Sony PLM-S700 User's Manual
Contents
1. EJ SEL EXEC If you have set the Glasstron to operate without a password go to step 3 Turn the PUSH DISPLAY jog dial to enter the first number of your password then press the jog dial Enter the second and third numbers in the same way ENTER THE THIRD NUMBER OF YOUR PASSWORD Entered password PUSH DISPLAY INCORRECT PASSWORD ENTER THE FIRST NUMBER AGAIN If you enter a wrong password the z message shown on the right appears Enter the correct password SEL d EXEC If you have entered a wrong password more than five times after about ten INCORRECT PASSWORD seconds the Glasstron turns off SEE THE USER S MANUAL automatically Follow the instructions on the screen Warning message Follow steps 3 through 7 in Checking the display unit position pages 23 through 25 After carefully reading the warnings and checking the display unit position press the jog dial Screen alignment Follow steps 1 through 3 in Checking the screen position alignment pages 25 through 27 Read the warning carefully and press the jog dial Make sure the left and right screens are aligned and press the jog dial Select the input signal using the PC VIDEO switch Select PC RGB signal or VIDEO video When you select PC PC mode signal depending on the connected PC RGB equipment CREED PC T VIDEO When you select VIDEO Video mode2. RR 2 PARTS In addition Sony wiil supply at no charge new or rebuilt replacements in exchange for defective SC f g A g ie E parts for a period of one 1 year After 90 days from the date of purchase labor for removal and installation is E available from Sony authorized service facilities or a Sony Service Center at your expense ORE AOR o S H A Kan E des To obtain warranty service you must take the Product or deliver the Product freight prepaid in either its original Gr packaging or packaging affording an equal degree of protection to anv authorized Sony service facility d z This warranty does not cover customer instruction installation set up adjustments or signal reception prob SZ ems This warranty does not cover cosmetic damage or damage due to acts of God accident misuse abuse negli gence commercial use or modification of or to any part of the Product including the antenna This warranty does not cover damage due to improper operation or maintenance connection to improper voitage supply or attempted repair by anyone other than a facility authorized by Sony to service the Product This warranty does not cover Products sold AS IS or WITH ALL FAULTS or consumables such as fuses or batteries This warranty is valid only in the United States roaf of purchase in the form ui a bill of sale or receipted invoice wnich is evidence that the unit is within the Warranty period must be presented to obtain warranty se
3. R page 14 Change the aisplay mode For details refer to the instruction manual of your PC You are not wearing the Glasstron correctly The inside window where the picture is displayed is dirty A warning was displayed for more than two minutes The Glasstron turned off automatically You continued using the Glasstron for six hours The Glasstron turns otf automatically after six hours to prevent eye fatigue The battery pack or batteries are dead You put off the Glasstron while the The picture has no sound The sound is noisy The volume does not become louder Put on the Glasstron correctly pages 21 and 22 Adjust the brightness with the BRIGHT control page 32 Adjust the RGB signal synchronization page 39 Clean the display unit with a soft dry cloth Charge the battery pack or replace with new batteries page 41 Put the Glasstron on again to bring POWER SAVE is set to ON the forehead near to the POWER SAVING SENSOR page 14 Adjust the volume with the VOL control page 32 The AVLS function is on Set AVLS in the menu to OFF page 38 The equipments are not connected propely Connect the equipments correctly pages 15 to 20 Sound volume of the connected computer is inappropriate The battery pack discharges quickly Adjust the volume on the computer The battery pack is not charged enough The battery pack is completely dea
4. VIDEO When you connect to the S video connector S VIDEO appears on the screen Input the signal from the connected equipment When you connect the PC Adjust the screen resolution For details see Signal compatibility on page 35 When you display VGA pictures 640 x 480 the picture appears about 60 of the entire screen Notes If no picture appears check the default setting of your PC to output the external RGB signal from the monitor connector Some PCs do not output external display signal when they turn on or switch to external display mode Change the display mode of your PC referring to the instruction manual supplied with your PC When you connect the video equipment Start playback on the video equipment connected to the Glasstron When you display NTSC video picture the picture appears about 60 of the entire screen continued 31us BRIGHT fi Till Cul BRIGHTNESS IIIe nn darker brighter Adjust the sound volume by turning the VOL control When you set AVLS in the menu to on you cannot turn up the volume beyond the defir limit see page 38 If the audio input level is too high the sound may be distorted Turn the volume down using the VOL control lower louder After you finish using the Checking the display Glasstron indication Take off the Glasstron and turn off the Press the jog dial while the picture is power displayed The disp
5. glasses Solid and lightweight components made of magnesium alloy with the display unit weighing about 5 3 oz 120 g Checking the supplied accessories Check that the following accessories are supplied with your Glasstron If any item is not supplied contact your Sony dealer or local authorized Sony service facility Display unit power supply box 1 e Audio video cable special miniplug special miniplug 1 Audio video cable special minipl shane Busy epee puas e Windows 95 Windows 98 PC Glasstron Information Disk 1 e Screen adjustment disk for Macintosh 1 e Operating instructions 1 e Warranty 1 13 Locating the parts and controls Refer to the pages indicated in parentheses for details Display unit Strap release button 21 POWER ING SENSOR inner siae 36 38 22 Stereo earphone 22 Power supply box ay PUSH DISPLAY jog dial 23 37 MENU button 37 SCREEN switch 34 RGB connector 15 to 17 48 SEE THROUGH control 34 PC AUDIO jack 15 to 17 i RESET button on the bottom 29 CHARGE lamp 41 POWER POWER SAVING lamp 23 38 POWER switch 23 30 LD BATT RELEASE button 41 15 to 19 31 S VIDEO connector 19 BRIGHT control 32 DC IN connector E 20 41 Ventilation openings 46 VOL control 32 AUDIO VIDEO connector 18 19 1405 Connecting the Glasstron When connecting
6. Getting Started Checking the supplied accessories Locating the parts and controls Connecting the Glasstron Connecting the PC Connecting the video equipment Connecting the power source Wearing the Glasstron Checking the display unit position Checking the screen position alignment Setting the password un Operations Using the Glass inns sehen dad le iii Checking the display indication Screen warnings against overuse of the Glasstron Viewing the surrounding environment Adjusting the sound and picture Signal compatibility Adjusting the sound picture Adjusting the RGB signal 5 SAA A So pog t sen PEL re ZC Additional Information Index LL ELLE LE EEE EE EE CEE EEE Weide RL LLE LEE EEE TTT Weih AALE A E E TOTE E E E LL LL LEE EL EEE EEE ECC RS MAILLIET a eta TTT OPO ewe meet LL LEE EEE EEE ER oovoccacccoeocosccccocacocssoocossososssoosoacssocoosassocsosoa a AAT Wed AAL PE CEE RENTREE ER nena EE EE ENNEN NEEN REN NN ARA N EE E See Se Kee kd e E NENNEN EN daddeoededcsessa A O PNR TR ne ee ad Edel Shin 30 SAFETY INSTRUCTIONS gus THE SONY GLASSTRON PERSONAL VIEWER SHOULD BE USED IN STRICT ACCORDANCE WITH ALL INSTRUCTIONS TO PREVENT EYE OR OTHER INJURY LOSS OF VISUAL FUNCTIONS PROPERTY DAMAGE OR DEATH USE RESTRICTIONS LI dt e pe aa Warning No Use by Children Age 15 or Younger This product is designed for adult use The eyes of children are still developing and
7. ONY 3 862 917 11 1 ain Giasstron Operating Instructions US Mode d emploi ER WARNING YOUR FAILURE TO FOLLOW THESE OPERATING INSTRUCTIONS MAY RESULT IN EYE FATIGUE EYE DAMAGE OR OTHER INJURY CAREFULLY READ THIS INSTRUCTION MANUAL AND BECOME FAMILIAR WITH ALL SAFETY INSTRUCTIONS FOR THIS PRODUCT THIS PRODUCT SHOULD NOT BE USED BY CHILDREN AGE 15 OR YOUNGER IF YOU HAVE BEEN DIAGNOSED WITH EYE DISEASE OR EYE INJURY CONSULT YOUR DOCTOR BEFORE USE AND DO NOT USE WITHOUT YOUR DOCTOR S APPROVAL AVERTISSEMENT LE NON RESPECT DES PRESENTES INSTRUCTIONS D UTILISATION IMPLIQUE DES RISQUES DE FATIGUE DE BLESSURE OU AUTRES AUX YEUX LISEZ ATTENTIVEMENT LE PRESENT MODE D EMPLOI ET FAMILIARISEZ VOUS AVEC TOUTES LES INSTRUCTIONS DE SECURITE AFFERENTES CET APPAREIL NE PEUT ETRE UTILISE PAR DES ENFANTS AGES DE 15 ANS OU MOINS SI VOUS SOUFFREZ DE MALADIES OU D AFFECTIONS OCULAIRES CONSULTEZ VOTRE MEDECIN AVANT D UTILISER CET APPAREIL ET NE L UTILISEZ PAS SANS L AUTORISATION DE VOTRE MEDECIN Personal LCD Monitor PC blasstron PLM S700 1998 by Sony Corporation ein d he Pete FR RE WARNING To prevent fire or shock hazard do not expose the unit to rain or moisture CAUTION TQ REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol is intended to alert the user to the presence of uninsu
