TANDBERG Edge D13922.06 User's Manual
Contents
1. Turn the unit upside down and mount the rubber feet over the screws Insert the rubber plug in the hole that held the screw just unscrewed 9 Rubber plug 92205_Edge_lnstallation_Sheet_Feb08 indd CAUTION Do not screw the screw back in if the base has been removed and the bracket is not to be used Doing so may damage the codec s interior and will void the warranty Use the enclosed rubber plug instead Please read the user documentation for further details as NZ TANDBERG This box contains TANDBERG Edge unit TANDBERG Precision HD camera Edge unit wall mounting bracket Precision HD camera bracket Screwdriver PH2 Rubber feet and plug Microphone and microphone cable HD camera cables 2m amp 5m LAN cable ISDN cables DVI I to DVI I cable for monitor connection DVI I to VGA adapter S Video cable RCA to RCA cable DVI I to VGA cable with mini jack to stereo RCA Audio cable for PC connection Audio cable RCA to 2xRCA 2x RCA to stereo mi2. Suitable screws at least 4X15 to mount bracket on wall not l Put the Edge J Unscrew the base using the included Each screw l i must be able to sustain codec on its back enclosed screwdriver at least 10kg when bracket is mounted Screwdriver to mount bracket on wall not included Use screws in all four holes for mounting Do not TEJE rely on the center hole alone CAUTION Never use other screws than the 20mm screw already attached to th
3. D ip f C Desktop Use Using the unit out of the box Put it on the desktop connect cables as shown to the far right and it is ready to use CAUTION Never place the unit as shown without the base mounted Placing the unit on a shelf PT Put the Edge codec on its back 2 TANDBERG TIP If the menu is not already present press the OK Menu key on the remote control to open the menu Navigate in the menu with arrow keys and OK 94JgANVL E Unscrew the base using the enclosed screwdriver
4. e wall bracket Do not remove this screw Using other screws may damage the codec s interior and will void the warranty D13922 06 MARCH 2008 D 10 03 2008 09 56 30 TY NZ 92205 _Edge_Installation_Sheet_Feb08 indd
5. ni jack adapter Cable sleeve Cable ties Power supply with cables TANDBERG Remote Control and batteries User Guide on CD Registration card TANDBERG Precision HD Camera The Camera must be installed properly by aligning the camera on the fixing bolt and the magnets on the camera bracket T DVI I to DVI I pi e Installation of the camera bracket with the TANDBERG Flat Panel Display Option A wall mounted screen must have minimum 140mm distance from the front of the screen to the wall Composite S video Installation Sheet TANDBERG Edge TANDBERG LAN Ethernet Microphone Monitor Installation Sheet TANDBERG Edge Wall Mounting Equipment needed PT Decide where to mount the Edge codec Remove the monitor Mount the bracket on the wall Make sure there iS Space for all cables when the Bracket with screw DO NOT MOUNT IT HERE monitor is put back eed included pacommended _ DL a a in place Also make mounting sure that the cable Screwdriver to 9 m EN connections will be ee remove the base and Alternative well hidden behind Ss Wh mount the bracket mounting the monitor included Hose sleeve to 4 accommodate the _ os cables between the codec and Alternative the monitor and mounting camera included
Download Pdf Manuals
Related Search