Home

WACOM Intuos - Pro User's Manual

1. Force Proportions Tablet Area Full Default Image dynamically updates to illustrate the selected mapping relationship When FORCE PROPORTIONS is unchecked the correct scale or proportions are not maintained The selected tablet area is mapped to the selected display area Drawing a circle on the tablet may create an ellipse on the display screen This is the default setting for all tools When FORCE PROPORTIONS is checked the correct vertical and horizontal proportions are maintained Drawing a circle on the tablet results in a circle on the display screen Depending on your settings some portions of the tablet active area may no longer be usable when this option is selected Note Although Intuos Pro is optimized for use with 16 10 aspect ratio displays the default settings automatically adjust for use with other aspect ratio displays Index The ORIENTATION setting is tablet specific and applies to all tools and applications See Installing the driver MODE options control how the screen cursor moves e PEN MODE sets the cursor movement to correspond with the position of your pen on the tablet Wherever you place your pen on the tablet the cursor will jump to a corresponding point on the screen This is known as absolute positing and is the default setting for the pen e Mouse MODE enables you to move the screen cursor with a pick up and slide motion similar to using a standard mouse
2. yy LJ 0 cre Contents THE INTUOS PRO MULTI TOUCH EXPERIENCE Intuos pro is designed to enhance the way you work Touch enables you to interact with a computer using only your fingertips on the Intuos pro tablet You can use touch on Intuos pro as you would on any other Mac or Windows device such as phones trackpads and notebooks First learn the basic actions to navigate and perform typical mouse operations Then learn how to scroll zoom and rotate Touch is activated whenever you touch the tablet See The tablet active area e When using touch you can generally position your fingers as far apart as is comfortable However placing your fingers too closely together may be interpreted by the tablet as input from a single finger or the tablet may confuse which finger initiated or performed an action or gesture Your fingers must remain within the active area e Experiment with touch to see what works best for you Take care to prevent accidental touches on the tablet when making gestures For example if your small finger or the palm of your hand touches the active area of the tablet when zooming or scrolling then you may trigger an unanticipated right click Navigating with touch Setting the touch options Contents Index yy LJ C ore Contents NAVIGATING WITH TOUCH The touch feature of your Intuos pro touch tablet enables you to control a computer using only your fingertips on the tablet surface See The t
3. Right Click z Ti i P Poe CNE cE Drag the TILT SENSITIVITY slider to change tilt sensitivity Test the new setting in an application that supports tilt The tilt setting applies to both the tip Double click here to change the pen tip function and eraser of your tool Tilt is direction sensitive and can be e Atleast one tool button should be set to the CLICK function PRERE used in some applications to control e The tip must be set to CLICK in order to draw in most graphics brush orientation or other applications characteristics Off Large Click Default Note You can change how the side switch operates for right clicks or other click functions See Advanced options Contents Index _ le D 32 QT LJ C ore Contents CUSTOMIZING THE EXPRESSKEYS To customize the ExpressKeys select the EXPRESSKEYs tab Each key can be customized to perform a Display Toggle modifier keystroke or other function When you open the EXPRESSKEYS tab the current functions are shown in the corresponding pull down menus Choose a function to perform when the key ExpressKeys is pressed ExpressKey functions can be defined for use with specific applications Zouch Oo Get See using the ExpressKeys for more information Show Settings z _ Note Small sized tablets are equipped Modifier Z with six ExpressKeys Precision Mode X Shift Modifier z Display Togg
4. WORKING WITH MULTIPLE MONITORS If your computer is equipped with more than one monitor Intuos pro will map to the monitors based on how they are configured in the display properties control panel e If more than one monitor is in use and you are in extended monitor mode the tablet maps to all monitors as if they were one large display Monitor 1 Monitor 2 Example of tablet mapping to a single monitor Example of tablet mapping to the entire system desktop which is displayed on two monitors e If your monitors are in mirror mode both monitors display the same content the tablet maps to the entire space on each monitor and the screen cursor is displayed on each monitor simultaneously See your hardware and operating system documentation for details on configuring your computer and operating system for use with multiple monitors Tips e You can customize the tablet to map to a single monitor or to a portion of the monitor area See Tablet to screen mapping e When your system is configured with multiple monitors you can assign the DISPLAY TOGGLE function to an ExpressKey This enables you to toggle the current tablet mapping and screen cursor between the primary display and your other monitors See working with Display Toggle CONTROL PANEL OVERVIEW Use the Wacom Tablet control panel to customize your Intuos pro tablet or to
5. e The tablet draws current from the battery whenever the Wacom wireless module is on To reduce power drain the tablet will enter sleep mode whenever the battery level is very low The battery must be recharged A small amount of current is drawn even in sleep mode and will slowly discharge the battery It is a good idea to charge the battery and turn the wireless module off before leaving the tablet unused for a number of days e Once the battery voltage has fallen below a minimum safety level an internal protection circuit within the battery prevents any charging If a battery with a low charge remains in the tablet for an extended period of time the small trickle of current used by the tablet may discharge the battery so far that the internal protection circuit is activated If this occurs you can no longer charge the battery When leaving the tablet unused for an extended period of time preserve the battery by removing it from the tablet You cannot recharge a Li lon battery that has been over discharged e For extended battery storage a month or longer Keeping the battery in a partially not fully charged state along with cool storage can slow the aging process The recommended charge level is approximately 40 for optimum battery recharge when placed back into service If storing both tablet and battery you do not need to remove the battery However it is always good practice to remove the battery when storing the tablet
6. installed on your system and is currently lt lt connected All settings shown below the list apply to the selected tablet or pen display e The control panel will not launch unless a Took lt Intuos pro M launch i Z supported tablet or pen display is Functions Touch Grip Pen Art Pen connected to the computer TAi r Application lt e Settings can only be viewed or changed All Other Illustrator Photoshop l for an attached tablet or pen display e A tablet or pen display cannot be deleted Current selections are highlighted from the control panel list unless it is attached to the computer See also Installing multiple tablets and Changing the tablet mode 2 x The TOOL list displays icons for the tablet FUNCTIONS and for the different tools that have been used on the tablet To customize settings for a tool click on its icon within the TOOL list The appropriate tabs will be displayed Note The pen will be automatically added to the TOOL list when first used on the tablet and functions using the default settings See also Working with multiple tools Use the APPLICATION list to define TOOL settings that apply only to a specific application See Application specific settings Note The APPLICATION list is optional It is not necessary to select or add applications in order to customize your Intuos pro tool s Contents Index _ le D 23
7. D 43 yy LJ 0 ore Contents FUNCTION NAME DESCRIPTION ERASE Sets a button so that when the button is pressed the pen tip will act like the eraser in applications that support the ERASE function See Tablet controls SETTINGS Activates on your display screen an interactive diagram of the current ExpressKey Touch Ring pen and touch settings The current functions for each control are shown Click on any section of the diagram to open the appropriate Wacom Tablet control panel tab You can then adjust settings as needed Dismiss the diagram by again pressing the ExpressKey or other tool button to which this function is assigned or by clicking anywhere outside of the diagram Settings may vary depending on your tablet model Contents Index _ le D 44 QT LJ 0 ore Contents FUNCTION NAME DESCRIPTION TABLET PC e TABLET PC INPUT PANEL e JOURNAL e TABLET PC DEFINED Tablet PCs and Windows systems that support the Tablet PC Input Panel Opens the Tablet PC Input Panel when you press a tool button set to this function Windows 7 and Vista and Tablet PC systems that include Microsoft Journal Opens Microsoft Journal Tablet PCs and Windows systems that support the Tablet PC Input Panel Sets the button function according to settings found in the Windows 8 Windows 7 and Vista TABLET PC SETTINGS and PEN AND INPUT DEVICES control panels DISABLED Disables the button functi
8. If you have a problem with your tablet first check the tablet installation guide to be sure the unit is installed correctly Then review the Troubleshooting procedures If you cannot find the answer in this manual you may find updated information about your problem in the appropriate Notes file for your platform located on the Intuos Pro installation CD You can also visit http Awacom com where you can choose the Wacom web site for your region and check the product FAQs Frequently Asked Questions If you have an Internet connection you can download the latest software drivers from the Wacom web site for your region See If you cannot solve the problem and you think your tablet is not working properly contact Wacom Support for the area where your product was purchased When you call you should be at your computer with the following information available e This manual e Tablet serial and model number Located on the bottom of the tablet e Driver version number See the Intuos Pro installation CD or click on the Wacom Tablet control panel ABOUT button e The make and model of your computer and operating system version number e A list of peripheral devices attached to your computer e The software application and version you were using when the problem occurred e The exact wording of any error message that appeared on your screen e What happened and what you were doing when the problem occurred e How you tried to solv
9. Should you have any questions about this Agreement or if you want to contact Wacom please write to IN NORTH AND SOUTH AMERICA CONTACT Wacom Technology Corporation 1311 SE Cardinal Court Vancouver Washington 98683 U S A IN ASIA PACIFIC CONTACT Wacom Co Ltd Asia Pacific Office Sumitomo Fudosan Grand Tower 31F 8 17 1 Nishi shinjuku Shinjuku ku Tokyo 160 6131 Japan Contents Index IN JAPAN CONTACT Wacom Co Ltd Sumitomo Fudosan Grand Tower 31F 8 17 1 Nishi shinjuku Shinjuku ku Tokyo 160 6131 Japan IN MAINLAND CHINA EXCEPT HONG KONG CONTACT Wacom China Corporation 1103 Beijing IFC West Tower No 8 Jianguomenwai Street Chaoyang District Beijing 100022 China E mail support wacom com cn taap yy LJ 0 ore Contents GLOSSARY Active area The navigation and drawing area of the tablet where touch or your Intuos Pro tools are detected See touch sensor Application specific settings Intuos Pro tool and tablet settings that have been customized for individual applications These can be customized by the user in the Wacom Tablet control panel or set automatically when applications with pre set defaults are in use Application specific settings are in effect whenever you use the application Aspect The ratio between the vertical and horizontal dimension of the tablet or display Click force The amount of force you must apply to the pen tip for a click to occur Digital Ink A broa
10. For example you can create custom zooming or other actions within an application Mac The available options are OPTION COMMAND Apple key CONTROL and SHIFT KEYSTROKE Assign custom functions to the fingerwheel by selecting KEYSTROKE This is useful when working with repetitive functions Keystroke s that you define are sent once for each notch of wheel movement To double the speed of a keystroke action enter the keystroke sequence twice within the DEFINE KEYSTROKE dialog box DISABLED Disables the wheel function The mouse buttons are chordable You can press two or more buttons simultaneously For example if you customize one button to simulate the CTRL key and another to simulate an ALT keystroke when you press both buttons a CTRL ALT is simulated Note To configure the Mouse for left handed use simply reassign the button functions as needed You can also open the Wacom Tablet control panel click on OPTIONS and select LEFT in the MOUSE HANDEDNESS group Contents Index E le gt 87 yy LJ 0 Cree Contents Mouse MODE options on the MAPPING tab Mapping determine how the tool will track when the optional mouse is available in the TOOLs list i Orientation ExpressKeys Left CA MOUSE TRACKING options apply only to the Mouse Tracking mae optional Mouse for Intuos pro Use Tablet Orientation Mode e When USE TABLET ORIENTATION is selected Pen Mouse moving the mouse toward the top of the D Use Mous
11. QT LJ C ore Contents INSTALLING THE DRIVER On Windows systems the driver installs automatically when the Intuos pro is connected to your computer The driver is also on the Installation CD or as a download from the Support area of the Wacom website On the Mac you can install the driver from the CD or download and install it from the Wacom website Note Your Intuos pro will not work without the driver Make sure to install the driver to use your tablet To install the driver 1 Save your work and close all open applications 2 Temporarily disable any virus protection programs 3 Install the driver e If you are using the Mac insert the Installation CD into your computer s CD ROM drive If the software installer menu does not display double click the INSTALL or STARTUP icon located on the CD You may also download the driver from the Wacom website e On Windows systems the installation should begin automatically after connection of the Intuos pro However you may also install from the CD or download the driver from the Wacom website Click INSTALL TABLET and follow the prompts to install the driver software Reactivate your virus protection program After completing the software installation make sure you can use your pen on the Intuos pro to move the screen cursor When you place the pen tip on or close to the active area the cursor should immediately jump to a corresponding position approximately beneath the pen t
12. Select a Portion of screen area for tablet to screen mapping Select a Portion of tablet area for tablet to screen mapping t aa yy LJ 0 Cree Contents Use ORIENTATION to select right or left orientation for the ExpressKeys MODE options control how the screen cursor Pen Eraser Mapping Orientation Ex ansia Left z moves presseys e PEN MODE sets the cursor movement to Mode correspond with the position of your pen on Ben Mouse the tablet Wherever you place your pen on the tablet the cursor will jump to a corresponding point on the screen This is known as absolute positing and is the default setting for the pen Mouse Acceleration Mouse Speed e Mouse MODE enables you to move the screen cursor with a pick up and slide nie er ist 6 eames motion similar to using a standard mouse Off High Slow Fast Also see Using the optional mouse Use ORIENTATION to select right or left orientation for the ExpressKeys Use WINDOWS INK to activate the Press and hold Use Windows Ink Default to right click Flicks and Ripples features in ae Windows Ink Select the screen cursor Select a slower or faster acceleration screen cursor tracking speed Notes You can switch between pen mode and mouse mode by using the Radial Menu If you frequently switch between pen mode and mouse mode you can assign the MODE TOGGLE function to one of your to
13. adjusting touch speed basic actions custom touch functions customizing gestures navigating with options setting navigation features speed adjusting the experience Touch problems troubleshooting Touch Ring customizing testing using Troubleshooting general problems Mac specific problems pen problems tables testing controls testing tools touch problems Windows specific problems wireless connection problems Uninstalling software USB cable connection Using Airbrush Art Pen ExpressKeys taap QT LJ 0 ore Contents mouse 86 Radial Menu 46 touch 24 Touch Ring 21 Windows specific problems troubleshooting 77 Wireless operation 54 battery charging 58 life 61 management 58 replacement 62 components 54 connection problems 74 establishing a connection 56 optimizing the connection 57 power management 58 power saving 60 setup 55 status battery 59 connection 59 testing the wireless connection 64 wireless module removal from tablet 63 wireless receiver storage in tablet 63 Contents Index 4 gt 98
14. and then back on e Move the tablet closer to the computer Make sure there are no metal or other high density obstructions in the line of sight between the tablet and computer Contents Index _ le gt 66 yy LJ C ore Contents 4 Check the pen If the tablet driver does not load properly the pen will not work properly You will be able to use the pen tip to move the screen cursor and click but there will be no other pen functionality Install the tablet driver software e Move your pen across the tablet active area The screen cursor should move in the corresponding direction on your monitor or display screen e Press the pen tip against the surface of the tablet A status LED should brighten e Next without applying pressure to the pen tip hold the pen tip within approximately 10 mm 0 4 inch of the tablet surface and press the side switch The LED should again brighten e Turn the pen over and press the eraser against the surface of the tablet The LED should brighten See also Testing the tablet controls and tools and Testing a pen 5 Check touch Attempt to move the screen cursor by tracking your finger across the tablet surface Then tap to select an item A status LED should brighten when you touch the active area of the tablet If the tablet driver does not load properly basic touch movement will be recognized but other actions and gestures will not If gestures are not recognized re install the tablet
15. monitors mapping to working with tablets installing Navigation customizing for touch New tool adding Nib replacing t a a 14 22 87 87 86 89 88 96 QT LJ 0 ore Contents Options advanced Ordering parts and accessories Orientation configuring for tablet Parts and accessories ordering Pen customizing features holding positioning with pressure sensitivity working with replacing the tip side switch testing tip replacing Pen mode Pen problems troubleshooting Pen stand using Pens optional Positioning with pen Preferences managing tablet Pressure sensitivity working with Product information Radial Menu customizing using Removing application specific settings Requirements system Screen area portion of Settings application specific creating application specific removing application specific Set up Side switch using Software driver downloads uninstalling System requirements Tablet area portion of ExpressKeys customizing testing using mode options changing orientation configuring preferences managing testing Touch Ring customizing Contents 52 91 12 91 35 36 Index testing using working with Tablet to screen mapping customizing Technical Support contacting Testing controls ExpressKeys mouse pen tablets tools Touch Ring Tip feel advanced customizing Tool buttons customizing Tools testing working with multiple Touch
