Westinghouse sk-32h540s User's Manual
Contents
1. a 19 19 BASIC OPERATION 20 1 TURNING THE POWER ON AND 20 2 ADJUSTING THE VOLUME dans ame 20 3 CHANGING CHANNELS 21 4 SELECTING THE INPUT SOURCE 21 5 ADJUSTING THE DISPLAY 22 6 ADJUSTING THE LCD 22 SETUP MENUS 23 1 SETUP MENU 23 2 MENU SETTING SCREENS aana naana akanan 24 SPECIFICATIONS 52 TROUBLESHOOTING 53 APPENDIX A LCD TV BASE REMOVAL 54 1 ANTI TIPPING 55 2 ANTI THEFT PROTECTION lt 55 APPENDIX B SAFETY BRACKETS 55 APPENDIX C WALL MOUNT OPTION 56 IMPORTANT INFO2. 1 ANTI TIPPING MECHANISM You can use the safety brackets to anchor the LCD TV in place by looping a security cable through the brackets and securing it to a surface that is strong enough to support the weight of the unit Using the safety brackets in this manner does not preclude the use of the LCD TV base The safety brackets must be used in conjunction with the unit base The brackets are only to be used as an additional safety option 2 ANTI THEFT PROTECTION The safety brackets can also be used to protect the LCD TV from unwanted theft by ooping a security cable through the brackets and bolting it to an immovable surface 55 APPENDIX C WALL MOUNT OPTION The LCD TV has been fitted with VESA FPMPMI compliant mounting holes These 200 x 200 mm mounting holes allow the unit to be mounted on a wall IMPORTANT Remove the LCD TV base first before mounting the unit on a wall Go to page 54 for related instructions It is the user s responsibility to use a UL listed wall mount unit rated to support the weight of this LCD TV Please consult qualified contractors for wall mount installation The incomplete or improper mounting of this unit to a wall may cause it to fall down resulting to property damage and or potentially serious injury 56
3. Custom Label puon rrererem FW Vers pan Reset Captions Reset All 35 SETUP MENUS D 1 1 Closed Caption Use this sub menu to enable or disable closed captioning in TV programs Press C9 to cycle between the OFF and ON settings Basic Selection Advanced Selection Advanced Appearance Caption Preference Reset Captions D 1 2 Basic Selection Use this sub menu to select the preferred closed captioning content Most closed caption content can be found within the CC1 setting Hasic Selection Advanced Selection Appearance Caption Preference Reset Captions 36 SETUP MENUS D 1 3 Advanced Selection Use this sub menu to select enhanced closed captioning content gt NOTE This sub menu is only available for digital TV programming The availability is dependent on your digital TV provider and may vary Basic Selection Advanced Selection across channels and TV programs Advanced Appearance Preference Reset Captions D 1 4 Advanced Appearance Use this sub menu to customized the way closed captions are displayed Closed Captions Advanced Appearance Basic Selection smell Advanced Selection As Broadcast Hone cond As Broadcast Solid As Breadcasel E dir Advanced Appearance Caption Freference Reset Captions 4 1 Use the lt P A V keys to select a CC aspect 2 Pre
4. Picture can be displayed only when a 640 x 480 480P 720P or 1080i signal is received When you connect to the HDMI terminal with a DVI HDMI conversion cable there is a possibility that the picture may not display correctly Audio output You can output audio signals from the LCD TV set through the analog audio out and SPDIF terminals This TV does not support DTS audio format You may not hear proper audio output from the TV speakers if you choose a DTS audio format 18 INSTALLATION 5 POWER CONNECTION Connect the power cord to the LCD TV then to a proper AC outlet IMPORTANT The LCD TV works on a 120 VAC 60 Hz power input voltage ONLY Turn off all connected devices before plugging in the power cord 6 INITIAL SETUP Press D on the control panel or on the remote control to turn on the LCD TV When you turn on the LCD TV for the first time you will be prompted to perform a channel scan Use the A V keys to select a channel source and then press C Channel Scan Because there is no channel in list after doing reset all You must eG m do an auto channel scan mm Choose scan type N right side and start the Do It later scan eo Power Buttom Cm Power 19 BASIC OPERATIONS 1 TURNING THE POWER ON AND OFF Power on Blue light Standby mode DPMS on Amber light Power off No light gt NOTE For more information on power mode configurati
5. breaking of internal circuit F ype connector 75 ohm coaxial cable 15 INSTALLATION Cable TV CTV DTV Connection The unit has a TV tuner 75 ohm coaxial cable connector located on the right I O panel for for easy cable hookup When connecting the 75 ohm coaxial cable to the unit screw the 75 ohm cable to the TV tuner Some cable TV companies offer premium pay channels Since the signals of these channels are scrambled a cable TV converter descrambler is usually provided to the subscriber by the cable TV company This converter descrambler is necessary for normal viewing of the scrambled channels Set your TV to channel 3 or 4 Typically one of these channels is used If a channel is unknown consult your cable TV company For more specific instructions on installing cable TV consult your cable TV company One possible method of utilizing the converter descrambler provided by your cable TV company is explained below A position on the RF switch not supplied You can view all unscrambled channels by using the TV s channel keys B position on the RF switch not supplied You can view the scrambled channels via the converter descrambler by using the converter s channel keys RF switch not supplied Cable TV line Cable TV converter descrambler not supplied 16 INSTALLATION 4 EXTERNAL DEVICE CONNECTIONS You can enjoy picture and sound by connecting various audio video devices to the terminals
