Sanyo CE28DFN2-B User's Manual
Contents
1. Child lock 3 Press PA or PW to select Child lock press to select ON or OFF The child lock mode will be reset to OFF when the TV set is switched off with the Mains ON OFF switch Setting of AV2 input mode If you use a VCR which has S VHS you should connect it to AV2 and change the AV2 menu to S VIDEO 1 Press PW to select AV2 press a or a to select S VIDEO VIDEO f Picture e Soung O Child lock E Via Setting gt B gt g AV2 VIDEO Preset v 2 Press MENU button repeatedly to exit B e p gt 13 MENU OPERATION Anologue channels Preset menu The preset menu can be used to tune new channels to reorder channels and their programme positions and to make fine adjust ments to the tuning There are two ways to tune in new channels Auto Searches for all channels and stores them automatically Semi Manual search to add channels E Tuning Auto 1 Press the MENU button to select main menu 2 Using A or V select Preset press gt and select Tuning using A or Y buttons Picture O Fimer Tuning gt Auto Setting Swap gt or Se g 9 OW Sn 3 Press gt to select Auto and V to select Channel CH 34 as shown t CH 22 A g CH 21 E gt O oe mp aD o memory o EO CH 21 v CH 22 Press the lt 4 or gt all available channels are2. Gaelic and prefer to receive Welsh Gaelic audio when it is transmitted then select Welsh Gaelic for your first Language and English as your second 4 Press lt or gt to select Language press A or W buttons select second language and change your preference using lt or gt buttons 8 Subtitling Select your preferences as required If you wish for Welsh or Gaelic Subtitles instead of English to be shown when available then select your preference for the first language Example as shown will give you English first language if not available Welsh may be shown 5 To change press A or W buttons to highlight the box and press 4 or to select your preferred First language and repeat for Second language 6 Press W button to select Subtitle display This can be set ON or OFF by pressing lt or gt buttons 7 Press OK to Save This takes you back to Configuration menu screen Change Parental Code See page 7 under Parental lock Press MENU to return to normal TV Picture Common Interface This TV set provides a common Interface slot on the rear of the TV set l cl F a yf 1 Press MENU to select Main Menu EC LAV aa 2 Select Configuration by using A or W buttons Press to enter 3 Press W button to highlight Common Interface and press gt to enter The following screen appears to show that a card is inserted When you s
3. Repeat until all channels you wish to lock are selected 6 Press OK to Save This takes you back to Channel List Menu To return to normal picture press MENU button DIGITAL OPERATION Parental lock How to watch a locked channel 1 Select a locked channel Parental lock display appears seec oOo 2 Press OK button enter the Parental code and press OK again 3 The channel is temporarily unlocked until the channel is changed 4 Press MENU button to return to normal TV picture 2 If Parental lock is activated and you wish to record this locked channel deactivate first before setting timer recording To deactivate parental lock 1 Press the MENU button to select Main menu 2 Enter the Parental code 3 Press OK to enter menu functions 4 Use the A or V buttons to select Parental unlock press to enter 5 Press Red button to deactivate 6 Press the MENU button to exit 2 Main menu screen will show either Parental Lock or Parental Unlock if it is use 2 Once you have activated Parental Lock each time you need to enter the Main Menu you will need the code Configuration Preferred language 1 Press MENU to select Main Menu 2 Select Configuration by using A or W buttons Press to enter 3 Press W button to highlight Preferred language and press to enter Audio Select your preferences as required Example If you speak Welsh
4. a Colour Sharpness cmemory D gt Storing personal picture preferences If you have altered any of the settings in the Picture menu you can store them You can be recall again later In the picture menu select memory by pressing the W button Press the gt button a tick appears in the box and the settings are stored Press the MENU button repeatedly to exit the menu Press the MENU button and select Sound using A or V buttons press the button to enter Select and adjust to obtain the best sound settings for your environ ment using A V and lt gt buttons Press MENU to return to Main Menu These settings automatically store when you exit the menu Press MENU repeatedly to exit menu 6 You can set up different user lists to allow quick access to your favourite channels E Setting User Lists 1 Press MENU button to select main menu Qourtviists 2 Select User Lists by pressing V button 3 Select Your TV lists menu by pressing gt button 4 Select a List eg List 1 by pressing A or Y button Enter by pressing gt button 5 Press to add channels to your list Use A or W to highlight chan nel selection Press OK to add to your list a X will appear next to the channel 1 BBC ONE 6 Repeat to add all the channels you want in your list 7 Press Blue button to save selection 8 Add more
5. accessories that have not been specifically designed for this television Do not drop or push objects into the television cabinet slots or openings Some internal parts carry hazardous voltages and con tact may result in an electric shock hazard Never spill liquids of any kind on the television receiver Do not place items such as vases containing liquid on top of the TV set Do not expose the television receiver to rain or use near water For example near a bathtub kitchen sink in a wet basement etc Before cleaning unplug the television receiver from the wall socket Never stand on lean on or push the tele vision or its stand Never allow children to play with the television or its stand Serious injury may result if it should fall Do not apply liquid cleaners or aerosol cleaners directly onto the television receiver Use a damp cloth for cleaning Do not place candles or hot objects upon the TV next to it or behind it Open flames must never be used near the TV set INSTALLATION Please make sure that you have read the End User section on page 2 Connecting DVD VCR player or Satellite receiver before you activate Plug and Play We recommend that you connect all other equipment before Plug and 7 7 z Play The following examples are our recommended standard Step 1 Connections Essential connection For further information please consult your local dealer Connect your aerial cable socket to the back