16. precision mode display toggle Click TOUCH o auto scroll zoom brush size double click right click PROPERTIES to access Gaye i Touch On your touch settings amp Settings may vary R depending on your tablet pan scroll model You can also use the ExpressKeys to e Set a key to a commonly used keyboard shortcut e Set a key to launch a commonly used file or application e f you prefer not to or cannot use the side switches on your Grip Pen then set a key to right click or double click e Choose from any of the other available See Important Some applications can override and control the ExpressKey functions For details see Use the Wacom Tablet control panel to customize the ExpressKey options Contents Index E le D 20 yy LJ 0 ore Contents USING THE TOUCH RING Slide your finger around the ring to zoom in or out scroll up or down or to issue the assigned keystroke functions Zooming in Move your finger clockwise along the ring to zoom in or scroll down in most applications Tap the upper portion of the Touch Ring for single increment changes based on the assigned function Zooming out Move your finger counter clockwise to zoom out or scroll up Tap the lower portion of the Touch Ring for single increment changes Touch Ring configuration when positioned m Setting 1 AUTO SCROLL ZOOM Sets the ring to on left side of tablet Default settings zoom in graphics app
17. right click or other click function e HOVER CLICK to perform click functions without touching the pen tip to the tablet surface This is the default setting for all except Tablet Click amp Tap Press the side switch and tap the pen tip to the tablet to do a right click or other click function This is the default setting for Tablet PCs PGs Hover click Handedness e CLICK amp TAP to enable the Right precise placement of click we functions When selected you must first press the side Brightness Adjustment switch then touch the pen tip Sets the brightness of all lights on tablet to the tablet surface in order to perform the function Ni Off Dim Bright wy Pressure Compatibility Adjusts the pen pressure for compatibility with older applications that only Vv support 1024 pressure levels K Click tap v Show wireless tablet battery status in system tray e MOUSE HANDEDNESS options change the button orientation of the optional Mouse for right or left handed use e Use BRIGHTNESS ADJUSTMENT to set the brightness level or turn off all Touch Ring status LEDs and active area markers e The PRESSURE COMPATIBILITY check box should be checked if you are using graphics applications that only support a maximum of 1024 levels of pressure such as Adobe CS3 Corel Painter 9 and other older applications If not checked the pen will feel overly sensitive when using these older applications e Check the last bo
18. 4 lf you have not already done so turn on your computer and wait until the system has fully loaded 5 Continue to connect wirelessly Establishing a wireless connection Optimizing the wireless connection Contents Index yy LJ 0 ore Contents ESTABLISHING A WIRELESS CONNECTION Connect wirelessly with Intuos Pro 1 Fully charge the tablet battery See Charging the battery When the battery is fully charged as shown by the green LED disconnect the USB cable and you are ready to work wirelessly Battery status LED Power button e Amber when USB cable is e Push to connect or wake connected and battery is from sleep mode charging e Push to turn off e Green when USB cable is connected and battery is fully charged e Off when using tablet wirelessly 2 Press the power button on the Wacom wireless module A wireless connection should be established within 4 seconds If not the wireless module will turn off If this should occur see Wireless connection problems 3 Check the connection by using the pen on the tablet to move the screen cursor See also Battery and wireless connection status Intuos Pro can operate wirelessly or in USB mode but not both at the same time e Wireless mode is activated when Intuos Pro is properly configured for wireless operation and the USB cable is disconnected When the USB cable is disconnected the tablet searches and connects to the
19. An integrated application will control the ExpressKeys or Touch Ring only when that application is active and in the foreground When you close that application or select a new application pane to work in your Wacom Tablet control panel settings are returned to their previous state e To review the ExpressKey Touch Ring or pen settings for the current front most application set an ExpressKey to SETTINGS and press the key at any time Applications that have been integrated in this way will typically provide you with the opportunity to disable this functionality when first using your Wacom product with the application See the documentation provided with your application for specific details how to customize or disable this feature If an automatic prompt or the application s documentation does not describe how to disable this behavior you can use the Wacom Tablet control panel to create Application specific settings that will override the behavior of the integrated application Important If an application specific setting has been created for an integrated application setting an ExpressKey or Touch Ring mode to APPLICATION DEFINED will still allow the integrated application to control the function Contents Index t a a QT LJ 0 ore Contents IMPORTING EXPERT SETTINGS The import expert settings feature enables you to import customized Wacom Tablet control panel settings that have been specified in an XML Extensible Marku
20. If connecting to a USB hub device make sure the hub is connected to an active USB port and that the hub is active Try also connecting to another USB port or using another USB cable If using Intuos Pro in wireless mode see also Wireless connection problems The computer does not goto When you are not using your Intuos Pro tool s remove them from the sleep tablet surface or the tablet will continue to send data keeping the computer awake Note Because some metallic or other conducting objects can also cause the tablet to send data it is best to keep the tablet surface clear of all objects when not in use The screen cursor is very On rare occasions the tablet may receive interfering radio frequencies erratic or jumps around from a computer monitor or nearby AM radio station If you notice when using the tablet interference from a monitor try moving the tablet at least six 6 inches away from the monitor or change the monitor refresh rate or monitor resolution The tablet is set to Reinstall the tablet driver software and change the default orientation of EXPRESSKEYS RIGHT or the tablet See Installing the driver EXPRESSKEYS LEFT but at the log on screen the tablet seems to work upside down Contents Index E le D 71 yy LJ 0 ore Contents When working in some Some applications can override and control the ExpressKey and Touch applications the ExpressKeys Ring functions See Using integrated applic
21. PRO Customizing the pen Adjusting tip feel and double click Adjusting eraser feel Advanced tip and eraser pressure settings Customizing tool buttons Customizing the ExpressKeys Contents Index Customizing the Touch Ring Tablet to screen mapping Portion of screen area Portion of tablet area Button functions Working with Display Toggle Application specific settings Creating an application specific setting Removing application specific settings Working with multiple tools Changing the tablet mode Advanced options Managing preferences GOING WIRELESS WITH INTUOS PRO Wireless accessory components Wireless setup Establishing a wireless connection Optimizing the wireless connection Battery and power management Charging the battery Battery and wireless connection status Power saving features Battery life information Battery replacement Wireless module removal Wireless receiver storage Testing the wireless connection TROUBLESHOOTING Testing your tablet Testing the tablet controls and tools Testing the ExpressKeys Testing the Touch Ring Testing a pen Troubleshooting tables General problems Pen problems Touch problems Wireless connection problems Windows specific problems Mac specific problems Technical support options Obtaining software updates Care and maintenance t aa 34 35 37 38 39 47 49 50 50 51 51 52 53 54 54 55 56 57 58 58 59 60 61 62 63 63 64 65 66 68 69 69 70 71 71 72 7
22. accessories When you have unpacked your Intuos make sure that you have received the following items and accessories e Intuos Pro tablet e Pen e Pen holder with nib storage e Intuos wireless kit which includes battery wireless receiver and module e Installation CD e Quick Start Guide booklet e Extra pen nibs e Nib removal tool e Pen color rings e Power cord SYSTEM REQUIREMENTS Make sure your computer meets the following minimum system requirements e PC Windows 8 Windows 7 or Windows Vista 32 or 64 bit configurations One available USB port A CD ROM drive is required to install the driver from the Installation CD e Mac OS X v10 6 or later Intel based platforms only One available USB port A CD ROM drive is required to install the driver from the Installation CD Note You may also download and install the driver from the Wacom website for both Windows and Mac operating systems see Installing the driver Contents Index yy LJ C ore Contents INTUOS PRO TABLET Touch Ring Status LEDs Includes the Toggle Button at e AnLED will glow dimly when Intuos Pro is the center of the ring Press to connected to an active USB port e Toggle between Touch e An LED will brighten when you touch the active Ring modes area or use the pen Touch Ring or ExpressKeys e Wake tablet from sleep e LEDs also indicate which of the four Touch Ring mode when operating modes are active wirelessly Fo
23. closing the Radial Menu hold down the button that opens the menu Top menu Submenu AV EEHEHE 0 DR In the Wacom Tablet control panel use the RADIAL MENU tab to customize the available Radial Menu functions 1 2 3 Tips e Select a control slice Assign a control FUNCTION to the slice If desired change the LABEL name Select a menu or submenu to further customize Display Toggle In the FUNCTION menu choose SUBMENU to create custom submenus for a control slice e Press the ENTER RETURN key to add multiple lines of LABEL text Capture Menu Contents Index Window Radial Menu Function Keystroke Label Brush Panel Backward Please make sure you have a button set to Radial Default Returns the currently displayed menu to its default values taa yy LJ C ore Contents WORKING WITH DISPLAY TOGGLE Display Toggle is available when working on multiple monitor systems This feature allows you to work with your tablet on all displays or on one display at a time See Working with multiple monitors In the Wacom Tablet control panel the DISPLAY TOGGLE tab is automatically available when the Intuos pro tablet is installed on a multi monitor system This tab lets you set which monitor s will be included in the toggle sequence After setting an ExpressKey or pen side switch to DISPLAY TOGGLE you can use that button to sequentially
24. monitor returns the system Pen Mode and map to one of the checked displays to the base mapping Default Important When using application specific settings with DISPLAY TOGGLE be sure that each customized application in the APPLICATION list including ALL OTHER has a tool button assigned to DISPLAY TOGGLE The easiest way to do this is to assign DISPLAY TOGGLE to an ExpressKey prior to creating any application specific settings Any of the following actions will return the toggle sequence to the base mapping e Launching a graphics application that supports pressure sensitivity e Logging out of or rebooting the system e Switching users Fast User Switching e Placing the system in sleep mode e Changing the MAPPING or DISPLAY TOGGLE settings e Changing the resolution or number of displays on your system e Using the MODE TOGGLE function Selecting PEN MODE or MOUSE MODE from the Radial Menu Tip To toggle between monitors without including the full display option disable the first display on the DISPLAY TOGGLE tab Then go to the MAPPING tab and set the current SCREEN AREA to the first display Contents Index E le D 48 yy LJ C ore Contents APPLICATION SPECIFIC SETTINGS You can customize your tools for use with a particular application For example you may prefer a firm pen tip pressure setting in one application and a soft pressure setting in another The APPLICATION list enables you to add an ind
25. operate correctly within Photoshop verify that the ZOOM WITH SCROLL WHEEL function is not selected within the Photoshop PREFERENCES options Rotation gestures do not seem to work consistently or not at all Rotation may work differently depending on the application you are working with For example rotation may work smoothly in 90 degree increments or not at all For best recognition of this gesture start with your fingers positioned diagonally on the tablet surface and keep them at least 25 mm 1 inch apart WIRELESS CONNECTION PROBLEMS The computer does not have an available USB port Contents Check if there is an available USB port on a USB hub If not available add a USB hub or USB card Index yy LJ 0 ore Contents After pressing the power button on the wireless module a tablet status LED glows steadily for 4 seconds and then turns off If a wireless connection is not established the wireless module will turn off after 4 seconds e Make sure the wireless receiver is properly connected to an active USB port on your computer or USB hub e Move the tablet closer to the antenna and make sure there are no metal or other high density obstructions in the line of sight between the tablet and your computer Again press the power button to activate the connection After turning on the wireless module a status LED indicates good functionality but the screen cursor cannot be moved If your
26. sure to select the tablet unit you are testing from the TABLET INFO column 2 Slide your finger around the entire circumference of the Touch Ring As you touch and move your finger along the Touch Ring a LEFT TOUCH number will indicate your current finger position on the Touch Ring 3 Press the Toggle Button to toggle between the four customizable modes As you cycle between settings a corresponding LED should illuminate Within the DIAGNOSTICS dialog box the button mode is also shown as LEFT BUTTONS If any of the functions are set to SKIP the corresponding LED will be skipped in the toggle sequence 4 When you are done click on the CLOSE button to exit the dialog box Important Some applications can override and control the ExpressKey or Touch Ring functions Consider closing any open applications except the Wacom Tablet control panel when testing the Touch Ring For details see Using integrated applications Contents Index _ le D 69 QT LJ 0 ore Contents TESTING A PEN 1 With the DIAGNOSTICS dialog box open and while observing the POINTING DEVICE INFO column bring your Intuos Pro tool within 10 mm 0 4 inch of the tablet active area A value for PROXIMITY the DEVICE NAME DEVICE TYPE and a DEVICE S N serial number should be displayed If you have more than one tablet connected to your system be sure you have selected the TABLET for which you are testing your tools from the TABLET INFO column Move your too
27. sure you are using only a compatible Wacom pen such as the pen that shipped with your product or a Wacom accessory tool specified for use with Intuos Pro Other pens may not function properly on the tablet Check the control panel PEN tab and verify that a CLICK function is assigned to the tip A tablet status LED should brighten when the tip is pressed If not you may have defective hardware See Testing the tablet controls and tools Changing the settings of the Make sure you are changing the settings for the tool and application pen or other tool has no effect that you are using See Application specific settings and Working with multiple tools The pen side switch does not Be sure you are using only a compatible Wacom pen such as the pen work that shipped with Intuos Pro or a Wacom accessory tool specified for use with Intuos Pro Other pens may not function properly on the tablet Be sure to press the side switch when the pen tip is within 10 mm 0 4 inch of the tablet active area Do this without pressing down on the pen tip In the Wacom Tablet control panel verify that the side switch is set to the function you are expecting to occur for the application and tool you are using Check also the SIDE SWITCH MODE If CLICK amp TAP is selected you will need to first press the side switch while touching the pen tip to the tablet surface in order to perform a click function See Advanced options A tablet status L
28. the Touch Ring to zoom in most graphics applications and scroll in most other applications SCROLL Sets the Touch Ring for scrolling only action ZOOM Sets the Touch Ring for zooming only action SHOW DESKTOP Minimizes all open windows to display a clean desktop SWITCH APPLICATION Brings up the application switching dialog box with focus on the next open application On Windows 7 and Vista systems running Aero Flip 3D will be activated with focus on the next open application OPEN RUN Opens a dialog box where you can select a specific application file or script to launch Click BROWSE to locate an application Ramee file or script to launch The selection you make appears in the NAME box Click OK to accept the selection The dialog box will close and the OPEN RUN option you have selected will be assigned as your tool button option Simply press the tool button to launch the assigned option If your selection is for the Radial Menu it will be displayed there TOUCH ON OFF TOUCH ON OFF is useful when you are working with the pen and you want to exclusively use pen mode Temporarily disable touch by pressing an ExpressKey to which you have assigned the TOUCH ON OFF function Press the ExpressKey again to enable touch See also customizing the ExpressKeys INK TOGGLE Mac only Toggles the ink in any application function of Ink on and off Ink automatically
29. toggle the current tablet mapping between a base mapping the current setting from the MAPPING tab and other monitors For example 1 The entire display area of a multi monitor system is set up for extended mode and assigned to the active area of the Intuos Pro tablet 2 Pressing a tool button to which the DISPLAY TOGGLE function has been assigned toggles the tablet mapping to the next display in sequence Contents Index yy LJ 0 ore Contents All monitors are selected in the toggle Display Toggle sequence by default Uncheck any monitor you want removed from the Check one or more displays to toggle sequence e The base mapping is the tablet and display mapping that is defined in Current Setting from Mapping Tab the MAPPING tab a o Z Monitor 1 Cintiq 24HD By default this includes all monitors unless you have defined a specific oO A 5 v I inti monitor as your primary monitor a e As you toggle to the next monitor the active tablet area is mapped to that monitor in pen mode Toggling one more time after the last Please make sure you have a button set to Display Toggle When toggling all input tools use selected
30. tool Replacement nibs Side switch gt rocker style Intuos Pro Pen O If you are working in a multi user Repl ee environment or just want to eplacgabe nib personalize your pen unscrew the pen tip tip cone and replace the ring with a different color included Colored rings may not be available in all regions See Product information to learn more about which applications currently support the special features of your Intuos Pro Pen Contents Index yy LJ 0 cre Contents SETTING UP INTUOS PRO CONNECTING INTUOS PRO TO YOUR COMPUTER A USB cable for connecting the Intuos pro to your computer is provided e Connect the USB cable to the Intuos pro as shown e Connect the other end of the cable to a USB port on your computer When the connection is complete the Status LEDs will light white Touch the active area of the Intuos pro with your pen or your finger The Status LEDs will brighten USB CABLE INSTALLATION 1 The USB cable can be connected to suit your preferred handedness Right handed use e For right handed use connect the USB cable to the tablet as is r 5 i and press the cable into the looping clip LA e For left handed use make a loose loop located on the USB plug 2 Connect the other end of the cable to your computer Left handed use See also Installing the driver The tablet active area Control panel overview Contents Index