8. the Glasstron turns off automatically in both cases After about 6 hours of use WARNING YOU HAVE WATCHED FOR OVER 6 HOURS TO PREVENT EYE FATIGUE OR EYE DAMAGE GLASSTRON WILL AUTOMATICALLY SHUT DOWN SOON The power turns off automatically Caution Motion sickness from viewing programmes Some viewers may experience motion sickness headache or nausea from viewing movies or video programmes especially those with intense action and movement If you feel any of these symptoms stop using the product immediately To avoid personal injury or injury to others do not drive a car or motorcycle nor do anything that requires concentration until the symptoms disappear Caution Motion sickness from external motion Do not use the product while subject to external motion for example as a passenger in a car Use of this product under these conditions may cause motion sickness Viewing the surrounding environment While you are wearing the Glasstron you can view the surrounding eny nment through the screen in two ways Viewing the surrounding environment by adjusting the transparency of the entire screen See through mode You can adjust the level of transparency of the entire screen with the LCD shutter dial The picture becomes The area surrounding transparent the picture also becomes 4 transparent Turn the SEE THROUGH dial Van SEE THROUGH CLOSE OPEN Note
9. 4 in Using the Glasstron page 31 MA PUSH DISPLAY Changing the password When the power is on press RESET on the bottom df the power supply box with a pointed object such as a ballpoint pen If you have already read the WARNING messages page 23 through 27 e g while watching a video picture the display will return to step 1 in Setting the password page 28 e Before you read the WARNING message e g you have forgotten your password the disp y will return to step 3 in Turning on the Glasstron page 23 If you need to set a password after having set the Glasstron to operate without a password follow the same procedure above RESET Note Pressing the RESET button does not affect picture or sound adjustments in PC and video mode IS YOUR PASSWORD CORRECT 1234 YES ASEL 4EXEC 3 pus Using the Glasstron You need to set a password the first time you use the Glasstron or after you reset the Glasstron Set the password following the procedure in Setting the password pages 28 ana Before you start Be sure to follow the procedures in Connecting the Glasstron pages 15 to 20 an Wearing the Glasstron page 21 Turn on the Glasstron using the POWER switch then press PUSH DISPLAY jog dial Change the display language before Screen DISPLAY LANGUAGE REES FRANCAIS POWER POWER SAVING EE ON h
10. If there is a bright light near the display unit you may not be able to completely black out the surrounding environment by adjusting the SEE THROUGH dial 34us Viewing the rrounding environment 1 the area around the cture only Screen mo 23 You can adjust level of transparency of the screen area round the picture only The picture remains intact The picture remains The area surrounding intact the picture also becomes transparent Set the SCREEN switch to In this mode the screen does not become transparent even if you turn the SEE THROUGH dial Notes e When you set the SCREEN switch to ON the edges of the picture may fade a bit but this is not a malfunction If there is a bright light near the display unit you may not be able to completely black out the surrounding environment arround the picture by adjusting the SEE THROUGH dial when you set the SCREEN switch to on Adjusting the sound and picture Signal compatibility The signal specifications that this unit supports are as follows PC mode RGB signal Display mode Screen resolution Horizontal Vertical dot x line frequency kHz frequency Hz Macintosh 13 color 640 x 480 35 0 67 16 color 832 x 624 49 7 75 IBM PC compatibles VGA text 640 x 400 31 5 70 VGA graphics 640 x 480 31 5 60 VESA VGA 640 x 480 37 9 72 640 x 480 37 5 75 640 x 480 43 3 85 VESA SVGA 800 x 600 35 2 56 800 x 600 37 9 60 800 x 600 48 1 72
11. can result in fire or electric shock Do not use attachments not recommended by the manufacturer as they may cause hazards Avoid using earphones at high volume Hearing experts advise against continuous loud and extended play If you experience a ringing in your ears reduce volume or discontinue use Do not touch the AC power adapter or power supply box with wet hands If you fail to observe this it may cause electric shock Do not drop or give a mechanical shock to the product installation To prevent internal heat build up do no block the ventilation openings e Avoid operating the product at temperatures below 41 F 5 C e Do not subject the product to high temperature or direct sunlight If you d not observe the above instructions the product may become deformed and the screens may become impossible to align If you keep watching misaligned screens you may develop eye fatigue Follow th instructions in Checking the screen position alignment on page 25 to be sure the screens are aligned If you find the screens misaligned have the produc repaired at your Sony dealer or local authorized Sony service facility Do not place the product in locations where it is wet humid dusty smoky or steamy Do not use this product near or around water It may cause fire or electric shock Especially do not use the product in the bathroom e If the product is transported directly Do a cold to a warm
12. location or if the room temperature has changed suddenly the picture may be blurred or show poor color This is because moisture has condensed on the mirror or lenses inside If this happens let the moisture evaporate before using the product e Do not place the product on an unstable cart stand table or shelf The product may fall causing serious injury to a chilc or an adult and serious damage to the product Do not allow anything to rest on or roll over the power cord and do not place th product where the power cord is subject to wear or abuse continue Precautions continued Others Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions When the power cord or plug is damaged or frayed If liquid has been spilled into the product If the product has been exposed to rain or water If the product has been subject to excessive shock by being dropped or the cabinet has been damaged If the product does not operate normally when following the operating instructions Adjust only those controls that are specified in the operating instructions Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation When the product exhibits a distinct change in performance this indicates a need for service Do not dis
13. power cord to the AC power adapter and to a wall outlet Charge the battery pack on a flat place without vibration The CHARGE lamp lights up When the to wall outlet CHARGE lamp battery pack is fully charged the CHARGE lamp goes out AC d power Battery life and charging time are shown adapter in the table on the next page to DC IN Notes e If the POWER POWER SAVING lamp flashes while using the battery pack charge the battery pack e if the CHARGE lamp flashes the power supply box or battery pack is malfunctioning Contact your Sony dealer or local authorized Sony service facility e Use the supplied AC power adapter only when charging a battery pack e Battery life may be shorter in a cold environment This is a typical battery characteristic You cannot charge the battery pack in power save mode Turn off the Glasstron then it starts charging the battery pack continued ait Using the optional battery pack continued Battery pack Charging time Battery life fully charged battery PC ode NP F550 Approx 4 hours Approx 1 hour NP F750 Approx 8 hours Approx 2 hours NP F950 Approx 12 hours Approx 3 hours e The battery life and charging time may change depending on the conditions se e You can also use a battery pack such as the NP 500 510 710 F530 F730 F9 3 not supplied with the Glasstron e You can use an InfoLITHIUM battery pack with the Glasstron When using such
