Zenoah EBZ8000 User's Manual
Contents
1. and be careful not to point the nozzle in the direction of people or animals While spraying please be careful of the wind direc tion and always stand on the upwind side to avoid spraying yourself with chemicals Should you begin to feel even slightly unwell while spraying consult a doctor im mediately When doing so inform the doctor of the name of the chemical you were using the conditions of use etc If the sprayer is tilted the chemical may leak out through the air holes in the cap When spraying al ways make sure you have a firm footing and main tain your balance Do not touch the spark plugs or plug cords while the engine is running as you may get an electric shock N J Do not touch the muffler spark plugs or other metal parts with your bare hands while the engine is run ning or immediately after stopping the engine as there is the risk of burns due to high temperatures PRECAUTIONS AFTER SPRAYING Please seal unused chemicals and store them out of the reach of children Do not simply discard empty chemical containers but dispose of them safely by incinerating burying or another similar method In addition please take every care that the water used to clean spraying tools does not create any hazard Fully inspect and maintain protective clothing masks gloves and other protective gear in preparation for the next session After completing the work and tidying away chemi cals and spraying tools2. THEIR APPEARANCE THERE ARE NO OTHER EXPRESS WARRANTIES IMPLIED WARRANTIES INCLUDING THOSE OF MER CHANTABILITY AND FITNESS FOR A PARTICULAR PUR POSE ARE LIMITED TO TWO 2 YEARS OF HOME USE ONE 1 YEAR FOR ANY OTHER USE FROM THE ORIGI NAL DELIVERY DATE LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL DAMAGE UNDER ANY AND ALL WARRANTIES ARE EXCLUDED IF YOU NEED TO OBTAIN MORE INFORMATION PLEASE CALL YOUR NEAREST SERVICE CENTER OR CHECK PLEASE ZENOAH WEB SITE htto Awww zenoah net
3. from time to time e When selling or lending this product it should be ac companied by this Operator s Manual Mist Kit for EBZ8000 EBZ8001 PRECAUTIONS BEFORE SPRAYING e Make sure you have the correct protective clothing headgear rubber gloves and boots a protective mask goggles a towel protective cream etc to prevent chemicals from coming into contact with your skin or entering your lungs When spraying please wear this protective gear to prevent any risk of injury Protective headgear Protective goggles Protective mask Rubber boots Ear muffs Neck covering Protective clothing Rubber gloves Protective clothing OMNOAORWNM e Please store chemicals in a locked storage box locker or other safe place out of the reach of chil dren e Carefully read the instructions for using the chemi cals and familiarize yourself with the level of toxicity method of use etc e Please pay all due consideration to the area in which you will be spraying to ensure that you do not pol lute the water supply rivers lakes ponds etc or cause any damage to residents passers by live stock etc e Prepare yourself physically on the day before spray ing by for example cutting down on alcoholic bever ages or late night work e Do not allow children animals etc to enter the chemical spraying area e Before spraying please prepare fully by inspecting sprayer nozzles and checking for abnorm
4. starting the engine e After refueling seal the fuel container tightly close the fuel tank cap and start the engine at least 3 meters away PRECAUTIONS WHEN REFILLING CHEMCALS e Before filling the tank with chemicals please make sure that the intermediate valve is closed e After chemical refilling firmly tighten the tank cap If not fully tightened the cap may become loose dur ing spraying with the risk of physical exposure to the chemicals 1 OPEN 2 CLOSE e Do not fill chemicals over 14 liters e Do not mix different chemicals e Wash the chemical fluid tank and the nozzle cleanly when you change the type of chemical PRECAUTION WHEN STARTING THE ENGINE e Please keep children animals etc well away when starting the engine and spraying PRECAUTIONS WHEN SPRAYING e Since protective clothing generally offers poor venti lation and thus places stress on the body there is a risk of contracting heatstroke or other illness when operating for long periods under high temperatures Please avoid spraying on hot days aiming instead for early morning and late afternoon times when tem GB 4 peratures are relatively cool and winds are low When starting work please pay all due consideration to the spraying time wind direction etc to ensure that no noise disturbance or chemical hazard is caused to nearby residents passers by farm crops and so on While spraying please hold the grip firmly at all times