31. wireless receiver within 4 seconds If the receiver is not found then the tablet enters sleep mode e USB connection deactivates wireless mode and activates USB mode Notes Pairing is not required The wireless module and Wacom wireless receiver are factory paired and work together as a discrete set Intuos Pro can operate wirelessly for up to 10 meters 33 feet away from your computer It is not necessary for Intuos Pro to be in sight of the wireless receiver The wireless module uses radio frequency technology which can pass through non metallic objects like desks Interference from other devices especially audio devices or metallic objects located in or along the line of sight can negatively impact the tablet performance and operating distance If you experience connection problems see Optimizing the wireless connection When starting up your computer wait until your operating system has completely loaded and then turn on the wireless module if not already on to begin working wirelessly Important The use of wireless devices is regulated in most countries If Intuos Pro is configured for wireless operation and you will be traveling check with the appropriate regulatory authority for any restrictions that may apply to your product in the countries that you visit Contents Index E le D 56 yy LJ 0 ore Contents A Products using wireless signals may interfere with the equipment on commercial aircraft and
32. your displays by pressing an ExpressKey or pen button that is set to DISPLAY TOGGLE Verify that the SCREEN AREA in the MAPPING tab is set to FULL You can also use your pen to control the other monitors in mouse mode To use mouse mode first set a pen button to MODE TOGGLE Then use the button to toggle between PEN MODE and Mouse MODE Enable touch by pressing an ExpressKey that is set to TOUCH ON OFF Otherwise open the Wacom Tablet control panel click on the TOUCH icon and go to the STANDARD GESTURES MY GESTURES or TOUCH OPTIONS tab Be sure the ENABLE TOUCH option is selected Touch does not seem to fully work The screen cursor can be moved but more complex actions or gestures do not work If the tablet driver does not load properly basic touch movement will be recognized but other actions and gestures will not Install the driver software for the tablet The tablet does not reliably recognize multi finger touch If you hold your fingers too close together the tablet may not recognize them as being separate Try moving your fingers a little further apart Cannot zoom in or zoom out when working with Adobe Photoshop If zoom functions do not operate correctly within Photoshop verify that the ZOOM WITH SCROLL WHEEL function is not selected within the Photoshop PREFERENCES options Scrolling and panning gestures do not function correctly when working with Adobe Photoshop If touch gestures do not
33. 4 74 77 78 80 80 80 QT LJ 0 ore Contents APPENDIX 81 Replacing the pen nib 81 Uninstalling Intuos Pro 82 Installing multiple tablets 83 Using integrated applications 83 Importing expert settings 84 Using the optional Airbrush and Art Pen 85 Using the optional mouse 86 Customizing the mouse 87 Testing the mouse 89 Pen and digital ink capabilities in Windows 90 Product information 91 Ordering parts and accessories 91 Warranty Service 92 Warranty Service in the U S and Canada 92 Warranty Service Outside of the U S and Canada 92 GLOSSARY 93 INDEX 96 Contents Index yy LJ 0 ore Contents ABOUT THE MANUAL This manual provides quick access to information about your Intuos Pro The information is common to Windows and Mac computers and Windows screen captures are shown unless otherwise noted e Go directly to Table of Contents or Index topics by clicking on them e Use the navigation controls to move through the manual fi Go to front page Contents Go to table of contents Page back or page forward Index Go to index Go back to previous view e Use your pdf viewer zoom in tool to increase the size of the manual on your display screen See the viewer application help for information on any additional tools that help you use and print the manual e SMALL CAPITAL LETTERS are used for names of keyboard keys dialog boxes and control panel options e Be sure to read the Important Product In
34. Contents User s manual Intuos Pro PTH 451 PTH 651 PTH 851 Setting up Intuos Pro Using the Pen Tablet controls The Intuos pro multi touch experience Customizing Intuos pro Application specific settings Working with multiple tools Going wireless with Intuos pro Troubleshooting Wo CO Mm Contents index QT LJ 0 ore Contents Intuos pro User s Manual Version 1 0 Rev J3113 Copyright Wacom Co Ltd 2013 All rights reserved No part of this manual may be reproduced except for your express personal use Wacom reserves the right to revise this publication without obligation to provide notification of such changes Wacom does its best to provide current and accurate information in this manual However Wacom reserves the right to change any specifications and product configurations at its discretion without prior notice and without obligation to include such changes in this manual The above year indicates when this manual was prepared However the date of release to the users of the manual is simultaneous with the introduction into the market of the applicable Wacom product Intuos and Wacom are registered trademarks of Wacom Co Ltd Adobe and Photoshop are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and or other countries Microsoft Windows and Vista are either registered trademarks or trademarks of Microsoft Corporation in the United St
35. ED should brighten when you press the side switch If not you may have defective hardware See Testing your tablet The screen cursor jumps Do not place an Intuos Pro tool on the tablet when it is not in use or back when you are using another pointing device Leaving your tool on the tablet may interfere with screen cursor positioning when using other input devices You cannot move the cursor Open the Wacom Tablet control panel and go to the MAPPING tab where you want to on the Verify that PEN MODE is selected and that the SCREEN AREA is set to screen or the line you are FULL for the selected tool and application If this does not help click on drawing does not line up with the DEFAULT button to reestablish tablet to screen mapping If you are the location of the pointer in still having difficulty remove the tablet preferences see Windows paint applications specific problems or Mac specific problems Confirm whether the pen does or does not function See Testing the tablet controls and tools Contents Index yy LJ 0 ore Contents When using the pen to operate the Touch Ring the Touch Ring does not work well The Touch Ring is designed to be used with your finger and does not work with the pen tip When using Intuos Pro on a multiple monitor system you cannot use the pen to control the other monitor s TOUCH PROBLEMS Touch does not work Cycle pen control for Intuos Pro between
36. H AND ART PEN The optional Intuos Pro Airbrush works like the Grip Pen and includes a fingerwheel for additional control Hold the Airbrush with your thumb and middle finger The fingerwheel should be in a convenient location for you to roll it with your index finger Tilt the Airbrush for a comfortable position that allows you to paint and draw with pressure sensitivity You can simulate realistic airbrushing with the proper software support For example apply pressure on the tip to control the brush size Tilt the Airbrush to elongate and feather the spray pattern Roll the fingerwheel to adjust the spray intensity Side switch Default settings Eraser Windows RIGHT CLICK Mac DOUBLE CLICK Fingerwheel Roll the fingerwheel backwards to increase ink flow or brush size and forward to reduce it Your index finger should operate the wheel independently of the pressure you apply to the tip Replaceable nib The optional Intuos Pro Art Pen responds to the pressure tilt and rotation you apply to the pen Eraser Does not support rotation Side switches Default settings Upper DOUBLE CLICK Lower RIGHT CLICK The Art Pen supports 360 degrees of rotation around the pen axis As you draw within an application that supports rotation sensitivity simply twist the Art Pen to create lines that narrow or broaden While painting you can vary the rotation of a non circular brush to change the stroke thick
37. ICKS option to simulate pressing a button of the selected type on a mouse Middle Ctrl Right Cancel RADIAL MENU Displays the Radial Menu on your screen Each level of the hierarchical menu consists of eight menu slices which may contain various features and options to choose from BACK Simulates the BACK command in browser applications FORWARD Simulates the FORWARD command in browser applications PAN SCROLL Enables you to position a document or image in any direction within the active pane Do this by pressing a pen button set for PAN SCROLL and then dragging with the pen tip across the tablet active area When you select PAN SCROLL you are Pen Scroll Speed _ prompted to set a scrolling speed for use in applications that do not support grabber Paepe hand pixel level panning A slower setting reduces the scroll rate Slow Fast and is useful for close up and detail work where you need precise control of the image Note The Pen Scroll Speed does not affect applications that pan with a grabber hand Cancel As you move the pen tip the document or image is repositioned to follow the direction of pen movement on the tablet Release the button or lift the pen tip from the tablet surface when you are done oao O oomo j Contents Index E le D 41 I ITUOS Contents FUNCTION NAME DESCRIPTION AUTO SCROLL ZOOM Sets
38. ING WITH TILT The tablet recognizes when you tilt the pen from vertical to incline positions Tilt can be used to control line shape and thickness in supporting applications This is like working with an airbrush where tilt can be used to make a line thin when the tool is vertical or wide when the tool is tilted In other applications you can adjust tilt to define brush characteristics such as width color and opacity You can adjust the brush characteristics within your application to create different effects To adjust the amount of pen tilt required to produce a desired effect in your application see Customizing the pen WORKING WITH PRESSURE SENSITIVITY The pen responds to the nuance and inflection of your hand movements enabling you to create natural looking pen and brush strokes within applications that support this feature To draw ink or write with pressure sensitivity move the pen inside the active area while applying various amounts of pressure downward on the tip of the pen Press hard for thick lines or dense color Press gently for thin lines or softer color Some applications require that you first select a pressure sensitive tool from the application tool palette To adjust tip feel see Adjusting tip feel and double click Visit the Wacom website to learn about applications that support pressure See Product information Contents Index yy LJ C ore Contents USING THE SIDE SWITCH The pen side switch
39. M or ADD OR REMOVE PROGRAMS 3 Select WACOM TABLET and click on the REMOVE button Windows 7 and Vista 1 Click START and choose CONTROL PANEL 2 Click UNINSTALL A PROGRAM or ADD OR REMOVE PROGRAMS 3 Select WACOM TABLET and click on the REMOVE button Note You may need to reboot your computer for the uninstall to take effect Mac 1 From the Go menu choose APPLICATIONS and open the WACOM TABLET folder 2 Double click on the WACOM TABLET UTILITY icon Click on the TABLET SOFTWARE REMOVE button Enter your administrator log on name and password 3 After the removal is completed click OK See for information on downloading a new software driver when available from the Wacom website Contents Index E le D 82 QT LJ C ore Contents INSTALLING MULTIPLE TABLETS e Any tablet that has been detected on your system will appear as an icon within the Wacom Tablet control panel TABLET list Select a tablet icon for which to customize tool and application settings e The control panel will not launch unless a supported tablet is connected to the Tablet Tool lt lt Intuos4 S Functions Intuos pro M Touch rA Grip Pen computer e Settings can only be viewed or changed for an attached tablet Saul eo Qe gt Illustrator mspaint Application A All Other To add a new tablet connect it to your computer The system will automatically find the ta
40. Note that you may not be able to recharge the battery after 6 continuous months of non use You will need to purchase a new battery when it is no longer capable of holding an adequate charge or can no longer be charged See Ordering parts and accessories A Warning See the Important Product Information guide for battery safety precautions Contents Index E le D 61 QT LJ 0 ore Contents BATTERY REPLACEMENT If your tablet battery has exceeded its life span and can no longer be charged or no longer holds a charge it will need to be replaced Be sure to use only the rechargeable battery designed for your tablet For information see Ordering parts and accessories Important Only use a Wacom battery specified for your tablet To replace the rechargeable battery 1 Turn the tablet over Remove the wireless compartment cover Medium and large sized tablets are equipped with two covers one for the Wacom wireless module and one for the rechargeable battery Small sized tablets come with a single cover Slide cover away from tablet body to remove 2 Carefully remove the old battery as shown below 3 Install the new battery Align the terminals of the new battery with the tablet contacts as shown below Press the battery into the compartment 4 Replace the wireless compartment cover Align and slide into place 5 Connect the USB cable and charge the battery for optimum performance See Charging the battery Remove o
41. OSE to exit the dialog box Contents Index _ le D 89 qT LJ 0 ore Contents PEN AND DIGITAL INK CAPABILITIES IN WINDOWS Microsoft Windows provides extensive support for pen input Pen features are supported in all versions of Windows except Windows 7 Starter and Home Basic and Windows Vista Home Basic e Note taking Jot notes and capture quick sketches in Windows Journal Use the Journal search engine to locate your handwritten content e Handwriting recognition Quickly enter handwritten information anywhere the computer accepts typed input Convert your handwritten content to typed text at any time e Gestures Make simple gestural movements on the tablet to trigger customizable actions To customize gestures select the FLICKS tab in the Windows 8 or Windows 7 PEN AND TOUCH or Windows Vista PEN AND INPUT DEVICES control panel e Digital Ink in Microsoft Office 2007 or later Utilize the enhanced digital mark up and inking tools found on the Review tab within applicable applications The Windows Input Panel enables you to use handwriting or an on screen keyboard to directly enter text with your Wacom pen There are different ways to launch the Input Panel e Click on the Input Panel icon which appears when you move the screen cursor into a text entry area e Click on the Input Panel tab located by default on the left edge of the display screen e Click on the Tablet PC Input Panel icon located on the Windows Taskbar I
42. TESTING THE WIRELESS CONNECTION A tablet status LED should glow whenever the tablet is properly connected and your computer has recognized it as a USB device If you encounter problems with the wireless connection perform the following checks 1 First check the general Troubleshooting procedures 2 Verify that the wireless module is on See Battery and wireless connection status 3 Verify that the wireless module and receiver are properly installed See Wireless setup 4 Check the battery power See Battery and wireless connection status If the battery charge is low connect the USB cable and charge the battery See Charging the battery Switch the wireless module off and then back on 6 Move the tablet closer to the computer Make sure there are no metal or other high density obstructions in the line of sight between the tablet and computer 7 Open the Wacom Tablet control panel and click on the ABOUT button In the dialog box that appears click DIAGNOSE The DIAGNOSTICS dialog box shows dynamic information about the tablet Check the WIRELESS MODE entry to determine if the wireless status is ON When you are done click the CLOSE button to exit the dialog box o If these tests fail you may have defective hardware See Contents Index _ le D 64 yy LJ 0 Cree Contents TROUBLESHOOTING If you are having trouble Wacom recommends you do the following 1 If the tablet driver failed to load properl
43. Toggle Application specific settings Working with multiple tools Changing the tablet mode Advanced options To open the Wacom Tablet control panel e Windows 8 From the Windows 8 Start screen right click in the screen s bottom left corner and choose CONTROL PANEL from the pop up menu If you are using Windows 8 Classic Desktop press the Windows key on your keyboard or select the Windows icon in the Charms bar to access the Start screen e Windows 7 and Vista Click on the Windows START button and choose ALL PROGRAMS then select WACOM TABLET and choose the WACOM TABLET PROPERTIES option e Mac Open SYSTEM PREFERENCES from the Apple menu or from the APPLICATIONS folder Then click on the WACOM TABLET icon You can begin customizing Intuos pro after opening the control panel The control panel displays only those tabs and options that apply to your current tablet model and configuration See Control panel overview Note User specific preferences are supported After logging on each user can customize their personal settings in the Wacom Tablet control panel Switching to another user will automatically load the settings for that user Contents Index E le D 28 QT LJ 0 ore Contents CUSTOMIZING THE PEN You can easily customize the pen Use the pen to open the Wacom Tablet control panel The pen will be selected in the TOOL list and the appropriate tabs will be displayed If not automatically selected
44. ab An interface standard used by Windows applications for receiving tablet information Intuos Pro supports all Wintab compatible applications under Windows Contents Index _ le D 95 QT LJ 0 ore Contents About the manual Accessories and parts ordering Active area understanding Adding a new tool Airbrush holding replacing the tip using Application specific settings creating removing Art Pen using Button functions Care and maintenance Control panel features lists tabs Controls testing Customizing double click eraser feel advanced ExpressKeys mouse buttons fingerwheel pen Radial Menu tablet ExpressKeys Touch Ring tablet to screen mapping tip feel advanced tool buttons touch custom functions Touch Ring Diagnostics Display Toggle working with Double click customizing Driver downloads obtaining Eraser feel Contents INDEX Index advanced customizing Expert settings importing Express View display ExpressKeys customizing testing using Features control panel pen pen stand Force proportions Functions button General problems troubleshooting Holding Airbrush pen Information product Installing multiple tablets Intuos pro about your tablet setting up the touch experience using Mac specific problems troubleshooting Maintenance and care Manual about Mapping to multiple monitors Mouse buttons customizing fingerwheel customizing using testing using Mouse mode Multiple
45. ablet active area Touch options can be individually enabled or disabled within the Wacom Tablet control panel Touch is on when selected in the TOUCH OPTIONS tab See Setting the touch options e Use basic actions to navigate and perform typical mouse operations e Use gestures to scroll Zoom rotate and perform other functions Some gestures may provide a visual cue on your display screen to indicate when the gesture has been recognized by Intuos pro Some functions such as a right click Saute EY E can be performed using different ena a My Gestures actions or gestures F a Position the screen cursor over a a touch option to see a static image of WW Tap to click that function L Drag If you do not choose a specific option to view the control panel will display Two Fingers each option sequentially from top to Add tap to click bottom T Tap to right click Three Fingers This option can also be changed by 7 Swipe left right to navigate Drag z assigning it fo an EXDIGSSh ey 7 Scroll a See also Navigating with touch and Natural V Swipe left right to switch application Choosing custom touch functions Fi Zoom vV Rotate Default _ Windows screen capture shown Available options may vary depending on your operating system and version You can also e Customize your touch experience and also customize the ExpressKeys to perform some touch functions e Select the TOUCH icon in t