14. should match the monitor VGA type connector port of your Powerbook model HD15 female Power supply box Set the PC VIDEO switch to PC to audio port to PC AUDIO to RGB connector connector Audio cable supplied os RGB signal cable supplied N Signal flow Note on connection Set the display setting to the 16 inch display mode 832 x 624 or the 13 inch display mode 640 x 480 The Glasstron does not display the image with the 19 inch display mode 1024 x 768 or more 164s TER EEE Connecting a Macintosh desktop models Depending on the model you may need to use the supplied Macintosh adapter to connect the RGB signal cabl supplied as shown below When you connect the Glasstron to your Macintosh set the PC VIDEO switch on the power supply box to PC to monitor port of Macintosh lt mm to RGB signal cable o00000no0 o o o o o o o o D Sub 15 pin to monitor VGA type connector male port HD15 female Power supply box Set the PC VIDEO switch to PC Lo monttor port Macintosh KZ adapter 4 to audio port to PC AUDIO to RGB connector connector Audio cable supplied RGB signal cable supplied ES Signal flow Notes on connection The supplied display adapter does not support the models before the Macintosh II series Set the display setting to the 16 inch display mode 832 x 624 or the 13 inch display mo
15. the Glasstron to other equipment use the supplied cables Note If you use the commercially available cables and the performance is reduced check the performance using the supplied cables Connecting the PC Be sure to turn off your PC before connecting the power supply box Notes Do not use the RGB signal cable HD15 which is 6 5 feet 2m or longer The performance may be reduced e Refer to the instruction manual supplied with your PC as well Depending on your computer the audio port is indicated as LINE OUT headphone speaker etc e Adjust sound volume on the computer Connecting other BM compatible PCs Connect the Glasstron to your PC using the supplied RGB signal HD15 cable When you connect the Glasstron to your PC set the PC VIDEO switch on the power supply box to PC Power supply box Set the PC VIDEO switch lt lt to PC to monitor port to audio port to PC AUDIO to RGB connector connector Audio cable supplied RGB signal cable supplied a Signal flow continued 15 Connecting the Glasstron continued Connecting a Macintosh Powerbook Depending on the model you may need to use a commercially available adapt gt connect the RGB signal cable supplied as shown below When you connect the Glasstron our Powerbook set th PC VIDEO switch on the power supply box to PC to monitor to RGB port of e i bl Powerbook i Seele Connector
16. to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Declaration of Conformity Trade Name SONY Model No PLM S700 Responsible Party Sony Electronics Inc Address 1 Sony Drive Park Ridge NJ07656 USA Telephone No 201 930 6970 This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Precautions One blade of the plug is wider than the other for safety purposes and will fit into the power outlet Si one way If you are unable to insert the plug fully into the outlet contact your dealer You can use your Glasstron in any country or area with the supplied AC power adapter within 100 V to 240 V AC 50 6
17. 0 Hz Use a commercially available AC plug adapter a if necessary depending on the design of the wall outlet b sens 08 a b DISPOSAL OF LITHIUM ION BATTERY LITHIUM ION BATTERY DISPOSE OF PROPERLY You can return your unwanted lithium ion batteries to your nearest Sony Service Center or Factory Service Center Note In some areas the disposa of lithium ion batteries in household or business trash may be prohibited For the Sony Service Center nearest you call 1 800 222 SONY United States only For the Sony Factory Service Center nearest you call 416 499 SONY Canada only Caution Do not handle damaged or leaking iithium ion batteries United States and other countries countries manual IBM PC AT and VGA are registered trademarks e Microsoft MS MS DOS and Windows are registered trademarks of Microsoft Corporation in the Owner s record The model and serial numbers are located at the rear of the power supply box Record these numbers in the spaces provided below Refer to them whenever you call upon your Sony dealer regarding this product Model No Serial No of IBM Corporation of the U S A e Macintosh is a trademark licensed to Apple Computer Inc registered in the U S A and other e VESA is a trademark of Video Electronics Standard Association All other product names mentioned herein ma y be the trademarks or registered trademarks of their respective companie
18. 800 x 600 46 9 75 800 x 600 53 7 85 A A II Video mode video signal NTSC color system Displayed in 640 x 480 area A A A E E a Notes on the PC mode This unit does not support XGA mode 1 024 x 768 and above If you set the vertical frequency to 60 Hz in XGA mode the picture is displayed but the picture quality is poor due to the signal loss Change the screen resolution on your PC to SVGA or VGA Though the Glasstron supports the signals listed above set the vertical frequency to 60 Hz when using with SVGA 800 x 600 or to 72 Hz or 75 Hz with VGA 640 x 480 mode Also adjust the vertical frequency of the external display output signal of the connected computer e When you display VGA pictures 640 x 480 or NTSC video pictures video mode the pictures are not displayed across the entire screen About 60 area of the screen is utilized when VGA pictures appear or about 60 area is utilized when NTSC video pictures appear e Some noteboux type PCs do not output the RGB signal in the adjusted screen resolution and the vertical frequency from the external monitor port until you set the PC to external display mode When you use Microsoft Windows 95 or Windows 98 install the information file included in the supplied Windows 95 Windows 98 PC Glasstron Information Disk For details on how to install the information file refer to the Installation Guide Windows 95 Windows 98 PC Glasstron Information Disk screen adjustment d
19. C IN connector on the power supply box Then connect the AC power cord supplied to the AC power adapter and to a wall outlet Do not connect the power source until all other connections are complete to wall outlet AC power adapter ge AC power cord supplied AC PLM3 supplied Power supply box 205 Wearing the Glasstron WARNING Failure to properly fit the product see Proper Fit page 9 each time may result in eye fatigue eye damage or loss of visual functions and may result in accident or injury This product should not be used by children age 15 or younger The eyes of children are still developing and may be adversely affected by use of this product and it may cause eye fatigue eye damage or loss of visual functions In addition this product may not be adjusted to fit a child s head If you normally wear glasses while watching TV you can use the Glasstron while wearing glasses Loosen the back strap Press and hold the strap release buttons Then loosen the back strap in the direction of the arrows ee aae ara pt e EN Put on the Glasstron Hold the front pad against your forehead and place the rear strap so it is fixed firmly around the back of your head Adjust the strap Adjust the strap after putting on the Glasstron Make sure the strap is snug but comfortable continued 214 Adjust the angle of the display unit While holding
20. D 8 B Blue GND 9 10 GND 11 GND 12 13 SYNC Horizo 1 14 SYNC Vertic 15 S PC AUDIO input reo minijack VIDEO mode AUDIO VIDEO input Special minijack Video 1 Vp p 75 ohms unbalanced sync negative S VIDEO input 4 pin mini DIN Y 1 Vp p 75 ohms unbalanced sync negative C 0 286 Vp p 75 ohms unbalanced sync negative Screen resolution Horizontal 832 dots max Vertical 624 lines max Supplied accessories AC power adapter AC PLM3 1 AC power cord 1 RGB signal cable 1 Audio video cable special miniplug phono plug 1 S video cable 1 Audio video cable special miniplug special miniplug 1 Audio cable stereo miniplug 1 Adapter for Macintosh 1 Carrying cases 2 Sunshades 1 pair Operating Instructions 1 Windows 95 Windows 98 PC Glasstron Information Disk 1 Screen adjustment disk for Macintosh 1 Warranty 1 Design and specifications are subject to change without notice index A AC power adapter 20 Accessories supplied 13 48 Adjusting brightness 32 color 40 se hue 40 volume 32 AVLS 36 38 B Back strap 22 Battery pack 41 C D E F G Carrying case 44 Charging a battery pack 41 Checking display unit position 23 screen position 25 Color 40 Connection battery pack 41 PCs 15 power 20 video equipment 18 Contrast 40 H Health concerns 7 Horizontal position 39 Hue 40 I J K L Ins