6. hold down the button for the last digit To select a standard channel Complete the following steps within 4 seconds You can enter a single double or triple digit channel number 7 12 012 etc 1 Key in the channel number using the O thru 9 buttons 2 Press ENT To select a digital channel Complete the following steps within 4 seconds 1 Key in the main channel number using the O thru 9 buttons 2 Press e 3 Key in the sub channel number using the O thru 9 buttons 4 Press ENT 4 SELECTING THE INPUT SOURCE There are two ways to select the video input source Using the Individual Input Keys Press any of the following remote control keys to change the input source YPbPr1 PC HDMI TV or Video 7 Pc HDMI eo The YPbPr2 S Video and DVI input keys are non functional in this LCD 7 Vidos TV model 21 BASIC OPERATIONS Using the Input Key T 1 Press Input 2 Press A Y to select the preferred source 3 Press C to switch to the selected input source gt NOTE If you enabled the Autosource function the TV will automatically detect and switch to a new input connection e g The TV will automatically switch to PC mode when you connect to a computer Go to page 41 for instructions on how to enable this function 5 ADJUSTING THE DISPLAY FORMAT The input source can sometimes affect the way images are displayed on screen You can adjust the display format
7. place anything on the LCD TV that can cause liquid to splash on it e g flower vase Do not place heavy objects on the LCD TV audio video cables or power cord If the LCD TV emits smoke abnormal noise or a strange odor immediately turn it off and contact the Westinghouse Service Center by logging on to www wde com contacting the Westinghouse Customer Service at 866 287 5555 e mailing us at service wde com Dolby Digital Notice DIGITAL Manufactured under license from Dolby Laboratories Dolby and the double D symbol are registered trademarks of Dolby Laboratories Fabriqu sous licence de Dolby Laboratories Dolby et le symbole du double D sont des marques de commerces de Dolby Laboratories IMPORTANT INFORMATION 4 ANTENNA INSTALLATION SAFETY Outdoor Antenna Grounding If an outside antenna or cable system is connected to the LCD TV be sure the antenna or cable system is grounded to prevent voltage surges and built up static charges Article 810 of the National Electrical Code ANS NFPA 70 provides information on proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode Antenna Grounding According to the National Electrical Code ANSI NFPA 70 Antenna lead in wire Ground clamps Antenna discharge unit Section 810 20 pes conduct
8. to 9096 non condensing Ta 3596 Storage Conditions 20 to 60 C humidity 35 96 10 to 9096 non condensing Altitude 0 to 12 000 m Physical Specifications Dimensions With base 798 x 200 x 608 mm W x Dx H Without base 798 x 180 x 556 mm Weight net With base 14 51 kg Without base 13 1 kg Regulations UL C UL and FCC B gt NOTES These product specifications are subject to change without user notification Do not set your computer graphics card to exceed the unit s refresh rates doing so may cause damage to the HDTV 52 TROUBLESHOOTING No power Make sure the power indicator is illuminated blue Make sure the power cord is securely connected to the AC in jack and is plugged into a functional AC outlet You may want to plug in another electrical device to the power outlet to verify that it is supplying the proper voltage Power is suddenly turned off Press and select Settings Sleep Timer to make sure the Leave TV On option is selected Forgotten PIN 1 Press and select Settings Reset All and then Yes 2 Access the setup screen again and select Locks 3 Key in and reconfirm your new PIN Remote control does not work Press only one button at a time Make sure the batteries are properly inserted The batteries may already be drained out Replace batteries with new ones Remote control code cannot Purchase a separate learning remote control be detected by a universal Go to w
9. to view the image properly 1 Press 2 Press A Y to select the preferred display format Options include Standard Picture is displayed in its original size Fill Picture is displayed to cover the entire screen Overscan Picture is caled down to fit the display area 3 Press C to apply the new display format 6 ADJUSTING THE LCD BACKLIGHT Different viewing conditions can affect the quality of the display You can adjust the LCD backlight to suit the current way you cC CD 1 Press ale E 2 Press A V to adjust the backlight to your preferred level Favorite 22 SETUP MENUS 1 SETUP MENU OPERATION Use the setup menus to configure the various operational settings of the LCD TV To display the setup menu screen Press on the remote control or MENU on the control panel To navigate through the setup menu screen Use the buttons on the remote control or on the control panel to navigate through the menu screens oTo e Select and display a primary menu lt gt y Enter INPUT Adjust sub menu options expressed in levels e g brightness level volume level Select and display a sub menu A Y Enter VOL INPUT Select a menu or a sub menu option Return to the primary menu tab from 4 or INPUT sub menu screen Return to the previous screen Apply the selected menu setting or INPUT cycle th
10. watched esel 31 SETUP MENUS B 8 TV Speaker Use this sub menu to toggle the LCD TV speakers on and off Press C to cycle between options B 9 Reset H E LL LT L rie CE Dngital Audio STET Al FICIETT p m HH Repel Select Yes on this sub menu to reset all Audio related settings Hass Aana booty Audio Audio ull A 1 or 32 SETUP MENUS C CHANNELS Use the Channel sub menus to view the channel list and to scan for available TV channels in your area Channels settings gt NOTES Antenna Scan Make sure the antenna is properly connected to the LCD TV tuner Cable Scan before you access this menu If a system PIN has been set up you will be prompted to key it in before you can perform an antenna or cable scan C 1 Channel List Use this sub menu to view the list of all available TV channels saved in the unit s memory Master Channel List Cable Scan Digital Only You can choose to enable disable all available channels or to enable the digital ones only Use the lt gt keys to select one of the options select Done and then press 33 SETUP MENUS C 2 Antenna Scan Select Yes on this sub menu to scan for available over the air and digital channels in your area Channel Lisi r MI FE E Antenna Scan Ari anleni