46. ately 0 to 60 Now move the tool to the left of vertical the X TILT value should change from approximately 0 to 60 Test tilt for the y axis by moving the pen from a vertical position toward the bottom of the tablet the Y TILT value should change from approximately 0 to 60 Now move the tool toward the top of the tablet the Y TILT value should change from approximately O to 60 For the optional Art Pen test the rotation feature by placing the pen tip on the tablet surface and slowly rotating the pen on its axis The ROTATION value should change as you rotate the pen When you are done click on the CLOSE button to exit the dialog box Contents Index a a 4 D 70 yy LJ 0 ore Contents TROUBLESHOOTING TABLES If you encounter problems with your Intuos Pro tools or tablet see the following tables Your problem may be described here and you can try the solution offered For additional information visit the Support page of the Wacom web site at http wacom com General problems Pen problems Touch problems Wireless connection problems Windows specific problems Mac specific problems GENERAL PROBLEMS The computer does not have Check if there is an available USB port on a USB hub If not available an available USB port you will need to add a USB hub or USB card A tablet status LED does not Verify that the tablet USB cable is properly connected to the tablet and illuminate to an active USB port
47. ates and or other countries Apple the Apple logo and Mac are registered trademarks of Apple Inc registered in the U S and other countries Any additional company and product names mentioned in this documentation may be trademarked and or registered as trademarks Mention of third party products is for information purposes only and constitutes neither an endorsement nor a recommendation Wacom assumes no responsibility with regard to the performance or use of these products ExpressKey is a registered trademark of Ginsan Industries Inc and is used with permission Contents Index a a 4 gt 2 QT LJ 0 ore Contents TABLE OF CONTENTS TABLE OF CONTENTS ABOUT THE MANUAL ABOUT YOUR INTUOS PRO TABLET System requirements Intuos Pro tablet Intuos Pro Pen SETTING UP INTUOS PRO Connecting Intuos Pro to your computer USB cable installation Installing the driver Configuring the tablet orientation The tablet active area Working with multiple monitors Control panel overview USING INTUOS PRO Setting up your work area Using the Pen Holding the pen Positioning Clicking Erasing Dragging Working with Tilt Working with pressure sensitivity Using the side switch Tablet controls Application specific Expresskey defaults Using the Expresskey display Using the Touch Ring Control panel THE INTUOS PRO MULTI TOUCH EXPERIENCE Navigating with touch Setting the touch options Choosing custom touch functions CUSTOMIZING INTUOS
48. ation Contents Index QT LJ C Cree Contents BATTERY AND WIRELESS CONNECTION STATUS When in wireless mode Intuos Pro provides you with additional feedback about your tablet e A tablet status LED shows the following Flashing Wireless mode connecting On Wireless mode on Off Sleep mode or wireless mode off e On the Wacom wireless module the battery status LED shows the following Amber USB cable connected and tablet battery charging Green USB cable connected and tablet battery fully charged Off USB cable connected tablet is in USB suspend mode or USB connecting state USB cable disconnected no charging activity USB cable disconnected operating wirelessly e A battery status icon appears in the system task bar Windows or menu bar Mac Hover the screen cursor over the icon to learn specific details e When configured for wireless operation you can view the tablet battery status and wireless control options using the Wacom Tablet control panel Open the control panel click FUNCTIONS and select the WIRELESS tab Wireless Adjust slider to determine when your tablet will switch to power saving mode Battery Switch to power saving mode 2 minutes use and shows an approximation of the battery charge remaining e A power plug symbol indicates tablet is running on external power through the USB cable and the tablet battery is charging e Acheck mark symbol indicates battery i
49. ations or Touch Ring perform a different function than what is set in the Wacom Tablet control panel PEN PROBLEMS The pen does not position the If the tablet driver does not load properly pen input will not be screen cursor or otherwise available work properly If using application specific settings be sure you have updated the settings for the application you are working with e You will be able to use the pen tip to move the screen cursor and click but there will be no other pen functionality e For tablet models that combine pen input and touch basic touch movement will continue to be recognized but other actions and gestures will not Install the driver software for the tablet The pen does not draw or ink Some applications require that you turn on the pressure capabilities with pressure sensitivity within the application or the selected tool before the pen will respond as a pressure sensitive tool Verify also that your application supports pressure sensitivity Clicking is difficult Try using a lighter TIP FEEL See Adjusting tip feel and double click Double clicking is difficult Be sure you are quickly tapping the tablet twice in the same place on the tablet active area Wacom recommends using the side switch to double click Open the Wacom Tablet control panel and go to the PEN tab Try increasing the TIP DOUBLE CLICK DISTANCE or using a lighter TIP FEEL Set an ExpressKey to DOUBLE CLICK an
50. ations that currently support the advanced features of these tools Contents Index E le D 29 yy LJ C ore Contents ADJUSTING TIP FEEL AND DOUBLE CLICK To adjust the tip sensitivity of your pen select the PEN tab The TIP FEEL slider customizes the amount of pressure needed to click draw or ink To create broad brush strokes or to click with i a light touch use a SOFT tip setting For maximum control while drawing thin lines use a FIRM tip setting Tip Feel Tilt Sensitivity Soft Firm Normal High Click to further customize the tip sensitivity t _ Customize Current Pressure With your screen cursor positioned over an __ Double Click x empty area of the control panel press Click Full down on the tablet with the pen tip Use the pressure bar to determine how hard Right Click 4 you must press on the pen to reach Tip Double Click Distance maximum pressure g off Large Click Default Adjusts the size of the double click area Drag slider to OFF if you do not want double click assist R e Usea soft TIP FEEL for a wider range of pressure values in most pressure sensitive applications e n some applications a soft pressure setting can make the pen overreact so that slight pressure on the pen will be magnified on the screen If you experience this try a firmer TIP FEEL setting e To make double clicking easier expand the tap area that accepts a double click
51. ay appear e To back up your preferences select CURRENT USER then click BACKUP e To restore preferences that you had previously backed up select CURRENT USER then click RESTORE e To remove preferences select Current User or All Users then click REMOVE Note Administrator rights are required to delete preferences for all users Cc D Tablet Preference File Utili My Preferences All User Preferences Cancel Contents Index E le gt 53 yy LJ 0 ore Contents GOING WIRELESS WITH INTUOS PRO Intuos Pro tablets are designed to let you go wireless by adding the Wacom wireless accessory kit WIRELESS ACCESSORY COMPONENTS The Wacom wireless accessory kit includes the following components Power button N Wacom wireless module Wacom wireless receiver Plugs into Intuos Pro tablet Plugs into computer When not in use can be stored within the Intuos Pro tablet See Wireless receiver storage Battery status LED Rechargeable battery Lithium lon Li lon Installs within the Intuos Pro tablet A Warning See the Important Product Information guide for safety precautions Located on the Intuos Pro installation CD Note The wireless module and receiver are factory paired If lost or broken you will need to purchase a new wireless accessory kit The battery can be purchased separately To install the kit see Wireless setup Wireless setup Batter
52. blet and initialize it An icon for the tablet will then appear in the control panel Important When installing additional tablets on Windows systems the eraser function may not work in some applications when using the additional tablet s The eraser function will continue to work correctly using the first tablet that was added to the control panel To remove one of multiple tablets from the driver select the tablet to be removed and click on the button next to the TABLET list e A tablet must be attached to the computer before it can be deleted from the control panel list e You will need to restart your computer before you can again add the tablet to the driver USING INTEGRATED APPLICATIONS Some software applications may be designed to directly control ExpressKey or Touch Ring function s When working in an application that has been integrated in this manner the ExpressKeys or Touch Ring may perform differently than the function that is set in the Wacom Tablet control panel e When an ExpresskKey is overridden by an application the ExpressKey setting will automatically update using either Application Defined or the new function name Some or all of the ExpressKeys may be overridden depending on the application e When an application overrides the Touch Ring all Touch Ring modes are affected If an application overrides only some of the available Touch Ring functions the remaining mode s are set to SKIP e
53. can reconfigure Intuos pro for left or right handed users at any time ExpressKey and Touch Ring settings are automatically reconfigured when you change the handedness setting Right handed operation e Open the Wacom Tablet control panel and select the MAPPING tab See Control panel Choose the EXPRESSKEYS LEFT orientation option The tablet driver automatically configures all aspects of the tablet including the Wacom Tablet control panel options for correct right handed use e Next physically rotate your tablet so the tablet ExpressKeys are positioned to the left See also The tablet active area Left handed operation e Open the control panel and select the MAPPING tab Choose the ExPRESSKEYS RIGHT orientation option The tablet driver automatically configures all aspects of the tablet including the Wacom Tablet control panel options for correct left handed use e Next physically rotate your tablet so the tablet ExpressKeys are positioned to the right See also The tablet active area Verify that you have correctly set the orientation by moving the pen upwards on the tablet To work with a tall monitor e Choose EXPRESSKEYS TOP to work with the tablet rotated 90 degrees clockwise The Touch Ring and ExpressKeys are oriented toward the top Choose EXPRESSKEYS BOTTOM to work with the tablet rotated 90 degrees counter clockwise The Touch Ring and ExpressKeys are oriented toward the bott
54. ch options Choose GRIP PEN to customize your pen settings The icon is available after you have used a pen on the tablet Different tools may be named differently Returns the selected tab to its default settings Downloads or displays this manual e Windows 8 From the Windows 8 Start screen right click in the screen s bottom left corner and choose CONTROL PANEL from the pop up menu If you are using Windows 8 Classic Desktop press the Windows key on your keyboard or select the Windows icon in the Charms bar to access the Start screen e Windows 7 and Vista Click on the Windows START button and choose ALL PROGRAMS then select WACOM TABLET and choose the WACOM TABLET PROPERTIES option e Mac Open SYSTEM PREFERENCES from the Apple menu or from the APPLICATIONS folder Then click on the WACOM TABLET icon Contents Index yy LJ C ore Contents Tool Tips are available for most control panel items Position the screen cursor over an item and let it rest there The appropriate Tool Tip will pop up in a few moments Your keyboard tab and arrow keys can also be used to navigate the control panel See Customizing Intuos pro Control panel lists and tabs The control panel TABLET TOOL and APPLICATION lists allow you to select the tablet tool or application for which you want to change settings Thio Tair is Gebiay sian icon frany gt viacn TPs mee supported tablet or pen display that has been
55. choose the pen from the TOOL list Select a tab and choose from the available options Adjusting eraser feel Customizing the pen Customizing tool buttons Adjusting tip feel and double click Advanced tip and eraser pressure settings Application specific settings Wacom offers a number of optional pens such as the Art Pen and Airbrush that are compatible for use with Intuos pro e The Art Pen features a pressure sensitive tip and eraser as well as sensitivity to tilt and rotation Rotating the barrel in supporting applications creates a unique effect e The Airbrush is a true digital airbrush It features a pressure sensitive tip and eraser tilt sensitivity anda fingerwheel to control the application of digital paint These tools are fully supported in the Wacom driver software They will appear in the TOOL list of the Wacom Tablet control panel after you touch the tablet surface with the tip of the tool The control panel will automatically update to show the new tool and the options available for customization In supporting applications you can adjust the functionality of the Art Pen rotation or the Airbrush fingerwheel within the application See the documentation that came with your application for details To learn more about these and other optional tools that can be used with Intuos pro visit http Awacom com and choose the Wacom web site for your region On the web site you can also learn about applic
56. d category that typically describes handwritten content which has been created using pen based input on a computer This handwritten content takes the form of sketches ink mark up or handwriting The handwriting can optionally be converted to typewritten text or simply left alone for use in its original format Depending on your system and applications settings the handwritten text you make with digital ink can be converted on the fly or at another time Display Toggle An Intuos Pro feature that allows you to work with your tablet on all displays or on one display at a time Available only on multiple monitor systems See working with Display Toggle Double click assist A function of the Wacom Tablet control panel that makes it easier to double click by setting the size of the double click distance Double click distance The maximum distance in screen pixels that the screen cursor can move between clicks and still be accepted as a double click Increasing the double click distance makes double clicking easier but may cause a delay in brush strokes in some graphics applications Double click soeed The maximum time that can pass between clicks and still be accepted as a double click Eraser aware application A software application that has built in support for the pen eraser These applications take advantage of the eraser in different ways depending on what makes sense for the application Expand A motion used when Navigat
57. d use it to issue double clicks Windows Try setting your system to launch programs with a single click See Clicking The pen selects everything Open the Wacom Tablet control panel and go to the PEN tab Move the will not stop drawing TIP FEEL slider toward FIRM or select CUSTOMIZE and increase the CLICK THRESHOLD setting If this does not help see Testing the tablet controls and tools The pen nib may be worn See Replacing the pen nib The eraser selects everything Open the Wacom Tablet control panel and go to the ERASER tab or will not stop erasing Move the ERASER FEEL slider toward FIRM or select CUSTOMIZE and increase the CLICK THRESHOLD setting If this does not help see Testing the tablet controls and tools You notice a screen delay at Open the Wacom Tablet control panel and go to the PEN tab the beginning of pen or inking Try decreasing the T P DOUBLE CLICK DISTANCE If that does not work strokes move the TIP DOUBLE CLICK DISTANCE slider to the OFF position in order to turn off double click assist Try turning off the operating system inking features Contents Index E le D 72 yy LJ 0 ore Contents You have to press hard with Open the Wacom Tablet control panel and go to the PEN tab Move the the pen when clicking TIP FEEL slider toward SOFT or select CUSTOMIZE and decrease the drawing or writing SENSITIVITY and CLICK THRESHOLD settings The pen tip does not function Be
58. driver software 6 Check the ExpressKeys See Testing the tablet controls and tools and testing the ExpressKeys 7 Check the Touch Ring See Testing the tablet controls and tools and testing the Touch Ring Check any other tool s such as the optional Mouse for Intuos Pro See Testing the tablet controls and tools If any of these tests fail you may have defective hardware See After testing use the Wacom Tablet control panel to reconfigure your tablet and tools for any custom settings you may originally have been using Contents Index _ le gt 67 QT LJ 0 ore Contents TESTING THE TABLET CONTROLS AND TOOLS If your Intuos Pro tools or tablet controls do not work as you expect it is a good idea to first check the assigned functions or reset them to their default conditions You will also want to do this if you have a touch sensitive tablet model and encounter problems with touch A quick way to return a tool to its default condition is to remove it from the control panel TOOL list Do this by selecting the tool and clicking on the TOOL list button After the tool has been removed place it back onto the tablet surface The tool will be added back to the TOOL list with its default settings e Open the Wacom Tablet control panel and click on the ABOUT button In the dialog box that appears click DIAGNOSE The DIAGNOSTICS dialog box shows dynamic information about the tablet your tool s and appropriate inf
59. e Genista tablet moves the screen cursor up In this mode the entire active area of the tablet is available for mouse tracking Mouse Acceleration Mouse Speed e When USE MOUSE ORIENTATION is selected moving the mouse forward moves the screen cursor up In this mode a reduced 2 piled yeaa Sie eso inset portion of the active area is available Off High Slow Fast for mouse tracking This is the default setting for the Intuos pro tablet Default Sets the screen cursor acceleration Select a slower or faster screen cursor tracking speed Notes You can switch between pen mode and mouse mode using the Radial Menu If you frequently switch between pen mode and mouse mode you can assign the MODE TOGGLE function to one of your tool buttons Contents Index _ le B 88 yy LJ C Cree Contents TESTING THE MOUSE 1 Use the Wacom Tablet control panel to open the DIAGNOSTICS dialog box See Testing the tablet controls and tools 2 With the DIAGNOSTICS dialog box open place the Mouse on the tablet active area and test by clicking each mouse button A tablet status LED should brighten and the SWITCHES state should change for each button you click Wacom 3 When the DIAGNOSTICS dialog box is first opened the WHEEL status should be 0 Move the fingerwheel backward The WHEEL status should change from 0 to 1 4 Move the fingerwheel forward The WHEEL status should change to 1 5 When done click CL
60. e displayed The TOOL list displays an icon for the tablet fools that have bec iced E O sissies tools that have been used Aad on the tablet l The TOUCH icon is available Tablet for touch sensitive tablets uct pe See Setting the touch i F A 7 J i Took lt J options ool f b rA gt Functions Art Pen If application specific T settings have not been Application lt A added the ALL icon is All Other Illustrator Photoshop displayed and the tool settings apply to all Removes the selected tool The button is inactive when there is only one item in applications the list The FUNCTIONS and ToucH icons cannot be deleted Select a tool to change its settings To add a different tool to the TOOL list simply use the tool on your Intuos pro tablet e When you select a tool that has been added to the TOOL list the appropriate tab settings for that tool are displayed Any changes you make to the tab settings will then apply to the tool e fa similar tool was previously added the new tool will inherit the settings of the previously added tool These settings can then be customized for the newly added tool Identical tools will use the same settings To remove a selected tool from the Too list click on the TooL list button In the dialog box that appears click DELETE to confirm your selection The selected tool is removed from the list along with any custom settings you
