Vision Fitness X6600HR User's Manual
Contents
1. 99 Vision Fitness All Rights Reserved 7 992. VISTONSN FITNESS To avoid possible damage to this Elliptical Trainer please follow these assembly steps in the correct order Before proceeding though enter your new Elliptical Trainer s serial number here Refer to this number when calling for service and also enter this serial number on your Warranty Card and in your own records Be sure to read your Owner s Guide before using your new Elliptical Trainer If any parts hardware or tools are missing please call 1 800 335 4348 Extension 12 NOTE It is recommended that you apply grease to the threads of each bolt as you assemble your Elliptical Trainer to prevent loos ening and noise Also during each assembly step ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt X6600HRC elliptical trainer TOOLS amp HARDWARE INCLUDED 5mm Allen Wrench Allen Wrench Screwdriver 5 L Shaped Wrench 13 Wrench 20 x 8 Bolt Quantity 6 ML x Bo Nylock Nut Quantity 2 Quantity 2 e Slide the rubber cover onto th console mast Unfold the console cable an attach it to the string located inside th console mast Guide the wire u through the mast while simultaneous slidi
3. ng the console mast onto ih rame bracket e Bolt the mast to the frame using t two bolts and two nuts make s these are tight Slide the rubber cover down over the bolt heads RUBBER BOOT e Install the rubber boot over the top of the lower right handlebar and slide to the bottom corner BLUE BAG e Mount the lower right handlebar to the frame tube using one of the bolts in the bag e Mount the upper right handlebar to the frame and lower portion of handlebar using two of the bolts in the bag RUBBER BOOT e Install the rubber boot over the top of the lower left handlebar and slide to the bottom corner BLUE BAG e Mount the lower left handlebar to the frame tube using one of the bolts in the bag e Mount the upper left handlebar to the frame and lower portion of handlebar using two of the bolts in the bag CONSOLE e Remove the four screws from the back of the console Plug the wire connectors from inside the mast into the console The cable connectors are slotted so do not force the connection Mount the console to the mast usin the four screws Do not pinch th cable 621 D East Lake Street PO Box 280 Lake Mills 53551 toll free 1 800 335 4348 phone 1 920 648 4090 fax 1 920 648 3373 www visionfitness com 19
Download Pdf Manuals
Related Search