Sanus Systems NF203 User's Manual
Contents
1. SA NUS 5S YSTEMS THE UNION OF FORM AND FUNCTION Assembly Instructions for Natural Furniture Model NF203 NF213 NF V49 Thank you for choosing the Natural Furniture line from Sanus Systems If you have any questions regarding this or any other Sanus Systems product please contact us at 800 359 5520 or visit us at www sanus com Our customer service representatives can assist you quickly with any issues regarding assembly or missing parts Check carefully to make sure none of the parts are missing or defective Never use defective parts Replacement parts for products purchased from an authorized dealer will be shipped directly to you Please call Sanus Systems before returning products to retail stores Supplied Parts List ieee 12 Steel Cross Tube b 8 Three Hole Plate c 1 Front Frame a 2 Glass Shelf d 2 Rear Support e 2 Plastic Wire Cover f Th 4 Wire Strap h 1 Top Glass Shelf g Sanus Systems 2221 Hwy 36 West St Paul MN 55113 800 359 5520 www sanus com 8 31 04 Supplied Hardware List 12 Allen Bolt i 4 Washer j O l 12 Decorative Face Bolt k 8 Glass Protector 1 1 Allen Key m Step 1 Attach the Cross Tubes to the Front Frame Position the Front Frame a like it is pictured in Diagram 1 Next slide each Decorative Face Bolt k through the Front Frame a Three Hole Plate c and into a Steel Cross Tube b Repeat process until all 12 Steel Cross2. Tubes are fastened to the Front Frame See the Detailed View of Diagram 1 for assistance Tighten the Steel Cross Tubes firmly by hand Diagram 1 Detailed View Step 2 Attach the Rear Supports Thread an Allen Bolt i through a Washer j through the middle hole in a Rear Support e through the middle hole in a Three Hole Plate c and into the middle Steel Cross Tube b See Diagram 2 for assistance Repeat the process until all 4 middle Allen Bolts the 4 accompanying Washers and the Rear Supports are attached to the middle Steel Cross Tubes Next thread an Allen Bolt through each hole of the Wire Strap h the Rear Support each outer hole of the Three Hole Plate and into each outer Steel Cross Tube See the Detailed View of Diagram 2 for assistance Proceed to tighten all 12 Allen Bolts with the Allen Key m Diagram 2 Detailed View Note The Rear Supports should be positioned so the set of three holes closest to the edge is at the top and so the horizontal slots face the front frame Step 3 Add Glass Shelves Install the Glass Shelves d so that the back of each shelf fits into the slot in the Rear Support e and the front of the shelf sits down into the groove in the Front Frame a See Diagram 3 for assistance Diagram 3 Step 4 Add Top Glass Shelf Place 4 Glass Protectors 1 evenly along the top of the Front Frame a Next Add 2 Glass protectors to the top of each Rear Support e Proceed
3. to place the Top Glass Shelf g onto the Glass Protectors See Diagram 4 for assistance Diagram 4 Step 5 Add Plastic Wire Covers To add the Plastic Wire Covers f insert one edge of the Wire Cover into one of the slots in the Rear Support e as shown in the Top View of Diagram 5 Proceed to insert the other edge of the Wire Cover into the adjacent slot in the rear support Repeat the process for the other Plastic Wire Cover This completes the assembly of the NFV49 Note The glass in Diagram 5 is shown as a cutaway view to provide greater detail of how the Wire Cover attaches to the rear sup port Top View Diagram 5 Sanus Systems 2221 Hwy 36 West St Paul MN 55113 800 359 5520 www sanus com 8 31 04
Download Pdf Manuals
Related Search