61. e the problem You can also contact Wacom Support by visiting the Wacom web site for your region and completing an Email Inquiry form OBTAINING SOFTWARE UPDATES Wacom periodically updates the tablet software driver to maintain compatibility with new products If you are having a compatibility problem between Intuos and a new hardware or software product it may be help to download a new software driver when available from the Internet Visit http wacom com for support product drivers or other software updates CARE AND MAINTENANCE Keep the pen and the Intuos surface clean Dust and dirt particles can stick to the pen and cause excessive wear to the surface Regular cleaning will prolong the life of your surface and pen Store your Intuos and pen in a clean dry place and avoid extremes in temperature Room temperature is best for tablet use and storage Do not disassemble the Intuos or the pen Taking apart the product will void your warranty Important Take care to never spill liquids onto the Intuos or the pen Be especially careful of getting the display ExpressKeys or pen buttons and pen tip wet as they contain sensitive electronic parts that will fail if they are exposed to liquids Avoid scratching the Intuos Pro with a worn pen nib by replacing your nibs frequently See Replacing the pen nib To clean the Intuos Pro or the pen use a soft damp cloth You can also dampen the cloth using a very mild soap diluted wit
62. ea to first back up your tablet preferences In the TABLET PREFERENCE FILE UTILITY dialog box click BACKUP and follow the prompts e Then use the Tablet Preference File Utility to delete the tablet preferences as follows Single user Under My PREFERENCES click REMOVE to delete the preferences for the current user Multiple users Under ALL USER PREFERENCES click REMOVE to delete preferences for multiple users Administrator rights are required to delete preferences for all users Relaunch any currently open tablet aware applications that you may be running You can quickly restore tablet preferences that have been backed up by clicking RESTORE under My PREFERENCES Contents Index yy LJ C S Contents MAC SPECIFIC PROBLEMS At startup a dialog box The tablet was not detected at startup appears telling you that either the driver failed to load or the tablet preferences have not e Make sure the wireless connection is active See Battery and yet been created wireless connection status e From the Go menu select UTILITIES and launch the SYSTEM PROFILER Select USB from the HARDWARE section of the CONTENTS list A Wacom USB tablet model should be listed If a tablet model is not listed check the wireless connection If using a wireless connection If connected with the provided USB cable e Make sure the USB cable is securely connected to an active USB port on your computer or USB hub Check to be sure tha
63. een cursor lags behind the pen movement on the tablet or frequently jumps about or if you see excessive straight line segments when drawing in graphics applications then your wireless connection may not be able to transmit all of the data from the tablet with the necessary speed This may be caused by interference from other radio sources obstructions in the radio wave path excessive distance from the computer or a combination of the above To improve the wireless connection and optimize tablet performance e Remove any metallic objects that may be in the line of sight between Intuos Pro and the Wacom wireless receiver attached to your computer e Try connecting the wireless receiver to a USB extension cable and place it on your desktop or somewhere in sight of Intuos Pro e Move the tablet closer to your computer e Switch off any other devices operating in the 2 4 GHz radio spectrum such as mobile telephones etc or move their antennas further away from your computer Contents Index QT LJ 0 ore Contents BATTERY AND POWER MANAGEMENT This section contains important information about the rechargeable battery and power management features of your Intuos Pro tablet when used wirelessly Be sure to review the following sections Charging the battery Battery and wireless connection status Power saving features CHARGING THE BATTERY Fully charge the tablet battery before using Intuos Pro for the first time in wire
64. er suitable non metallic tool to unseat the module You can also use the wireless module spacer that came with your Wacom wireless accessory kit Place the spacer over the wireless module Use it as a hook to unseat and slide the wireless module out of the tablet 3 Press the spacer back into the wireless module slot 4 Replace the wireless compartment cover Align and slide into place 5 Store the wireless module in a safe place after removal WIRELESS RECEIVER STORAGE The Wacom wireless receiver is designed for portability Plug it into a USB port on your computer Then leave it there so the receiver will always be available for use with your tablet even when you are traveling or otherwise on the go with Intuos Pro The wireless receiver can also be stored within your Intuos Pro tablet To store the receiver in the tablet 1 Use your fingernail or other suitable non metallic tool to open the wireless receiver storage compartment 2 As you open the receiver storage door slide the wireless receiver spacer partially out of the tablet body 3 Insert the receiver into the spacer 4 Slide the spacer fully back into the tablet body and close the receiver storage door To remove the receiver from the tablet open the compartment Slide the spacer partially out of the tablet body Remove the receiver from the spacer Slide in the spacer and close the storage door Contents Index E le gt 63 QT LJ 0 cre Contents
65. espective control or in the Radial Menu as applicable You can create different keystroke functions for different applications See Application specific settings Deletes only the last entry in the P Define Keystroke Use your pointing device to click OK to accept or Cancel to exit Keys keystroke entry box Clears the keystroke entry box When defining keystrokes for the Touch Ring or mouse fingerwheel the dialog box provides two KEYS entry boxes Assign keystroke functions as Add Special X Name Cancel 7 Define Keystrokes Use your pointing device to move between the boxes and click OK to accept or Cancel to exit Keys described above for clockwise and counter clockwise movement on the ring or for front and back movement of the mouse fingerwheel Enter a Name for the defined Name Add Special x Cancel keystrokes pair and click OK To learn which keystroke shortcuts are supported by a particular application see the documentation that came with the application Contents Index taa yy LJ 0 ore Contents FUNCTION NAME DESCRIPTION MODIFIER Enables you to simulate modifier key s Such as SHIFT ALT or CTRL for Windows Or SHIFT OPTION COMMAND and CONTROL for Mac Many applications use modifier keys to constrain the size or placement of objects Choose one or more modifier key options Modifier Choose a CL
66. f the icon is not visible right click on the Taskbar select TOOLBARS and TABLET PC INPUT PANEL To disable the Input Panel 1 Open the Tablet PC Input Panel 2 Select TOOLS and OPTIONS 3 Choose the OPENING tab and uncheck the following boxes e FOR TABLET PEN INPUT SHOW THE ICON NEXT TO THE TEXT BOX e SHOW THE INPUT PANEL TAB 4 Click OK For details study the documentation that came with your system including the Windows training tools and Tablet PC tutorial To access the Tablet PC Pen Training from the START menu choose ALL PROGRAMS TABLET PC and TABLET PC PEN TRAINING Search the Windows help system for training tools if they are not available from the START menu See the Microsoft web site for enhanced information about digital inking in Windows You can also visit the Wacom web site at http wacom com and search digital inking in Windows Note The following workarounds in the Wacom software driver improve performance in Windows 7 and Vista e The Pen Flicks and press and hold to right click features are disabled in graphics applications using the Wintab API e There is no pressure sensitivity in Journal and other Ink features when both the Flicks and press and hold to right click features are disabled in the PEN AND TOUCH or PEN AND INPUT DEVICES control panel Contents Index a a 4 gt 90 QT LJ 0 ore Contents PRODUCT INFORMATION To learn more about Intuos Pro visit the Wacom web site for yo
67. formation document for Intuos located on the Intuos Pro installation CD The document includes safety precautions specifications and license agreement e The following information is not included with this product information about your specific computer hardware or operating system or information about your application software Your best source for this information is the set of manuals and discs that came with your hardware operating system or application e In addition to the built in inking support found within Microsoft Windows 8 Windows 7 and Vista many graphics applications also support pressure sensitivity and the pen eraser You can find a listing of applications that support these features on the Wacom web site see Product information Wacom s philosophy is to continually improve all of its products As a result engineering changes and improvements are made from time to time Therefore some changes modifications and improvements may not be covered in this manual Contents Index yy LJ 0 cre Contents ABOUT YOUR INTUOS PRO TABLET This section introduces you to Intuos Pro features and functionality There are three models of the Intuos Pro The model number is on the back of your tablet All models support pen and touch input Your Intuos can only be used with a compatible Wacom pen such as the pen that came with your product or a Wacom accessory tool specified for use with Intuos See Ordering parts and
68. ght mouse button click which displays a context menu e MIDDLE CLICK Simulates a middle mouse button click e DOUBLE CLICK Simulates a double click For easier double clicking use this function instead of tapping twice with the pen tip e CLICK LOCK Simulates holding down the primary mouse button Press the tool button once to initiate click lock Press the button again to release click lock Click lock is useful for dragging objects or selecting blocks of text e 4TH CLICK Simulates a 4th mouse button click e 5TH CLICK Simulates a 5th mouse button click Contents Index r 4 D 39 yy LJ 0 ore Contents FUNCTION NAME DESCRIPTION KEYSTROKE Enables you to simulate keystrokes Select this option to display the DEFINE KEYSTROKE dialog box Enter a keystroke or keystroke combination in the KEYS entry box Keystroke combinations can include letters numbers function keys Such as F3 and modifier keys such as SHIFT ALT or CTRL for Windows or SHIFT OPTION COMMAND and CONTROL for Mac You can also choose special keystrokes or keystroke combinations from the ADD SPECIAL drop down menu After defining a keystroke sequence click OK Important Because the ENTER Windows and RETURN Mac keys can be selected as a defined keystroke they cannot be used to select OK You must use your Intuos pro tool to click on the OK button Enter a name for the keystroke definition The name will be displayed with the r
69. h water Do not use any other substances liquids or solvents to clean the tablet or pen To clean the Intuos surface use an anti static cloth or a slightly damp cloth Apply light pressure and do not make the surface wet Do not use any type of detergent to clean the Intuos as it may damage the surface This damage is not covered by the warranty Contents Index E le gt 80 yy LJ 0 ore Contents APPENDIX This section contains tips on caring for Intuos Pro instructions on how to uninstall the tablet software information about digital inking and more Replacing the pen nib Uninstalling Intuos Pro Installing multiple tablets Using integrated applications Importing expert settings Using the optional Airbrush and Art Pen Using the optional mouse Product information Ordering parts and accessories Warranty Service REPLACING THE PEN NIB To protect your tablet from scratching and for best performance periodically replace your pen nibs Important Replace the pen nib before or when it looks like this Q Q The pen nib tip will wear with normal use Excessive pressure will cause it to wear sooner Do Do Replace the nib when it gets too short or b D develops a flat point 1 Unscrew the pen stand base to access the nib removal tool and replacement nibs Nib removal tool Replacement nibs e 5 standard nibs black e 1 flex nib white and black e 1 stroke nib white e 3
70. hard felt nibs gray 2 Clasp the old nib and pull it straight out of the pen Use the nib removal tool pair of tweezers needle nosed pliers or similar instrument Contents Index E le D 81 yy LJ C ore Contents 3 Slide the end of the new nib straight into the barrel of the pen Firmly push the nib until it stops Replace nib at 1 mm 1 25 inch or less Note Stroke nibs are spring loaded providing additional tactile feedback when you are working with the Intuos Pro Pen or optional Airbrush They are installed in the same manner as a standard pen nib A Warning Choking hazard Prevent children from swallowing the pen nib or side switch The pen nib or side switch may accidentally be pulled out if children are biting on them Important When not in use place pens in the pen stand or lay them flat on your desk To maintain the sensitivity of your Intuos Pro tools do not store them where they will rest on the tip or eraser UNINSTALLING INTUOS PRO If you uninstall the driver your tablet will lose all functionality Reinstall the driver to restore tablet functionality with default settings Windows 8 1 From the Windows 8 Start screen right click in the screen s bottom left corner and chose CONTROL PANEL from the pop up menu If you are using Windows 8 Classic Desktop press the Windows key on your keyboard or select the Windows icon in the Charms bar to access the Start screen 2 Choose UNINSTALL A PROGRA
71. has two customizable functions that can be selected by rocking the switch in either direction You can use the switch whenever the pen tip is within 10 mm 0 4 inch of the tablet active area You do not have to touch the pen tip to the tablet in order to use the switch The default switch positions are e Upper switch double click This is easier than tapping twice with the pen tip e Lower switch right click This brings up application specific or icon specific menus Tip To position a document or image in any direction within the d active window set a switch function to PAN SCROLL Then press the pen button and move the pen tip across the tablet to reposition the image Release the pen button or lift the pen tip from the tablet surface when done In some application windows the document will precisely follow the screen cursor as you move the pen tip In others it will simply move in the same general direction as the screen cursor To assign new switch functions see Customizing tool buttons TABLET CONTROLS To improve your workflow Intuos pro features ExpressKeys and a Touch Ring Press individual keys to perform frequently used functions or keystrokes The tablet controls can also be used to modify touch pen or other tool properties as you work Active area The section of your tablet that senses touch or pen input ExpressKeys Press the customizable ExpressKeys to perform frequently used functi
72. he TOOL list Then select an appropriate tab to customize and change settings using the available options See also Navigating with touch Choosing custom touch functions Choosing custom touch functions Navigating with touch Contents Index E le D 25 QT LJ C Cree Contents SETTING THE TOUCH OPTIONS Select the TOUCH OPTIONS tab The touch options determine how fast you must move or tap your fingers in order for an action or gesture to be recognized Adjusts the screen pointer for speed of Check the box to DOUBLE TAP TIME adjusts how fast you must tap tracking and navigating Choose a SLOW enable touch input tO register a double click To test your setting speed to move the screen cursor at a position the screen cursor over the TEST area and slower rate with more finger motion tap twice Choose a FAST speed to move the screen cursor quickly with less motion Touch Options v Enable touch input Pointer Speed Double Tap Time Slow Fast Longer System Sets the scrolling speed of the SCROLL touch gesture Scrolling Speed Test Slow Fast Sets the acceleration level of the screen pointer Choose a Low Pointer Acceleration setting for a slower response to your finger motion on the tablet Choose a HIGH setting for a quicker Low High response 3 Default Note Touch speed and acceleration settings are independent of system settings Changes you make to these settings in the Wacom Tablet control pa
73. he primary button used to CLICK Front and rear buttons and select These are set for FORWARD and Back functionality within your The mouse buttons can be customized Internet browser Default settings Left CLICK Right RIGHT CLICK Middle MIDDLE CLICK Front FORWARD Rear BACK Important When the optional mouse is not in use place it on your desk Leaving a tool on the tablet may interfere with screen cursor positioning when using other pointing devices or may prevent your computer from going to sleep See also Customizing the mouse Contents Index E le gt 86 QT LJ C ore Contents CUSTOMIZING THE MOUSE Use the optional Mouse to open the Wacom Tablet control panel The MOUSE tool will be selected in the TOOL list If the mouse is not automatically selected choose it from TOOL list Select the MOUSE tab Mouse Select the functions to perform when pressing a button Click 4 Right Click X Forward z A ed Back X ON Middle Click X Wheel Function Scroll X Scrolling Speed Medium z Combine With __ Ctrl Alt Shift Default WHEEL options control the fingerwheel function SCROLL Default setting When selecting SCROLL the tab displays custom scroll options Choose a SCROLLING SPEED to use for each notch of wheel movement When you select one or more COMBINE WITH modifier key options the selected option s will be sent to the application along with each scroll action
74. ich keystroke shortcuts are supported by a particular application see the documentation that came with the application e Choose SKIP to set the Touch Ring toggle button to skip a function mode in the toggle sequence e To zoom images at the current position of the screen cursor in Adobe Photoshop CS3 or later open the Adobe Photoshop general preferences pane Check the ZOOM WITH SCROLL WHEEL option and click OK e To set the brightness of the Touch Ring status LEDs and active area markers click the OPTIONS button at the bottom of the Wacom Tablet control panel In the OPTIONS dialog box change the BRIGHTNESS ADJUSTMENT setting as needed Important Some applications can override and control the Touch Ring functions For details see Using integrated applications Customizing the ExpressKeys Customizing the Touch Ring Working with Display Toggle Application specific settings Contents Index E le D 34 yy LJ 0 ore Contents TABLET TO SCREEN MAPPING Select the MAPPING tab to define the relationship between tool movement on the tablet surface and cursor movement on the monitor screen By default the entire active area of the tablet maps to the entire monitor If more than one monitor is in use the tablet will map to all monitors See Working with multiple monitors Pen Eraser Mapping v Use Windows Ink Orientation ExpressKeys Left Mode Pen Mouse Screen Area Portion
75. ing with touch Touch the tablet with two fingers spaced closely together Then while still touching the tablet surface move your fingers apart ExpressKeys The customizable control keys located on your Intuos Pro tablet See using the ExpressKeys ExpressKeys Left A tablet setting where the Touch Ring and ExpressKeys are oriented to the left of the tablet ExpressKeys Right A tablet setting where the Touch Ring and ExpressKeys are oriented to the right of the tablet Fingerwheel The control wheel on the optional Intuos Pro Airbrush Contents Index E le D 93 yy LJ C ore Contents Journal A Microsoft Windows application that electronically simulates a physical journal pad but with the advantages of digital note taking For example you can create quick sketches and jot handwritten notes that can be converted to text and sent on to colleagues for digital mark up Journal includes a variety of pen marker and highlighter tools plus an eraser that is easily activated by the eraser end of your Wacom pen Additionally your handwritten content is searchable within Journal LED Light Emitting Diode Used as tablet indicator light s Mapping The relationship between the tool position on your Intuos Pro tablet and the cursor position on the monitor screen Modifier Modifier keys include SHIFT ALT and CTRL for Windows or SHIFT CONTROL COMMAND and OPTION for Mac You can customize your Intuos Pro tool butt