11. 4 digit PIN Enter FIN Change PIN You will be prompted to key in this PIN everytime you try to Recet Locks access the Locks menu and the Settings Reset All sub menu E 1 Ratings Locks Use this sub menu to set allowable video content for TV programs using the TV tuner based on their rating levels This will allow users parental control on the kind of TV programs their kids can access gt NOTE Patinas Locke Block Umated Shows This sub menu is only valid for the OFF North American market Change PIN USA Reset Locks 45 SETUP MENUS E 1 1 Block Unrated Shows Use this sub menu to block viewing of all unrated TV programs Block Umated Shows OFF USA E 1 2 USA Use this sub menu to select the rating levels based on US ratings of allowable TV programs and movies Block Umated Shows OFF USA 46 SETUP MENUS E 1 2 1 USA TV Use this sub menu to select the ratings of allowable TV programs These ratings are determined by the Federal Communications Commision FCC USA Mowe 1 Use the 4 5 A V keys to select a rating box 2 Press C to block TV programs rated as such 3 Select Done and then press C NEN NENNEN __ O S O Suitable for mature audiences only may be unsuitable for children under 17 F Fantasy violence combative situations Suggestive dialogue Coarse language Sexual situations V L S V gt NOTE Selecting a lower age bas
12. CD TV to turn off automatically 7 Backlight Adjust the LCD screen backlight 9 Channel keys Key in the channel number Go to page 20 for instructions on how to change channels using these keys D 11 Input Select the video input source Go to page 20 for instructions on how to use this key BO e ie em 13 Aspect Ratio Select the video display format 3 Options include Standard Fill and Overscan Go to page 21 for a description of these options P 2 9 2 Vidoe s video o 10 Vidoe s video 15 Return 9 23 Video 27 Enter 11 SYSTEM TOUR Switch to the previous channel Display the input source or channel information Enable TV or HDTV as the input source Function not available for this model Enable Composite 1 or Composite 2 as the input source Enable VGA as the input source Execute a command INSTALLATION 1 LCD TV BASE 1 Open the LCD TV carton box 2 Remove the LCD TV base from the carton box 3 Remove the two top carton stabilizers from the LCD TV 4 Remove the protective plastic covering the LCD TV 5 Grasp the two sides of the LCD TV and then pull it out of the carton box 6 Remove the two bottom carton stabilizers from the LCD TV 7 Lay the LCD TV on a clear flat and stable surface 8 Remove the plas
13. Only one of the speaker channels is used to broadcast audio signals single stream Stereo Both speaker channels are used to broadcast audio signals L R streams SAP SAP Second Audio Program enables audio signals to be broadcasted in a second language B 5 Digital Audio Use this sub menu to select the preferred language track for viewing digital TV programs Available language options will depend on your digital TV provider Lass L pni n Irack Irack1 Dngital Audio SPI T IN Speake or Wesel 30 SETUP MENUS B 6 SPDIF Use this sub menu to select the preferred audio format for SPDIF audio signals Hasy gt NOTE Tir bi le SPDIF is only available when watching DVDs or digital TV Li ni Press C to cycle between options i L Fund Cital Audio SFU L Surround audio format Stereo audio format Lorie I Spe on it Ji B 7 Level Set Use this sub menu to select the target inputs to apply the audio settings to Lass TOU Ha L nii ii bon Press C to cycle between options OFF Audio settings will be retained for all input sources as well as for both analog and digital TV channels Chital Audio SPI T FICIETT IV on ON Audio settings will be only applied to the input source TV signal currently being
14. RMATION 1 WARNINGS The lightning flash with arrowhead inside an equilateral triangle symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock The exclamation inside an equilateral triangle symbol is intended to alert the user to related operating and maintenance instructions in the user documentation accompanying the product IMPORTANT INFORMATION 2 SAFETY GUIDELINES WARNING This device must be operated with the original power supply CAUTION The power supply outlet should be located near the LCD TV and should be easily accessible Always use the appropriate AC cord that is certified for your specific country Some examples are listed below 5 UL CSA Japan Electric Appliance Control Act IMPORTANT NOTICES CONCERNING POWER CORD SELECTION The specific power cord for this LCD TV is enclosed and has been selected according to the country of destination Use the enclosed power cord to prevent electric shock Observe the following guidelines if it is necessary to replace the original cord set or if there is no cord set enclosed The female receptacle of the cord set must meet IEC 60320 requirements and should look like Figure A1 below Figure 1 s s Figure A2 My For the United States and Canada In the United States and Canada
15. Ww Westinghouse USER S MANUAL MANUEL DE L UTILISATEUR MANUAL DEL USUARIO SK 32H540S Widescreen HDTV TVHD a Ecran G ant TVHD Pantalla Grande TABLE OF CONTENTS IMPORTANT INFORMATION 2 SAFETY NUES 3 IMPORTANT SAFETY nen nana 4 ANTENNA INSTALLATION a 5 CLEANING THE LCD 2 nada SYSTEM TOUR 1 PACKAGE 2 2 a ERE FE EF M ERE FEDERE 2 E OEA ESEAS c IN 9 4 REMOTE CONTROL wir ec 10 INSTALLATION 12 WC TV BASE 6 12 2 REMOTE CONTROL 14 3 ANTENNA 15 4 EXTERNAL DEVICE 17 5 POWER CONNECTION