6. be destroyed to avoid a possible shock hazard should it be inserted into a 13Amp socket elsewhere The wires in this mains lead are coloured in accordance with the following code gt Neutral Brown gt Live Install two AA 1 5 volt batteries so that the and marks on the batteries match the and marks inside the unit into the remote 1 The Blue wire must be connected to the terminal whichis marked control handset with the letter N or coloured BLACK 2 The Brown wire must be connected to the terminal with the letter L or coloured RED 3 Do not connect either wire to the earth terminal in the symbol or coloured GREEN or GREEN and YELLOW Before replacing the plug cover make certain that the cord grip is clamped over the sheath of the lead not simply over the wires INSTALLATION Step 3 Switching on Plug amp Play Press the Mains on off switch on the front of the TV set The self automatic tuning system called Plug and Play will start The TV scans D the analogue channels first and then VPA switches to digital channel mode and scans digital channels This could take up to 15 minutes During automatic tuning the TV displays the tuning status of analogue and digital channel tuning on the screen Thank you for purchasing your SANYO TV Now I am searching and storing all mp Analogue Set up completed programmes Plea
7. caused by the receiver GHOSTS Reflections of signals from mountains or high buildings will cause multiple images called Ghosts These abnormal conditions can be reduced to minimum by repositioning aerial or by installing new one suited for your area INTERFERENCE Interference may be caused by electrical appliances car ignition systems etc This should normally be a temporary condition but should this interference persist contact your dealer 18 Servicing Your television is fully transistorised and does not contain any user serviceable components You must not remove the rear cover of the TV by yourself The apparatus is working with high voltages and could damage objects or even endanger people Leave all required repair and service jobs to an authorised service technician He will exclu sively use such spare parts that are complying with the same safety standards as appliciable to the original parts The use of original spare parts can prevent fire shock and other hazards Unplug the television receiver from the wall outlet and refer servicing to qualified service personnel under the following conditions E If the power cord or plug is damaged E If liquid has been spilt into the television receiver E If television receiver has been exposed to rain or water E If the television receiver has been dropped or the cabinet has been damaged E If the television receiver exhibits a distinct change in performanc
8. stored To cancel this tuning operation press the MENU button repeatedly After completing this procedure the TV set returns to normal TV mode and selects programme position 01 2 You can change the order of the station selection by using the channel swapping function detailed later You do not need to use Memory function at this stage as all channels are automatically saved Tuning Semi 1 Press the MENU button to select main menu 2 Using A or V select Preset press gt and select Tuning using A or Y buttons ee oun H San Tuning Setting Swap Preset Fine Tuning Auto or Semi CH 34 P 02 Skip OFF memory e dD 3 Press gt to select Semi and V to select Programme position P 04 as shown where you want to store a channel eg CH4 P 06 FF P 05 Skip OFF P 03 memory P 02 4 Select the channel search CH 34 and start searching by pressing the lt or buttons CH 36 4 CH 35 T a i ag o fee Gai x CH 33 5 When a channel is located searching stops If you do not want this channel press lt 4 or gt to search again 2 You can enter a channel number directly with the 0 9 numeric buttons if you know the number 14 Skip Skip ON in normal operation when the A or V button is pressed this position will be skipped ON Skip OFF OFF Omemory Skip OFF P
9. the set will switch off is displayed on the screen A No signal will also appear in digital mode 2 When the TV set is switched on by using the ON Timer function with no signal being received this function will be ignored E Use of Audio Output Jacks This TV provides the audio monitor output jacks on the rear of the cabinet back You can connect your audio equipment to these jacks to give you sound through your audio equipment DOODDODONOOOOO0000000000000000000000 DOOOOOOOOO D000 DO000000 DOO OODOUO OOODOOO 16 OPERATION E Screen options Today there are various transmission formats with different size am s TITLES REEN Letterbox Video ratios eg 4 3 14 9 16 9 and video formats such as letterbox E AUTO It automatically switches to the optimum screen mode according to As Zoom 16 9 As Zoom 16 9 As Zoom 16 9 As Zoom 16 9 the WSS signal provided in the receiving signal source If the signal ee eae es oe ee does not have it the TV keeps current screen mode more to allow more to allow more to allow more to allow subtitles to be subtitles to be subtitles to be subtitles to be 2 This setting may cause the picture to change when a different for seen seen seen seen mat is received eg when an advert is received 2 WSS Wide screen signalling Some broadcasters transmit this signal and some VCR tapes have it included The signal identifies the picture format
10. this can result in fire or electric shock Slots and openings in the cabinet and in the back or bottom are provided for ventilation to ensure reliable operation and to protect it from overheating These openings must not be blocked or cov ered The opening should never be covered with a cloth or other material and the bottom openings should not be blocked by plac ing the television receiver on a bed sofa rug or other similar sur face This television receiver should never be placed near or over a radiator or heater This television receiver should not be placed in a built in installa tion such as a bookcase unless proper ventilation is provided Do not place your television receiver on an unstable stand shelf or table Serious injury to an individual and damage to the television may result if it should fall Your sales person can recommend approved stands or shelf and wall mounting instructions MINIMUM DISTANCES 5cm 10cm 10cm j oe Ot 20cm If the television is built into a unit or enclosed the minimum distances for ventilation must be maintained Heat build up can reduce the life of your television and can be dangerous 2 This television receiver should be operated only from the type of power source indicated on the television or as indicated in the Operating Instructions If you are not sure of the type of power supply in your home consult your sales person or your local power company Never add