21. The combined picture This is not a malfunction you see with both eyes If the image you see matches one of the pictures below you have correct screen alignment Correct Correct Correct Correct If the image you see matches one of the pictures below stop using the Glasstron immediately Use of the Glasstron under such conditions may cause eye fatigue or eye damage Incorrect Incorrect Incorrect When no vertical lines When the horizontal When the center vertical cross the horizontal line appears as a line does not cross the line diagonal line horizontal line If you cannot see a proper arrangement of these lines even after resting your eyes fora few hours the Glasstron may not be operating correctly Contact your Sony dealer or local authorized Sony service facility PUSH DISPLAY The password YES or NO screen appears WARNING MISUSE OR OVERUSE OF THE PRODUCT MAY RESULT IN EYE FATIGUE OR EYE DAMAGE STOP USING IF YOU FEEL TIRED OR EXPERIENCE HEADACHES OR DISCOMFORT SEE THE USER S MANUAL FOR DETAILS d CHECK DO YOU WISH TO SETA THREE NUMBER PASSWORD NO SEE THE USER S MANUAL FOR DETAILS O SEL d EXEC Y Go to Setting the password on page 28 Setting the password WARNING This product should not be used by children age 15 or younger The eyes of children are still developing and may be adversely affected by use of this produ
22. a battery pack the estimated remaining battery life is displayed not with the time counter but with the indicator The battery life listed above is for PC mode When you use the Glasstron in video mode the battery life is reduced to 80 of the PC mode InfoLITHIUM is a trademark of Sony Corporation Checking the remaining battery life When no indication or caution appears on the screen press the MR PUSH DISPLAY Remaining battery life Fully charged ag dead m a a When the battery pack is weak the following message appears on the screen Replace the battery pack with a charged one THE BATTERY PACK iS EMPTY REPLACE WITHA CHARGED BATTERY pi ia When using the AC power adapter the ME mark appears on the screen 420s Precautions Use Operate the product only with the supplied AC power adapter If you use a different AC power adapter it may cause a malfunction s gt Unified polarity piug Should any liquid or solid object fall into the cabinet unplug the product and have it checked by qualified personnel before operating it further Always turn the product off when you do not use it Unplug the product from the wall outlet if you are not going to use it for several days or more To disconnect the cord pull it out by the plug Never pull the cord itself Do not overload wall outlet extension cords or convenience receptacles beyond their capacity since this
23. ar to indicate the status of the Glasstron or input signal OUT OF SCAN RANGE The input signal does not match the supported specification Change the screen resolution on your PC For details of the signal compatibility see Signal compatibility page 35 NO INPUT SIGNAL The signal is not input e Make sure that the PC VIDEO switch is correctly set Make sure that the connected equipment is turned on Make sure that the your PC is not in the power saving mode HIGH TEMPERATURE The Glasstron temperature is high Turn off the Glasstron for a while then turn on again Note If you cover the ventilation hole of the power supply box an error may occur due to a rise in temperature In addition it may cause a fire or malfunction of the unit Troubleshooting If you have any questions or problems not listed below contact your Sony de authorized Sony service facility ori cal gt Symptom Cause The picture does not appear Connections are incorrect Remedy Connect the eq ent crrectly pages 15 to 20 The signal is not input Select the cor nput page 31 The Glasstron enters power save mode When you connect to a notebook type PC the display mode is set to local display mode LCD panel of your notebook PC The picture is dark or dim The picture suddenly disappears Put the Glas ton again to bring the forehea ar to the POWER SAVING SL
24. assemble or remodel the product It may cause fire or electric shock Have the product checked and repaired at your Sony dealer or local authorized Sony service facility Do not attempt to service the product yourself since opening the cabinet may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel When replacement parts are required be sure the service technician certifies in writing that he has used replacement parts specified by the manufacturer that have the same characteristics as the original parts Unauthorized substitutions may result in fire electric shock or other hazards Upon completion ot ervice or repairs to the produc the service _ iuucian to verform tine safety checks as spe sified F to determine tnat th operating conditior Unplug the produ before cleaning dry soft cloth o moistened witt Do not use an alcohol or be xe manufacturer oduct is in safe 1 to so certify om the wall outlet the product with a t cloth slightly d detergent solution of solvent such as Note once ig Use the supplied carrying cases whenever you carry the Glasstron Put the display unit into the small case tor protection Put the display unit together with the power supply box and other accessories into the large case Power supply box AC power adapter Display unit Small case Error messages The following error messages may appe
25. cause Caution Avoid Wet Humid Dusty and Smoky Environments This product may be adversely affected by wet humid dusty and smoky conditions which may result in property damage personal injury or death Do not use this product near or around water Avoid using or storing this product under these conditions Caution Avoid High Temperature or Direct Sunlight Avoid Mechanical Shock This product may be deformed by high temperature or direct sunlight and also by dropping the product or other mechanical shock Avoid these conditions as the screens may loose proper alignment and it may cause eye fatigue or eye damage Caution Unplug the Product When Not in Use Always unplug this product when it will not be in use for extended periods of time or during vacations 10 About the Glasstron Caution The screen is always right in front of you The Glasstron is a head mounted display With this type of display the screen is always in front of you even if you move your head Because of this feature you can concentrate on the screen more easily compared with ordinary TVs and you have a sense of being in the action wearing glasses It is easy to adjust the Glasstron to your eyes You can use the display unit even while Every time you use the Glasstron the adjustment screen appears to help you adjust the display unit properly You can also check whether the left and right screen positions are properly aligned or no
26. ct To prevent such use this product has been equipped with a safety password protection system Please use a secure password if children age 15 or younger may have access to this product Once you set a password you have to input the password every time you use the Glasstron L not forget your password If you like you can set the Glasstron to operate without a passworc Before you start Follow the procedure in Turning on the Glasstron pages 23 through 27 The password YF or NO screen appears on the screen Select whether to set a password or not using the PUSH DISPLAY jog dial Screen If you need to set a password select YES If not select NO by turning the jog TAREE NUMBER PASSWORD dial Then press the jog dial If you do not need to set a password go to step 4 NO in Using the Glasstron page 30 SEE THE USER S MANUAL FOR DETAILS ISEL EXEC ENTER THE FIRST NUMBER soos PUSH DISPLAY SEL d EXEC Enter a three digit password number one by one by using the j dial Turn the jog dial to enter the first ENTER THE THIRD NUMBER number then press the jog dial Enter the second and third numbers in the same way Entered password PUSH DISPLAY 2845 Verify a password using the jog dial If the password is correct select YES by turning the jog dial If not select NO Then press the jog dial If you select NO return to step 1 If you select YES go to step
27. d Charge the battery pack fully or use a new one page 41 46us Symptom Cause Remedy The battery pack is not charged gt The battery pack is not installed properly Install the battery pack properly page 41 The battery pack is completely dead The supplied AC power adapter is not used Replace the battery pack with a new one page 41 Use the supplied AC PLM3 AC power adapter The black red and green The LCD is made with high dots do not disappear The picture color is different The picture gets out of position in the PC mode Noises appear on the picture in the PC mode The POWER switch does not function precision technology However black points or bright points of light red blue or green may appear constantly on the LCD screen This is not malfunction Effective dots more than 99 999 The color intensity and hue are not adjusted Adjust the color intensity and hue in the menu screen page 40 The external display output signal of the connected computer does not match the supported input signal The input signal does not match to the supported specification See Signal compatibility page 35 In this case the picture does not appear correctly The horizontal frequency of the signal does not match to the supported specification In this case the flicker may appear on the right edge of the picture Change the screen resol