16. e version and the current input source A Time Menu Language Mie amp Time Poser Hae Sito TV Version PICIE F W verslon V1 01 024 DVD TVMicron verslon M1 37 AL PMon verslon 1 13 43 SETUP MENUS D 10 Reset All Select Yes on this sub menu to reset all LCD TV operational settings Do this only if any of the following conditions occurs The system fails to respond to the remote control make sure the remote control batteries are still working and that you are within the transmission range The new configuration settings caused unexpected results You forget the system PIN k Seon Time PL Wow Menu Language Date amp Time Poser istom Label Reset gt NOTES If a system PIN was set up earlier you will be prompted to enter it to access this sub menu If you hace forgotten your PIN key in 0000 This 15 the default PIN After the system reset the screen will automatically display the Channel List menu Perform a channel scan to reload the channels to your LCD TV 44 SETUP MENUS E LOCKS Use the Locks sub menus to change the system PIN and set allowable video content for TV programs and DVD titles based on their rating levels Audio Channels settings The first time you access the Locks menu you will be prompted to set a system PIN Key in your
17. ed rating block takes precedence over content rating designation SETUP MENUS E 1 2 2 USA Movie Use this sub menu to select the ratings of allowable movies These ratings are determined by the Motion Picture Association of America MPAA USA Movie PG 132 LISA Howe 1 Use the lt P gt keys to select a rating box 2 Press C to block movies rated as such 3 Select Done and then press General Audience Contains nothing most parents will consider offensive for even their Admitted youngest children to see or hear suitable for young children Parental Guidance May contain some material parents might not like to expose to their young Suggested children material that will clearly need to be examined or inquired about before children are allowed to view the film PG 13 Parents Strongly May contain some scenes of drug use use of one of the harsher sexually Cautioned derived words may be heard May be inappropriate for pre teens Restricted May contain some adult material Parents are urged to learn more about the film before letting their children view it No One 17 and May contain explicit sex scenes an accumulation of sexually oriented Under Admitted language and or scenes of excessive violence Suitable for adult audiences only Rating does not signify that the film is obscene or pornographic X Rated Contains extreme violence or explicit sex suitable for adults audiences on
18. een To clean the case 1 Wipe the case with a soft dry cloth 2 If it still is not clean apply a small amount of non ammonia non alcohol based mild non abrasive detergent onto a clean soft lint free cloth then wipe the surface SYSTEM TOUR 1 PACKAGE CONTENTS i az 0006 68 0000 818 612 600088 KOF E eel User manual Warranty card SYSTEM TOUR 2 CONTROL PANEL 1 Display the LCD TV setup screen 3 CH During TV viewing adjust the channel In a menu screen select an item Toggles the power on and off 3 TERMINALS SPDIF OUT SYSTEM TOUR 1 Service For service maintenance purposes only 3 VGA Using a 15 pin VGA cable connect to a computer or other device with a VGA output 5 YPbPr Audio Input Left Right Connect an external audio source to these jacks 7 SPDIF Audio Output Connect this output to an external digital audio receiver 8 HDMI 1 2 Connect to an external video device such as a DVD player game system cable or satellite box 10 TV Tuner Connect the LCD TV to an antenna or cable service Supports NTSC ATSC and cable formats 12 Composite Audio Output 1 2 Right Left Connect this output to an external audio receiver SYSTEM TOUR 4 REMOTE CONTROL 1 Power 1 Toggle the TV power on and off 3 PIP Function not available for this model 5 Sleep 222 Set the sleep timer for the L
19. em clock and time zone settings Set Date Set Time Month lar Mii Tr Use the lt gt keys to select a date and time segment Use the A V keys to adjust the value Set live Zont ALn ka 15 Ii Sa lag Press C to cycle through available time zone options eva EU al Le The system date and time settings are not configurable if the Auto Update function is enabled Clock settings will depend on the TV broadcast stream D 5 4 Daylight Saving D 5 5 Auto Update Use these sub menus to toggle the DST and Auto Update functions on or off Sel lie lonsAlas ka 15 Press C to toggle the DST function on or off Enable this pay thy S 1 mb function only if DST is observed in your area Press C to toggle the Auto Update function on or off T EN lU pi arce gt When enabled the clock settings will be based on the TV broadcast stream 41 SETUP MENUS D 6 Power Mode Use this sub menu to select the LCD TV behavior when it is turned off i ibA pop P i PUT Normal Menu Language T T LEE LEE mir Enemy Saving F T rer Hoe 3 a Cf Label Press C to cycle between options FW Werth 21 A 1 Normal The TV enters a low power standby state backlight is turned off The TV can be quic
20. he provided plug does not fit into your wall outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at the ends of the cord Only use attachments and accessories specified by the manufacturer Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the LCD TV When a cart is used use caution when moving the cart to avoid injury or damage eS EN Unplug the LCD TV during lightning storms or when it will not be used for a long period of time Refer all servicing to qualified service personnel Do not attempt repairs yourself The product warranty does not cover repairs or attempted repairs by anyone not authorized by the manufacturer Servicing is required when the LCD TV has been dropped or otherwise damaged in any way liquid has been spilled into or objects have fallen onto the LCD TV the LCD TV has been exposed to rain or moisture and does not operate normally Circuit Overload Do not overload wall outlets extension cords or power strips This can result in a fire or electronic shock Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them Periodically inspect the cords for damage Install the LCD TV near a wall socket outlet where the power cord can be readily access Ventilation The s