11. 58 Coloured buttons Some channels have interactive services Use the red button to enter and other colours as directed Also used in menu functions Programme up and down To select the next programme number or previous programme number INFO Shows the current and next programme on the selected channel refer to page 11 D A selector To switch between analogue and digital channels Return Returns back to previous screen in menu Exits interactive mode Subtitle Displays sub titles On and Off You may need to switch to title in by pressing WIDE button See page 17 DIGITAL OPERATION The main menu screen takes you to many functions in the TV The buttons below are the main buttons and their uses MENU button Enters and exits menus Cursors A and W moves up and down in each selected menu Cursor 4 changes levels moves to the left and returns to previous menu Cursor gt changes levels moves to the right and enters next menu RETURN button Returns to the previous screen Refer to bar at bottom of screen for added help in which buttons to use 1 Press the MENU button and select Picture using A or V but tons 2 Press to select Select using A V buttons and adjust to obtain the best picture set tings for your environment using lt gt buttons A D ha O Brightness ontrast Colour Sharpness o memory Brightness Contrast
12. EO S VIDEO Preset Tuning Swap Fine Tuning SEMI AUTO CH 34 CH 34 P 04 P 04 Skip OFF Skip OFF Memory Memory During the menu operation the following buttons are used MENUE a To navigate forwards to the next screen or to amp D activate settings 1 Press the MENU button to select main menu select Picture using A or V buttons t t Picture Sound Contrast Timer Colour Setting 4 Sharpness Preset Text bright o memory To enter the menu function To go back and to exit the menu function To navigate up and down in the menus ees Oy Brightness 2 Press to enter Select and adjust to obtain the best picture settings for your environment Text bright Brightness of Teletext screen MINIMUM CENTRE MAXIMUM Tint Colour phase if NTSC equipment is detected E Storing picture preferences If you have altered any of the settings in the Picture menu you can store them You can be recall again later In the picture menu press PW to select memory Brightness Contrast O Colour Sharpness omemory D gt E Press the button a tick appears in the box and the settings are stored 1 Press the MENU button to select main menu and using PA or PY select Sound 2 Select and adjust to obtain the best sound settings for your environment using PA PW or Bass Setting Tre
13. House Otterspool Way Watford Hertfordshire WD2 8JX Tel 01923 246363 19 Part No 1KA6P1P0046 C C6AD BD SANYO Printed in U K
14. SANYO INSTRUCTION MANUAL CE28DFN2 B CE32DFN2 B Colour Television Please read this Instruction book before using your television We wish you many hours of pleasure from your new television END USER LICENCE amp SAFETY PRECAUTIONS End User Licence The product meaning the equiment or appliance to which this docu mentation relates incorporates Software the software applications utilities and modules embedded within the Product which is owned by Sanyo or its licensors Before using the product please read the End User Licence Conditions detailed below If you do not agree to the terms and conditions of the End User Licence Please do not pro ceed to use the Product repack the Product unused and return it to your supplier together with proof of purchase for a full refund By using the product you agree to be bound by the terms and conditions of the End User Licence Licence Grant Conditions and restrictions 1 Sanyo grants you a non exclusive world wide subject to export controls non transferable except as permitted by 2 below royalty free licence to use the Software upon and with the Product 2 You may not transfer any or your licence rights in the Software without the prior written consent of SANYO and if consent is pro vided then the Software shall only be transferred in conjunction with the transfer of the Product AND provided that the transferee has read and agreed to accept the terms an
15. Swap channels 1 Choose a channel that you wish to swap with another by pressing the A or V buttons Press the Yellow button to enter the Swap screen 2 Use 4 gt and numeric buttons to enter channel number and press OK to swap When in swap screen you can press RETURN repeatedly to take you back a screen 3 Add more channels move selection rename list remove or swap or press the OK button to finish the list or MENU to exit 4 Press Menu to return to normal picture Using User Lists When watching a digital channel Press the gt button A title bar appears at the bottom of the screen with each press of the gt but ton it will select All channels and all your set user lists Use the A or V buttons to browse through the list the TV will switch to this channel Only channels in the selected list will be browsed Parental lock Parental lock can be used to block entry into the Menu functions and to allow you to block access to selected channels The first time you use this function the code numbers are 1 2 3 4 If you forget the code there is a default code 6 9 3 1 this will always give you access to Parental lock How to change the code to your own preference 1 Press MENU to select Main Menu 2 Using A or W buttons select Configuration and press gt to enter 3 Press W to select Change parental code Press gt to enter 4 Enter Old code into yellow box which is highlighted using the 0 9