28. de 640 x 480 The Glasstron does not display the image with the 19 inch display mode 1024 x 768 or more continued Connecting the Glasstron continued Connecting the video equipment Connect a VCR laser disc player DVD player or camcorder to the power sup box using one of the audio video cables supplied as shown below When you connect the sstron to the video equipment set the PC VIDEO switch on the power supply box to VIT gt Note Do not use the audio audio video or S video connecting cables which are 9 8 fe 3m or longer The performance may be reduced VCR laser disc player DVD player camcorder etc to audio video outputs Set the PC VIDEO switch to VIDEO Video yellow Audio L white Audio video cable supplied special miniplug phono plug Camcorder etc AUDIO VIDEO to audio video output epp T Audio video cable supplied special miniplug special miniplug gt Signal flow to AUDIO VIDEO connector 184s If your video equipment has an S video jack Connect the Glasstron to the video equipment using the supplied S video cable and the audio video cable to enjoy the highest quality pictures In this case you do not need to connect the video yellow plug If you connect both the S video and video plugs the S video signal is automatically selected When you connect the Glasstron to the video equipment set the PC VIDEO switch on
29. e Microsoft MS MS DOS and Windows are registered trademarks of Microsoft Corporation in the United States and other countries e Macintosh is a trademark licensed to Apple Computer Inc registered in the U S A and other countries All other product names mentioned herein may be the trademarks or registered trademarks of their respective companies Furthermore and are not mentioned in each case in this manual Displaying the adjustment screen Before starting the screen adjustment be sure to connect the Glasstron to your computer and check the display unit position and the screen position adjustment For details refer to the Operating Instructions of the Glasstron After checking display the adjustment screen following the procedures below For Windows 95 or Windows 98 1 Start Windows 95 or Windows 98 2 Insert the Windows 95 Windows 98 PC Glasstron Information Disk into the floppy disk drive 3 Double click the My Computer icon 4 Double click the 3 2 Floppy icon 5 Double click the PC Glasstron ADJ Tool icon For Macintosh 1 Start Macintosh 2 Insert the Screen adjustment disk for Macintosh into the floppy disk drive 3 Double click the icon in the Floppy Disk window Notes e When you use Windows 95 or Windows 98 install the information file included in the supplied Windows 95 Windows 98 PC Glasstron Information Disk and select the correct screen resolution Wh
30. ed horizontal noise appears on the vertical thin lines Adjust to minimize the horizontal noise e If the tracking is not correct horizontal noise appears on the vertical thin lines Adjust the tracking again Finishing the screen adjustment 1 Press the MENU button on the power supply box so that the adjustment screen disappears 2 Click the screen when the pointer appears 3 Eject the floppy disk
31. en you use a notebook PC you may not be able to perform the screen adjustment correctly In this case change the display mode on your notebook PC to the external monitor only Adjusting the screen After the adjustment screen appears press the MENU button on the power supply box Perform the fine adjustment following the procedure below V CENT 1 Turn the jog dial to select V CENT and press the jog dial 2 Adjust the line positions by turning the jog dial to display both the upper and bottom lines refer to illustration Bq and press the jog dial H CENT 1 Turn the jog dial to select H CENT and press the jog dial 2 Adjust the line positions by turning the jog dial to display both the left and right lines refer to illustration D I and press the jog dial Note If the adjustment is not successful adjust TRACKING first then try again i TRACKING 1 Turn the jog dial to select TRACKING and press the jog dial 2 Adjust the screen by turning the jog dial until vertical stripes do not appear in area of the screen refer to illustration D I and press the jog dial Note If the tracking is not correct dim vertical stripes appear Adjust the tracking again SYNC 1 Turn the jog dial to select SYNC and press the jog dial 2 Adjust the screen by turning the jog dial to clear the vertical thin lines refer to illustration B and press the jog dial Notes If the frequencies are not synchroniz
32. event eye fatigue or eye damage For instructions on these functions see page 33 2222222000 NN et Caution Motion Sickness from Viewing Programmes Some viewers may experience motion sickness headache or nausea from viewing movies or video programmes especially those with intense action and movement If you feel any of these symptoms stop using the product immediately To avoid personal injury or injury to others do not drive a car or motorcycle nor do anything that requires concentration until the symptoms disappear Tus SAFETY INSTRUCTIONS continued Health Concerns GE gt Caution Motion Sickness from External Mot i Do not use this product while subject to external motion rexample as a passenger in a car Use of this product under these cond s may cause motior sickness Caution Accidents Do not use this product while walking skating bicycling operating a motor vehicle or other power equipment or while engaged in any other similar activity Use of this product under these conditions may result in an accident injury or death to yourself or others Caution Sound Volume Avoid using headphones at high volume Hearing experts advise against continuous loud and extended play If you experience a ringing in your ears reduce volume or discontinue use gus Instructions for Safe Fit mire sets bm Warning Proper Fit Each time this product is used adjustment screen
33. function The power saving function may not work correctly in the following cases your hair is between your forehead and the POWER SAVING SENSOR the space or angle between your forehead and the POWER SAVING SENSOR is not correct In these cases set POWER SAVE to OFF e When the picture disappears immediately do the following procedures 1 Turn off the power sliding the POWER switch 2 Turn on the power again 3 After checking the screen position pages 23 to 27 press MENU to display the menu options 4 Set POWER SAVE to OFF 364S Press MENU The menu display appears on the screen PC mode MENU gt EXIT MEGABASS 0 POWER SAVE OFF V CENT H CENT TRACKING SYNC PRESET Xd sel d exec MENU EXIT VIDEO mode MENU D EXT MEGA BASS 0 POWER SAVE OFF CONTRAST HIT Tiers HUE al Te COLOR JIFAUOOMARICoocococtorascooo RESET CQ SEL Q exec MENU EXIT mena Turn the PUSH DISPLAY jog dial to select the desired item then press the jog dial The setting screen of the selected item appears eee PUSH DISPLAY Adjust the setting using the jog dial For details on each item see pages 38 to 40 To set other items repeat steps 2 and 3 Press MENU The menu display goes off You can also turn off the menu display by selecting EXIT in the menu using the jog dial continued Adjusting the sound and picture continued AVLS Au
34. information file refer to the instruction manual Windows 95 Windows 98 PC Glasstron Information Disk screen adjustment disk for Macintosh Note When you display the picture on both the LCD display of the notebook PC and on the Glasstron you cannot adjust the picture on the Glasstron because of the mismatch of the output signal frequencies with some notebook PCs In this case change the display mode on your PC to the external monitor only Then change the screen resolution according to the list on Signal compatibility page 35 V CENT TRACKING Turn the jog dial to adjust Turn the jog dial until the the center of the picture stripes on the picture then press the jog dial disappear then press the jog dial V CENT C t idaos 4 exec me EC id aps d exec H CENT SYNC Turn the jog dial to aciust Turn the jog dial to adjust the center of the picture the clearance of the picture then press the jog dial then press the jog dial continue Adjusting the sound and picture continued Adjusting the video signal Resetting the CONTRAST adjustment tot e P facto reset l vel Turn the jog dial to adjust y P gt AVES MEGA BASS POW SAVE settings the contrast then press the are not reset to the factory eset level jog dial Turn the jog dial to select RESET in the rienu then press the jog dial PC mode POWER SAVE OFF V CENT H CENT TRACKING SYNC Ed sel d exec Mend Exi
