Verilux VA02 User's Manual
Contents
1. Before setting the time confirm that the WAKE alarm setting is off Light Sounds lights must be OFF Setting the clock 1 Press amp hold the SET button until the HOUR begins to flash then release 2 To set the HOUR press the V or A button until you have reached the desired hour To confirm press the SET button the 641 MINUTE flashes Note For faster clock mode settings press and hold the V or A button 3 To set the MINUTE press the V or A button until you have reached the desired minute To confirm press the SET button the AM PM flashes 4 To set the AM PM press the V or A button To confirm press the SET button the MONTH flashes 5 To set the MONTH press the V or A button To confirm press the SET button the DAY flashes 6 To set the DAY press the V or A button To confirm press the SET button the YEAR flashes Note The day of the week will set automatically when the Month Day and Year are set 7 To set the YEAR press the V or A button To confirm press the SET button 8 The Time Date is now set 11 Alarm Setting Setting the V AKE alarm The Rise amp Shine Natural Alarm Clock Bedside Lamp allows you to wake gradually using one of the pre set wake time delay cycle options 5 15 30 60 minutes in combination with energizing Light Sounds or a combination of Light and Sound Example Alarm Time 6 30am Alarm Options Sounds2. IET LDK LIFE IN A BETTER L GHT INSTRUCTION MANUAL Rise amp Shine Deluxe Natural Alarm Clock Bedside Lamp IMPORTANT SAFETY INSTRUCTIONS CAUTION TO REDUCE THE RISK OF ELECTIC SHOCK DO NOT REMOVE ANY COMPONENTS THERE ARE NO SERVICEABLE PARTS INSIDE TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electric shock The exclamation point within an equilateral triangle as marked on the system is intended to alert the user to the presence of important operating and maintenance instructions in this installation guide Batteries Please dispose of used batteries properly following any local regulations Do not incinerate WARNING TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK OR PERSONAL INJURY e Turn off unplug and allow to cool before replacing bulb cleaning or other maintenance e Light bulbs get HOT quickly Do not touch the bulb while the lamp is on Do not look directly at the lighted bulb Do not operate the lamp in close proximity to flammable or combustible vapors such as aerosol spray products or where oxygen is being administered e Use only the type of bulb and maximum wattage indicated by the m
3. press the SET button the VVake SOUND flashes 5 To set the VVake SOUND press the V or A button to select the sound To confirm the VVake Sound press the SET button 541 re the Wake TIME flashes Wake Sounds include Birds e Forest e Harbor Rain e Town Wind Brook e Surf Buzzer n MIN 6 To set the Wake Time CYCLE press the V or A button until you have reached the desired time 2 Choices are 5 15 30 or 60 minutes To confirm the vvake time CYCLE press the SET 13 Snooze Alarm Reset Using the SNOOZE RESET function There are three vvays of svvitching off the alarm Snooze 24 Hour Alarm Reset Canceling the Alarm Hovvever if the alarm is not turned off after at the end of the alarm cycle it will continue to operate for approximately 30 minutes then turn off automatically 1 SNOOZE This restarts your alarm cycle after a 9 minute interval e To activate during the alarm tap SNOOZE RESET button Note alarm will begin again at the dimmest quietest setting and run for the entire wake cycle 2 24 HOUR ALARM RESET If you want the alarm mode to be stopped immediately but also wish to retain the same alarm setting for the following day For Sound only and Sound amp Light mode Press and hold the SNOOZE RESET during the alarm cycle until the sound goes off and the Alarm On icon on the display stops flashing e For Light Mode on
4. TOWN and Light Wake Ti le inut ake Time Cycle 30 minutes n 30 m The alarm vvill begin at 6 00am TAIN u 4 because of 30 minute time delay eycle 5 The sounds and light will start at a very Note When the Alarm is low level and will gradually increase to selected the maximum at 6 30am is displayed SELECTING THE ALARM MODE 1 To select the Alarm Options Light Sound first press the WAKE button Use the WAKE button to cycle through the alarm options l which illuminate to indicate settings Note The Alarm Option choice is also represented gly on the clock vl JJ Sound alarm ON display LIGHT SOUND Tnt 6 a 1 Now Sound and Light Se 7 N 1 N alarm ON J 3B min LIGHT SOUND o O Light alarm ON as LIGHT SOUND O ammor ey LIGHT SOUND SNOOZE ALARM 12 Alarm Setting SELECTING THE ALARMTIME 1 Press amp hold the SET button until the HOUR begins to flash then release 2 To set the alarm HOUR press the V or A button until you have reached the desired hour To confirm press the SET button the MINUTE flashes Note For faster clock mode settings press and hold the V or A button 3 To set the alarm MINUTE press the V or A button until you have reached the desired minute To confirm press the SET button the AM PM flashes 4 To set the alarm AM PM press the V or A button To confirm