16. ble Preset Balance p 3 Press MENU button repeatedly to exit Timer menu E Off timer setting The Off timer will switch the TV set into the standby mode when the selected time has elapsed 1 Press the MENU button to select main menu Press PA or PV to select Timer 2 Press to enter OFF Timer 3 Press button and highlight time setting column by pressing the PA or PV buttons time setting column A gt OFF Timer_ 00 30 i Ag gt OFF Timer_ 00 30 H Not set Set When the time setting column is selected its colour changes to yellow The time changes in 30 minute steps The maximum time is 2 00hrs When you are ready to store your settings press the button and the setting column numbers colour changes to green The tick appears as shown above and its colour changes to yellow If you have set the off timer then one minute before the TV switches a display appears on the screen 4 Press the MENU button repeatedly to exit the menu 2 If the TV set is switched off by the Mains Switch or you enter the preset mode the timer settings will be cancelled E Child lock You can prevent small children from operating the TV with the front buttons of the TV set 1 Press the MENU button and select main menu 2 Press PA or PY to select Setting press to enter Child lock AV2 menu Picture Sound OQ Timer Setting Preset
17. channels move selection rename list remove or swap or press the OK button to finish the list or MENU to exit E Move selection To change the order of channels in your list 1 Select the channel you wish to move using the A or Y buttons 2 Press the Green button to select the channel 3 Use A or Y to move to a different position 4 Press the Green button to save the new order Repeat steps 1 4 until all channels are in the order you need 5 Add more channels move selection rename list remove or swap or press the OK button to finish the list or MENU to exit E Rename List 1 Press Blue button to rename your list see picture 2 Use lt or gt to move left or right 3 Use A or V buttons to choose a letter symbol or number A Z 0 9 etc 4 Press OK to save new user list name 5 Add more channels move selection rename list remove or swap or press the OK button to finish the list or MENU to exit DIGITAL OPERATION E Remove a channel 1 Highlight a channel to be removed 2 Press Red button and it will be deleted the screen shows a red line through it To deselect a deleted channel press Red button again 2 Red button refers to coloured buttons Red Green Yellow and Blue Do not get confused with larger Red Standby button 3 Add more channels move selection rename list remove or swap or press the OK button to finish the list or MENU to exit E
18. d conditions of this licence 3 You must ensure that the copyright trademark and other protective notices contained in the Software are maintained and not altered or removed 4 The Software provided hereunder is copyrighted and licenced not sold SANYO especially does not transfer title or and ownership rights in the Software to you The Software provided hereunder may contain or be derived from portions of materials provided to SANYO under licence by a third party supplier 5 Except as expressly permitted by statute you may not e use the Software in conjunction with any other computer hard ware other than the product e copy all or part of the Software incorporate all or any of the Software into other programs developed by or on behalf of you and or used by you reverse engineer decompile or disassemble the Software e make the Software or any part of it available or permit its redistribution for use with any computer hardware other than the Product or rent lease gift loan sell distriobute or transfer posess sion of the whole or any part of the Software Termination This licence is effective until terminated This licence will terminate automatically without notice if you fail to comply with any of its provi sions Disclaimer 1 The Software is to the extent permitted by law supplied as is and SANYO and its suppliers expressly exclude all warranties express or implied including bu
19. dphones are inserted the sound from the TV speakers is muted 3 5 mm Mini Headphone din AV3 Video in AV3 Left Audio in AV3 Right Audio in 260 50 2 REMOTE CONTROL Digital Use Sound mute To switch the sound from the speakers The sound changes as follows Normal volume gt Half volume gt Mute TV AV switch To switch from Digital TV AV1 AV2 or AV3 mode press repeatedly Direct programme selector For direct access to programmes using 0 9 numeric buttons for example for channel 23 press 2 and 3 numeric buttons Volume up down To adjust the sound level MENU To switch on the screen display menu on off See page 6 Cursors To select the sub menu items in the menu display Up Down Left Right Guide To call up the Digital TV schedule guide display on the screen refer to page 11 Surround mode selector To select the surround mode ACTIVE MONO or OFF OK To save the setting in the menu or to call up the All channel table Bass selection To get an emphasised bass sound ON or OFF Screen mode selector To select the screen mode AUTO NATURAL ZOOM14 9 TITLE IN 14 9 ZOOM 16 9 TITLE IN 16 9 FULL or NORMAL Standby Power on off To switch the TV on and off Also see page 14 Picture mode selector To access a series of picture modes PERSONAL STANDARD ECO and DYNAMIC System selector To select the colour system in the AV mode AUTO PAL NTSC 4 43 or NTSC3
20. e E If the television receiver does not operate normally by following the operating instructions Adjust only those controls that are covered in the operating instruc tions as improper adjustment of other controls may result in damage This will often require extensive work by a qualified technician to restore the television receiver to normal operation WARRANTY TO CUSTOMER Sanyo U K Sales Ltd the company warrants to the initial retail purchaser that if this equipment is or becomes defective and that in the opinion of the Company the defect is due to faulty material or workmanship the Company will for a period of 12 calendar months from the date of sale to the original purchaser repair or replace at its sole option free of charge any such defective component part of the equipment always provided that 1 The equipment has at all times been used in accordance with the operating instructions issued by the Company and has not been connected to an electrical mains supply for which it has not been adjusted 2 Accidental damage or damage caused by negligence of misuse by the user is specifically excluded 3 Unauthorised repairs or any modification to the equipment which has not been expressly approved by the Company shall render this warranty null and void 4 Failure due to fair wear and tear of any item is specifically excluded This warranty is not transferable and is only applicable within the United Kin
