Intermatic T8805P101D89 Instructions / Assembly
Contents
1. MODEL T8805P101C un PROGRAM TIME SWITCH WITH 14 DAY SKIPPER WHEEL FOR UP TO 60 OPERATIONS PER DAY SWITCH RATING SINGLE POLE SINGLE THROW 15 AMP 1 2 H P 125 VOLTS A C CLOCK MOTOR 125 VOLTS 60 HZ NOT FOR DIRECT PUMP CONTROL GROUND TO GREEN TIME POINTER GROUND WIRE S No LINE BLACK 120 VOLT _ SKIPPER POWER common CLOCK SUPPLY SELECTOR NEUTRAL TO SWITCH WHITE SOLENOID FIGURE 1 WIRING DIAGRAM PROGRAMMING INSTRUCTIONS 1 TO SET FIRST ZONE For watering push gold pin into slot on yellow dial at desired ON time For each 12 minutes of additional watering add one pin WITHOUT skipping a slot 2 TO CHANGE ZONES Leave one blank slot on yellow dial after ON line gold pin and valve will automatically advance to next zone 3 TO SET ADDITIONAL ZONES Repeat steps 1 and 2 REMEMBER to leave blank space between zones 4 TO SET TIME OF DAY Turn yellow dial CLOCKWISE until correct line is at end of silver time pointer Do NOT turn silver pointer 5 TO SKIP DAYS Turn black skipper wheel COUNTER CLOCKWISE until todays day is in front of 14 arrow Press pins DOWN on days of NO watering The skipper wheel must have all pins UP for daily watering 6 PUT SELECTOR SWITCH IN AUTO This switch can be used to turn the system ON or OFF for manual operation without affecting the set program IMPORTANT NOTICE Use the one silver pin that is located at Midnight on the yellow dial it advances the2. skipper wheel automatically Do NOT use multiple silver pins Follow The National Electrical Code and local code requirements when installing this time switch CAUTION Always disconnect power at main panel before servicing this Switch or the equipment it controls INTERMATIC INCORPORATED SPRING GROVE ILLINOIS 60081 9698 158TS11854
Download Pdf Manuals
Related Search