5. lamp has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the lamp the lamp has been exposed to rain or moisture does not operate normally or has been dropped it should not be operated There are no user serviceable parts within this lamp 16 Modifications not authorized by the manufacturer will void the warranty and may result in personal injury SAVE THESE INSTRUCTIONS ON eg oN gt 3 Povver Suppiy AC Adapter Precautions N VVARNING To reduce risk of AC adapter povver suppiy failure e Avoid placing the AC adapter near heat sources or in direct sunlight e Keep AC adapter out of reach of small children Do not allow water moisture or foreign objects near the AC adapter e Do not cover the AC adapter with any objects CAUTION Always use the power adapter supplied with this product Do not use any other adapter Lamp could become damaged and warranty would become void Battery Precautions WARNING To prevent battery leakage which may result in bodily injury property damage or damage to the lamp Use only the size type of batteries specified When installing the batteries be sure to follow the correct polarity as indicated in the battery compartment Improperly inserted batteries may cause damage to the device Do not mix different types of batteries together alkaline and carbon zinc or old and new batteries Remove batt
6. pose a RISK OF FIRE OR PERSONAL INJURY 2 Attach the shade to the lamp by aligning the ring of the shade harp with the ring on the lamp socket push firmly down 3 Carefully Screw the bulb into socket DO NOT FORCE Set Up Instructions Connecting the AC Adapter 1 Plug the AC adapter cable into the back of the power connector labeled DC 12V 5A see A 2 Plug the power supply cord into the AC adapter see B and then into an AC wall outlet see C Note When AC adapter is plugged in the lamp will not draw any power from the batteries WARNING The AC adapter should be situated so that its N location or position does not interfere vvith its proper ventilation For example the AC adapter should not be situated near heat sources or in direct sunlight N VVARNING Do not cover the AC adapter vvith any obiects or materials Display and Controls Light Switch ON Off amp Dimming Radio ON OFF Nature Sounds 75 i Display 2 RAQIO 221 ak M 1 Programming FF Ou D HARBOR 5 30 uttons xU Volume VVake Alarm Options Slee Sound Light Snooze Alarm Reset P Alarm Options 5 15 30 60 minutes IMPORTANT This lamp may be sensitive to high levels of static electricity If the lamp powers off or the display becomes irregular reset by unplugging the power cord for a minimum of 15 seconds 10 Clock Setting HARBOR IMPORTANT
7. Alarm Clock Bedside Lamp within two feet of a wall and avoid placing directly in a corner Note Avoid placing your Rise amp Shine Natural Alarm Clock Bedside Lamp on a metal surface lt could interfere with AM reception Note Avoid placing this lamp and AC adapter in areas that are exposed to direct sunlight or close to heat radiating products such as heaters Do not place the lamp or AC adapter on the top of appliances that radiate heat 7 Set Up Instructions IMPORTANT Installation of batteries while not required is recommended prior to installation of the shade and bulb Installation of batteries is required for backup operation Inserting batteries for backup In the event that the Rise amp Shine Natural Alarm Clock Bedside Lamp loses power the clock time and alarm settings are stored in backup memory for up to 48 hours 1 Open the battery door located on the bottom of the lamp do not remove screw located adjacent to battery door 2 Insert four AA batteries not included according to the polarity indicated inside the battery compartment and replace the battery door Note With the backup battery power the batteries provide temporary power only for memory of the alarm settings the light will not function Shade amp bulb installation 1 Remove the clear cellophane protective wrap from the lamp shade CAUTION Failure to remove cellophane N protective wrap from the lamp shade may
8. GLE COLOR e To select a single color press the COLOR MODE button when the color you prefer is displayed stops the color fade cycle e Press the COLOR MODE button again to repeat fade cycle and select another color DISPLAY DIM The display brightness can be adjusted depending on personal preference e To select the display brightness select DISPLAY DIM HIGH LOW button on the side of the lamp Note For the best color display results set the HIGH LOW switch to the HIGH setting Note Orange and Red tones are preferred display colors for viewing the display without excess light at night 17 Please visit our vveb site at www Verilux com Call our Customer Service Department at 1 888 544 4865 NIET LD LIFE IN A BETTER LIGHT 340 Mad River Park VVaitsfield VT 05673 Printed in China for Verilux Inc Copyright 2007 Verilux Inc All rights reserved VA02 MAN Rev5
