Wagner 0529002 Installation Guide
Contents
1. Before you begin NEVER point the spray gun at any part of the body To Assemble IMPORTANT Make sure the power cord is unplugged 1 Insert the suction tube into the intake opening 2 Align the suction tube a If you are going to be spraying in a downward direction the angled end of the suction tube should be pointing toward the front of the gun b If you are going to be spraying in an upward direction the angled end of the suction tube should be pointing toward the rear of the gun Note Make sure the suction tube is inserted as far as it will go to ensure a tight fit IMPORTANT Never tip the sprayer at more than a 45 angle Material could get into the turbine and damage the sprayer 3 Carefully screw the cup back onto the spray gun assembly Tighten firmly 4 Align the arrow on the spray gun with the unlock symbol on the turbine 5 Insert and twist the spray gun into the turbine toward the lock symbol on the turbine The tab below the trigger will lock the two pieces into place IMPORTANT If the unit has already been used make sure the nozzle seal is in place see pages 11 12 6 Wagner Spray Tech All Rights Reserved
Download Pdf Manuals
Related Search