Total Pond UW16257 Installation Guide
Contents
1. the manufacturer the representatives or any other parties do not constitute warranties should not be relied upon by the user and are not part of the contract for sale The sellers and manufacturer s only obligation and buyer s only remedy shall be for the manufacturer to either replace and or repair at the manufacturer s sole discretion the product as described above Neither seller nor the manufacturer shall be liable for injury loss or damages for lost profits lost sales injury to person or property or any other incidental or consequential loss arising from any cause whatsoever no matter whether based upon warranty contract negligence or other misuse and the buyer and user agree that no other remedy shall be available to them Before using the buyer and user shall determine the suitability of the product for the intended use and assume all risk and liability whatsoever in connection therewith The warranty and remedy described in this limited warranty is an exclusive warranty and remedy in lieu of any other warranty or remedy expressed or implied All other warranties and remedies are hereby expressly excluded including but not limited to any implied warranty of merchantability of fitness for any particular purpose This warranty gives the buyer and user specific legal rights and buyer and user may also have other rights which vary from state to state Some states do not allow exclusions or limitations of incidental or consequential d2. OONN ITEM UW16257 NN Decorative Floating Lights TotalPond REMINDER Questions problems missing parts Before returning to your CALL 1 888 412 6001 retailer call our customer service department at BEFORE RETURNING TO STORE 1 888 412 6001 8 a m 6 p m EST Monday Friday or email us at customercare totalpond com Or visit our website www totalpond com PACKAGE CONTENTS Part Description Quantity A Lights 1 B Sensor 1 C Transformer 1 A WARNINGS AND CAUTIONS WARNING To reduce the risk of electrical shock connect only to a properly grounded grounding type receptacle Do not exceed the voltage shown on the transformer Do not submerge the transformer and sensor To reduce the risk of fire or injury keep lamp away from materials that may burn Always disconnect light from the power source before beginning any maintenance or work on the light Inspect cord for damage before installation and or maintenance Replace the entire light transformer assembly if damage is found CAUTION Use a proper power source as indicated on the transformer label Keep the cord away from high temperatures or other heat sources Do not lift the light or the transformer by its power cord This light assembly is not intended for use in swimming pools or hot tubs PREPARATION Before beginning assembly or operation of product make sure all parts are present Compare parts with package contents list a
3. amages so the above limitations or exclusions may not apply to you CALL 1 888 412 6001 BEFORE RETURNING TO STORE
4. nd diagram above If any part is missing or damaged do not attempt to assemble install or operate the product Contact customer service for replacement parts e Estimated Assembly Time 5 minutes e Tools required for assembly Shovel ASSEMBLY INSTRUCTIONS These lights can be placed in or out of the water For installation in the water proceed to step 1 For installation outside of the water proceed to step 2 1 Place the lights in the water Anchoring the lights using string and a weight is recommended Fig 1 NOTE String and the weight are NOT INCLUDED 2 Dig three holes approximately 3 inches deep Place the lights in the holes then bury the stakes Fig 2 NOTE Do not push down on the lights when installing in the ground The lights are made of glass and can break if not installed correctly 3 Make sure that the transformer and sensor are NOT submerged Make sure that the light sensor faces up Fig 3 NOTE At night the lights will automatically turn on At sunrise they will automatically turn off 4 Connect the light to the sensor by pushing the plug into the sensor socket until it is firmly seated Hand tighten the nut from the plug to the socket Fig 4 Socket from sensor 5 Connect the sensor to the transformer by pushing the plug into the transformer socket until it is firmly seated Hand tighten the nut from the plug to the socket Fig 5 Plug from sensor 6 Plug the transformer into a pr
5. operly grounded electrical outlet Fig 6 7 The last light in the set has a plug that can used to connect another set of lights Additional light sets can be purchased by calling 1 888 412 6001 Fig 7 Fig 7 TROUBLESHOOTING e f light fails to illuminate check that it is getting power by testing another appliance in the same power outlet e The light is designed to turn on when it gets dark and turn off when it gets light To activate the light during daylight hours cover the sensor e If light does not turn off during daytime check sensor Make sure the sensor faces up and is not covered by dirt or debris CARE AND MAINTENANCE e Periodically your light may require cleaning for optimal performance e Cleaning should only be done with warm soapy water Be sure to use biodegradable soap e The frequency of cleaning depends upon the conditions of the environment where the light is used REPLACEMENT PARTS LIST For replacement parts call our customer service department at 1 888 412 6001 8 a m 6 p m EST Monday Friday Part Description A Lights B Sensor C Transformer Printed in China LIMITED WARRANTY All pumps and electrical products are warranted to the user against defective material and workmanship under normal working conditions This warranty period begins on the date of purchase by the original purchaser All TotalPond electrical products are warranted to the user against defecti
6. ve material and workmanship under normal working conditions for 1 year from the date of purchase All TotalPond liners are warranted to the user against defective workmanship under normal working conditions for 20 years from the date of purchase All other TotalPond product is warranted to the user against defective material and workmanship under normal working conditions for 90 days Application Warranty covers only properly installed and maintained units Pump warranty is limited to applications pumping fresh water in a pond or fountain only Other liquid applications or extreme temperature uses must be approved in writing by the manufacturer Receipt and product date code are required for warranty claims Warranty Claim Warranty claims must be made by calling customer service at 1 888 412 6001 If the item is determined to be defective you will be given authorization to return the defective part s freight pre paid along with proof of purchase Disposition The manufacturer will make a good faith effort for prompt disposition regarding all warranty claims Returned product will be inspected to determine cause of failure before warranty is applied Warranty does not cover any costs associated with the shipping handling installation or removal of products or parts subject to this warranty For products damaged in transit a claim should be filed with the carrier Disclaimer Any oral statements made about the product by the seller
Download Pdf Manuals
Related Search