21. e maximum time is 2 00hrs When you are ready to store your settings press the gt button and the time colour changes to green The tick appears as shown above and its colour changes to yellow If you have set the off timer then one minute before the TV switches a display appears on the screen Press MENU button or RETURN button twice to return to normal TV picture If the TV set is switched off by the Mains Switch or you enter the preset mode the timer settings will be cancelled DIGITAL OPERATION TV Setting menu E Child lock You can prevent small children from operating the TV with the front buttons of the TV set Press the MENU button to select main menu Press A or V buttons to select TV settings Press to enter menu A OFF n O hidio on Tc Vv Press A or W buttons to select Child lock can be set to ON or OFF Press lt or gt buttons to select The child lock mode will be reset to OFF when the TV set is switched off with the Mains ON OFF switch Setting of AV2 input mode If you use a VCR which has S VHS you should connect it to AV2 and change the AV2 menu to S VIDEO i Child lock ob aad G vw D 4 Press W to select AV2 and select VIDEO or S VIDEO by pressing 4 or gt buttons Press MENU button or RETURN button twice to return to normal TV picture The guide shows the digital TV schedule for the next 2 hours The guide can show all channels or any set us
22. elect OK follow the on screen directions This will vary depending on the type of card inserted Important The TV should be turned off by the Mains Power switch when insert ing or removing the Common Interface Card otherwise it may cause damage to the card or the TV set DIGITAL OPERATION Channel List Edit channel list 1 Press Menu button to select Main Menu 2 Select Channel List by using A or V buttons Press to enter Select Lock channels by using A or V buttons Press to enter ao 4 To delete channels from this list use A or Y buttons to highlight a channel 6 To lock or unlock parental locked channels select the channel and press the yellow button This will lock or unlock the channel 7 Press the OK button selected channels will be locked unlocked and parental lock unlock stored You will go back to Channel List menu Scan for channels 1 Press Menu button to select Main Menu 2 Select Channel List by using A or V buttons Press to enter 3 Press W to select Scan for channels Press gt to enter This will scan all available channels This is a useful function if you delete channels and want to get them back later 4 Press OK to save All Channels 5 Press OK again to watch normal TV picture 2 Parental lock is still saved after the scan for channels has been initialised Technical Information In this section a lot of the information will on
23. er lists see page 6 Press the gt button to select all channels or a user list then press GUIDE button A schedule will appear on the screen TV Schedule Wed 12 44 User list 1 20 0802003 Today 14 00 BBC 1 XXXX XXXX XXXX XX XXXX ITV XXXX iny XXXX Lunchtime News Channel 4 XXXX XXXX five XXXX XXXX XXXX UKHistory XXXX XXXX XXXX 12 30 12 3012 30 ITV Lunchtime News ini Main national amp International news nfo Use the A or V buttons to move up and down the channel list Use lt or P buttons to highlight the programmes below the transmission time progress and a brief programme explanation will be displayed Press the button to get more information on that programme When you press the info button in digital mode you will be displayed a cut down guide showing only the channel you are currently on Wed 11 44 a 20 0802003 11 30 12 30 l ITV Lunchtime News 12 30 12 50 Main national amp International news KIE Now cuiae TV Schedule Change channel Press the lt or gt buttons to select current programme or next Press the GUIDE button to go to the full guide Press the PA or PY buttons to change to the channel Programme Download From time to time upgrades will become available When this hap pens the following screen appears Version a Date To upgrade press the OK button and t
24. gdom and the Republic of Ireland Nothing in this express warranty affects the statutory rights available to the purchaser of this equipment Note This warranty supersedes any other form of guarantee that may inadvertently have been enclosed with or attached to the product Dear Customer Thank you for buying SANYO This equipment should give you many years of pleasure and faithful service but in the event that a fault occurs the following notes for you guidance may be helpful 1 PLEASE RETAIN YOUR PURCHASE RECEIPT WHICH WILL BE REQUIRED FOR SERVICE DURING WARRANTY 2 If your Sanyo equipment proves faulty during the period of guarantee take it or send it back to the dealer who originally supplied it together with this guarantee and the proof of purchase We have made arrangements with our approved dealers under which they will carry out inguarantee service repairs on our behalf In this way we hope to reduce to a minimum the amount of time you will be without your equipment 3 If for some reason it is impossible to return the equipment to the original supplier please contact our Service Department at the address below for further advice 4 Should the equipment require servicing after the expiry of the guarantee period take or send it to the original supplier or any other Sanyo dealer He will be pleased to give you a quotation for the repair Service Department Sanyo UK Sales A Division of SANYO Europe Ltd Sanyo
25. he following screen will appear amp Press OK to start this automatically downloads for you The follow ing screen appears Downloading _ Stt C sSSC Software details The following screen appears to show that the upgrade it nearly finished Once this screen disappears the upgrade is complete 11 REMOTE CONTROL Analogue 12 Sound mute To switch the sound from the speakers The sound changes as follows Normal volume gt Half volume gt Mute TV AV switch To switch from TV AV1 AV2 or AV3 mode press repeatedly Nicam Bilingual selector To switch the sound mode as follows NICAM or MONO in the stereo programmes Aor B in the bilingual programmes If the nicam or stereo sound reception is poor in quality you can switch to MONO sound reception by pressing A B button This operates only analogue channel mode Direct programme selector For direct access to programmes using 0 9 numeric buttons in analogue and digital For selection of analogue programme position 10 99 for example 23 first press button and press 2 and 3 numeric buttons Volume up down To adjust the sound level MENU To switch on the screen display menu on off Also see page 12 Cursors To select the sub menu items in the menu display Surround mode selector To select the surround mode ACTIVE MONO or OFF OK To save the setting in the menu also refer to CS button Bass selection To get a
