Transition Networks ETHERNET E-TBT-MC01(LC) User's Manual
Contents
1. Ethermnet RANSTTION 1LOBaseT Transceiver Na EEA E TBT MCO1 LC The Ethemet10BaseT Transceiver E TBT MCO 1 LC connects an AUI cable and connector to a 10BaseT twisted pair cable and RJ 45 connector INSTALLATION INSTRUCTIONS ha Connecting the 10BaseT Transceiver 1 Connect the AUI connector of the 10BaseT Transceiver to the AUI port on the PC either directly or through an AUI cable maximum AUI cable distance 50 meters 165 feet Connect the RJ 45 of the LOBaseT Transceiver to a STRAIGHT THROUGH male male 10BaseT cable Connect 10BaseT cable to hub Kela 7 On Off AUI DB 15 Ethernet 10BaseT Transceiver SQE Heartbeat Enable The SQE switch should be enabled ON when the 10BaseT Transceiver is connected to a DTE or workstation Disable The SQE switch should be disabled OFF when the 10BaseT Transceiver is connected to the AUI port of an Ethernet repeater such as the model 1003 1OBaseT hub FCC APPROVAL This equipment has been tested and found to comply with the limits for a class A digital device pursuant to part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment this equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may ca2. use harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense phone 612 941 7600 toll free 800 LAN WANS 800 526 9267 eM dvewen st fax 612 941 2322 bulletin board 612 941 9304 Minneapolis MN 55344 USA info transition com techsupport transition com toll free tech support USA 800 260 1312
Download Pdf Manuals
Related Search