My Mold Detective MMD200 Instructions / Assembly
Contents
1. IMPORTANT TIP Do not take air samples if is raining To ensure accuracy indoor and outdoor samples should be taken within a 15 minute period of each other STEP 1 TAKE AIR AND SURFACE SAMPLES Greraccaseoy pack and remove air sample cassettes anc a3 For Air Sampling You will be taking one outdoor air sample used as a control or baseline and at least one indoor air sample a Mark one air sample cassette with 0 to represent the outdoor sample The outdoor sample location should be taken in an open and clear area that is 10 ft away from the structure and overhangs Once the outdoor sample location has been identified place the pump on a sturdy surface approximately 3 to 5 ft off the ground and ensure you have a power outlet fo plug in to an extension cord may be necessary Mark the remaining air sample cassette with the room location name to be sampled The indoor sample should be taken in the middle of the room and approximately 3 to 5 ft off the ground b Peel back the tape quality seal do NOT tear off on both the top and bottom of the air sample cassette marked O and press lid clasp on the pump to open the lid The lid will remain open while pump is in operation insert cassette on the air sample inlet tray secure firmly in place and push the green button on the front of the pump to start the air sampling process The pump will take a 5 minute air sample and turn off automatically 4 Reseal the2. le for regular hour Express service Use only one air sample cassette per room Do not reuse air sample cassettes Air sample cassettes should be used within 1 year of purchase Tape lift should be used within 2 years of purchase
3. tape on the top and bottom of the cassette after the test is complete Repeat the process for the indoor room sample For Surface Sampling 2 Identify the surface with suspect mold growth to take your surface sample Write the location name on the sample tape label b Peel off the cover slip to expose the tacky surface of the tape c Press the tacky surface onto the surface you want to sample Close the tape onto the white backer For accurate results only take one surface sample per tape lft STEP 2 REGISTER ONLINE Once you have taken air and surface samples log on to www MyMoldDetective com to complete registration iysis will be completed until registration and Click the Register Samples button at the top of the home page and follow the instructions Finalize the registration process by paying for the lab analysis Make sure to write the confirmation number on the front of the prepaid self addressed envelope STEP 3 MAIL SAMPLES Insert air sample cassettes and tape lift into the prepaid self addressed envelope For standard defivery simply mail via USPS For Express delivery you can overnight using the same address on the self addressed envelope Mail to My Mold Detective LLC Attention Aerobiology Laboratory Associates Inc 43760 Trade Center Place Suite 100 Dulles VA 20166 9803 n be achieved within 48 hours by chensin he Express iss Addi rocessing per samp
Download Pdf Manuals
Related Search