Uniden PRO630XL User's Manual
Contents
1. 25 AM CB Channels amp Frequetncles css cto one ai C RENE E LAND MARKER E FREE KE RR OU RR RR RR RR SARK Kx Cue 26 Li rz Inno METRE TT A rm 27 UNIDEN Model PRO630XL Introduction The Uniden PRO630XL is designed to provide you with years of trouble free service lts rugged components and materials are capable of withstanding harsh environments Please read this Operating Manual carefully to ensure you gain the optimum performance of the unit Features e Transmit amp Receive 40CH AM CB TX Power 4W e LCD Display with Backlight LCD Backlight brightness control LO Off e Mobile DIN Size Front Fire Speaker e Signal Strength Power Meter e ANL Automatic Noise Limiter Instant Priority Channel Programming e One touch Instant Priority Channel recalling e Dual Watch with Instant Priority Channel e Group Scan and Priority Watch Open Scan Scan Channel Memory On Off separately with Open Scan Group Scan The citizen band radio service is licenced in Australia by ACMA Radio communications Citizen Band Radio Stations Class Licence and in New Zealand by MED General User Licence for Citizen Band Radio and operation is subject to conditions contained in those licenses Rotary Channel Select Busy Channel Lock out Function Roger Beep Function On Off 5 Different Call Tones Volume Control with Power On Off Switch VOX Voice Ac2. Weak Signals AA Noise If you turn the Squelch fully counterclockwise it lowers the Squelch Gate to the extent that all signals get through weak medium and strong signals and noise 16 You must select a channel which is not in use before setting the SQUELCH control see p 17 for Selecting a Channel Strong Signals DD Weak Signals Noise To set the Squelch Gate to the desired level turn the squelch knob counterclockwise until you hear noise Then carefully turn the Squelch knob clockwise until the noise fades Now only strong signals get through UNIDEN Model PRO630XL Selecting a Channel Turn the Rotary Channel Selector at the base e to select the desired channel For your reference list of the available channels corresponding frequencies and guidelines for their use is printed on p 26 17 UNIDEN Model PRO630XL Programming the Instant Priority Channel Turn the Rotary Channel Selector at the base to select the CALL INST Instant Priority Channel you prefer Press and hold INST button on the microphone for 3 seconds to store the new setting INST icon appears Recalling the Instant Priority Channel PTT Momentarily press the INST button on the microphone at any time to return to the Instant Priority
3. PRI Priority Watch 4 Key Lock 16 GS Group Scan 5 INST Instant Priority Channel 17 Channel Frequency 6 VOX Voice Operated Microphone 18 SCAN Scan mode 7 BCL Busy Channel Lockout 19 DUAL Dual Watch 8 ROGER Roger Beep 9 BEEP Key Beep 10 Signal Power Level 11 S RF Receive Signal or Transmit 12 LIGHT LCD Backlight Brightness UNIDEN Model PRO630XL Included with your AM CB Radio Hanger amp Screws Standard Microphone AM CB Radio Owners Manual Washers and spare fuse DC Power Cord with fuse Mounting Bracket DIN E Sleeve DIN E rubber Mounting Screws Washer Stars ring and keys for vehicle And Screws installation Extension Cable EC100 and Rubber Bushing Dust Cover UNIDEN Model PRO630XL Optional Accessories External Speaker MS100 VOX Headset VMO91 10 UNIDEN Model PRO630XL DIN E Installation Mounting Using the DIN E Sleeve If you are unsure about how to install your PRO630XL in your vehicle using the DIN E sleeve consult your automobile manufacturer dealer or a qualified installer Before installing confirm that your PRO630XL fits in the desired mounting area and you have all the necessary materials to complete the task Your PRO630XL requires a 53 x 183 x 135 mm mounting area Allow an additional 60 mm space behind the unit for connectors and wires E m DASH RUBBER DIN E RING for DIN E SLEEVE _ A 1 Removethe br
4. UNIDEN Model PRO630XL Busy Channel Lockout If the channel is already in use i PRO630XL 9 you can prevent the CB Radio from transmitting 1 Press MENU ENTER four times The BCL setting flashes 2 Turn the Rotary Channel Selector at the base to change the setting between ON or OFF 3 Press MENU ENTER to store the setting 4 Press and hold MENU ENTER to exit from the menu mode If a button is not pressed within 10 seconds the AM CB Radio will automatically exit the Menu Mode SOIA Beep Press MENU ENTER five times The roger beep setting flashes PRO630XL 2 Turn the Rotary Channel Selector at the base to change the setting between ON or OFF 3 Press MENU ENTER to store the setting 4 Press and hold MENU ENTER to exit from the menu mode If a button is not pressed within 10 seconds the AM CB Radio will automatically exit the Menu Mode 23 UNIDEN Model PRO630XL Seen On Off Press MENU ENTER six times The Beep setting flashes EY PRO630XL f 2 Turn the Rotary Channel Selector at the base to change the setting between ON or OFF 3 Press MENU ENTER to store the setting 4 Press and hold MENU ENTER to exit from the menu mode Back Light 1 Press MENU ENTER seven times The Backlight setting flashes PN PRO630XL 5 2