21. ifferent viewing conditions Showroom settings Game View Mode ce ports Fre 1 Movie Advanced Custom escription Allows the user to customize the display settings and select to which input source should the customize settings be applied 26 SETUP MENUS A 4 Advanced Select this sub menu to adjust the picture quality in more detail Film Mode ON Dyna mic Contrast ON ress to toggle the feature on and off ettii 15 Mew Mode Color Stretch Presets st Noise Reduction Press C to display the feature s adjustment bar then use the lt gt keys to choose your preferred setting Film Mode This feature improves the appearance of movies converted from film originally encoded at 24 frames second to video including DVD titles When enabled picture is less jerky and has a cinematic picture quality Dynamic Contrast This feature enables automatic contrast adjustment based on the picture brightness Color Stretch This feature allows for a more vivid color display Noise Reduction This feature improves picture quality from a weak broadcast signal There are four available settings as indicated below Color Temperature Color temperature refers to the level of white balance in the display There are four available settings Warm Noutral T Warm Pictures appear more reddish Neutral Pictures appear more white Cool Pictures appea
22. kly turned on next time Energy All system power is turned off The TV must be fully booted Saving each time you turn it on D 6 Autosource Use this sub menu to toggle the Autosource function on or off Captions leon PC CA Menu Language Press C to cycle between options T LUE Dame Fosse Hae The TV will automatically detect and switch to a new input connection e g The TV will automatically switch to PC mode when you connect to your computer Listom User will need to manually switch to the new input using the Input key or the individual input source keys on the remote control FW Versa E 1 A 42 SETUP MENUS D 8 Custom Label Use this sub menu to assign a device label for each of the input terminals These labels will be displayed when you press any of the individual input source keys Tuner Source 0 leo Ti mri CVBS 1 Source 1 vi CVBS 2 Source 2 Menu Language Date amp 1 Use the A Y keys to select an HDMI 1 Source 4 input option and then press C HDMI 2 Source 5 E VGA Source 6 isto Lahel Version B 1 A Custom Source Label Clear QAM 2 Use the 4 9 A Y keys to select a label for the selected input option 3 Press C to apply the new label D 9 FW Version Use this sub menu to view the firmwar
23. located on the left and right I O panels of the LCD TV IMPORTANT Turn off the LCD TV first before connecting an external device to prevent any possible damage or physical injury SERVICE PORT v gt Component cable d Audio cable v v ar Vp 4 I R AUDIO OUT SPDIF OUT DVD player Digital TV tuner Ce fesse 3 Sa 1 0 f your external device has a component terminal COMPONENT connection is recommended you can view high quality pictures 17 3 5 mm stereo mini jack cable Adis aor RGB Ea Audio Video cable T Audio R Audio 0 4 Optical fiber cable O AUDIO OUT Audio amplifier AUDIO OUTPUT terminal INSTALLATION Sree cas Hina UNS E 120 VAC 60 Hz For more information about external device connections see the operation manual of the external device you wish to connect to the LCD TV Make sure that the correct cables are connected to each terminal Improper cable connections may cause damage to the LCD TV TV cable input You can use a commercially available audio video cable Component YPbPr input Picture can be displayed only when a 480i 480P 720P or 1080i signal is received HDMI input
24. lots and openings on the cabinet are provided for necessary ventilation To ensure reliable operation of the LCD TV and to protect it from overheating these slots and openings must never be blocked or covered IMPORTANT INFORMATION Never cover the slots and openings with a cloth or other materials Do not block the openings by placing the LCD TV on a bed sofa rug or other similar surface Do not place the LCD TV in a built in installation such as a bookcase or a rack unless proper ventilation is provided or the manufacturer s instruction have been adhered to Warnings and Precautions Do not orient the LCD TV towards direct sunlight to reduce glare If the LCD TV will not be used for a long period of time unplug the unit and remove the batteries from the remote control Avoid touching the display screen by hand or any object Never remove the rear cover The LCD TV interior contains high voltage parts You may be seriously injured if you touch them Always handle the LCD TV with caution when moving it Do not install the LCD TV in airtight compartments or in areas where it can be exposed to water high temperature Ensure that the area around the LCD TV is clean and free of moisture Do not place anything on the LCD TV that can hinder heat dissipation Do not
25. ly 48 SETUP MENUS E 1 3 Canada Use this sub menu to select the classification categories based on Canadian ratings of allowable TV programs and movies Block Umated Shows OFF USA English 1 3 1 French Use this sub menu to select the ratings of allowable TV programs and movies These ratings are based the classification categories determined by La R gie du cin ma du Qu bec French CAN English 1 Use the 4 keys to select a rating box 2 Press C to block TV programs and movies rated as such 3 Select Done and then press For general audiences Not suitable for children under 8 years of age 13 Not suitable for persons under 13 years of age Not suitable for persons under 16 years of age Not suitable for persons under 18 years of age 49 SETUP MENUS E 1 3 2 CAN English Use this sub menu to select the ratings of allowable TV programs and movies based on the Canadian Home Video Rating System determined by the Canadian Motion Picture Distributors Association CMPDA English English 1 Use the 4 keys to select a rating box 2 Press C to block TV programs and movies rated as such 3 Select Done and then press C E 2 Change PIN Use this sub menu to change the system PIN in case the original one has been compromised You will need to key in the original PIN If you forget the original PIN y