5. you should immediately take a bath or wash your hands feet face etc thoroughly with soap as well as washing your mouth out You should change all clothes worn including un derwear and wash them thoroughly Clothes worn during spraying should not be worn again the follow ing day After spraying please limit your alcohol intake and A 3 For safe operation rest thoroughly by going to bed early If you feel even slightly unwell please see a doctor as soon as possible OTHER PRECAUTIONS e When engaged in spraying work over a protracted period of time please have your health checked regu larly e Please carry out spraying in a planned fashion keep ing a daily record of the date and time of spraying the chemicals used the target pest contents of the work duration of the work and other details e Please keep the following points in mind when se lecting or using protective gear a Protective clothing Choose clothing that is cool to wear and offers good ventilation and waterproofing In addition wear items that enable you to carry out spraying work in total comfort and safety b Spraying hood Use a hood with a brim that is waterproof and covers your neck and shoulders c Gloves Use gloves that are difficult for chemicals to penetrate and do not slip even if you perspire while doing the work d Rubber apron When mixing chemicals wear a long thick and wide apron that cannot be penetrated by chemical splash
6. 848L8293A1 708 zenorr OWNER S MANUAL MIST KIT FOR BLOWERS A WARNING A Before using our products please read this manual carefully to understand the proper use of your unit Mist Kit for EBZ8000 EBZ8001 A SAFETY FIRST Instructions contained in warnings within this manual marked with a A symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury and for this reason you are requested to read all such instructions carefully and follow them without fail WARNINGS IN THE MANUAL A WARNING This mark indicates instructions which must be followed in or der to prevent accidents which could lead to serious bodily in jury or death IMPORTANT This mark indicates instructions which must be followed or it leads to mechanical failure breakdown or damage EX NOTE This mark indicates hints or directions useful in the use of the product 1 Specification This data is when the Mist Kit is mounted on EBZ8000 Never attach this mist kit to other than appli cable models Failure to do so may void your warranty APPLICABLE MODEL EBZ8000 EBZ8001 Contents 1 Specifications Warning labels on the machine For safe operation Set up Operation Maintenance Storage Disposal AaNOaR WN EBZ8001 Model Mist Kit for EBZ8000 EBZ8001 Specifications are subject to change without notice Purpose
7. ANTED FOR THE WARRANTY PE RIOD ANY WARRANTED PART WHICH IS SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE SHALL BE WARRANTED FOR THE PERIOD OF TIME UP TO THE FIRST SCHEDULED REPLACEMENT POINT FOR THE PART ANY REPLACEMENT PART THAT IS EQUIVALENT IN PER FORMANCE AND DULABILITY MAY BE USED IN NON GB 8 5 Remove the spark plug and put a few drops 1 2 cc of 2 cycle oil inside the engine After pulling the starter rope 2 or 3 times return the spark plugs to their origi nal position and stop in compressed position 6 After oiling the throttle lever and other metal parts with anti corrosive oil cover the sprayer and store indoors in a low humidity location When disposing your machine fuel or oil for the machine be sure to allow your local regulations WARRANTY MAINTENANCE OR REPAIRS AND SHALL NOT REDUCE THE WARRANTY OBLIGATION OF THE COMPANY THE COMPANY IS LIABLE FOR DAMAGES TO OTHER ENGINE COMPONENTS CAUSED BY THE FAIRURE OF A WARRANTED PARTS STILL UNDER WARRANTY THE WARRANTY DOES NOT APPLY TO THOSE UNITS WHICH HAVE BEEN DAMAGED BY NEGLIGENCE OF IN STRUCTION LISTED IN THE OWNER OPERATOR MANUAL FOR PROPER USE AND MAINTENANCE OF THE UNITS ACCIDENT MISHANDLING ALTERATION ABUSE IM PROPER LUBRICATION USE OF ANY PARTS OR ACCES SARIES OTHER THAN THOSE SPECIFIED BY THE COM PANY OR OTHER CAUSES BEYOND THE COMPANY S CONTROL THIS WARRANTY DOES NOT COVER THOSE PARTS RE PLACED BY NORMAL WEAR OR HARMLESS CHANGES IN
