Builders Edge 051010001002 Installation Guide
Contents
1. Shutter Hardware Installation Instructions For new or existing shutters Louver Panel or Board and Batten Kit Contains 4 Hinges 2 S Hooks 10 Screws Hinge Installation Step 1 Determine where the hinges will be installed Typically the hinges are installed near the ends of the shutters See Figure at right Note If placing hinges over Shutter Loks be sure the pilot holes don t interfere with the Shutter Loks Step 2 Using the marks on the front of the hinges as guides use an 1 8 drill bit and drill pilot holes through the hinge and shutter Step 3 Securely attach the hinges to the shutter with the enclosed screws S Hook Installation Step 1 Place the S Hook in the desired location Normally the hooks are installed at the bottom corner of the shutter See Figure 1 at right Step 2 On the back of the S Hook is a fin This is where the screw will be placed After the position of the S Hook is determined use an 1 8 drill bit to drill through the fin and into the bottom of the shutter Step 3 Securely attach the S Hook to the shutter using the screws provided
Download Pdf Manuals
Related Search