26. ing the top cropping the top and bottom are aah hes s ar aerate e a A but the top and and bottom and bottom smaller and the so please refer to the individual instruction booklet when using bottom are picture height is this remote control to ensure compatibility cropped compressed slightly Some of the keys are used for both the VCR and DVD player The symbols indicated with blue are for the keys to control the E TITLE IN 14 9 DVD player When you use the DVD player with this remote control first press and hold the DVD button and then press your Letterbox Video VCR DVD 2 0 Power Power TITLES REEN gt Play Play ll Pause Pause As zoom 14 9 but As zoom 14 9 but As zoom 14 9 but As zoom 14 9 but m St Sto bottom is bottom is bottom is bottom is op p compressed even compressed even compressed even compressed even aad Fast Cue Next chapter selection more to allow more to allow more to allow more to allow lt lt Rewind Review Previous chapter selection subtitles to be subtitles to be subtitles to be subtitles to be Record press both button at same time seen seen seen seen DVD n a DVD command mode selection OK n a Enter 4 gt AY na Cursor selection E ZOOM 16 9 desired control button each time The correct picture Zooms in slightly Zooms in slightly The black bars top width is maintained cro
27. lf or the bottom half of the page expand to fill the whole screen Teletext Teletext This is a free service to give you lots of varied informa tion such as news sports results weather and travel features Teletext reception If your aerial signal is poor the teletext reception operation may be erratic Teletext brightness level You can change the teletext brightness level Please return to TV mode See Picture menu Text Bright on page 12 Sound volume control In teletext mode sound volume and muting can be controlled However they are not displayed on the screen 15 ANALOGUE AND DIGITAL OPERATION Switching into from standby mode The Standby mode is used for switching the TV set off for short periods of time In standby mode the TV is switched off but is still receiving mains power To turn the TV set into standby mode press the button The red power indicator illuminates more brightly To turn the TV set ON from standby mode press any of the following buttons PA PY or 0 9 buttons set off completely with the Mains ON OFF switch and If you find the power indicator flashing please turn the TV contact our Service desk This warning is a sign to let you know that the power protection function of this TV set is now operating E Auto shut off This TV set will automatically switch into the standby mode 10 minutes after a signal is no longer received The time until
28. ly be useful to a techni cian Some parts are however useful to you If there is an upgrade in software you will need this section to upgrade your TV from time to time 1 Press Menu button to select Main Menu 2 Select Technical Information menu by using A or V buttons Press P to enter 3 Select Signal information by using A or V buttons and press gt to enter This screen cannot be altered but if you have a problem you may need to refer to this screen for some data 4 Press Return or OK button to go back to Technical information screen E Software upgrade 1 Press V button to select Software Upgrade screen Press to enter This looks for any new software upgrades that maybe transmitted at any time 2 Press Return button to go back to Technical information screen 3 Select Product Data by using A or V buttons and press P to enter This is useful to service engineers 4 Press Return button to go back to Technical information screen 5 Press V button to select Reset screen Press to enter If you press Red button to confirm it will return all settings to factory default mode for digital channels To start a scan for all available channels switch the TV set Off and On again and press D A button to select digital When the TV set has been initialised press OK to Save and OK to watch TV picture DIGITAL OPERATION Timer recording This feature is used when you wish to reco
29. n emphasised bass sound ON or OFF Screen mode selector To select the screen mode AUTO NATURAL ZOOM14 9 TITLE IN 14 9 ZOOM 16 9 TITLE IN 16 9 FULL or NORMAL Standby Power on off To switch the TV on and off Also see page 16 Picture mode selector To access a series of picture modes PERSONAL STANDARD ECO and DYNAMIC System selector To select the colour system in the AV mode AUTO PAL NTSC 4 43 or NTSC3 58 Channel mode selection To enter channel number of the station directly This operates in the analogue channel mode only Press once to show current channel number Press a second time to show C enter the channel you require using the 0 9 buttons Press the OK button to memorise Programme up and down To select the next programme number or previous programme number INFO In the analogue mode it displays the programme information such as current programme number stereo status and remaining time if set for about 5 seconds D A selector To switch between analogue and digital channels Teletext TV selector To switch TV MIX and Teletext mode MENU OPERATION Anologue channels Many of your TV s functions are controlled through the menu function MENU Picture Brightness Contrast Colour Sharpness Text bright memory Tint only when NTSC is detected Sound Volume Bass Treble Balance Timer OFF Timer Setting Child lock ON OFF AV2 VID