8. Spraying agricultural chemicals and cold water for pest control weeding and growth control Capacity of chemical fluid tank liters 14 Pump Longitudinal coverage Horizontal m 22 Vertical m 14 Maximum water absorption liters min 55 2 Warning labels on the machine Read owner s manual before operat ing this machine If warning label peels off or becomes soiled and impossible to read you should contact the dealer from which you purchased the product to order new labels and affix them in the required location s Wear head eye and ear protection Never modify your machine We won t warrant the machine if you use the remodeled blower or if you don t observe the proper usage written in the manual Warning Attention Keep all children bystanders and helpers 15 meters away from the machine GB 2 A 3 For safe operation Before using this product please read this Operator s Manual thoroughly to ensure correct operation The fol lowing are precautions that should be observed in order to use the product smoothly Elsewhere in the Manual the A warning mark is used to bring your attention to these precautions BEFORE USING THE PRODUCT e This product has been designed mainly for the pur pose of spraying pest control chemicals and weedkillers Please do not use it for any other pur pose as this may cause unforeseen accidents e Since this product uses agricultural chemicals th
9. alities such as loose screws or spray hose connections fuel leaks defective or broken fluid gaskets or damage to the carrying band PRECAUTIONS WHEN TRANSPORTING CHEMCALS e When transporting chemicals please handle with care to ensure that there is no spillage of chemicals from torn bags broken bottles or loose stoppers e Do not carry chemicals in the same container as food PRECAUTIONS WHEN TRANSPORTING THE SPRAYER e Do not transport the sprayer while it has chemicals or fuel in the tank as these could leak out as a result GB 3 Mist Kit for EBZ8000 EBZ8001 A 3 For safe operation of impact during transportation e When transporting in a vehicle please use a rope or similar to fix the sprayer firmly to the cargo trailer in an upright position Please do not transport by bi cycle or motorbike as this is dangerous PRECAUTIONS CONCERNING FUEL e The engine of this product is fueled by mixed gaso line that includes highly combustible fuel Do not refuel or store fuel containers where there is any risk of combustion from incinerators burners bonfires kitchen stoves electric sparks welding sparks etc e Smoking while spraying or refueling is dangerous Please avoid this at all costs e When refueling during use always stop the engine and make sure there are no naked flames in the vi cinity before refilling e Any fuel spilt during refueling should be wiped off completely with a rag or similar before
10. at require careful operation misuse can be dangerous Do not use this product when tired or otherwise in poor physical condition or when you may be unable to judge correctly or operate accurately such as af ter taking cold relief medicines or drinking alcohol Also children or persons who are unable to under stand the contents of this Manual should under no circumstances be permitted to use the product e The engine exhaust gas contains toxic carbon mon oxide Please do not use the product indoors in vinyl houses or tunnels or in other poorly ventilated places e Do not use this product in the following cases 1 When the product could fall over or in other situa tions when it is difficult to hold or operate 2 After sunset or at other times when eyesight is poor and the safety of the spraying area is difficult to as certain 3 In worsening weather rain fog strong wind light ning etc e When using for the first time before commencing actual spraying please receive guidance in operat ng the product from a person with adequate experi ence e Fatigue reduces powers of concentration and in creases the risk of accidents When planning work please allow ample time setting a limit of 30 40 minutes for single spraying sessions and breaks of 10 20 minutes in between Also do not spray for more than 2 hours in any one day e Please take good care of this Operator s Manual and refer to it for additional information
11. es e Protective goggles mask etc Select suitable protective goggles mask rubber boots eye washer and protective cream etc pay ing attention to standards and the recommendations of farm work safety promotion organizations MAINTENANCE PRECAUTIONS e In order to maintain the functions of the product regu larly carry out the maintenance inspections listed in this Manual When maintenance or parts replacement not indicated in this Manual are required please con sult your product supplier or nearest ZENOAH prod uct dealer e Never keep the engine running while carrying out inspections or maintenance e Do not modify the sprayer or dismantle the engine This could lead to breakdown and serious accidents during operation e Do not touch the muffler or spark plugs with your bare hands immediately after stopping the engine There is the risk of burns due to high temperature e For replacement parts please use original ZENOAH Mist Kit for EBZ8000 EBZ8001 parts or brands designated by ZENOAH MAINTENANCE OF LABELS I 2 3 Please keep warning labels clean and unmarked If warning labels become soiled or peel off please order from your supplier and replace with new ones When affixing new labels please wipe off all dirt and moisture GB 5 Mist Kit for EBZ8000 EBZ8001 4 Set up COMPONENTS pcs A Tank Ass y 05 1 B Valve Ass y 0 1 C Mist Nozzle A