5. Channel Transmitting The AM CB Radio uses the 40 AM CB Channels SIS LY Cimen Select the desired channel Press the microphone s PTT button and speak normally into the microphone Hold it approx 7cm from your mouth Release the PTT button to end the transmission and listen for a reply Call Function Press the microphone Call Button A three second ringing tone will be transmitted You may select from 5 types of tones see p 22 Current regulations require calling tones to be restricted to one transmission per minute If a second transmission is attempted within one minute then an error tone will sound DUAL Watch Dual watch will continuously monitor the Instant Priority Channel no matter what other channel is on see Programming the Instant Priority Channel above Press DUAL on the base DUAL icon appears and a short tone beep is heard To cancel DUAL Watch press DUAL on the base DUAL icon disappears 18 UNIDEN Model PRO630XL Scanning The AM CB Radio has a scanning feature that allows you to search for active channels automatically A NO Uniden hd 2 Furthermore the AM CB Radio is A E acc LI designed to have two types of scanning I Open Scanning OS and Group Scanning GS to give you flexibility allow you to use the radio effectively P
6. IC Jacks can not be used at the same time 13 UNIDEN Model PRO630XL Mounting the MIC Hanger The MIC Hanger comes in two parts How and where you mount the MIC Hanger will determine which parts to use Conventional Mounting with Screws Use the front part ofthe MIC Hanger only Locate a suitable mounting position and mark and drill two 3mm holes Fix the MIC Hanger into place with screws a YT Conventional Mounting with Double Sided Tape not supplied High quality Double Sided tape can be found at good retail stores Secure the front and back pieces of the MIC Hanger using the supplied binding screws Locate a suitable mounting position Apply high quality Double Sided tape onto the flat area of the MIC Hanger back piece and then press firmly to the mounting position 14 UNIDEN Model PRO630XL Mounting the MIC Hanger MIC Hanger mounted over MIC Cable The curly cord of the Standard Microphone can extend up to 1 5m For practical installation of the MIC Hanger mounted over MIC Cable use this method with the Extension Cable Standard Microphone 3 MIC plug EC100 Socket 2 13mm hole 1 Rubber Collar Dust Cover 6 Front MIC Jack Dust Cover Plan the location of the MIC Hanger to be within 2m of the Radio IE the length of the extension cable Connecting more than one extension cable together may compromise the audio performance of the microph
7. Turn the Rotary Channel Selector at the base to change the setting between OFF LO and HI 3 Press MENU ENTER to store the setting 4 Press and hold MENU ENTER to exit from the menu mode 24 UNIDEN Model PRO630XL Key Lock Use the Key Lock feature to prevent unexpected key changes N Uniden PRO630XL EE I AM RADIO TRANSCEIVER ENTER Press and hold ANL to turn key lock ON or OFF When Key Lock is ON PTT and VOX are still active The Key Lock setting is remembered when if power is turned off and on ANL Automatic Noise Limiter N Uniden PRO630XL 2 IVE Mr UT AM RADIO TRANSCEIVER ENTER ANL will reduce harsh background noise caused by some interference Momentarily press ANL w the ANL icon appears 25 UNIDEN Model PRO630XL AM CB Channels amp Frequencies The PRO630XL will only operate on the frequencies of the country of original purchase The frequencies cannot be changed from one country to another It is illegal to operate a PRO630XL set on Australian frequencies in New Zealand or a PRO630XL set on New Zealand frequencies in Australia Road Channel for Australia New Zealand Model is shown in BOLD in the table Modulation AM Transmit Power each channel 4W CH NO Frequency CH NO Frequency Australia MHZ New Zeal