30. numeric buttons If this is the first time you have selected this function it will be 1 2 3 4 Use lt button to go back and re enter an incorrect digit 5 Select New code by pressing V button and enter your new code eg 4321 6 Select Confirm new code by pressing the V button and re enter the code 4 3 2 1 7 If you are happy with the new code press OK to select A prompt Save new code will appear Press the Red button to confirm If Invalid code appears you have entered the incorrect old code Press RETURN button and try again Press MENU to return to normal picture To activate parental lock 1 Press the MENU button to select Main menu 2 Using A or W buttons select Parental lock Press P to enter 3 Enter your code and press OK to save If wrong code is entered Invalid code will appear and you have to repeat 1 3 again 2 Parental lock is now activated you will now have to enter the code every time before you can enterMain menu unless parental lock is deactivated See page 8 Blocking access to selected channels 1 Press the MENU button to select Main menu 2 Using A or W buttons select Channel List Press to enter Channellist_ 3 Select Lock channels Using A or V buttons Press P to enter X 4 Using A or Y buttons select a Channel you wish to lock 5 Press Yellow button a locked symbol will appear to show it is selected To de select press Yellow button again
31. of the TV set Fit the aerial cable as shown below or as shown opposite when AV equipment is con nected TV rear panel 2 The TV set is prepared for a mains voltage AC220 240V 50Hz A When the TV set is not to be used for an extended period of time it is advisable to disconnect the power cord from the power outlet Satellite For Satellite For all aerial problems please consult your local dealer Important This equipment is fitted with an approved non rewireable UK mains plug To change a fuse in this type of plug proceed as follows 1 Remove the fuse cover and fuse Please refer to individual Instruction Manuals for each piece of equip ment for their connection suggestions 2 Fit a new fuse which should be a BS1362 5Amp A S T A or BSI approved type Step 2 Remote control battery installation 3 Ensure that the fuse cover is correctly refitted If the fuse cover is lost or damaged the plug must NOT be used but replaced with a serviceable plug If the fitted plug is not suitable for your socket outlets it should be cut off and an appropriate plug fitted in its place If the mains plug contains a fuse this should have a rating of 5 Amp ensure the fuse cover is correctly fitted If a plug without a fuse is used the fuse at the distribution board should not be greater than 5 Amp Note The severed plug must
32. osition is not skipped when A or V button is pressed To select Skip Press V and press lt or gt to set to ON or OFF 2 You can still view a programme position that has been skipped by using the numeric buttons to select the programme position directly 6 Select memory by pressing the V Press P a tick indicates the chan nel is now stored SEMI W CH 34 P 04 Skip OFF D Press MENU button repeatedly to exit and return to normal TV picture omemory E Swap Use this channel swapping feature to swap the channels between two stored programme positions This feature is particularly useful after automatic tuning You have to choose a programme that you wish to swap on the TV set eg Swap programme position 4 and 12 1 Select programme position 4 2 Press the MENU button 3 Select Preset by pressing A or V buttons Follow the diagram below t t aE b n l om Swap Swap 12 7 v Setting Fine Tuning Fine Tuning Swap E Preset 4 Enter the programme number 12 press and the channels are swapped iy E Fine tuning 1 Press the MENU button 2 Select Preset by pressing A or V buttons Follow the diagram below Press gt to enter t 4 3 Press A or V to select Fine Tuning press to fine tune channels Picture Sound Timer Tuning Swap Fine Tuning S Pre
33. pping the top cropping the top and bottom are but the top and and bottom and bottom smaller and the bottom are picture height is cropped compressed slightly 17 TV SPECIFICATIONS TV specifications Common specification Power source Television system Colour system AC 220 240V 50Hz System PAL NTSC4 43 PAL NTSC4 43 NTSC3 58 in AV mode Channel coverage UHF 21 69 Aerial input impedance 75 ohm AV terminal AV1 CENELEC Standard Input Composite video RGB and audio L R Output TV output with composite video and audio L R AV2 CENELEC Standard Input Composite video RGB S VHS and audio L R Output Monitor output with composite video and audio L R Front AV terminal AV3 RCA jacks Input Composite video and audio L R Heaphone socket Mini Jack CE28DFN2 B CE32DFN2 B Sound output Continuous 2x 10W 2 x 10W Picture tubes inches 28 32 Dimensions WxHxD mm 786 x 519 x 504 880 x 575 x 549 Weight kg 34 5 46 3 E NO PICTURE NO SOUND Check if TV is plugged in Try a different channel if OK probably station trouble E POOR PICTURE SOUND OK Adjust BRIGHTNESS control Adjust FINE TUNING control Check aerial connections E NO COLOUR PICTURE OK Adjust COLOUR control Adjust FINE TUNING control Is the programme in colour E WEAK PICTURE Check aerial connections on back of set Check aerial for broken wires Re orient aerial The following faults are not
34. ratio 16 9 14 9 4 3 16 9 Letterbox Video etc If WSS is not being received and you are not happy with your picture this TV provides you the option to change it with the following options The whole screen The whole screen The whole screen The black bars top Press the WIDE button repeatedly to select your desired setting is filled stetching is filed stetching _ is filled with the aha botom Ara the width the height slightly corrrect picture present and the at the edges ratio height is compressed E NORMAL 16 9 Letterbox Video Stretches the The height is The picture fills the The black bars top picture horizontally expanded to fill the screen and is and bottom remain to fill the screen whole screen proportionally and the height is The picture is more correct compressed to fit stretched at the the picture area edges The correct ratio is maintained with black bars on the left and right Black bars left and Black bars left and Black bars left right picture height right picture height right top and is stretched is stretched bottom E ZOOM 14 9 4 3 14 9 16 9 Letterbox Video VCR DVD controls This remote control transmitter has been designed to be used in conjunction with selected SANYO VCR s and DVD players Some The correct picture Zooms in slightly Zooms in slightly The black bars top i H width is maintained cropp