35. isk for Macintosh continued peed AO 35 Adjusting the sound and picture continued Adjusting the sound picture You can adjust the following items using the menu display The menu is displayed only in English PC mode RGB signal Video mode video sign AVLS Auto Volume Limiter System Keeps the maximum volume down to protect vour ear You cannot tur p the volume beyond the defined limit even if you try to turn the VOL control MEGA BASS Creates a deep powerful sound by emphasizing the bass sound POWER SAVE The POWER SAVING SENSOR detects the removal of the Glasstron from your head The uni enters standby mode in a few seconds automatically stopping the sound and picture in order to save the battery power The sound and picture resume in a few seconds when you put on the Glasstron again V CENT CONTRAST Adjusts the vertical position of the Adjusts the picture contrast picture H CENT HUE Adjusts the horizontal position of Adjusts the hue if the picture looks the picture too red or green TRACKING COLOR Adjusts the tracking of the picture Adjusts the color intensity e g if the picture is not displayed clearly SYNC Adjusts the picture with the RGB signal synchronization e g if the picture is blurred or if red or blue shadows appear in the picture Perform this adjustment after TRACKING adjustment is finished Notes on power saving
36. lated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons This symbol is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING The AC power cord must be changed only at qualified service shop The nameplate is located on the bottom of the power supply box Use a commercially available AC plug adapter if necessary depending on the design of the wall outlet CAUTION To prevent electric shock match wide blade of plug to wide slot fully insert The shielded interface cable recommended in this manual must be used with this equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules ous CAUTION You are cautioned that changes or modifications not expre approved in this manual could voia ur authority to operate this equipmen INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference
37. lay indication appea on the screen for five seconds Note on the LCDs The LCD screen is made with high precision technology However black points or bright points of light red blue or green may appear constantly on the LCD screen This is not malfunction Effective dots more than 99 999 32 us To turn off the indication sooner press t jog dial again MEGA BASS 2 AVES Remaining battery li page 42 Input sigr page 31 MEGA BA page 38 AVLS page 38 When using the AC power adapter the ME mark appears on the screen ben E AA E sneer sn i oe Screen warnings against overuse of the Glasstron To prevent eye fatigue or eye damage after you use the Glasstron for a fixed length of time the following caution appears on the screen After about 2 hours and 15 minutes of use YOU HAVE WATCHED FOR OVER 2 HOURS STOP IF YOU FEEL TIRED 4 CONTINUE Stop using the Glasstron if you feel tired or you experience headaches or discomfort If you want to continue using the Glasstron press the jog dial After about 4 hours and 15 minutes of use i YOU HAVE WATCHED FOR OVER 4 HOURS STOP IF YOU FEEL TIRED 4 CONTINUE Stop using the Glasstron if you feel tired or you experience headaches or discomfort If you want to continue using the Glasstron press the jog dial Note If you do not press the jog dial when the cautions above appear on the screen
38. loppy disk drive Type the drive name of the inserted Windows 95 Windows 98 PC Glasstron Information Disk Default a in the Copy manufacture s files from box in the Install From Disk dialog box and click the OK button _ 10 Click the Next button and check the message then click the Next button again 11 Click the Finish button 12 Click the Apply button then click the OK button 13 Restart your computer to apply the new setting so O o S O NY 3 865 887 01 1 E Windows 95 Windows 98 PC Glasstron Information DiskiScreen adjustment disk for Macintosh BYIREXAAE Operating Instructions Mode d emploi Bedienungsanleitung Handleiding Bruksanvisning K ytt ohjeet Bruksanvisning Betjeningsvejledning Manual de instru es Manual de instrucciones Istruzioni per l uso O nyiec Xprnons Personal LCD Monitor PG Glasstron PLM S700 S700E Sony Corporation 1998 Printed in Japan The Windows 95 Windows 98 PC Glasstron Information Disk and Screen adjustment disk for Macintosh contain the PC Glasstron ADJ Tool for performing the correct screen adjustment The Windows 95 Windows 98 PC Glasstron Information Disk includes the information file on choosing the correct screen resolutions Refer to the Installation Guide for the installation procedure For Macintosh refer to the instruction manual supplied with your computer to set the correct screen resolution
39. may be adversely affected by use o this product and it may cause eye fatigue eye damage or loss of visual functions In addition this product may not be adjusted to fit a child s head Safety Password To prevent use by children age 15 or younger this product has been equipped with a safety password protection system For instructions on the use of the password protection systerr see page 28 Warning Eye Disease Eye Injury Glaucoma If you have been diagnosed with or are susceptible to eye disease eye injury or glaucoma consult your doctor before use and do not use without your doctor s approvai Use of this product by individuals with conditions such as glaucoma may cause these conditions to worsen Caution Heart Disease High Blood Pressure If you have a history of heart disease or high blood pressure consult your doctc before use and do not use without your doctor s approval Use of this product allows the viewer to feel they are in the action which may result in increased anxiety or heart injury If during viewing any increased anxiety is experienced stop using the product immediately and rest If the symptoms persist after rest consult your doctor Caution Seizures If you have a history of temporary spasms unconsciousness or epileptic seizures from light stimulation consult your doctor before use and do not use without your doctor s approval Use of this product by such individuals may cause spasms unconsciousnes
40. osition Every time you turn on the Glasstron the adjustment screen appears to help you adjust the display unit properly Adjust the display unit following the procedure below Turn on the Glasstron sliding the POWER switch The POWER POWER SAVING lamp lights up green Screen DISPLAY LANGUAGE POWER POWER SAVING pa seas ry h AMON be FRANCAIS ON OFF WEE Za tQSEL EXEC Turn the PUSH DISPLAY jog dial to select the desired language then press the jog dial CA DISPLAY LANGUAGE FRANCAIS lt dSEL 4 EXEC PUSH DISPLAY Read the WARNING and press the jog dial WARNING FOR YOUR SAFETY AND TO PREVENT EYE OR OTHER INJURY READ AND FOLLOW ALL INSTRUCTIONS IN THE USER S MANUAL PUSH DISPLAY Q CHECK continued Pn Turning on the Glasstron continued Read the next WARNING and press the jog dial WARNING THIS PRODUCT SHOLi NOT BE USED BY CHILDRE AGE 15 OR YOUNGER SEE THE USER S MANUAL FOR DETAILS PUSH DISPLAY d CHECK e Adjust the display unit so that you can see an asterisk in each of the four corners as shown below Correct WARNING TO CONFIRM SAFE FIT AND PREVENT EYE FATIGUE OR EYE DAMAGE ADJUST THE DISPLAY SO THAT AN ASTERISK APPEARS IN EACH CORNER SEE THE USER S MANUAL FOR DETAILS d CHECK incorrect Incorrect Incorrect incorrect After you complete the display unit adjustment p
41. ress the jog dial 24us we Read the next WARNING then go to Checking the screen position t alignment gt WARNING TO PREVENT EYE DAMAGE DO NOT USE THIS PRODUCT IF THE VERTICAL LINES DO NOT CROSS THE HORIZONTAL LINE ON THE NEXT SCREEN SEE THE USER S MANUAL FOR DETAILS d CHECK Checking the screen position alignment WARNING Each time this product is used adjustment screens will appear requiring the viewer to properly fit the product Proper fit means that an asterisk will appear in each corner of the display To prevent eye damage do not use this product if the vertical lines do not cross the horizontal line on the next screen The Glasstron includes two small left and right LCDs You are watching a combined picture created from these two screens Although the screen position is properly aligned at the factory it may become misaligned if the Glasstron is deformed or damaged Check the screen position alignment every time you turn on the Glasstron If you cannot have correct screen alignment stop using the Glasstron immediately Press the PUSH DISPLAY jog dial Screen PUSH DISPLAY continued ll IN 25t 264s If the screens are aligned press the jog dial Ka Left screen Right een You ysee a horizontal li ont left screen rather tha the ht screen and vertica lines on the right screen Correct rather than the left screen