8. Uniden AM CB RADIO TRANSCEIVER PRO630XL UNIDEN Model PRO630XL Introduction Fellini 3 Preventive ia ios vic 4 Wie 103 Fe EEE 4 Controls A iii aria 5 gis ier io ETT 8 Included with Your AM CB acribit In rex Erde KKR RR rns rdi RR RR KRO Xn nds 9 Optional Accessories iii 10 Bi Ae Ag O 11 Connecting the CIC SOM Au yq aa ident 13 Mounting Ine MIC iii iii 14 Operation TOMNA R the POWGT 16 Setting the Manual S QUE Cira 16 Selecting Chanel in 17 Programming the Instant Priority 2 18 Recalling the Instant Priority 18 WES FERRARO A 18 PA 18 BIRRE Re e add 18 IRR GERI 19 Open Scan OSIMO 20 Group Scan CS MOUE eisereen erp iii 20 PRONI YVA ee E PP A PRO O PO A 21 Add Remove Channels from SCAN Memory 21 VOX Operation optional VOX headset required i 22 Selecting the Call TOFIG 22 BisyChannel Lockolir aca 23 BOS NEN NE RTT 23 O A 24 DONE M MIN 24 o dice RU Umm 25 mu desc sEuIlst
9. acket if previously attached 2 Install the DIN E sleeve into the opening in your dashboard lip facing out 3 Push out the top and bottom tabs to hold the sleeve firmly in place 4 Remove the flat rubber ring fitted around the cabinet sides near the front of the PRO630XL Fit the supplied DIN E rubber ring in it s place When fitted the rubber ring will act as a seal against the DIN E sleeve At the left and right sides of the ring there will be a slot space The slots in the fitted DIN E Rubber Ring will enable proper removal of radio from the DIN E sleeve 5 Before inserting the PRO630XL in the sleeve attach the cable from the previously mounted antenna Attach the DC Power leads RED goes to a positive connection on your fuse block while BLACK connects to the vehicles chassis ground Be sure all the connections are routed away from any potentially pinching or slicing sheet metal 6 Slowly slide the PRO630XL into the sleeve until it locks in place If you plan to use the Rear MIC Jack or connect an external speaker at a later time expect to remove the unit for ease of making those connections 11 UNIDEN Model PRO630XL DIN E Installation Removing the PRO630XL from the DIN E Sleeve If you plan to use the Rear MIC Jack or connect an external speaker at a later time you should plan to remove the PRO630XL from the DIN E sleeve This is easily done using the provided Removal Keys Fully insert both Removal K
10. and MHZ 06 27025 0 26390 208 27055 08 26420 0 27065 09 26430 15 2715 15 26500 20 27 205 20 26 570 26 UNIDEN Model PRO630XL UNIDEN PRO630XL AM CB TRANSCEIVER RADIO Two Year Limited Warranty IMPORTANT Evidence of the original purchase is required for warranty service Warrantor Uniden Australia Pty Limited ABN 58 001 865 498 Uniden New Zealand Limited Elements of Warranty Uniden warrants to the original retail owner for the duration of this warranty its PRO630XL AM CB TRANSCEIVER RADIO hereinafter referred to as the Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below Warranty Duration This warranty to the original retail owner only is only valid in the original country of purchase and shall be of no further effect 2 years after the date of original retail sale This warranty will be deemed invalid if the Product is A Damaged or not maintained as reasonable and necessary B Modified altered or used as part of any conversion kits subassemblies or any configurations not sold by Uniden C Improperly installed D Repaired by someone other than an authorized Uniden Repair Agent for a defect or malfunction covered by this warranty E Used in conjunction with any equipment or parts or as a part of a system not manufactured by Uniden F Only available in the original country of sale Parts Covered This
11. egularly when Priority 4 Watch 5 AM RADIO TRANSCEIVER If the Instant Priority Channel becomes active the radio will stay on that channel for as long as the signal is present If the received signal ceases GS Scanning continues after 3 seconds If scanning stops on a channel which is not a Instant Priority Channel AM CB Radio will continue monitoring the Instant Priority Channel for activity while listening to the active one To deactivate SCAN press the SCAN OS GS button 20 UNIDEN Model PRO630XL Operation Priority Watch To switch Priority Watch On Off 1 2 p Press MENU ENTER one time The Priority Watch setting flashes Turn the Rotary Channel Selector at the base to change the setting between ON or OFF Press MENU ENTER to store the setting Press and hold MENU ENTER to exit from the menu mode If SCAN is deactivated while it is tuned to an active channel the AM CB Radio will stay on that active channel If none of the channels are active the AM CB Radio will reinstate the scan start channel If OS GS Scanning is initiated when there are no channels programmed in OS GS memory an error tone will be heard and scanning will not start see Programming Scan Channels below Add Remove Channels from SCAN Memory Select which Scanning Mode you wish to use OS or GS Select the channel you want to store Press to MEM store M icon appears and a short tone be
