Swann SW234-PC2 User's Manual
Contents
1. It is available at www swannsecurity com Power Record LED Hidden Camera Reset Switch Hidden USB Port Twist to reveal Rubberized Grip Twist to expose pen tip Working Pen Tip Top of PenCam MEES Bottom of PenCam aay A i Powering the PenCam On Off Powering On the PenCam 1 Push and release the button on the PenCam 1 time 2 The orange light will turn on 3 Wait 5 to 10 seconds for the PenCam to load and boot up 4 After the PenCam has finished booting it will automatically begin recording indicated by the blue light Push the button 1 time to power on the PenCam IMPORTANT NOTE You must wait until the PenCam has finished booting and the light has turned blue before pressing the button again otherwise there may be data loss or undesired results Powering Off the PenCam 1 If the light is blue push and release the button one time to stop recording and wait until the light turns orange 2 When the light is orange push and hold the button to power off the PenCam fecording and Standby Modes m Standby Mode When the orange light is on the PenCam is in standby Push the button 1 time to begin recording If you are powering on the PenCam it will automatically begin recording do not push the button while the PenCam is booting Recording Mode The blue light indicates the PenCam Is currently recording Push the button 1 time to stop recording The PenCam may take2. several seconds to process and save the recording Orange indicates standby mode Blue indicates currently recording IMPORTANT NOTE When stopping a recording push the button only 1 time The PenCam will write the video to memory Depending on the length and com plexity of the video there may be several seconds delay Do not push the button again during this time or data loss may occur The PenCam has a built in lithium ion battery that provides approximately 90 minutes of power when fully charged cs i z y a A a Unscrew the PenCam to reveal the hidden USB port Charge the PenCam by connecting the hidden USB connector inside the PenCam to a USB port on your computer The PenCam will flash orange indicating it is charging Full charge time is approximately 2 hours IMPORTANT NOTE Before using the PenCam for the first time connect it to a USB port and charge for the full 2 hours
3. the correct drivers Navigate to the Removable Disk in My Computer to view copy or delete Tiles just like a portable hard drive or flash drive Playback video recordings on your PC with media players such as VLC winDVD powerDVD etc capable of decoding H263 format AVI Tiles IMPORTANT NOTE If you are unable to view videos on your PC install the codec pack software named klcodec417s exe stored on the PenCam or down load from www swannsecurity com Setting the Date amp Time To set or change the Date amp Time 1 Connect the PenCam to your PC 2 Create a new txt file using Windows Notepad 3 Type the date amp time in the following format YYYY MM DD HH MM SS ex 2009 03 13 11 53 58 4 Save the Tile as userconfig txt and place in the root directory of the PenCam 5 Remove the PenCam from the computer and turn on the PenCam Videos will now be time stamped with the updated date amp time Note Current date and time settings may be lost if the PenCam is formatted or completely drained of battery power Deleting amp Formatting the PenCam If the PenCam is full or operates slowly delete unwanted files from the PenCam when connected to your computer IMPORTANT NOTE If you format the PenCam all data will be permanently lost including the codec pack and userconfig txt file with the current date amp time settings To reset the date amp time follow the instructions above If you require the codec pack again
4. Helpdesk Technical Support Details Swann Technical Support All Countries E mail tech swannsecurity com Telephone Helpdesk AUSTRALIA toll free 1300 138 324 M 9am 5pm AUS ET Tu F lam 5pm AUS ET Sa lam 9am AUS ET NEW ZEALAND toll free USA toll free 800 627 2799 Su 2pm 0pm US PT M Th 6am 0Opm US PT F 6am 2pm US PT USA Exchange amp Repairs 800 627 2799 0800 479 266 M F 9am 5pm US PT INTERNATIONAL 61 38412 4610 See http www worldtimeserver com for information on time zones and the current time in Melbourne Australia compared to your local time Warranty Information 1 Swann Communications PTY LTD 12636 Clark Street Building 4 650 Church Street Santa Fe Springs CA 90670 Richmond Victoria 312 USA Australia Swann Communications warrants this product against defects in workmanship and material for a period of one l year from it s original purchase date You must present your receipt as proof of date of purchase for warranty validation Any unit which proves defective during the stated period will be repaired without charge for parts or labour or replaced at the sole discretion of Swann The end user is responsible for all freight charges incurred to send the product to Swann s repair centres The end user is responsible for all shipping costs incurred when shipping from and to any country other than the country of origin Swann Communications USA Inc The warranty does not cover any i
5. ete video you do not need from the PenCam As the memory fills up the PenCam may take longer to process and save Problem Some of my videos won t play on my computer Solution Videos can become corrupt and will not play if the PenCam is not used as described in this manual Pushing the button several times or holding the button can result in corrupt videos Wait until the PenCam has finished processing before pressing the button again Problem Is it legal to record people in my country Solution It is your responsibility to research the local laws and conditions of use for recordings Problem can t see any video on my computer Solution Install the codec pack klcodec417s exe stored on the PenCam or from our website www swannsecurity com echnical Specifications Video Video Format Resolution Video File Size Recording Recording Mode Total Storage Time General Operating System Internal Memory Backup Type Battery Type Charging Record Time per Charge Battery Charging Time Dimensions Weight AVI 352 x 288 gt 500KB per min Manual Recording Continuous up to 3 Hours 2GB Windows XP Vista 2GB or 4GB USB Rechargeable Lithium ion USB via computer Approximately 90mins Approximately 2 hours 150mm x 15mm x 15mm 5 9 KUO XUGO 10z 30g Downloading and Viewing Video When the PenCam is connected to a PC Windows XP and Vista will automatically recognize the device and install
6. ion which can be deter mined by turning the equipment off and on the user is encouraged to try to cor rect the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help IMPORTANT Prohibition against eavesdropping Except for the operations of law enforcement officers conducted under lawful authority no person shall use either directly or indirectly a device operated pursu ant to the provisions of this Part for the purpose of overhearing or recording the private conversations of others unless such use is authorized by all of the parties engaging in the conversation WARNING Modifications not approved by the party responsible for compliance could void user s authority to operate the equipment IMPORTANT SAFETY INSTRUCTIONS Make sure product is fixed correctly and stable if fastened in place Do not operate if wires and terminals are exposed Package Contents PenCam Recorder m Operating Instructions Ink Refill The PenCam is already pre loaded with an ink cartridge There is no need to change the cartridge unless the pen is out of ink 2 froubleshooting Guide Problem The PenCam takes a long time to boot or save recordings Solution Del
7. ncidental accidental or consequential damages arising from the use of or the inability to use this product Any costs associated with the fitting or removal of this product by a tradesman or other person or any other costs associated with its use are the responsibility of the end user This warranty applies to the original purchaser of the product only and is not transferable to any third party Unauthorized end user or third party modifications to any component or evidence of misuse or abuse of the device will render all warranties void By law some countries do not allow limitations on certain exclusions in this warranty Where applicable by local laws regulations and legal rights will take precedence Swann Swann Communications 2008 Swann Advanced security made easy PenCam Recorder plug amp playsecurity Mini Video Camera amp Recorder DVR 420 SW234 PC2 SW234 PCG www swannsecurity com SR234 PC2 10006 130309 Before You Begin FCC Verification NOTE This equipment has been tested and found to comply with the limits for Class B digital device pursuant to part 15 of the FCC Rules These limits are de signed to provide reasonable protection against harmful interference in a residen tial installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio or television recept
Download Pdf Manuals
Related Search