26. nce persists even after performing the above measures consult the Westinghouse Service Center or an experienced radio TV technician for assistance FCC Warning To assure continued FCC compliance use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores If a BNC cable is used use only a shielded BNC 5 cable Also any unauthorized changes or modifications not expressly approved by manufacturer will void the user s authority to operate this device IMPORTANT INFORMATION 3 IMPORTANT SAFETY INSTRUCTIONS Make sure to note and follow all warnings and instructions marked on the LCD TV Observe the following safety instructions Read and understand all the safety and operating instructions in this manual before you use the LCD TV Keep this user manual for future reference Do not use the LCD TV near water Avoid exposing the LCD TV to moisture or high humidity Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Avoid exposing the LCD TV to direct sunlight or high temperatures Do not install near a motor or transformer where strong magnetism is generated Do not attempt to bypass the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong If t
27. on go to page 41 Power Buttom Power To turn on the power Press 1 on the control panel or on the remote control To turn off the power Press 1 on the control panel the remote control The LCD TV shut down behavior will depend on the enabled Power Mode setting Go to page 41 for related information gt NOTES If you are not going to use the TV for a long time be sure to disconnect the power cord from the wall outlet and remove the batteries from the remote control In standby mode a small amount of electricity is still consumed even when the power is turned off 2 ADJUSTING THE VOLUME Press Vol to increase the volume The bar indicator shifts right Press Vol to decrease the volume The bar indicator shifts left Mute 1 Volume Press X to turn off the sound Mute appears on the volume bar Press again to turn on the sound Volume BASIC OPERATIONS 3 CHANGING CHANNELS There are several ways to change channels Unless otherwise indicated the buttons referred to in the following instructions are located on the remote control Using Ch Buttons To browse through the available channels press Ch A or Ch V on the remote control or on the control panel OI Vol Ch v Using the Channel Keys Channel keys 0000 0000 00900 To use the Channel Select function Key in the channel number using the 0 thru 9 buttons and then
28. ors Electric service NEC Section 810 21 equipment 7 LE 2 Ground clamps Power service grounding electrode system NEC National Electrical Code NEC Art 250 Part H Lightning For added protection for the LCD TV during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system DO NOT disconnect the antenna or the power cord during a heavy storm lightning may strike while you are holding the cable cord causing serious injury Turn off the LCD TV and wait for the weather to improve Power Lines An outside antenna system should not be located in the vicinity of overhead power si lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal 5 CLEANING THE LCD TV MAKE SURE THE LCD TV IS TURNED OFF AND THE POWER CORD IS DISCONNECTED FROM THE POWER OUTLET NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR THE CASE To clean the screen 1 Wipe the screen with a clean soft lint free cloth This removes dust and other particles 2 If it still is not clean apply a small amount of non ammonia non alcohol based glass cleaner onto a clean soft lint free cloth and wipe the scr
29. ou need to perform the Reset All option under the Settings sub menu a ir 1 Key in your original PIN Ratings Enter PIN Change PIN 2 Key in the new PIN Choose mew PIN Reset Locks 3 Key in the new PIN again to reconfirm it 50 SETUP MENUS E 3 Reset Locks Select Yes on this sub menu to reset the system PIN and all parental lock settings to their default unlock status Ratings Locks Change PIN Reset Locks 51 SPECIFICATIONS 176 176 V Audio Video Input VGA 75 ohms 0 7 Vp p PC audio in mini stereo Terminals H V separated TTL for PC fh 30 63 kHz fv 50 75 Hz HDMI 1 and HDMI 2 RCA L R stereo TV tuner YPbPr 1 stereo Composite 1 and Composite 2 two RCA L R stereos Audio Video Output RCA stereo SPDIF optical PC Compatibility Recommended 1360 x 768 60 Hz reduced 1366 x 768 60 Hz blanking Supported 1280 x 720 60 Hz H 30 63 KHz 1024 x 768 60 Hz V 50 75 Hz 720 x 400 70 Hz 640 x 480 60 75 Hz Power Voltage 120 VAC 60 Hz 3A Power Consumption DC lt 190W blue illumination Off in normal mode Autowake is enabled lt 23W Off in energy Autowake is disabled lt 2W saving mode Power saving mode Autowake is on lt 6w amber illumination Preset Timing Mode Pre adjusted to reduce blanking 1366 x 768 60 Hz Operating Conditions Temperature 15 to 35 C humidity 75 20
30. ough available menu options gt NOTES Available menu options depends on the current LCD TV settings A selected menu sub menu or menu option is displayed in yellow The last viewed menu or sub menu screen will be displayed the next time you press 23 SETUP MENUS 2 MENU SETTING SCREENS There are five primary LCD TV setup menus For details on the options available for these menus refer to the page numbers indicated below Picture Settings Page Page SettiNgS 26 Closed 2 36 View Mode oser 27 tees 40 BE een E eee 27 P E 40 RN ses dresse 28 Menu 41 a 29 Date amp TIME Le 41 Power 43 43 Audio Custom 44 muc Saone 44 Page Reset All 45 Dll c er 30 30 Balance Free ne rene 30 Locks edit 31 Digital AUGIO 31 Page 32 Rating Locks 46 RR RE 32 Change PIN 51 TV Speakon 33 Reset Nor TNT 52 PROSE NR 33 Channels Page CHASSIS saucers 34 Antenna 35 SCAN dc 39 gt NOTES The screenshots used in this manual are for explanation purpose
