Sharp AN-65AG1 User's Manual
Contents
1. This operation manual and the product use various displays and labels to ensure safe use Ignoring these displays and labels and incorrectly using the product could have results as classified below Please read the following warning symbol information before reading the rest of this section and be sure to strictly observe all instructions re A Warning Not following these instructions could result in death or serious injury A Caution not following these instructions could result in injury or property damage Meaning of symbol The symbol OQ means something that should not be done Special Precautions for Safety e Follow the instructions in this manual regarding the installation method and installation orienta tion Not following these instructions could results in injury or damage from falling parts e Accurate work is required for the installation work so please have it done by the dealer or qualified contractor e During installation be careful not to pinch your fingers in the fixture etc e Make sure the installation wall is sufficiently strong to support the weight of the TV Attach the fixtures to the reinforcing material in the walls e Do not apply any other loads to the installation fixtures Doing so could cause the TV to fall causing injury and damage e Do not modify or change the installation parts Doing so could cause the TV to fall causing injury and damage Install in a location with2. Phillips head screwdriver Installation location e LCD color TVs have a viewing angle range in which the image can be viewed correctly The best viewing position is from directly in front of the screen Determine the TV installation location after taking into consideration the viewing posture line of sight and the visual and aural ranges e Sharp shall bear no responsibility for damages etc caused by the LCD color TV falling due to insufficient installation strength or improper installation Weight table Unit kg Destination Appropriate Model unit market Model no stand Japan LC 65GE1 Approx 65 5 Approx 10 5 Approx 76 0 Fixture Total Weight E 3 ENGLISH SE i Wall Mount Bracket Installation Included part installed 1 Use tape or other means to mark the measured positions on the wall where the display will be installed The center of the X drawn from the four corners of the square marks the center of the panel AE 2 Take the coin with the string and align it perpendicular to SS the base bracket Use a pencil etc to mark the two screw hole locations Determine the location where the base bracket will be Dimension lines used as a guide Cellophane tape etc C3 Cellophane tape etc ER ap Jh shaped screw ou S Use a pencil etc to xr Wall mount bracket 8 mark the screw hole u
3. low humidity and little dust Install in a well ventilated area S e Do not install the LCD color TV ina S e Do not plug the air passage holes in location with high humidity and much the LCD color TV cabinet Plugging dust Doing so could result in fire or the air passage holes could trap heat electric shock inside the cabinet causing a fire D Do not place the LCD color TV where it S Do not use the cabinet as follows will come into contact with oily smoke Do not place the cabinet in a place or steam such as near a cooking with poor air circulation such as ina range or humidifier Doing so could closet or bookcase Do not place a result in fire or electric shock drop cloth etc on the installed LCD color TV E 1 ENGLISH D Please strictly observe the following Special skill is required to install the LCD color TV so please have it installed by a contractor specializing in such installation The customer should not attempt to install the TV Sharp shall not be responsible for improper installation or any accidents damage or injury resulting from improper installation To the contractor e To ensure the safety of the customer conduct the design so that the strength of the installation location is sufficiently strong to support the weight of the LCD color TV and the wall mount bracket e Be sure to use two or more people to conduct the work e The wall installation screws for the wall mount bracke
4. SHARP Ra 7 gt 7 LERF LCD Color TV Wall Mount Bracket T l viseur couleur LCD et le support de montage au mur Wandhalter f r LCD Farbfernsehger t M nsula de montaje el TV color de cristal liquido en la pared ee EE ML A BE ERREUR KML TE UEKCADC THAR ne ESRD lt EEL e The wall bracket mounting screws are not in cluded with the product so please separately purchase off the shelf screws e Les vis de fixation du support a base ne sont pas fournies avec le produit veuillez donc acheter s par ment des vis en vente dans le commerce e Die Wandhalter Befestigungsschrauben sind nicht im Lieferumfang des Produkts enthalten Besorgen Sie sich daher bitte im Handel erhaltliche Schrauben Los tornillos de montaje de m nsula en la pared no vienen con el producto compre los tornillos por separado en la tienda MEn t TARAM ee RZ is 2 MT Emo SE Wika HAS OPERATION MANUAL MODE D EMPLOI BEDIENUNGSANLEITUNG MANUAL DE MANEJO 48 FAL ABB ESPAN d Used Models Mod le utilis Gebrauchtes Modell Modelo usado i 2 5 LC 65GE1 SE e Thank you for purchasing a SHARP product Before using the product please be sure to read this operation manual carefully In particular be su to read the section To Ensure Safe and Correct Use After reading the manual keep it in a convenient location where it can be accessed at any time To Ensure Safe and Correct Use
5. emble the included angle setup brackets as shown in the illustration and then use them to set the TV to the desired angle For the screws use the included angle setup bracket screws M8 length 15 mm x 2 screws and screws removed in Step 1 First loosely tighten the 4 screws and then securely tighten them after the angle setup bracket is set to the desired position The numbers 5 10 15 and 20 at the screw holes mean that the higher the number the more the LCD color TV slants downward The angle that can be set is limited depending on the TV model E 7 ENGLISH SE Remove the stands E 8 e Be sure to use at least 3 people for the work from this point onward e Be very careful when holding the LCD color TV at a slant or when lifting it up Lift up the LCD color TV and remove the stand While the stand is being held down lift up the LCD color TV to remove it from the stand Remove the LCD color TV from the stand while tipping it backward slightly Hold down the stand so that it does not move Temporarily place the LCD color TV on a cushion or soft material and install the stand hole covers that are included with the LCD color TV Hold the LCD color TV at a slant and align the stand hole covers included with the LCD color TV with the stand insertion locations Use the screws removed during Step 3 on page 6 to attach the stand hole co