9. anufacturer e Never cover the bulb when it is in operation IMPORTANT SAFETY INSTRUCTIONS Read these instructions before using this lamp Keep these instructions for future reference Heed all warnings Follow all instructions Do not use this lamp in damp humid or wet locations For indoor use only Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions 9 Do not place near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 10 The lamp should be connected to a power supply AC adapter only of the type described in the operating instructions or as marked on the lamp and supplied with the lamp 11 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wider blade or third prong is provided for your safety If the provided plug does not fit in your outlet consult an electrician for replacement of the obsolete outlet 12 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the lamp 13 Only use attachments accessories specified by the manufacturer 14 Unplug this lamp during lightning storms or when unused for long periods of time 15 If the
10. de Lamp features Dimmer Memory an exclusive Verilux design that remembers the last light OFF intensity so the next time the light is switched ON the same brightness level will be recalled 15 Using the SOUNDS function The Rise amp Shine Natural Alarm Clock Bedside Lamp allovvs you to listen to 8 pre programmed s nature sounds at any time JJ FOREST anl e Birds e Harbor e Town e Brook e Surf e Forest e Rain Wind 1 To listen to sounds at any time press the SOUNDS button 2 To change sounds press the V or A button 3 To change the volume press the or button 4 To turn sounds OFF press the SOUNDS button again Radio Function Using the RADIO function 1 To turn on the radio press the RADIO button 2 Slide the AM FM selector switch to the desired choice 3 To select the station use the TUNER dial 4 To change the volume press the or button 5 To turn radio OFF press the RADIO button again NOTE To improve FM reception fully unwind the FM WIRE ANTENNA located on the back of the lamp and position it for best sound 16 Color Mode Function Using the COLOR MODE function The lamp features a Color Changing Display that can be set to fade between seven different colors or locked on one color SEVEN COLOR FADE e This is the default setting When the lamp is first plugged in the backlight is set to seven color fade mode SIN
11. eries when the lamp is not used for more than a week General Precautions gt Avoid placing this lamp and AC adapter in areas that are exposed to direct sunlight or close to heat radiating products such as heaters Do not place the lamp or AC adapter on the top of appliances that radiate heat Avoid placing the lamp in areas that are dusty humid moist and lack ventilation or are subject to constant vibration Not for use with light dimmers timers motion detectors or extension cords Do NOT use lubricating agent in bulb assembly Close supervision is necessary when this appliance is used by or near children or disabled persons WARNING This lamp is supplied with a shade designed specifically for this use with this product Use of any other shade other than the one supplied by the manufacturer may pose a SAFETY HAZARD CAUTION If outer glass of the bulb breaks avoid touching any metal components due to potential shock The bulb may continue to light however immediately turn power off and let the bulb cool before removal to avoid potential burn and discontinue use General Precautions This device complies vvith part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply wit
12. h the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Set Up instructions Unpacking Please check the shipping carton for the following items Shade Bulb AC Adapter Lamp Housing Pillovv Speaker If applicable Battery Compartment under the lamp Selecting a location e Place your Verilux Rise amp Shine Natural Alarm Clock Bedside Lamp on a table or other flat surface near your bedside For best performance place your Rise amp Shine Natural
13. ly Press and hold the SNOOZE RESET during the alarm cycle until the Alarm On icon on the display stops flashing n either case the light must be turned off manually by pressing the light switch button 3 CANCELING THE ALARM COMPLETELY To cancel the set alarm modes entirely Press the WAKE button until there is no WAKE alarm option Light Sound illuminated IMPORTANT If the LIGHT or LIGHT amp SOUNDS alarm mode is selected the light will remain on at the level when the SNOOZE RESET button is activated To turn the lamp off press the light switch button 14 Sleep Function Using the SLEEP function The Rise amp Shine Natural Alarm Clock Bedside allovvs you to fall asleep gradually using one n QED of the pre set Sleep Time Cycles 6 3 2 5 15 30 60 minutes VVhen using this feature the volume PA of the sound and or brightness of the light will gradually decrease over the Bilim set Sleep Time Cycle allowing you Q Q TAN to fall asleep gently Le 4 e First turn on the desired Radio mee Sound or Light function Then press the SLEEP button until you have reached the desired Sleep Time Cycle Choices are 5 15 30 or 60 minutes Lamp Function Using the LAMP function 1 To turn the light ON OFF push in the LIGHT knob 2 To dim or brighten the light rotate the knob left or right and hold ATTENTION The Rise amp Shine Natural Alarm Clock Bedsi
Download Pdf Manuals
Related Search