Builders Edge 050021400117 Installation Guide
Contents
1. Shutter Arch Top Installation Instructions For Raised Panel and Louvered Shutters Step 1 Attach the Arch Top to the shutter by using the clips provided Align the shutter and the Arch Top on a flat surface Join them together by pushing each clip on as far as it will go Use 2 clips per Arch Top See Figure 1 at right for clip placement Transom Clip Installation If installing a Quarter Round Panel Arch Top a Transom Clip will also need to be installed in addition to the 2 clips Start by pushing one end of the Transom Clip onto the shutter clamping the shutter to the arch top Work the Transom Clip down until the entire clip is fastened to the shutter Be sure the Transom Clip is pushed on as far as it will go See Figure 1 at right Note Some shutters contain support ribs at the top This will need to be removed using a pair of cutters to allow the Transom Clip to be pushed into place Step 2 Fasten the shutter to the wall using the instructions supplied with the shutter Step 3 Fastening the arch top to the wall is just like fastening the shutter With the shutter in location against the wall drill through the Arch Top and wall a total of 3 1 4 with a 1 4 drill bit See Figure 2 at right for proper Shutter Lok location Step 4 Grasp the Shutter Lok by supporting the shank and push it through the shutter hole and into the wall surface Tap the Shutter Lok gently with a hammer to snug the shutter against th2. e siding Do not over tighten or this will cause the shutter to dimple NOTE Only the Quarter Round Panel Arch Top contains the Transom Clips need to be removed Fig 1 back of assembly Fig 2 front of assembly Transom Clip Arch Top Shutter
Download Pdf Manuals
Related Search