APEC Water Systems FILTER-SET-PH Use and Care Manual
Contents
1. Connect on Tank Ball Valve Cold Water Line y Drain Line PRE FILTRATION SEDIMENT Pure Water Holding Tank Drain Saddle APEC WATER i PemDanuamowane i z d All L Sample Drain Pipe E Copyright APEC Water Systems 2015 PH Plus Filter Replacement Guide The PH Plus FI PHPLUS QC filter should be replaced every 6 12 months Please follow the replacement steps below 1 Turn OFF cold water supply to RO system Turn OFF tank ball valve by turning the blue handle 90 degrees Litt up RO faucet lever briefly to relief the built up pressure inside the Ro system The will make removing the tubing easier 2 Remove the CLEAR outlet tubing at Point P See Fig 1 To remove the tubing Push In and hold down on the collet ring square against the fitting With the collet held in this position the tube can be removed Once the outlet tubing is disconnected please remove the inlet tubing at Point O Remove old filter and discard 3 The new PH Plus filter will come with 2 End Plugs Please remove the plugs before connecting the tubing to the filter 4 To reconnect the tubing to Point O and P push the tubing into the Quick Connect fitting then gently pull back on the tubing to make sure the connection was secure 5 Please drain a full tank of water before use p FI PHPLUS Ct R 4 CHLORINE TASTE amp ODOR REDUCTION 5 TCR QC 4 LEAK FREE CONSTRUCTION 45 MICRON NOMINAL FIL2. TRATION w 10 COCONUT SHELL CARBON FILTER W QUICK CONNECT MADE IN USA ow we FILMTEC MEMBRANES THIS SYSTEM CONTAINS THE WORLD S LEADING RO E lial a NSF lt gt l i q RO PH90 APEC WATER FREEDRINKINGWATER com REVERSEOSMOSIS TECHNOLOGY k PRE FILTRATION p PRE FILTRATION PRE FILTRATION CARBON 4 CARBON SEDIMENT Fig 1 Copyright APEC Water Systems 2015
3. Ultimate Ro PH90 Installation Addendum The steps for installing the RO PH90 is the same as the included manual Please follow the directions in the Installation Manual trom pages 1 13 When you get to Step 6 Connecting The System Summary of Tubing Connections Point H to Z in the manual page 13 please use this Addendum Point P to Z Connect product water trom 6th stage PH Plus filter output to Ro faucet Clear tubing The 5 stage carbon filter outflow point H will No longer connect to the faucet The 5 stage filter has been rerouted into the PH Plus filter as stage 6 For Step 5 point H under Details on Tubing Connections in the manual page 15 please tollow below 5 Point P Stage 6 PH Plus filtered water to faucet connection Tubing color Clear tubing Connect the CLEAR tubing from the faucet base stud to the PH filter s outflow end at Point P Flow gt arrow on the filter is the output to faucet at Point Z Fitting type Quick Connect Please remove End Plug first then simply push the Clear tubing into the QC fitting No Inserts Sleeves or Nuts are needed to secure the connection No Teflon tape needed here Please refer back to Step 6 on page 15 in the Owner s Manual to complete installation APEC RO PH90 SYSTEM SAMPLE CONNECTION See Manual for details on each connection a p Pure Water Output Faucet Sample i N Kitchen Faucet e m E E r i ips x p Feed Water
Download Pdf Manuals
Related Search