76. ings Move the pressure controls to change the sensitivity curve e CLICK THRESHOLD determines the amount of force required to register pressure or generate a pen click e Use the SENSITIVITY control to change the slope of the pressure response curve e MAX PRESSURE determines how hard you Click Threshold must press the pen tip to reach maximum B Sensitivity pressure Y Max Pressure Pen Feel Details Using your pen tip or Interactive Premure Profile eraser make several g strokes within the box to test the results of your changes A curve that increases quickly makes the pen feel more sensitive Important In the PEN and ERASER tabs these settings are adjusted simultaneously with the TIP FEEL or ERASER FEEL slider which override the advanced pressure settings Contents Index E le D 31 QT LJ C S Contents CUSTOMIZING TOOL BUTTONS Select the PEN tab to change the functions assigned to the side switches and tip of your pen Select the function to perform when Pen pressing the upper or lower side switch Tip Feel Aik Semy The selected function occurs when you bring the pen tip within 10 mm 0 4 nen eas z High inch of the tablet surface without touching the tablet and then press the Customize upper or lower side switch Current Pressure m Tip To make double clicking easier Davible Che X set the side switch to DOUBLE Click Full CLICK
77. ip Lift the pen tip and place it in a different location The screen cursor should again jump to the new position 7 Check the Notes linked to the driver download page for updated information Review the Important Product Information document located on the Installation CD for cautions and warnings If you have trouble installing the driver see Troubleshooting Doas Notes User specific preferences are supported After logging on each user can customize their personal settings in the Wacom Tablet control panel Switching to another user either by logging on or user switching methods will load the settings for that user If you lose cursor control the preferences may be corrupted See Managing preferences to delete the current preference settings and return the Intuos pro to its factory default condition Driver installation automatically activates the pen input functions available in Microsoft Windows 8 and Windows 7 except for Windows 7 Starter and Home Basic See Pen and digital ink capabilities in Windows To download a new software driver when available from the Internet see To uninstall the software driver see Uninstalling Intuos Pro Contents Index yy LJ 0 ore Contents CONFIGURING THE TABLET ORIENTATION When you first installed Intuos pro you were prompted to choose a default tablet orientation The orientation you chose was used to determine the tablet default settings However you
78. ividual application to the list and then customize your tool settings for that application e When no application specific settings are in use and a tool is selected from the TooL list the APPLICATION list displays the ALL icon which contains tool settings that apply to all of your applications In the example below no application specific settings have been added for the GRIP PEN The ALL icon is displayed and the GRIP PEN will have the same settings in all applications Tool lt F d WA Functions Touch Grip Pen Application A All e When application specific settings are added or when automatic default setting from the driver are in effect the ALL icon changes to ALL OTHER and an application icon is displayed for the newly added application s Tool lt lal 4 Pen Application FES A a a 12 x64 In the above example application specific settings have been added for the GRIP PEN If you select the ALL OTHER icon and make changes to the GRIP PEN settings your changes will apply to the GRIP PEN in all applications except those which you have added to the APPLICATION list If you select an application icon and make changes to the GRIP PEN settings your changes will apply to the GRIP PEN while you are using that application only When you create application specific settings you are creating a separate group of settings for the selected tool and application Tip To review the ExpressKey Touch Ring or pen set
79. l along the tablet surface The X and Y DATA values should change to reflect the tool position Test your pen switches A tablet status LED should brighten each time you click with the tool tip press the side switch or press the tool eraser to the tablet e Click on the tablet surface with the tool tip The SWITCHES state and PRESSURE value should change PRESSURE should change from approximately 0 with no pressure applied to approximately 100 when full pressure is applied e Next press the side switch without pressing the tip to the tablet The SWITCHES state should change For the Intuos Pro Pen do this for both positions of the side switch Pen Tip 1 SWITCHES states Side switch lower position 2 Side switch upper position 3 Eraser 1 Airbrush Tip 1 SWITCHES states Side switch 2 Eraser 1 e Press the eraser to the tablet The SWITCHES state and PRESSURE value should change PRESSURE should change from approximately 0 with no pressure applied to approximately 100 when full pressure is applied e For the optional Airbrush move the fingerwheel forward The WHEEL value should decrease to a value of approximately 0 when the fingerwheel is all the way forward Move the fingerwheel backward The WHEEL value should increase to approximately 1000 when the fingerwheel is all the way back Test tilt for the x axis by moving the pen from a vertical position toward the right the X TILT value should change from approxim
80. l touching the tablet surface move or pinch your fingers together Pixel The smallest unit of measure on your monitor screen Pressure sensitive A quality of the Wacom pen tip and eraser that senses the amount of pressure being applied This is used to create natural looking pen brush and eraser strokes in applications that are pressure sensitive Pressure sensitive application Any application that supports pressure sensitive input Proximity The height above the tablet active area where pen detection occurs See also Using the side switch Radial Menu A hierarchical menu in radial format Each level of the menu consists of eight menu slices which may contain various features and options to choose from You can customize the buttons of your pen or tablet to display this menu Rotate A motion used when Navigating with touch Touch the tablet with two fingers spaced slightly apart and move rotate them in a circular fashion or move them in opposing directions Alternatively hold one finger stationary and track your other finger around the stationary finger Screen cursor The pointer on the display screen Screen cursors come in different shapes Such as an I beam arrow or box depending on which application you are running Contents Index E le D 94 yy LJ C ore Contents Swipe A motion used when Navigating with touch Touch the tablet surface with three four or five fingers and move them i
81. ld battery Install new battery Be sure to first lift battery Carefully install the battery at the angle edge before sliding battery shown to prevent damaging the battery out of the compartment contacts Important When replacing the battery be careful not to drop it on hard surfaces The battery can be damaged internally when dropped and should be replaced even if there is no obvious damage This will help prevent any future damage that could occur to the tablet if the battery has been dropped is installed in the tablet and then later develops a short or leak while in the tablet A Warning See the Important Product Information guide for battery safety precautions Many communities offer voluntary or mandatory recycling programs for batteries Properly recycle the old battery by following all applicable laws and in accordance with the safety precautions for Lithium lon batteries as described in the Important Product Information guide Keep batteries out of the reach of children Promptly recycle old batteries Contents Index E le D 62 yy LJ C ore Contents WIRELESS MODULE REMOVAL To remove the wireless module 1 Turn the tablet over Remove the wireless compartment cover Medium and large sized tablets are equipped with two covers one for the Wacom wireless module and one for the rechargeable battery Small sized tablets come with a single cover Slide cover away from tablet body to remove 2 Use your thumbnail or oth
82. le v Ctrl For multiple displays Modifier v Alt Enables or disables the Express View display Pan Scroll When enabled you can rest your finger on an ExpressKey to show the ExpressKey settings ae _ See Using the Expresskey display ee Default Tab shown for right handed use Important Some applications can override and control the ExpressKey functions For details see Using integrated applications Contents Index _ le D 33 QT LJ C ore Contents CUSTOMIZING THE TOUCH RING To customize the Touch Ring select the TOUCH RING tab Touch Ring functions can be modified to perform various zooming scrolling or custom keystroke actions Touch Ring Choose a function to perform when using the Touch Ring The ring can be toggled between four customizable modes Adjust speed to control the rate at which et Par zooming and scrolling occurs or the speed at which keystroke events are sent to an Cycle Layers application Touch Ring functions can be defined for use with specific applications See using the Touch Ring for more Kecipkes z information g Auto Scroll Zoom z Keystroke v Rotate bd R TA E TA p F 99 p Brush Size The checkbox enables or disables display 7 Show touch ring setting Default of the Touch Ring settings diagram Tips e To customize the ring for other actions select the KEYSTROKE option and define a custom keystroke function To learn wh
83. less mode Connect the USB cable between Intuos Pro and a primary USB port located directly on your computer or to a powered USB hub e The battery charges whenever the cable is connected and the battery is not fully charged e For everyday use charge your battery in approximately 4 hours To fully charge an empty battery it takes approximately 6 hours Actual charge time depends upon battery level and tablet use while charging e USB connection deactivates wireless mode Important e When charging the battery always connect the USB cable directly to your computer or to a powered USB hub A non powered hub may not provide enough current to charge the battery which may affect overall tablet operation e When your tablet is not connected to your computer via USB cable you can charge the battery using a standard wall adapter with 5V output voltage Quick charging will not work during this process For more information check the product information on the Wacom web site for your region A Warning See the Important Product Information guide for safety precautions Tips e When charging be sure that both the battery and the Wacom wireless module are installed in the tablet e To check the battery charge status open the Wacom Tablet control panel click FUNCTIONS and select the WIRELESS tab See Battery and wireless connection status e Make the most of your wireless time See Power saving features and Battery life inform
84. lication its icon appears in the APPLICATION list whenever the respective tool is selected in the TOOL list Select the application and then customize the control panel tab settings for your tool and selected application Once you have created application specific settings applications that have not been customized in this manner will use the tool settings for ALL OTHER REMOVING APPLICATION SPECIFIC SETTINGS To remove an application specific setting 1 Inthe TOOL list select the tool from which you want to remove the application specific setting 2 Inthe APPLICATION list select the application you want to remove from the list 3 Click on the APPLICATION list button In the dialog box that appears click DELETE to confirm your selection The selected application is removed from the list along with any custom tool settings Tip To quickly remove all application specific settings from a single tool remove it from the Toot list Then place the tool back on the tablet The tool will be added back to the Tool list using the default settings This method cannot be used to remove custom FUNCTIONS settings Contents Index E le D 50 yy LJ C ore Contents WORKING WITH MULTIPLE TOOLS The Wacom Tablet control panel is designed to help you customize and keep track of the settings for your tablet and Intuos pro tools The tool you use to open the control panel is automatically selected and the appropriate tabs for that tool ar
85. lications and scroll in other applications Some applications may interpret zooming as scrolling or may completely ignore zooming Likewise scrolling may be interpreted as zooming or ignored completely Setting 2 CYCLE LAYERS Enables you to cycle up or down through a stack of layers when working in Adobe Photoshop Move your finger clockwise along the ring to cycle up through layers Setting 3 BRUSH SIZE Sets the ring to increase or decrease the brush size of your drawing tool when working in Adobe Photoshop Setting 4 CANVAS ROTATION Enables you to rotate or flip an entire image when working in Adobe Photoshop CS4 or later See customizing the Touch Ring to modify how the Touch Ring works Tap upper or lower portion of ring for incremental changes Press the Center Button to toggle between four customizable modes As you toggle between settings a corresponding status LED illuminates Any disabled settings are skipped in the toggle sequence A diagram of the current Touch Ring settings appears briefly on your display screen as you press the toggle Important Some applications can override and control the Touch Ring functions For details see Using integrated applications Use the Wacom Tablet control panel to customize the Touch Ring options Control panel overview Customizing the Touch Ring Contents Index E le D 21 yy LJ 0 ore Conten
86. may have created for it A removed tool can be added back to the TOOL list by placing it back onto the tablet CHANGING THE TABLET MODE Intuos pro is configured for optimum performance in most applications However some handwriting recognition software requires a higher data rate than is typically needed for most applications This higher data rate can slow computer performance in some circumstances If your recognition software does not work well you can change the tablet mode from standard to recognition mode Within the control panel TABLET list double click on the tablet icon The TABLET MODE settings apply to all tools and applications If desired enter a new name for the tablet icon fTabiet E Name Intuos pro M STANDARD MODE is recommended for graphics applications Choose RECOGNITION MODE for the maximum data rate Required by some handwriting recognition software Tablet Mode Standard Mode Contents Index yy LJ C ore Contents ADVANCED OPTIONS Click on the Wacom Tablet control panel OPTIONS button to access the advanced OPTIONS dialog box C Note These settings apply to all tablets mice pens and applications You can change the SIDE SWITCH MoDnE to best fit the way you like to use the pen when making right clicks or other click Side Switch Mode functions Hover Click Hold the pen tip close to the tablet and press the side switch to do a Select E P
87. mmediately To wake from sleep mode first press the Toggle Button or the power button on the wireless module Depending on your tablet model touch the tablet surface with your finger or the pen Then move your finger or pen along the tablet to fully activate Intuos Pro Important Conserve battery power by turning off the wireless module when you are not using the tablet Push the power button on the wireless module to turn it off Otherwise the tablet battery may need charging before you can again use the tablet wirelessly See Battery life information Contents Index _ le gt 60 QT LJ 0 ore Contents BATTERY LIFE INFORMATION When using your Intuos Pro wirelessly the battery life will vary depending upon usage and your tablet model For example you can expect a full day of working charge when using small and medium sized tablet models If you have a large Intuos Pro tablet model expect a half day of battery charge due to its large size Wacom recommends purchasing an extra battery See Ordering parts and accessories e All batteries age over time and gradually lose their ability to hold a charge The typical life span of a Li lon battery is two to three years whether it is used or not The life and performance of a Li lon battery is not improved by cycling discharging and recharging e Always charge the battery whenever the low battery warning appears on your display screen See also Power saving features
88. n the same direction Tablet PC Input Panel TIP The Microsoft Windows Tablet PC Input Panel enables you to use your Wacom pen to create handwritten notes or work with an on screen keyboard The Input Panel dynamically converts your handwriting to text Information you create can then be inserted into other documents spreadsheets or illustrations Tap A motion used when Navigating with touch Touch and lift a single finger or multiple fingers depending on the gesture from the tablet Tilt sensitive A quality of the pen tip and eraser that senses the amount of tilt between the tool and tablet This is used to create natural looking pen brush and eraser strokes in applications that are tilt sensitive Touch A method of interacting with a computer using only your fingers on the Intuos Pro tablet May also be referred to as touch input Touch Ring The customizable control ring located on your Intuos Pro tablet See using the Touch Ring Touch sensor The navigation area of your Intuos Pro tablet where touch is detected The touch sensor resides within the active area and does not accept pen input Track A motion used when Navigating with touch Touch and move a single finger across the tablet surface USB Universal Serial Bus A hardware interface standard for connecting computer peripheral devices USB ports support hot plugging which allows you to disconnect a USB device without turning off your computer Wint
89. nel do not affect similar system settings However changes made to similar system settings may affect your Intuos Pro tablet settings Contents Index _ le D 26 yy LJ C Cree Contents CHOOSING CUSTOM TOUCH FUNCTIONS To create custom touch gestures select the My GESTURES tab Touch gestures are available when My Gestures selected and are modified based on your selection from the drop down menus Position the screen cursor over a touch Enable touch input option to see a static image of that Three Fingers function v Tap and hold If you do not choose a specific option to Ty ae m view then the control panel will display each option sequentially from top to bottom Four Fingers Five Fingers See also Navigating with touch and J Swipe up Y Tap and hold Choosing custom touch functions Show Desktop Z Keystroke xj Speichern V Swipe down v Swipe down Flip 3D 7 Show Settings Default Windows screen capture shown Available options may vary depending on your operating system and version Contents Index a E D 27 yy LJ 0 ore Contents CUSTOMIZING INTUOS PRO Use the Wacom Tablet control panel to customize Intuos pro for the way you like to work Advanced users can learn how to further optimize Intuos pro by creating Application specific settings Control panel overview Customizing the pen Setting the touch options Tablet to screen mapping Button functions Working with Display
90. ness Depending on the brush shape characteristics you have selected in your application you can simulate calligraphy pens broad felt tip markers and any other non circular brushes or tools Replaceable nib Important When not in use set the Airbrush or Art Pen flat on your desk To maintain the sensitivity of your tool do not store it in a container where it will rest on its tip or eraser Leaving an Intuos Pro tool on the tablet may interfere with screen cursor positioning when using other pointing devices See Product information to learn more about which applications currently support the Airbrush fingerwheel or Art Pen rotation See Ordering parts and accessories for information on where to purchase an Intuos Pro Airbrush or Art Pen Contents Index E le gt 85 yy LJ C ore Contents USING THE OPTIONAL MOUSE The optional Mouse is cordless battery free and works on the Intuos Pro tablet Fingerwheel Can be rolled or pressed for an additional button function e Roll the fingerwheel to scroll in most windows and applications Move the wheel forward to scroll up and back to scroll down e Press down on the wheel to perform a MIDDLE CLICK For Microsoft Office applications that support a wheel mouse press the CTRL key and move the fingerwheel to zoom in and out F Right button Displays a context menu when pressed Left button This is t