12. el PRO630XL Controls Connectors PRO630XL Front View CHANNEL MN DUAL ANL INST SCAN GS PRI M AM RADIO TRAN SCE VER e MIC Controls and Connectors 1 Rotary CHANNEL Selector 6 SCAN Scan On Off 2 MENU ENTER Menu and Select OS GS Open or Group Scan Button 7 Liquid Crystal Display LCD 3 DUAL Dual Watch 8 SQ Rotary Squelch control 4 ANL Automatic Noise Limiter 9 VOL Rotary Volume control Q Key Lock ON OFF Power On Off control 5 Memory Scan Channels 10 MIC Front MIC Jack UNIDEN Model PRO630XL Controls Connectors PRO630XL Rear View Connectors 11 Power Input Connection 13 8VDC 12 Ext Speaker Jack 13 Rear MIC Jack 14 Antenna Connection UNIDEN Model PRO630XL Controls Connectors Standard Microphone Controls and Connectors 15 CALL Call Tone Button 16 INST Instant Priority Channel Button 17 PTT Push To Talk Button 18 19 RJ45 type plug 20 Front MIC Jack Cover UNIDEN Model PRO630XL 6 LCD not to scale ii ants ome NINE Add SS ASS Indicators 1 TX Transmit 13 Channel Number 2 ANL Automatic Noise Limiter 14 M Channel in Memory 3 BUSY Channel Active 15
13. ep is heard S Sor ero I To remove the channel from SCAN memory gt 2 E AM RADIO TRANSCEIVER press MEM once more 2 2 icon disappears N VOL Uniden PRO630XL Y 21 UNIDEN Model PRO630XL VOX Operation optional VOX headset required 1 Selecting the Call tone 1 Press MENU ENTER two times The VOX setting flashes S PRO630XL Turn the Rotary Channel Selector at the base to change the VOX sensitivity oF OFF 1 highest 9 lowest Press MENU ENTER to store the setting Press and hold MENU ENTERI to exit from the menu mode Disconnect Standard Microphone and connect the VOX headset VOX function works only when connected in place of the Standard Microphone The optional VOX Headset and Standard Microphone cannot be connected at the same time If a button is not pressed within 10 seconds the CB Radio will automatically exit the Menu Mode N Press MENU ENTER three times 2 PRO630XL The call tone setting flashes i Turn the Rotary Channel Selector to change the setting between C1 C2 C3 C4 and C5 Press MENU ENTER to store the setting Press and hold MENU ENTER to exit from the menu mode If a button is not pressed within 10 seconds the AM CB Radio will automatically exit the Menu Mode 22
14. eys straight into the slots on the left and the right edges of the radio s dress panel You cannot remove the radio if only one key is available Press in fully and the radio will unlock from the sleeve making withdrawal from the sleeve possible Store the keys in a safe place for future use 12 UNIDEN Model PRO630XL Connecting the Microphone Front MIC Jack Rear MIC Jack INL 70 RADIO TRANSCEIVER Front MIC Jack Push the MIC plug at the end of the microphone into the MIC Jack until the connection locks into place Gently tug the MIC cord to test that the connection is locked Use the Front MIC Jack cover which is threaded onto the MIC cord to seal the MIC Jack entry from dust Disconnecting the MIC from the Front MIC Jack Pull away the threaded rubber collar and move it down along the cord Using the flat blade of a screwdriver or similar object carefully press the lock tab at the bottom side of the MIC plug and push it upwards At the same time tug on the MIC cord to draw back the MIC plug Rear MIC Jack Use the Rear MIC Jack if the main base is mounted where a Front MIC connection is intrusive or if you wish to use Standard Microphone with the extension cable Peel the dust cover from the Rear MIC Jack Push the MIC plug at the end of the microphone or extension cable if using the extension cable into the MIC Jack until the connection locks into place The Front and Rear M
15. one The plug of the extension cable connects to the Radio The socket end of the extension cable connects with the microphone plug 1 The rubber collar dust cover on the microphone cable is not required and can be pushed out of the way along the cable Drill a 13mm hole at the MIC Hanger location Thread the microphone plug through the hole and connect with the extension cable Mount the MIC Hanger over the hole and cable At the Radio Remove the Rear MIC Jack label and connect the extension cable plug Place the Rubber Bushing Dust Cover over the unused Front MIC Jack Push the edges of the Dust Cover to fit over the Jack opening 15 UNIDEN Model PRO630XL Operation Turning on the Power Australian AM CB frequencies are shown in the LCD Display examples Turn the radio ON by rotating the Volume ON OFF control clockwise 7 CHANNEL 7 Setting the Manual Squelch Turn the outer ring of the SQ control at the base to adjust the Squelch Strong Signals J Medium Signals Weak Signals Think of the squelch control as a gate If you turn Squelch fully clockwise it raises the Squelch gate so high that no signals get through Strong Signals Medium Signals