35. rd a digital channel on your VCR In order to record digital channels you cannot watch another digital channel when recording Digital channels are recorded using AV2 Timer recording will switch your TV set to the digital channel at the preset time until the finish time is reached Whilst timer recording is running you can switch to Analogue TV You can also switch your TV into Standby mode the timer recording will switch your TV on and off back into Standby when finished 2 f you want to switch to another digital channel you must first cancel recording by pressing the Return button 2 f channel has been locked Parental lock and you have set timer record for locked channel it will not record You have to deactivate parental lock first 1 Press Menu button to select Main Menu 2 Select Timer recording menu by using A or V buttons Press gt to enter 3 Highlight a row and press OK button Set events screen appears 4 Select channel by pressing lt or gt buttons and rotate through all available channels 5 Press W button to select and highlight yellow Wake up day box Enter your day month and year by using numeric buttons 0 9 and using lt or P buttons to move left and right 6 Press W button to select and highlight yellow Wake up time box Enter your time by using numeric buttons 0 9 and using lt or gt buttons to move left and right 7 Press V button to select and highlight yellow Fini
36. se wait Next digital Set up is starting Y Press OK to save Press OK to Watch TV Now the installation is complete After Plug amp Play Digital channels are stored in the programme posi tions shown in the All channel table Analogue channels will be automatically sorted as follows Programme position 1 BBC1 Programme position 2 BBC2 Programme position 3 ITV Programme position 4 CH4 or S4C Programme position 5 CH5 Programme position 6 ITV2 Programme position 7 channels in order found 2 f any other channels are available in your reception area the remaining channels will be stored from programme position 7 in sequence as found 2 If you move to another city or cable is installed please follow the description TUNING on page 13 2 This procedure only appears the first time you switch on TV front controls Terminals Press PA and PY increases or decreases the programme position 2 OO OO a VPA Press or A increases or decreases the sound volume Mains ON OFF E Front terminals Headphone Z Video Audio input Jacks al O8 r af DQ L S R D I a From Camcorder amp 4 Camcorder or video game 2 P equipment oer Tan l a SS 2 To select the AV3 mode press the TV E button repeatedly o 2 When the hea
37. set The tuning will be stored when you exit the menu TELETEXT OPERATION Anologue channels Standby Power on off To switch the TV on and off Reveal switch This reveals hidden items on the teletext page eg a hidden answer to a quiz question Direct access to a page All the numeric buttons can be used to select a page number directly If you need page 301 press 3 then 0 then 1 Sub page access Some text pages are made up of several sub pages which rotate automatically if you wish to view P4 of 8 press the sub page button will appear Enter 0004 Direct access to subject headings Coloured boxes are displayed at the bottom of the screen The 4 coloured buttons give access to the corresponding subjects or pages Page up and down To select the next page number or previous programme number MENU Index page selector To call up the Index pages eg P100 Inco D A O TXT TV Teletext TV selector To switch TV MIX and Teletext mode Stop This stops the sub pages from changing The word STOP will appear instead of the page number Up down page access Press the button to select the next page or previous page number Cancel To view the TV picture in the teletext mode while waiting for sub page to change or page to update Note the page number will appear if the page is updated Size switch This will make either the top ha
38. sh time box Enter your time by using numeric buttons 0 9 and using lt 4 or gt buttons to move left and right the time you wish to finish 8 Press W button to select and highlight yellow Repeat box Press lt or P buttons to enter No repeat daily or weekly This would be a useful feature if you have a favourite programme that you dont want to miss and it is shown on a daily or weekly schedule 9 Press OK to save settings you can repeat again or press RETURN button to go back to Main menu Press MENU to exit 10 Once you have set the timer recording 5 minutes before the selected time the following screen appears You can either press the Red button and delete press the Green button and the channel will change at the due time press the Yellow button to change to the channel now or press the Blue button to cancel settings 2 If you want to switch to another digital channel you must first cancel recording by pressing the Return button Timer menu E Off timer setting The Off timer will switch the TV set into the standby mode when the selected time period has elapsed Press the MENU button to select main menu Press A or V buttons to select OFF Timer Press gt to enter OFF Timer menu t gt OFF Timer_ 00 30 i Ap gt OFF Timer_ 00 30 i Not set 4 Set Press to highlight time period yellow Press A or Y buttons the time changes in 30 minute steps Th
39. t not limited to warranties of satisfactory quality fitness for purpose and non infringement save to the extent that the same are not capable of exclusion at law 2 In no circumstances will SANYO be liable for any direct indirect consequential or incidental damage including loss of profits busi ness interruption loss of data or the cost of procurement of substi tute goods technology or services arising out of the use or the inablity to use the Software save to the extent that such liability is not capable of exclusion at law General 1 This End User Licence will be governed by laws of England and the User may only bring claims in the English Courts and SANYO shall be entitled to bring a claim in the courts of any jurisdiction 2 The above terms and conditions supersede any prior agreement oral or written between you and SANYO relating to the Software CAUTION Please read and retain for your safety This unit has been engineered and manufactured to assure your personal safety But improper use can result in potential electric shock or fire hazards In order not to defeat the safeguards incorporated in this receiver observe the following basic rules for its installation use and servicing Installation Do not allow anything to rest on the power cord Do not locate this television receiver where the cord will be damaged by people walk ing on it Do not overload wall outlets and extension cords as
Download Pdf Manuals
Related Search