Triarch 75141 User's Manual
Contents
1. Assembly amp Installation Instructions CAUTION 1 TURN OFF THE ELECTRICTY AT THE FUSE BOX OR CIRCUIT BREAKER BEFORE INSTALLATION 2 RLSK OF FIRE DO NOT LAMP FIXTURE GREATER THAN THE MAXIMUM WATTAGE SHOWN ON THE WATTAGE LABELS ON THE FIXTURE 3 IF YOU ARE UNFAMILIER WITH ELECTRIC WIRING CONSULT A QUALITIED ELECTRICIAN TO INSTALL THIS FIXTURE FOR YOU FOR WALL BRACKET 1 Disconnect power at main electrical panel before installation 2 Thread the mounting screws into the opposite side of the Universal strip from the GREEN gound screw 3 Guide fixture vires through hole in center of Universal strip 4 Attach Universal strip to outlet box usi 5 Following wiring instruction carefully listed below 6 Mount fixture by aligning mounting holes in backplate box screws provided with outlet box th mounting screws and threading ball nuts onto mounting screws Tighten to firmly hold Back plate in place against wall nouiting screws may require adjustment 7 Open main frame bottom cap and glass shade or just thread out the threaded nut see attached respective drawing install candle tubes onto sockets and install ligat bulbs not included See relamping label at candle tube for type and maximum allowed wattage then slip glass shade bottoa cap and main frame up through bottom threaded pipe and secure all together by fastening with fintal or just firely secure glass shade with threaded nut see attached respective draw2. ing parka owman WS Box Saen SY Wiring 1 Split the conductors of the fixture wire about 6 inches Back plate Being carefull not to expose any of the wire inside of the insulation 2 Connect the fixture ground wire to the outlet box ground wire using wirenut not provided Connect outlet box ground wire to mounting plate with GREEN hex ead ground screw Knurled to tapped hole in mounting strap marked GND as shown 3 Connect the haf of tne fixture wire that is white marked or has a ribbed surface to the outlet box supply wire WHITE Connect the other half ofthe fixture wire that is black unmarked or nas a smooth surface to the outlet box supply wire BLACK or RED Use wirenuts provided 4 Spread the electrical splices so that the black wires are on one side of the outlet box and the white wires are on the other side it Bird Ara Top cap Ceter tube Bulbs H not included E Candle tubes oo Screw tias shade p gt Hain frane pmm White Mared or Robo Outat Box bsa Ground Wire Green Ground Screw 3 Whale Supply Wire tack Unmarked or Smooth Fosure ico Fouro Ground Wee Grounding Detail Black or Rea Supply We COPYRIGHT 2003
Download Pdf Manuals
Related Search