31. r with a bluish tint Custom Select this option and then press to manually adjust the RGB red green blue levels Default levels are set at Neutral 27 SETUP MENUS A 5 Reset Select Yes on this sub menu to reset all Picture related settings Picture settings View Mode 28 SETUP MENUS B AUDIO Use the Audio sub menus to configure the audio quality These settings apply to the LCD TV speakers not to any connected audio device settings gt NOTE The configuration settings for the Audio sub menus will lobe be applied to all input sources lamor Analog Aud gita l Aude IV Spa Resell B 1 Bass B 2 Treble B 3 Balance Use these sub menus to adjust the sound pitch quality and the balance between the L R speakers Bass Treble Press to display the option s adjustment bar then use the lt gt keys to choose your preferred setting Balance Bass Calibrate low pitched sounds al i Analog Treble Calibrate high pitched sounds Balance Adjust the sound balance between the L R speakers Digital IVSpeahes Reset 29 SETUP MENUS B 4 Analog Audio Use this sub menu to select the preferred audio stream for viewing analog TV programs Has Ti obi le Ha L rica Mono c te reo Deitel Audio SAP SPUN Al i E VS peu he or Re T
32. ress C to view the adjustment bar for the screen s horizontal and vertical positions and then use the lt gt keys to choose your preferred setting Press C to view the adjustment bar for the screen s phase and then use the lt gt keys to choose your preferred setting Use this option if the display flickers Press to automatically adjust the screen s horizontal vertical position to its ideal setting based on the current VGA signal Press C to toggle the display power management mode on or off When enabled the TV enters standby mode if no VGA signal is received after one minute SETUP MENUS D 4 Menu Language Use this sub menu to select which language to use for on screen menus La PONS Eng 115 11 Seo Time PC AE French Menu Language Spa mis li Date amp Time Fosses Mode Listom Label Fw vi ARTE E me 1 D 5 Date amp Time Use this sub menu to configure the system clock and time zone settings You can also choose to enable the Daylight Saving Time DST and Auto Update functions n a m A A leom Timei pareys Set Pi u T LI Hi CH Za A Las ka US amp Time aliq Sev ny CT Hide Auto LU pg are CE FW Reset All 40 SETUP MENUS D 5 1 Set Date D 5 2 Set Time D 5 3 Time Zone Use these sub menus to configure the syst
33. rs and excessively long cables Replace poor antenna cables and or connectors to improve signal quality Press and make sure the Standard option is selected Press and select Picture Advanced and then adjust the Noise Reduction setting In HDMI mode make sure the external device is compatible with the LCD TV Wrong abnormal or missing If any colors red green or blue are missing check the video cable to make sure it is colors securely connected Loose or broken pins in the cable connector could cause an improper connection Press amp and select Picture Settings to adjust the Hue and Saturation settings You can also select Picture Advanced to adjust the Color Temperature settings Connect the TV to another computer and check if the problem is with the computer screen No sound Make sure the audio input cable is properly connected to the correct terminal and that the correct input mode is enabled The volume may be muted press X or the Vol key to turn on the volume on Press amp and select Audio to adjust the Bass Treble and Balance settings If you are using the TV speakers press and select Audio to make sure the TV Speakers option is set to On If you are using an external audio device press and select Audio to make sure the TV Speakers option is set to Off After which make sure volume on the external audio device is turned on gt NOTE If the problem condition persi
34. s only and may differ in appearance from those displayed on your LCD TV Depending on the current LCD TV settings for example the input source it may not be possible to view or adjust some menu items 24 SETUP MENUS A PICTURE Use the Picture sub menus to configure the display quality Audio settings The configuration settings for the Picture sub menus will only be applied to the current input source Settings Mew Mode Advanced Reset A 1 Settings Use the Settings sub menu options to manually adjust the display quality Use the lt keys to adjust the option level Unk nibns Adjust the luminance level Contract Adjust the brightness to darkness ratio Adjust the balance of the red green and blue colors the display Adjust the color intensity Saturation Adjust the sharpness or softness of the display t 4k Bar klighi Adjust the brightness level of the screen backlight 25 SETUP MENUS A 2 View Mode Use this sub menu to select the display s aspect ratio Use the A V keys to select the preferred setting E m NH MM Standard gt Picture is displayed in its original size Settings FI gt Picture is displayed to cover the entire screen View Mode E Picture is scaled down to fit the screen Advanced Reset A 3 Presets Use this sub menu to select one of five preset view options optimized for d
35. ss C to cycle between the options available for the selected aspect 3 Select Done and then press 37 SETUP MENUS D 1 5 Caption Preference Use this sub menu to select which CC mode to implement for TV programs providing CC content Use the CC Basic Selection setting Always Advanced Automatic gt Use the program s default CC content p Use the CC Advanced Selection setting Basic Selection Advanced selection nied Appearance Caption Preference Reset Captions D 1 6 Reset Captions Select Yes on this sub menu to reset all CC related settings Basic Selection Advanced selection Appearance Caption Preference Reset Captions 38 D 2 Sleep Timer SETUP MENUS Use this sub menu to select the duration after which the TV will automatically turn off leon imei minutes PT minutes Menu Language Date amp Time Povey Mode Listom Lahel FW Yeorspom E et A D 3 eave minutes minutes minutes Disables the sleep timer function Select a sleep timer setting Use this sub menu to configure VGA related settings applicable when you connect the TV to a computer EZ Horizontal loop pe Vertical Pr z yi Menu Lai Phase Date amp Time Auto Sync DPMS OFF Poser Label FW Reset All 39 P