42. rvice This warranty is invalid if the factory applied serial number has been altered or removed from the Product REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER SONY SHALL MOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIB TED BY APPLICABLE LAW ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICU LAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY Some states do not allow the exciusion or limitation of incidental or consequential damages or allow limitations on how iong an implied warranty lasts so the above limitations or exciusions may not apply to you in addition if you enter into a service contract with the Sony Partnership within 90 days of the date of sale the limitation on now long an implied warranty lasts does not apply to you This warranty gives you specific legal rights and you may have other rights which vary from state to state For your convenience Sony Electronics inc has established telephone numbers for frequently asked questions To locate the servicer or deaier nearest you or for service assistance or resolution of a service problem or for product information or operation call Sony Direct Response Center 1 800 222 7669 or write to Sony Direct Response Center 12451 Gateway Blvd Fort Myers FL 33913 For an acces
43. s Furthermore M and are not mentioned in each case in this KEN 4 us Congratulations on your purchase of a Sony Glasstron Personal Viewer The Glasstron using current technology in small lightweight visual displays provides a television viewing experience similar to watching a 30 inch television from a distance of approximately 4 feet in SVGA mode Viewing experience may differ according to individual perception The Glasstron Personal Viewer creates an image through two separate liquid crystal displays in close proximity to your eyes To insure your safe use of the Glasstron please become familiar with its basic operations including proper fitting instructions and be aware of any symptoms of eye fatigue or other discomfort you may experience WARNING YOUR FAILURE TO FOLLOW THESE OPERATING INSTRUCTIONS MAY RESULT IN EYE FATIGUE EYE IMPAIRMENT OR OTHER EYE INJURY PROPERTY DAMAGE OR DEATH WARNING THIS PRODUCT SHOULD NOT BE USED BY CHILDREN AGE 15 OR YOUNGER THE EYES OF CHILDREN ARE STILL DEVELOPING AND MAY BE ADVERSELY AFFECTED FROM USE OF THIS PRODUCT Note on the LCD Liquid Crystal Display The LCD screen is made with high precision technology However black points or bright points of light red blue or green may appear constantly on the LCD screen This is not malfunction Effective dots more than 99 999 SAFETY INSTRUCTIONS ru E E 6 About the Glasstron
44. s or seizures If you experience such symptoms during use stop using the product immediately and consult your doctor ADDITIONAL SAFETY INFORMATION A Health Concerns See pages 7 through 8 B Instructions for Safe Fit See page 9 C Warnings for Electronic Products See page 10 gt Warning Eye Fatigue Eye Damage Loss of Visual Functions Misuse or overuse of this product may result in eye fatigue eve damage or loss of visual functions Stop using if you feel tired or experience headaches or discomfort Warning No Use by Children Age 15 or Younger This product is designed for adult use The eyes of children are still developing and may be adversely affected by use of this product and it may cause eye fatigue eye damage or loss of visual functions In addition this product may not be adjusted to fit a child s head Caution Sickness Headache Nausea If during use you experience any of the following symptoms stop using this product immediately and rest These symptoms may indicate that you are misusing or overusing the product see Instructions for Safe Fit page 9 or that you should noi use the product for health reasons If the following symptoms persist after rest consult your doctor sore eyes eye fatigue or double vision headache inability to focus on the screen nausea or motion sickness stiff or sore shoulders or neck After six hours the product automatically turns off to pr
45. s will appear requiring the viewer to properly fit the product Proper fit means that an asterisk will appear in each corner of the display Failure to properly fit the product each time may result in eye fatigue eye damage or loss of visual functions and may result in accident or injury For instructions on how to properly fit this product see pages 23 through 27 em Warning No Use by Children Age 15 or Younger This product is designed for adult use The eyes of children are still developing and may be adversely affected by use of this product and it may cause eye fatigue eye damage or loss of visual functions In addition this product may not be adjusted to fit a child s head Safety Password To prevent use by children age 15 or younger this product has been equipped with a safety password protection system For instructions on the use of the password protection system see page 28 gu SAFETY INSTRUCTIONS continued Warnings for Electronic P aducis o Caution Electric Shock Failure to observe all operating and maintenance instructions y cause damage to your product and may result in property damage or injur death from electric shock fire or other cause Caution Do Not Disassemble Any required service on this product should be performed by a trained authorized servicer Failure to comply with this warning may result in property damage or personal injury or death from electric shock fire or other
46. sory or part not available from your authorized dealer call 800 488 SONY 7669 RA oe OE CII Eo Ning Sony Piine http www world sony com Printed on recycled paper Sony Corporation Printed in Japan Gr ete SG neen Vum ce EOE E ve me S O NY 3 865 654 01 1 Windows 95 Windows 98 PC Glasstron Information Disk 4 VA RILIA R Installation Guide Guide d installation _ Installationsanleitung Gu a de instalaci n Guida all installazione ersonal LCD Monitor PG plasstran PLM S700 S700E Sony Corporation 1998 Printed in Japan The Windows 95 Windows 98 PC Glasstron Information Disk includes the information file on choosing the correct screen resolutions When you use Microsoft Windows 95 or Windows 98 you must match the screen resolution of the Glasstron to the output signal of your computer for optimal Glasstron performance In order for the Glasstron to receive the output signal from the computer correctly and to set up the functions of the Glasstron install the files from the disk onto the hard disk of your computer using Windows 95 or Windows 98 e Microsoft MS MS DOS and Windows are registered trademarks of Microsoft Corporation in the United States and other countries All other product names mentioned herein may be the trademarks or registered trademarks of their respective companies Furthermore M and 0 are not mentioned in each case in this manual Ins
47. t less lt __ more COLOR Turn the jog dial to adjust the color intensity then press the jog dial VIDEO mode HI TS DE mme UL soe serene CQ SEL d exec MENU Exit COLOUR HUNN idaos q exec Note The settings are retained even when you turn off the power less more HUE Turn the jog dial to adjust the hue then press the jog dial fd abs exec reddish _______ greenish 405 Using the optional battery pack If you use a battery pack such as the NP F550 F750 F950 you can use the Glasstron without connecting to a wall outlet Note You cannot use the Glasstron with the alkaline batteries Use the AC power adapter supplied or the battery pack not supplied Charging the battery pack Charge the battery pack before use You can charge the battery pack using the power supply box If you attach the battery pack as described below the battery pack charges while you are not using the Glasstron Attach the battery pack to the power supply box Install the battery pack properly making sure it is not crooked against the power EN Battery pack supply box Power supply lt a To remove the battery pack while box sliding BATT RELEASE puil out the battery pack BATT RELEASE Ss button see ng ans et me vi e E EE seems mn Connect the AC power sr adapter to the DCIN connector on the power supply box Then connect the AC