16. ress SCAN OS GS and Scanning starts AM RADIO TRANSCEIVER The SCAN icon appears The scan direction can be changed at any time by rotating the channel selector left 19 UNIDEN Model PRO630XL Open Scan OS Mode Allows continuous scanning of all selected channels If an active channel is found scanning will stop on that channel If the received signal ceases the unit will wait 3 po RM seconds for the signal to return otherwise scanning resumes i After transmission in scan mode the unit will wait 20 seconds for the signal to return otherwise scanning resumes To skip the active channel turn the Rotary Channel Selector at the base To deactivate SCAN press SCAN OS GS If SCAN is deactivated while on an active channel the AM CB Radio will stay on that active channel If no channels are active the AM CB Radio will reinstate the starting channel OS Mode is indicated by the absence of the GS icon Group Scan GS Mode Includes the accessory feature Priority Watch which allows you to monitor the Instant Priority Channel while scanning see p 18 for setting Instant Priority Channel and p 21 to turn on Priority Watch To use GS Mode Scanning press and hold N voL SCAN OS GS GS icon appears on the D eres Uniden PRO630XL display D n GS Scanning checks the Instant Priority US cb 965 LI Channel for activity r
17. tivated Function 10 Step VOX Mic sensitivity adjustment Front and Rear MIC Jacks for increased mounting options Extension Cable for Rear MIC Jack Rubber Bushing dust cover for Front MIC Jack UNIDEN Model PRO630XL Introduction Preventive Maintenance The following system checks should be made every six to twelve months e Check the Standing Wave Ratio SWR e Inspect the tightness of all electrical connections e Inspect the antenna coaxial cable for wear or breaks the shielding e Inspect the tightness of all screws and other mounting hardware Troubleshooting Should the unit malfunction or perform poorly follow these procedures If the transceiver is completely inoperative Check the power cord and fuse If there is trouble with receiving Check the VOLUME control setting Be sure the SQUELCH is adjusted properly Possibly the radio is over squelched If there is trouble with transmitting Check that the transmission line coaxial cable is securely connected to the ANTENNA connector Check that the antenna is fully extended for proper operation Check that all transmission line coaxial cable connections are secure and free of corrosion Blackening may occur on the Liquid Crystal Display if the AM CB Radio has been subjected to extreme high temperature above 60 C This is not a fault Normal LCD operation resumes when the temperature stabilizes back to standard operating condition 0 55 C UNIDEN Mod
18. warranty covers for two 2 years the Product and included accessories Statement of Remedy In the event that the Product does not conform to this warranty at any time while this warranty is in effect the warrantor at its discretion will repair the defect or replace the Product and return itto you without charge for parts and service This warranty does not provide for reimbursement or payment of incidental or consequential damages This EXPRESS WARRANTY is in addition to and does not in any way affect your rights under the TRADE PRACTICES 1974 Cth Australia or tte CONSUMER GUARANTEES ACT New Zealand Procedure for obtaining performance or warranty in the event that the Product does not conform to this warranty the Product should be shipped or delivered freight prepaid with evidence of original purchase e g a copy of the sales docket to the warrantor at UNIDEN AUSTRALIA PTY LTD UNIDEN NEW ZEALAND LTD Service Division Service Division 345 Princes Highway 150 Harris Road Rockdale NSW 2216 East Tamaki Manukau 2013 Fax 02 9599 3278 Fax 09 274 4253 www uniden com au www uniden co nz 21 Uniden 2008 Uniden Australia Pty Limited Uniden New Zealand Limited Printed in China UTZZ01377ZZ 0
Download Pdf Manuals
Related Search