91. o which the function has been assigned Normal mapping returns when you release the button When using a tool in mouse mode screen cursor movement is adjusted to act as if acceleration were off and speed set to slow DISPLAY TOGGLE For multiple monitor systems Enables you to toggle the current tablet mapping and screen cursor between different displays when you press an ExpressKey that has been assigned this function See working with Display Toggle MODE TOGGLE Toggles between pen mode and mouse mode When first setting a tool button to MODE TOGGLE the MOUSE MODE dialog box is displayed where you can adjust the mouse acceleration and speed Sets the screen cursor tracking speed when in mouse mode P Mouse Mode Sets the screen cursor acceleration I ii Mouse Speed when in mouse mode of High T Fast Note You can only set one Mouse Speed and one Mouse Acceleration for each device Mouse mode settings can be accessed from a number of different locations within the control panel However only one MOUSE ACCELERATION and SPEED setting can be made for each tool and application that you are customizing The mouse mode settings are independent of system settings Changes you make to these settings in the Wacom Tablet control panel do not affect similar system settings However changes made to similar system settings may affect your Intuos pro tablet settings Contents Index E le
92. og back in When the tablet driver loads it will create new preferences files with the factory defaults You can quickly restore tablet preferences that have been backed up for the CURRENT USER or ALL USERS by clicking RESTORE within the utility Note Do not manually remove the WACOM TABLET PREFPANE file from the main LIBRARY PREFERENCE PANES folder This file is only to be removed when uninstalling the Wacom software driver and then only when using the Wacom Tablet Utility Ink does not work correctly There may be a problem with the Ink preferences Remove the with Intuos Pro damaged preference files as follows They will be re created when you enable handwriting recognition 1 Open SYSTEM PREFERENCES choose SHOW ALL and select INK Then turn off handwriting recognition 2 From the Go menu choose your HOME Open the LIBRARY and PREFERENCES folders Remove the following preferences e COM APPLE INK FRAMEWORK PLIST e COM APPLE INK INKPAD PLIST e COM APPLE INK INKPAD SKETCH 3 Go back to SYSTEM PREFERENCES and INK and then enable handwriting recognition 4 Test the Ink function using your Wacom tablet and pen If this procedure does not resolve your problem with Ink contact Apple Support for further assistance Wacom is not the software manufacturer for Ink and we are limited in our abilities to support a third party software application Contents Index yy LJ 0 ore Contents TECHNICAL SUPPORT OPTIONS
93. ol buttons Contents Index _ le D 36 QT LJ 0 ore Contents PORTION OF SCREEN AREA To define which portion of the display screen your tablet will map to in the MAPPING tab choose a SCREEN AREA option FULL Maps the entire monitor s area This is the default setting See also Working with multiple monitors MONITOR Maps the entire area of a single monitor that you choose If more than one monitor is connected to your system an option will be available for each detected monitor In the dialog box that appears choose a method for defining a portion of the PORTION display e Drag corners of the foreground r Portion of Screen Choose one of the following three ways to define Portion of Screen 1 Drag Handles Position Rectangle For Screen graphic to select the screen area e Select the CLICK TO DEFINE SCREEN AREA button and move the screen cursor to select the screen area Be sure to follow any MESSAGE 2 Select Area with Screen Cursor prompts e Enter coordinate values Click to Define Screen Area After defining a portion of the screen you may need to use a different input device to access other portions of the screen area Contents Index 3 Enter Coordinates in Pixels Top 0 Bottom 1199 Left 0 Right 1919 Message Cancel OK QT LJ 0 ore Contents PORTION OF TABLET AREA To define the tablet area that will be mapped to the sc
94. ols When you open the control panel an icon for the Intuos Pro Pen or other tool is displayed in the TooL list A TOUCH icon and applicable tabs are displayed Tool Tips are available for most control panel items Position the screen cursor over an item and let it rest there The appropriate Tool Tip will pop up in a few moments Your keyboard tab and arrow keys can also be used to navigate the control panel See Control panel Contents Index yy LJ 0 ore Contents USING INTUOS PRO This section describes the functionality of the Intuos pro See also The Intuos pro multi touch experience Important Use only a compatible Wacom pen such as the pen that shipped with your product or a Wacom accessory tool specified for use with Intuos pro Other pens may not function properly SETTING UP YOUR WORK AREA To minimize fatigue comfortably organize your work area Position your tablet pen and keyboard for easy access without unnecessary reaching Adjust your monitor so you can view it comfortably with minimum eyestrain and placed approximately an arm s length in front of you For best results position the tablet so the screen cursor follows the same direction as your hand movements on the tablet Use a gentle grip when working with the Intuos Pro Pen or other tools If you are using the tablet primarily as a creative tool consider placing the tablet below the keyboard and centered underneath your monitor Using
95. om Note This procedure does not affect the default orientation At the system log on and user switching screens the tablet uses the default orientation you chose during the install process To change the default orientation you must re install the tablet driver Contents Index yy LJ C ore Contents THE TABLET ACTIVE AREA Depending on your tablet model Intuos pro can accept pen input or both pen and touch input The tablet active area is the area of your Intuos pro tablet that senses pen input or touch Touch is ignored whenever the pen tip or eraser is within the tablet proximity range Lift the pen and your hand away from the tablet active area to enable touch Wherever you place the pen on the tablet the screen pointer will jump to the corresponding point on the screen The screen pointer indicates pen position and follows the movement of the pen across the tablet surface Note The active area is a mapped representation of your computer screen s By default it uses the entire screen or all screens if you have multiple displays You can customize the mapping relationship for pen input by setting the Tablet to screen mapping Learn about the touch experience with Intuos pro Also see the Wacom Gesture Guide for Windows and Mac at www wacom com en support manuals w N Q tel ES ES ey G paso O oowoo Contents Index yy LJ C ore Contents
96. on APPLICATION DEFINED Reports only the button number to the application This is for applications such as CAD programs that have built in tablet support This function may also be used by some highly integrated applications for direct control of the tablet ExpressKeys and Touch Ring SKIP Sets the Toggle Button to skip a function mode that has been assigned this option in the toggle sequence DEFAULT Returns a button to its default setting Contents Index r 4 45 QT LJ C ore Contents USING AND CUSTOMIZING THE RADIAL MENU The Radial Menu is a pop up menu that provides quick access to editing navigation media control functions and more Set a tool button or ExpressKey to the RADIAL MENU function Press the button to display the Radial Menu centered at the screen cursor position You can also use the appropriate touch gesture to open the Radial Menu The hierarchical Radial Menu appears in circular format Each level of the menu consists of eight control slices which may contain various features and options to choose from Click to select an option Some selections may display a submenu for additional options The menu closes after you make a selection To close without making a selection click on the X located at the center of the Radial Menu or on a control slice that has no function assigned to it You can also again press the button used to display the menu To make a selection without
97. ons or keystrokes or to simulate button clicks or modifier keys Note Representation is Medium table with eight ExpressKeys Small tablets are equipped with six ExpressKeys Touch Ring Slide your finger around the ring to zoom scroll or perform other custom actions Press the Center Button to toggle between four customizable modes When you first begin working with your Intuos pro the ExpressKeys are set to tablet default functions as shown below See also customizing the ExpressKeys and customizing the Touch Ring Contents Index E le D 18 yy LJ 0 ore Contents Pen amp touch default settings TOUCH ON OFF SETTINGS CL C PRECISION MODE CL DISPLAY TOGGLE SHIFT modifier key CTRL CMD modifier key ALT OPT modifier key PAN SCROLL Notes On small tablets the ExpressKey default settings from top to bottom are TOUCH ON OFF SETTINGS SHIFT and CTRL CMD ALT OPT and PAN SCROLL The ExpressKeys can be operated in combination with one another For example customize one key for the CTRL function and another for ALT When you press both keys at the same time a CTRL ALT function is initiated APPLICATION SPECIFIC EXPRESSKEY DEFAULTS If you are working with a commonly used application such as Photoshop Illustrator or Corel Painter the Intuos driver will sense the application and automatically set the ExpressKeys to commonly used function
98. ons or ExpressKeys to simulate a modifier key Mouse acceleration A setting that allows you to adjust the screen cursor acceleration when using mouse mode Mouse mode A method for positioning the screen cursor When you place an Intuos Pro tool on the tablet you can move the screen cursor with a pick up and slide motion similar to using a traditional mouse This is known as relative positioning and is the default setting for the optional Mouse See also pen mode Mouse speed A setting that allows you to adjust the speed at which your screen cursor moves when using mouse mode Nib The replaceable pen tip Pairing A method of creating a virtual cable link between two devices Pan A motion used when Navigating with touch Touch the tablet surface with your fingers and move them in the same direction Pen input A method of controlling a computer using the pen tool on your Intuos Pro tablet Pen mode A pen input method of positioning the screen cursor Wherever you place your pen tool on the tablet the screen cursor will jump to the corresponding point on the screen This is Known as absolute positioning and is the default setting for Intuos Pro Pen tools Pen mode allows you to quickly position the screen cursor without having to first find it and then move it across the desktop See also mouse mode Pinch A motion used when Navigating with touch Touch the tablet with two fingers spaced slightly apart Then while stil
99. or your region e In Australia Singapore Taiwan and Korea please visit http BuyWacom com au BuyWacom com sg BuyWacom com tw and BuyWacom co kr respectively e In other countries please contact your local dealer or distributor Some parts and accessories may not be available in all regions Contents Index a a 4 D 91 QT LJ 0 ore Contents WARRANTY SERVICE The full product warranty and licensing agreement is provided in the Important Product Information document included on your product CD WARRANTY SERVICE IN THE U S AND CANADA To obtain Warranty service within the U S or Canada contact Wacom Support Center Phone 1 360 896 9833 Email Inquiry form http wacom us en contact support WARRANTY SERVICE OUTSIDE OF THE U S AND CANADA For products purchased or used outside the United States and Canada the warranty period may be determined by regional requirements The warranty period for your pen display is described on the Support page of the Wacom web site for your region or contact Wacom Support Wacom Technical Support in Asia Pacific except Japan and China Detailed Asia Pacific Limited Warranty policy and product registration may be found online at http wacom asia To obtain technical support or Warranty service within Southeast Asia Oceania and Taiwan please contact Wacom Customer Support Service for your region Phone numbers can be found at http wacom asia customer care
100. ormation for touch sensitive tablets D Driver Info Pointing Device Info Version 6 3 6 1 Proximity Tablet Info Tablet Intuos pro M Model PTH 651 Version 0 13 Left Buttons All Switches Open 1 Left Touch 0 Pressure 0 OEM Code 0 Battery Status Battery is charged Wireless Mode Off Wireless ID WL 9D40BD Touch Info Version 0 13 Status 0 e f more than one tablet is connected to your system in the TABLET INFO column select the unit for which you are testing e Use the information shown in the DIAGNOSTICS dialog box when testing your tablet and tools Note If a tool button is set to RADIAL MENU or OPEN RUN that function will occur when the button is pressed In this case you may want to change the button function before testing Testing the ExpressKeys Testing the Touch Ring Testing a pen Contents Index E le D 68 yy LJ C ore Contents TESTING THE EXPRESSKEYS 1 With the DIAGNOSTICS dialog box open observe the TABLET INFO column as you test each ExpressKey Be sure to select the tablet unit you are testing from the TABLET INFO column 2 Test the keys by pressing them one at a time Each time you press a key its number is shown next to the LEFT BUTTONS category 3 When you are done click the CLOSE button to exit the dialog box TESTING THE TOUCH RING 1 With the DIAGNOSTICS dialog box open observe the TABLET INFO column as you test the Touch Ring Be
101. ortable Position for drawing and navigating Position for erasing Place the pen stand within easy reach of your tablet The stand allows for vertical or horizontal placement of the pen Important e When not in use place the pen in the pen stand or lay it flat on your desk To maintain the sensitivity of your pen do not store the pen in a container where it will rest on its tip or eraser e Leaving an Intuos Pro Pen on the tablet may interfere with screen cursor positioning when using other pointing devices or may prevent your computer from going to sleep Contents Index QT LJ 0 ore Contents POSITIONING To position the screen cursor move the pen slightly above the active area without touching the screen surface Press the pen tip on the screen to make a selection CLICKING Tap the screen once with the pen tip or touch it to the screen with enough pressure to register a click To double click press the upper side switch when set to DOUBLE CLICk or quickly tap the screen twice in the same place with the pen tip ERASING In supported applications the pen eraser works like the eraser on a pencil Visit the Wacom website to learn about applications that support the eraser See Product information If the eraser is not supported in an application you can still use it for positioning drawing or annotation DRAGGING Select an object then slide the pen tip across the screen to move the object WORK
102. p Language file e Some software developers may create custom settings files which are specifically designed to provide optimum performance when using your Wacom product with their applications e Visit the Wacom web site for your region to choose from a variety of custom settings files that may be available for your product e Each XML file may include customized settings for one or more applications These settings may apply to the ExpressKeys Touch Ring Radial Menu or pen button and eraser functions To import expert settings 1 Choose an XML file with settings for use with a particular application Double click on your file selection 2 Carefully read and follow the instructions in the confirmation dialog e The utility will import settings for one or more applications Any previous settings for those applications may be overridden e You are encouraged to back up any existing control panel settings before importing the expert settings e You can cancel or continue to import the settings 3 When you choose to import settings only the settings specified in the XML file will be imported Any corresponding settings will be overridden with the new values All other existing settings will remain unchanged After the import process is completed you will have an opportunity to view the new settings within the Wacom Tablet control panel Contents Index 4 D 84 yy LJ C ore Contents USING THE OPTIONAL AIRBRUS
103. r wireless operation see Battery and wireless connection status Intuos Pro medium sized tablet shown Customizable ExpressKeys Small Intuos Pro tablets model PTH 451 Active area markers are used to have six ExpressKeys identify the active area for pen input The ExpressKeys also provide automatic lor P ps your Intuos settings for a number of popular applications Pro Pen and the touch experience i j with Intuos Pro See Using the Expresskey display Active area To set the brightness level of the active area markers and status LEDs see Advanced options Contents Index yy LJ 0 ore Contents Wacom wireless module slot Storage compartment for Wacom wireless receiver See going wireless with Intuos Pro Wireless compartment See Wireless setup Battery compartment Small sized tablets are equipped with a single cover used to access the Wacom wireless module and rechargeable battery Security lock slot for pen tether or security cable USB port USB cable Disconnect the USB cable when storing Intuos Pro Do not wrap the cable around the tablet See The tablet active area Contents Index yy LJ C Cree Contents INTUOS PRO PEN All Intuos Pro Pens are cordless and battery free Eraser Pen stand Unscrew the base to access the nib removal tool and assorted replacement nibs Grip area Nib removal
104. recognizes and converts your handwriting into text and inserts it into a document Handwriting recognition must be turned on for this function to work See your Mac help for information on working with Ink EXPOSE Mac only Tiles all open windows To access this option first choose KEYSTROKE and then click on the ADD SPECIAL menu within the dialog box PRESSURE HOLD Contents Index Locks the pressure at the current pressure level until the button is released For example you can paint with pressure sensitivity until you reach the brush size that you like You can then press the button and continue painting with the same size brush until the button is released yy LJ 0 ore Contents FUNCTION NAME DESCRIPTION PRECISION MODE Changes the mapping around the current pen tip position so that you must move the pen farther for the screen cursor to cover a specific distance on the display screen This feature can be very useful for the precise control of pen or brush strokes You can adjust the precision setting when meeen md M assigning this function to a tool button To activate e For extensive use toggle on PRECISION sa versions MODE by pressing a tool button to which Precision mode settings apply to any tool used on this the function has been assigned itt Return to normal mapping by again Default Cancel ok pressing the tool button e For quick edits press and hold a tool button t
105. reen area in the MAPPING tab choose a TABLET AREA option FULL The entire active area of the tablet is mapped This is the default setting PORTION In the dialog box that appears choose a method for defining a portion of the tablet f Portion of Tablet Choose one of the following three ways to define Portion of Tablet 1 Drag Handles Position Rectangle For Tablet e Drag the corners of the rectangle to select the tablet area that will be mapped to your selected screen area e Select the CLICK TO DEFINE TABLET AREA button and use your tool on the tablet 2 Select Area with Tool to select the tablet area Be sure to Click to Define Tablet Area follow any MESSAGE prompts 3 Enter Coordinates in Counts e Enter coordinate values Top 0 Bottom 27939 Left 0 Right 44703 Message Cancel OK Contents Index _ le D 38 QT LJ 0 ore Contents BUTTON FUNCTIONS Customize Intuos pro for the way you like to work Simply use the Wacom Tablet control panel to change the button function that is assigned to a tool button ExpressKey Touch Ring or Radial Menu setting Button function options may vary depending on your tablet model Not all options are available for all controls or tablet models FUNCTION NAME DESCRIPTION CLICKS e CLICK Simulates a primary mouse button click Be sure at least one button performs this function so you can always navigate and click e RIGHT CLICK Simulates a ri