48. t Cautions appear on the screen about every two hours to remind you to check for eye fatigue The power will automatically turn off if you do not press the PUSH DISPLAY jog dial If you keep using the Glasstron continuously for six hours a warning appears on the screen and the power will turn off automatically The Glasstron consists of the following items Personal Computer Laser disc player DVD player Display unit The display unit is equipped with two small left and right LCDs Power supply box You can supply power using the supplied AC power adapter or the optional Sony rechargeable battery pack When using with the Glasstron connect your video equipment or PC to the connector on the power supply box You can adjust the sound volume You can also use the SEE THROUGH control in order to see the surrounding environment continued 11 120s About the Glasstron continued Features A powerful big screen experience comparable to Watching a 30 inch screen from approximately 4 feet 1 2 m away SVGA mode e You can connect the Glasstron which is equipped with 1 55 million dot LCD to your PC to see the screen of the PC in the SVGA or VGA screen mode e You can enjoy high quality picture when you connect the DVD player or DV camcorder etc The see through function allows you to see the surrounding environment while wearing the Glasstron e You can use the Glasstron while wearing
49. talling the Windows 95 Windows 98 PC Glasstron Information Disk 1 Start Windows 95 or Windows 98 2 Click Start then point to Settings and click Control Panel 3 Double click the Display icon For Windows 95 4 Click the Setting tab then click the Change Display button 5 Click the Change button Or 4 Click the Settings tab then click the Advanced Properties button 5 Click the Monitor tab on the Advanced Display Properties dialog box then click the Change Monitor Type button Click the Have Disk button on the Select Device dialog box Insert the Windows 95 Windows 98 PC Glasstron Information Disk into the floppy disk drive 8 Type the drive name of the inserted Windows 95 Windows 98 PC Glasstron Information Disk Default a in the Copy manufacture s files from box in the Install From Disk dialog box and click the OK button 9 Select the display model you use in the Models box 10 Restart your computer to apply the new setting For Windows 98 4 Click the Settings tab hen click the Advanced Properties button 5 Click the Monitor tab then click the Change button 6 Click the Next button 7 Click the radio button beside Display a list of all the drives in a specific location so you can select the drive you want then click the Next button Click the Have Disk button Insert the Windows 95 Windows 98 PC Glasstron Information Disk into the f
50. the power supply box to VIDEO VCR Laser disc player DVD player camcorder etc Set the PC VIDEO switch to VIDEO Power supply box S video cable supplied to S VIDEO connector _ to S video output S VIDEO Y AUDIO VIDEO to AUDIO VIDEO connector to audio video output gt Audio video cable supplied special miniplug gt special miniplug aa Audio video cable supplied special miniplug phono plug DAS AX Signal flow to audio video outputs About the AUDIO VIDEO input jack The AUDIO VIDEO input jack of the Glasstron is a special minijack and the signal connections are aligned as shown on the right This alignment may differ depending on the equipment Audio R Audio L GND Video continued _ 1c Connecting the Glasstron continued Notes Even if you use the supplied audio video e When you connect the Glasstron to the audio cable the audio and video signals may not be output jacks phono iacks of our video carried to the Glasstron depending on the equipment connect the Glass ron to both the video source In this case contact your Sony right and left audio output i s If you dealer or local authorized Sony service connect the Glasstron to just ane audio facility output jack you will hear sound from only one of the stereo earphones Connecting the power source Connect the AC power adapter AC PLM3 supplied to the D
51. the front pad against your forehead adjust the angle of the display unit using the two hinges Move the display unit close to your eyes at a slight downward angle If you wear glasses move the display unit as close to the lenses as possible Adjust the stereo earphones Earphones Pull the earphones out slide button To adjust the slack reel in the earphone cord by pressing the slide button in the direction of the arrow Stereo earphones Adjusting the back strap Attaching the sunshades If the strap does not fit properly in step 3 You can attach the supplied sunshades if adjust the strap by changing the belt length you like The sunshades prevent the LCD screen from reflecting light that may interfere with the picture Attach the sunshades on the right and left sides of the display unit Pull out the tab of the sun shade then insert the tabs into the holes on the display unit as shown below Display unit Sunshades supplied Turning on the Glasstron After you complete all of the connections and put on the Glasstron properly turn on both the Glasstron and the connected equipment and follow the procedures below Checking the display unit position This page Checking the screen position alignment Page 25 Setting a password Page 28 If you do not want to use a password you have to set the Glasstron to operate without using a password in Setting the password Checking the display unit p
52. to Volume Limiter System Turn the jog dial to set to ON then press the jog dial Cd sex d Exec When AVLS is on the volume does not become louder than the level you set even if you turn the VOL control MEGA BASS Turn the jog dial to select the desired value then press the jog dial 2 Maximize the bass sound 1 Boost the bass sound 0 Normal bass sound fd seu d exec 385 POWER SAVE Turn the jog al set to ON then pr th jog dial Ne POWER SAVE D AM ort ZA sei d exec When you take off the display unit while the POWER SAVE is set to ON the POWER SAVING SENSOR page 14 is activated and automatically turns off the picture and sound The picture and sound resumes a few seconds after putting the display unit back on When POWER SAVE is set to ON you can monitor the status of the Glasstron by checking the POWER POWER SAVING indicator Status POWER Picture Power POWER consumption SAVING indicator Normal Lit in Normal 100 green Power Lit in No 5 save orange picture mode Note The power saving function of the Glasstron does not work together with the power management function of your PC Adjusting the RGB signal It is recommended to adjust the picture after installing the information file included in the supplied Windows 95 Windows 98 PC Glasstron information disk or the screen adjustment disk for Macintosh For details on how to install the
53. tructions for safe fit 9 M N O Mega bass 36 38 P Q Password 28 Power save 38 Precautions 43 R Remaining battery life 42 Resetting adjustment 40 password 29 S T U V Safety instructions 6 Safety password 6 9 28 Screen alignment 26 Screen mode 34 See through mode 34 Signal compotibility 35 Signal synchronization 39 Stereo earphones 22 Sunshades 22 Supplied accessories 13 S video 19 T U Tracking 39 V Vertical position 39 W X Y Z WARNING messages 23 25 33 Warnings for electronic products 10 Wearing the Glasstron 21 uo ewunoguj jeUCHIPPY 49us OX es e Ge ge Vi 2 z AA 00 RSE RS TROT RRS SEL AL NS SEL ROSS RTS RS SAS lt as SE EE EE EE CONN Cow aN la la Video Products r Ze E ons DR BCX SE SOS OO ILE aen SOC SR DO Ds E RK Zi D ee SIR TRANS Ge SAA EE Q SC La LIMITED WARRANTY Ki By Get amp Lo gt ee Re Sony Electronics inc Sony warrants this Product including any accessories against defects in material or SERS SS workmansnip as follows NE 1 LABOR For a period of 90 days from the date of purchase if this Product is determined to be defective KZ y E Sony wiil repair or replace the Product at its option at no charge or pay the labor charges to any Sony autho BS rized service facility After the Warranty Period you must pay for ail labor charges RKP Wi d S y J
54. ution and the vertical frequency on your PC to match the supported output frequency page 35 Refer to the instruction manual of your PC Change the screen resolution or the vertical frequency of the external display output signal on your PC to match the supported vertical frequency page 35 Refer to the instruction manual of your PC Change the display mode on your PC to the external monitor only page 39 Disconnect the AC power cord from the wall outlet After three minutes reconnect the AC power cord or IOANNINA 470 430s Specifications Power supply AC power adapter AC PLM3 100 240 V AC 50 60 Hz 16 W Output Voltage 8 4 V 1 6 A Battery pack NP F550 NP F750 NP F950 not supplied Power consumption 10 W approx PC mode 12 W approx VIDEO mode Operating temperature 41 F to 95 F 5 C to 35 C Storage temperature 14 F to 140 F 10 C to 60 C Dimensions Display unit Approx 57 s x 1 5 16 x 3 1 2 inches Approx 149 x 48 x 86 mm w h d folded Power supply box Approx 2 4 x 17 s x 6 s inches Approx 54 x 47 x 160 mm w h d not including projecting parts and controls Mass Display unit Approx 4 2 oz 120 g Power supply box Approx 9 2 oz 260 g Video signal NTSC color EIA standards input PC mode RGB signal HD15 Pin Assignment Pin No Signal 1 R Red 2 G Green 3 B Blue 4 e 5 GND 6 R Red GND 7 G Green GN
Download Pdf Manuals
Related Search