6. ers 1 Pass through the band 2 Pull the band forward and catch it on the hook Remove the screw hole plugs 4 plugs of 6 the wall mount bracket on the back of the TV and then screw in the 4 wall mount bracket unit screws hexagonal socket screws M10 length 30 mm that are in cluded with the wall mount bracket unit Screw hole plugs 4 plugs A Allen wrench SY Hexagonal socket screws M10 length 30 mm 7 oe ee as Carefully keep the removed screw hole plugs E 6 ED DT Included hexagonal socket screws 4 screws D e HE Use an Allen wrench to screw in the included hexagonal socket screws into the Mark A holes SE Set the angle of the wall mount bracket 2 e Please perform this work before mounting the LCD color TV on the wall e When setting the angle of the wall mount bracket be careful not to pinch your fingers etc Remove the perpendicular positioning screws from the wall mount bracket 2 screws each on the left and right sides Hole at the very top Included part SS Angle setup bracket screws Angle setup bracket M8 length 15mm 2 screws These screws are used for the angle setup in Step 2 Ass
7. nit installation hooks E String position on the wall 5 Base p5 KU behind the bracket Q bracket gt Center outline line Position the base eo Display bracket so that the Position the base outline center of it is aligned bracket So that the TE ee alte Sting rc perpendicular parts Se Z of it are parallel with Den 1572mm eat ey the string Seed gt When marking on the wall use a material that will not leave a permanent mark on the wall and get the approval of the customer before beginning the work Tighten the screws 2 Temporarily remove the base bracket from the wall and loosely screw in off the shelf screws 8 mm dia x 2 screws in the screw hole positions marked on the wall At this time the screw heads should extend more than 4 mm above the wall so that the base bracket can be hung on the screw heads Hang the base bracket on the installed screws check to make sure the bracket is not sagging to the left or right and then firmly tighten the screws Use off the shelf screws to secure the remaining screw holes 15 screws The screw hole diameter is 9 mm see AA _2 2 2 2 8 used in Step 1 to make sure the bracket is perpendicular Use the weight with the string 1 EA GE Installing the wall mount bracket For Model 65 inch Separate Type e Be sure to use at least two people to perform the wall mount bracket installation work for the LCD col
8. or TV eS e The installation work must be conducted while the LCD color TV is standing upright so be careful that it does not fall over Place the LCD color TV on a strong stand about 20 to 30 cm high and remove the two back terminal covers Remove the terminal covers while the LCD color TV is standing upright 2 covers top and bottom Remove the 3 fastening screws from both the left and right stands on the back of the LCD color TV Keep the removed screws short x 2 screws long x 4 screws Short screw 1 Remove the 2 screws from each of the stand edge covers total of 4 screws from the 3 left and right sides Use the removed screws total of 4 screws as shown in Step 2 on page 9 2 Remove the stand fastening screws 2 screws each on the left and right sides Removing the edge covers reveals the stand fastening screws in the Edge cover screws center of the stands so remove these screws E 5 p ENGLISH T SE Installing the wall mount bracket Continued 4 Connect the system cables and power cord to the terminals on the back of the LCD color TV Power cord Use the cable holder at the center of the back of the LCD color TV and the cable holders holding the speaker cables to connect the system cables Surround the system cables Cable hold
9. ts are not included with the fixtures Select off the shelf screws that match the wall Outside dimension drawing Base bracket Mark A At a height at the center of the LC 65GE1 screen Wall mount bracket E 2 SE Wall mount bracket 1 Angle setup bracket 2 k SES Assembly completed for perpendicular installation Allen wrench 1 Screws For fastening the For the angle setup For installing the wall wall mount bracket bracket mount bracket unit P DADA Operation manual g A EPS This manual M6 length M8 length M10 length 8mm 2 screws 15mm 2 screws 30mm 4 screws with hexagonal sockets The screw notation M6 means the diameter of the threaded part is 6 mm Please also store the screws that are not used Please use the following e Wall installation screws off the shelf 17 Be sure to consult the dealership or a qualified contractor when installing the TV e Stand hole covers x 2 Included with the LCD color TV e A plumb bob made by tying a coin with a hole in it to the end of a string e A pin such as a thumbtack e Cushion soft cloth etc e Tool
10. vers and speaker cables Stand hole cover mp Installing the LCD color TV on the wall e Be sure to use at least 4 people when installing the LCD color TV to the base bracket e Be sure to perform Steps 1 and 2 below Only performing Step 1 could result in the display falling and injuring someone Install the wall mount bracket attached to the LCD color TV to the base bracket 1 Hang the square holes of the wall mount bracket on the hooks see page 5 of the base bracket unit Check to make sure the hooks are securely inserted into the notches at the top of the slanted ENGLISH side of the wall mount bracket unit Hook H Ae Sg 1 e el K Wall i Vj Included part 2 Fasten the screws in the wall mount bracket unit and bottom of the base bracket Be sure lt P Wall mount bracket fastening screws to do this S M6 length 8mm 2 screws Fasten using the included wall mount bracket fastening screws M6 length 8 mm x 2 screws E 9 SHARP SHARP CORPORATION Printed in Japan Imprim au Japon Printed on 100 post consumer recycled paper 06E DSC1 Imprim sur 100 de papier recycl TINSE1082MPZZ 1
Download Pdf Manuals
Related Search