using the clearly marked spacer on the package Cut out the spacer with scissors and use to keep the grout joints equally spaced STEP 5 Clean the surface with a wire brush or power wash to insure a clean surface STEP 6 Mix Polymer Thin set as needed and apply with a 1 2 notch trowel STEP 7 Apply flagstones as pictured and firmly push them into the thin set Allow thin set to dry approximately 12 hrs prior to starting the grouting process STEP 8 Mix grout as selected and use sponge or grout bag to apply and clean with water after Allow roughly 12 hours prior to walking on your new flagstone project ELEMENTS ARCHITECTURAL SURFACES
Download Pdf Manuals
Related Search