12. ring B 4 gt A A Pulled out position Long distance narrow angle spray B Pushed In position Short distance wide angle spray 3 Start the engine and carry the unit on your back 4 While holding the swivel joint in your right hand move the throttle lever upward and turn the intermediate valve to the open position 5 After spraying work has finished close the intermedi ate valve and stop the engine e Before the solution spraying work supply water into the tank and operate the mister to make sure that there is any leakage or any mechanical failure e Repair it if there is any leakage or failure before the solution spraying work Mist Kit for EBZ8000 EBZ8001 Discharge rate Valve travel lit min 1 1 0 2 2 1 3 3 8 4 5 5 Max Longitudinal coverage Horizontal direction 22m Vertical direction 14m 6 Maintenance Make sure that the engine has stopped and is cool before performing any service to the blower Contact with rotating blower fan or hot muffler may result in a personal injury e Use only ZENOAH replacement parts Failure to do so may Cause poor performance possible injury and may void your warranty e Inspect unit before each use for loose fasteners leaks etc Replace damaged parts GB 7 Mist Kit for EBZ8000 EBZ8001 7 Storage On completion of all work procedures when not plan ning to use again for a protracted period please carry out the following pre
13. ss y 1 D Frame 1 E Plat sissien 1 FY Plate ceini 2 G Plate 2 H Spacer ee 1 Cl Pipe iea d J Screw 5 x 14 4 K Screw 5 x 20 2 L Screw 5 x 25 0 6 M Tube 1 CNY Clip aii 4 A O Clamp cereos 1 D ASSEMBLY 5 Set the tank A as shown in the picture and fasten it 1 Remove the back pad from the back plate with the plate E 2 plates F and 4 screws J 6 Connect the tube M to the volute and tank A and fasten it with 2 clips N A Back plate N Back pad 2 Fit frame D in the groove of the back plate and fas ten it with 2 plates G and 6 screws L 3 Fasten the spacer H with 2 screws K 4 Replace the back pad GB 6 7 Connect the mist nozzle ass y C with the pipe l 8 Connect the valve ass y B to the tank A and mist nozzle ass y C and fix them with 2 clips N TIGHTENING TORQUE 3 5 0 5 N m 5 Operation HOW TO USE 1 Pour the solution into the tank with the intermediate valve closed e Do not fill chemicals over 14 liters e Do not mix different chemicals 2 Adjust the solution flow and the spray range accord ing to work conditions The solution flow is changed by shifting the number on the top of the valve at the mist nozzle The figure shows 5 5 lit min position The spray range is changed by shifting the bell posi tion after loosening the lock
14. storage care to prevent trouble caused by time lapse changes 1 Clean the chemical fluid tank and nozzle 2 Remove dirt from the sprayer inspect it for any dam age or looseness and if any abnormality is found correct it thoroughly in preparation for the next time you use the unit 3 Drain the fuel tank 4 Start the engine and leave it in idling condition until all the fuel inside the carburetor is spent and the en gine comes to a natural stop Limited warranty Should any failure occur on the product under normal oper ating conditions within the applicable warranty period the failed part will be replaced or repaired free of charge by a ZENOAH authorized dealer WARRANTY PERIOD 1 year 6 months if used profession ally and 30 days if used for rental purpose from the date of initial purchase THE PURCHASER SHALL BEAR COSTS OF TRANS PORTING THE UNIT TO AND FROM THE ZENOAH DEALER THE PURCHASER SHALL NOT BE CHARGED FOR DIAG NOSTIC LABOR WHICH LEADS TO THE DETERMINATION THAT A WARRANTED PART IS DEFECTIVE IF THE DIAG NOSTIC WORK IS PERFORMED AT THE ZENOAH DEALER THE PURCHASER OR OWNER IS RESPONSIBLE FOR THE PERFORMANCE OF THE REQUIRED MAINTENANCE AS DEFINED BY THE MANUFACTURER IN THE OWNER OP ERATOR MANUAL ANY WARRANTED PART WHICH IS NOT SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE OR WHICH IS SCHEDULED ONLY FOR REGULAR INSPECTION TO THE EFFECT OF REPAIR OR REPLACE AS NECES SARY SHALL BE WARR
Download Pdf Manuals
Related Search