InvisaFlow 6210-25 Instructions / Assembly
Contents
1. gt Inside A Corner Outside B t Corner O At the end of the gutter cut the last gutter cover an extra 2 inches longer than the end of the gutter Cut a notch on the back edge of the gutter filter A and on the front edge B Bend the end section down to create the end cap Shingle End Cap For more information on the Solid Vinyl Gutter Cover other innovative products from InvisaFlow please visit www invisaflow com2. Vinyl Easy Installation Instructions CAUTION Wear safety glasses and leather gloves while installing this product Always exercise appropriate care when working from a ladder Follow all tool and ladder manufacturer s instructions and safety recommendations Tools amp Safety Equipment Needed Safety glasses leather gloves tin snips and a ladder Make sure you clean your gutters and downspouts before installation of the Vinyl Gutter Filter You should flush the entire gutter system with a hose making sure water is flowing freely from the bottom of the downspout without any water backing up in the gutter Using the Gutter Gettere cleaning scoop with flexible conforming tip to make cleaning easy Downspout Free flowing water from your downspout extension ap Re o_o ra isc SAS StealthFicy Low Profile Downspout Extension Fits standard 4 in 5 in and 6 in gutters B Before installing the first gutter filter notch the back edge A and the front edge B Next bend the end section down to create an end cap This will help prevent birds and other animals from nesting in the gutter Note Install with the filter mesh facing up Shingle B iInvisaFlow Innovative Drainage Product
3. s 3 Starting at one end of the gutter install the gutter filter by slightly lifting the shingles and sliding the gutter cover under the shingle If the starter row of shingles are fastened to the roof deck slide the guard between the layers Note Check your local building codes for any special installation requirements Pull the front edge forward to engage with the lip of the gutter Shingle mF As you install each section simply 5 overlap the end with the previous section to prevent gaps HHHH L Notched for over lapping For outside corners A or inside corners B mitre cut both adjoining sections Notch the front edge of one section to create an overlap
Download Pdf Manuals
Related Search