36. sts even after performing the recommended corrective actions contact us by Logging on to www wde com Contacting the Westinghouse Customer Service at 866 287 5555 or e mail us at service wde com APPENDIX A LCD TV BASE REMOVAL If you intend to repack the LCD TV unit for shipping or storage or you want to change the installation to a wall mount option you must first remove the LCD TV base IMPORTANT The LCD TV has VESA FPMPMI compliant 200 x 200 mm mounting holes Be sure to the operating instructions supplied with the wall mount bracket when installing the unit It is recommended that you employ qualified contractors for wall mount installation 1 Turn off the LCD TV and all connected devices 2 Disconnect the power cord from the LCD TV 3 Disconnect all signal cables from the I O port terminals 4 Lay the LCD TV on a clear flat and stable surface CAUTION The LCD TV unit maybe too heavy for one person to lift If this is the case make sure to ask assistance in handling the LCD TV to prevent physical injury and or damage to unit 5 Remove the four screws securing the base to the LCD TV 6 Detach the base from LCD TV 7 Pack the screws you removed in step 7 together with the LCD TV base for future reassembly 54 APPENDIX B SAFETY BRACKETS You can use the safety brackets located on the LCD TV s spine module cover to protect the unit from accidentally tipping over or from unwanted theft
37. ta scar s um 4 Rum ue RE Cable Scan Abort Scan C 3 Cable Scan Select Yes on this sub menu to scan for available cable and digital channels in your area Channel List Antenna Scan Cable Scan Are you Sure you wish to 1 Lei Abort Scan 34 SETUP MENUS D SETTINGS Use the Settings sub menus to configure the LCD TV operational setup and view the current firmware version Audio Channels 152 DUET PA Menu Language Date amp Time Poser Mode Lael FW Reset All D 1 Closed Captions Use the Closed Captions sub menus to configure the settings for closed captioning CC also known as subtitles in TV programs CC are primarily intended to allow people who are deaf or hard of hearing to access TV programs However this feature is also useful for viewers who are learning a new language beginning to read or in a noisy environment As the video plays text captions are displayed that transcribe speech and often other relevant sounds ILA Dons EY gt NOTES This menu only applies to the CC feature of TV programs CC availability and content is dependent on your TV provider and Advanced Selection may vary across channels and TV programs Time ALA Selection Henu Language Sg oe ate Mm TIL H Povey He Appearance Alito ice 1 1 ij g
38. the male plug is a NEMA5 15 style Figure A2 UL listed and CSA labeled For LCD TVs that are to be placed on a desk or table type SVT or SJT cord sets may be used For LCD TVs that are to be placed directly on the floor only SJT type cord sets may be used The cord set must be selected according to the current rating for the LCD TV Consult the table below for the selection criteria of power cords used in the United States and Canada FCC COMPLIANCE STATEMENT This equipment has been tested and complies with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and may cause harmful interference to radio communications if not installed and used in accordance with the instructions However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the distance between the LCD TV and the receiver Connect the LCD TV to an outlet on a circuit separate from to which the receiver is connected f the interfere
39. tic bag containing the LCD TV base screws and screwdriver from the LCD TV base 12 INSTALLATION 9 Align the base to the bottom side of the LCD TV L 10 Secure the base to the LCD TV with the four bundled screws 11 Carefully orient the LCD TV in an upright position 13 INSTALLATION 2 REMOTE CONTROL BATTERIES 1 Remove the battery cover 2 Insert the batteries Make sure the and marks on the batteries match those inside the compartment 3 Re attach the battery cover Remote Control Transmission Range Transmission range depends upon the reception angle The range of coverage is 20 horizontal vertical at a distance of 20 feet from the LCD TV cm 1 INSTALLATION 3 ANTENNA CONNECTION Outdoor Antenna Connection Cable TV lead in en VHF UHF or VHF UHF combination antenna 75 ohm coaxial cable round or 300 75 ohm ADAPTOR Not supplied 300 ohm twin lead flat UHF ANTENNA db a Home Antenna terminal 75 ohm Separate VHF UHF Antenna VHF ANTENNA 300 ohm twin lead COMBINER Not supplied 300 ohm twin lead C IN 75 ohm coaxial cable gt NOTE The F type connector should be finger tightened only When connecting the RF cable to the LCD TV do not tighten F type connector with any tool If tools are used it may cause damage to the LCD TV e g
40. ww wde com for a list of remote codes remote No picture Make sure the video input cable is properly connected to the correct terminal and that the correct input mode is enabled To illustrate when a VGA cable is connected to display a computer screen the PC input mode must be enabled In TV mode verify that the antenna is properly connected and that the preferred channel is enabled in the channel list Press and select Channels Channel List Press and select Picture to adjust the display settings If you are using a Macintosh computer older that is older than a G3 model you need a Macintosh adapter No picture or the No Signal Make sure the VGA cable is properly connected to the LCD TV s VGA port message appears when a Decrease the video resolution setting on the computer and try again VGA cable is connected Press amp and select Picture to adjust the display settings Press and select Settings PC VGA to adjust the VGA settings Decrease the video resolution setting on the computer and try again Picture is cut off or appear in Press and make sure the Standard option is selected a sidebar screen In PC mode press 8 and select Settings PC VGA and adjust the Horizontal and Vertical settings Poor image quality in TV Check your antenna connection If necessary rotate the antenna and wait up to ten seconds mode cutoff picture snowy for a signal images Reduce signal splitte
Download Pdf Manuals
Related Search