106. regulations require that all wireless devices be turned off when traveling in an airplane Turn off the Intuos Pro tablet wireless signal by turning off or removing the wireless module the tablet status LED s will be off and DO NOT power on the wireless module during takeoff transit or landing A Do not use Intuos Pro wirelessly in a facility control system or any other environment that requires extremely high reliability or where the use of a wireless device may cause interference Wireless operation may interfere with or cause other electronic devices to malfunction or other wireless devices may interfere with or cause the tablet to malfunction Where use of wireless products is prohibited power off or remove the wireless module ensuring the wireless signal has been turned off to prevent the possibility of it interfering with or causing other electronic devices to malfunction Wacom does not accept any liability for direct or consequential damages For details please refer to your Warranty located within the Important Product Information guide A Power off your tablet in locations where when electronic devices are not allowed Because the tablet may cause other electronic devices to malfunction in some locations where when the use of electronic devices is not allowed such as within an airplane be sure to turn off the tablet by unplugging the USB connector of this product from your computer OPTIMIZING THE WIRELESS CONNECTION If your scr
107. s for that application Note If you are using an application for which you have already customized your ExpressKeys those settings will take precedence over any automatic ExpressKey default settings provided by the driver for that application Settings will take effect automatically only if you have not entered your own ExpressKey settings for that application To view the current settings for the ExpressKeys press an ExpressKey to activate the ExpressKey display on your primary monitor The ExpressKey you touch appears highlighted in the display See Using the Expresskey display Note ExpressKeys can be operated in combination with one another For example customize one key for the CTRL function and another for ALT When you press both keys at the same time a CTRL ALT function is initiated Contents Index yy LJ C ore Contents USING THE EXPRESSKEY DISPLAY You can view the current setting for any individual ExpressKey at any time e Press an ExpressKey to activate the ExpressKey display on your primary monitor The ExpressKey you touch appears highlighted in the display e If an ExpressKey has been disabled it will be shown as disabled or there may be no display for that key e The display will fade out after 2 seconds on the screen e To disable the display choose the EXPRESSKEYs tab in the control panel and uncheck the box e You can view the display by pressing an ExpressKey set to touch toggle show settings
108. s fully charged e Analert symbol indicates battery charge is below 20 The actual feedback may vary depending Default on the actual status of your tablet and operating system See also Power saving features Battery status icon indicates tablet is in 3 95 1 minutes 20 V Show wireless tablet battery status in menu bar Enables or disables display of the battery status icon Contents Index yy LJ 0 ore Contents POWER SAVING FEATURES When configured for wireless operation Intuos Pro uses a number of power saving features to conserve the tablet battery charge and improve performance Power saving mode _ Tablet enters power saving mode after 2 minutes of no user input The time parameter can be adjusted in the Wacom Tablet control panel See Battery and wireless connection status Depending on your tablet model wake from power saving mode by touching the tablet pressing an ExpressKey or placing the pen in proximity Sleep mode Tablet enters sleep mode e When there is no wireless connection for more than 4 seconds For example you switch off the computer move the tablet out of range or unplug the wireless receiver To resume operations correct any problem and ensure the tablet is within range of your computer Then press the power button on the Wacom wireless module See Testing your tablet e After 30 minutes of no user input e When the battery level is extremely low Recharge the battery i
109. t a tablet status LED is illuminated If your tablet is plugged into a USB hub make sure the hub is connected and active e From the Go menu select UTILITIES and launch the SYSTEM PROFILER Select USB from the HARDWARE section of the CONTENTS list A Wacom USB tablet model should be listed If a tablet model is not listed check the USB tablet cable connection or try plugging the tablet into a different USB port If you are still having difficulties uninstall then reinstall the tablet driver software If this does not help contact Wacom for Technical Support See Contents Index QT LJ 0 ore Contents You suspect the tablet Use the Wacom Tablet Utility to work with your preferences Close any preferences may be open applications Open the main APPLICATIONS folder Then open the corrupted or want to make WACOM TABLET folder and run the WACOM TABLET UTILITY certain that all settings are at their factory defaults e t is a good idea to first back up your tablet preferences In the Wacom Tablet Utility select CURRENT USER or ALL USERS Then click BACKUP and follow the prompts e Then delete the tablet preferences as follows Single user When the utility starts select CURRENT USER and click REMOVE Log out then log back in When the tablet driver loads it will create a new preferences file with the factory defaults Multiple users When the utility starts select ALL USERS and click REMOVE Log out then l
110. tablet model supports touch be sure you have not turned off touch Be sure you are using the pen correctly Review using the Grip Pen Switch the wireless module off then back on If the battery charge is low try Charging the battery A wireless connection has been made but the tablet does not seem to work correctly Be sure you have correctly installed the tablet driver software See also Optimizing the wireless connection The tablet works when connected with the USB cable but turns off as soon as the cable is disconnected Contents Confirm the wireless module and receiver are correctly installed and that the wireless module is turned on Check the battery See Battery and wireless connection status e Open the tablet wireless compartment cover and verify that the battery is properly installed e Check the battery appearance to ensure there is no leakage or other indication of damage e Charge the battery overnight and try again If the problem persists the battery may be completely discharged or damaged and can no longer hold a charge You will have to purchase a replacement battery See Ordering parts and accessories Index yy LJ 0 Cree Contents The wireless LED does not Try again Then ae esi 1 Verify the Wacom wireless receiver is properly connected to an aE h a ee WESS active USB port If connecting to a USB hub make sure the hub is connected to an active USB port and
111. that the hub is active 2 Verify the Wacom wireless module is properly installed in the tablet Press the power button to connect wirelessly 3 Ifthe LED still does not light connect the USB cable between your tablet and computer On the wireless module check the battery status LED Amber indicates the battery is charging Green indicates the battery is fully charged If the LED remains off the battery may be defective Replace the battery 4 If both the tablet status and wireless module LEDs remain off then contact the Wacom support staff for the area where your product was purchased See When using the tablet the See Optimizing the wireless connection for tips on improving the screen cursor or pen strokes connection seem to lag or skip in some applications The battery charging process As required adjust your system power or energy saver settings so that seems to stop whenever the the computer does not enter sleep mode while the tablet battery is computer enters sleep mode charging Contents Index QT LJ 0 ore Contents WINDOWS SPECIFIC PROBLEMS You suspect the tablet Use the Wacom Tablet Preference File Utility to work with preferences preferences may be Close any open applications Click the START icon and select ALL corrupted or want to make PROGRAMS Then select WACOM TABLET and WACOM TABLET PREFERENCE certain that all settings are at FILE UTILITY their factory defaults e Itis a good id
112. the Pen Tablet controls USING THE PEN The Intuos Pro Pen is cordless and battery free It senses the amount of pressure and tilt you apply to it Optional pens may also be used with the Intuos pro See Using the optional Airbrush and Art Pen There are four basic techniques for using the pen on the active area of the tablet pointing clicking double clicking and dragging If you are unfamiliar with using the pen try the exercises on the following pages Note The pen disengages touch whenever the pen tip or eraser is within the tablet proximity range approximately 10 mm or 04 inch from the tablet surface Lift the pen and your hand away from the tablet active area to enable touch If you experience unintended touch actions manually disable touch by pressing an ExpressKey set to TOUCH ON OFF When done working with the pen press the ExpressKey again to enable touch You can also use the Wacom Tablet control panel to disable touch See Tablet controls Holding the pen Using the side switch Clicking Erasing Dragging Working with Tilt Contents Index yy LJ 0 ore Contents HOLDING THE PEN Hold the Grip Pen as you would a normal pen or pencil Adjust your grip so that the side switch is in a convenient location where you can easily toggle it with your thumb or forefinger Be careful not to accidentally press the switch while drawing or positioning with the pen Tilt the pen in any way that feels most comf
113. the double click distance e A large double click distance may cause a delay at the beginning of brush strokes in some drawing applications This may also cause a delay at the beginning of a drag action or inking stroke If you notice such effects try setting a smaller double click distance and using the side switch to double click You can also set an ExpressKey to double click Contents Index _ le D 30 yy LJ C ore Contents ADJUSTING ERASER FEEL To adjust the eraser sensitivity of your pen select the ERASER tab Select the function to perform when using the eraser Eraser Customizes the amount of pressure Eraser Feel needed to erase Erase x Soft Firm Click to further customize the eraser sensitivity Customize _ Current Pressure With your screen cursor positioned over an F empty area of the control panel press down on Click Full the tablet with the pen eraser Use the pressure bar to determine how hard you must press on the eraser to reach maximum pressure Default ADVANCED TIP AND ERASER PRESSURE SETTINGS To further customize tip or eraser pressure settings select the PEN or ERASER tab and click on the CUSTOMIZE button Options within the PEN FEEL DETAILS dialog box enable you to independently change the tip or eraser pressure sensitivity and click threshold settings Graphically displays the selected pressure sensitivity curve and click threshold sett
114. the tablet USB cable for damage e If you are connecting the tablet to a USB hub or hub device such as a keyboard with USB ports be sure the USB hub is properly connected to your computer and is active e fa status LED does not illuminate after your computer is on and has finished booting up your USB port may be disabled Verify that you have connected the tablet to an active USB port e Connect the tablet to a different USB port or try connecting to the USB port on another computer e For best results when troubleshooting no power to the tablet a status LED does not light plug the tablet directly into the system USB port located on your computer Temporarily eliminate any external hubs in use until you determine that the system recognizes the tablet and that it is functional When the tablet is working properly it is usually okay to then move the tablet to a USB hub 3 For wireless operation check the tablet connection A tablet status LED should glow whenever the tablet is properly connected and your computer has registered it as a USB device If not e Verify that the wireless module is on See Battery and wireless connection status e Verify that the wireless module and receiver are properly installed See Wireless setup e Check the battery power See Battery and wireless connection status If the battery charge is low connect the USB cable and charge the battery See Charging the battery e Switch the wireless module off
115. tings for the front most application set an ExpressKey to SETTINGS and press the key at any time See the following sections for more details Creating an application specific setting Removing application specific settings Contents Index E le D 49 yy LJ C ore Contents CREATING AN APPLICATION SPECIFIC SETTING First choose the TABLET and TOOL for which you want to create an application specific setting Click on the APPLICATION list button Tablet Intuos pro M ve E Z Ho 1 option or coram a Functions Touch Grip Pen Art Pen a Select Application Application lt A D Currently Open Applications All Other Illustrator Photoshop Photoshop Pen Eraser Mapping Tip Feel Tilt Sensitivity g Soft Firm Normal Customize Current Pressure o Double Click Click Right Click Selected Application Tip Double Click Distance Off Large Cancel Default Options Choose a method to select an application e In the CURRENTLY OPEN APPLICATIONS box select an application for which to create custom settings e BROWSE to select the executable file of any application installed on your computer The name of your selected application is displayed e Click OK to complete the process Note If two programs have the same executable file name they will share the same customized settings After adding an app
116. ts CONTROL PANEL Use the Wacom Tablet control panel to customize your Intuos pro tablet or tools When you open the control panel an icon for the Grip Pen or other tablet tool and a TOUCH icon are displayed in the Toot list To customize make changes to the tab controls Experiment with different settings to find what works best for you Any changes you make will take effect immediately Click DEFAULT to return to the factory settings Icons represent your TABLET TOOL and APPLICATION settings oC Be Wacom Tablet Prone Sa Tablet Tool Application w Intuos pro M i Functions Touch Art Pen A All Other Illustrator Photoshop i E E Pen Eras Tabs display customizable settings for the selected TooL bi sik Soft m Click er Mapping Tilt Sensitivity Firm Normal High Customize Current Pressure Double Click v Full Right Click X Tip Double Click Distance Displays information i dialog and option to Default DIAGNOSE your product About Options Displays Advanced To open the Wacom Tablet contro panel Choose FUNCTIONS to customize the ExpressKey Touch Ring and Radial Menu settings Display Toggle options are available on multiple monitor systems For touch sensitive tablets choose TOUCH to customize your touch settings See Setting the tou
117. ur region You can also discover which software applications are currently tablet enhanced to support the pressure sensitivity and other special functionality of your tablet by searching software applications USA Canada Central and South America https store wacom com us Europe Middle East and Africa http wacom eu Japan http tablet wacom co jp Asia Pacific English http wacom asia China Simplified Chinese http Awacom com cn Korea http wacom asia kr Taiwan http wacom asia tw Thailand http wacom asia th ORDERING PARTS AND ACCESSORIES Your Intuos Pro Pen tablet is the ultimate master tool for creative professionals The tablet combined with the Intuos Pro Pen and other available tools enables you to paint more intuitively illustrate more skillfully and edit imagery faster than ever before To purchase parts and accessories refer to the Wacom Store site for your region You can also do the following e Inthe USA or Canada call 1 888 884 1870 toll free or visit Wacom s web site at https store wacom com us USA only e In Europe call 49 0 180 500 03 75 or send an email to spareparts wacom eu Or visit http shop wacom eu You can also contact your local dealer distributor or technical support using the appropriate number for your region e In Japan visit http store wacom jp You may also contact your local dealer distributor or technical support using the appropriate number f
118. x to enable or disable display of the battery status icon in your system tray Contents Index yy LJ 0 ore Contents MANAGING PREFERENCES Use the Wacom tablet preferences utility to manage your tablet preferences for single or multiple users Windows 8 From the Windows 8 Start screen click the WACOM TABLET PREFERENCE FILE UTILITY tile If you are using Windows 8 Classic Desktop press the Windows key on your keyboard or select the Windows icon in the Charms bar to access the Start screen Windows 7 and Vista 1 Click the START icon and select ALL PROGRAMS 2 Select WACOM and WACOM TABLET PREFERENCE FILE UTILITY For all Windows systems set your preferences as follows 1 Close any open applications 2 Set your preferences as follows e Carefully follow any prompts that may appear e To back up your preferences click BACKUP under MY PREFERENCES e To restore preferences that you had previously backed up click RESTORE under MY PREFERENCES e To remove preferences for the current user click REMOVE under MY PREFERENCES e To delete preferences for multiple users click REMOVE under ALL USER PREFERENCES Note Administrator rights are required to delete preferences for all users Relaunch any currently open tablet aware applications that you may be running For Mac Open the main APPLICATIONS folder Then open the WACOM TABLET folder and run the WACOM TABLET UTILITY e Carefully follow any prompts that m
119. y first perform the recommended action in any error message that may appear on your screen If that does not solve the problem review the troubleshooting procedures in this chapter 2 Look in the Troubleshooting tables Your problem may be described there and you can try the solution offered 3 Visit http wacom com and choose the Wacom web site for your region to view the product FAQs Frequently Asked Questions 4 Ifyou are having a compatibility conflict between Intuos Pro and a new hardware or software product see for information on downloading an updated software driver Wacom periodically updates the software driver to maintain compatibility with new products 5 Test your tablet and Intuos Pro tools See Testing your tablet and Testing the tablet controls and tools 6 If you have tried the suggestions in this manual and still cannot resolve the problem contact Wacom Support See on how to obtain support for your region Testing your tablet Testing the tablet controls and tools Troubleshooting tables Contents Index _ le gt 65 QT LJ C ore Contents E e YOUR TABLET Turn on your computer and wait until the system has fully loaded 2 Check the USB connection A tablet status LED should glow whenever the tablet is properly connected and your computer has registered it as a USB device If not e Make sure the tablet USB cable is securely connected to an active USB port on your computer e Check
120. y and power management Battery life information Battery replacement Wireless module removal Wireless receiver storage Contents Index yy LJ 0 ore Contents WIRELESS SETUP Configure Intuos Pro for wireless operation 1 If you have been using Intuos Pro as a wired tablet disconnect the USB cable 2 Turn the tablet over Remove the wireless compartment cover s See A Slide cover s away from tablet body to remove Medium and large sized tablets are equipped with two covers one for the Wacom wireless module and one for the rechargeable battery Small sized tablets come with a single cover AS 3 Install the wireless components SN e Install the battery Align contacts B as shown and press into place See also Battery replacement Note Do not press straight down on the battery to install it Align the contacts and press that end of the battery into place before pressing down the other end e Install the wireless module Lift away and remove the wireless module spacer C Slide the wireless module into the tablet ensuring the connector is fully seated D Important Save the module spacer You may need it as a tool for removal of the wireless module See Wireless module removal e Replace the wireless compartment cover s Align and slide into place E gt e Connect the Wacom wireless receiver to an nS active USB port on your computer or USB L hub F aaa Gf E

WACOM Intuos - Pro User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents