Home

Samsung UA46B8000 User's Manual

1. HDMI 1 3 Cable Tes sup 1 3 Cable HDMI 1 3 Cable 1 Connect the HDMI IN 1 DVI 2 3 or 4 jack on the TV and the HDMI OUT jack of the corresponding Anynet device using an HDMI cable 2 Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet device using an HDMI cable E Connect only one Home Theatre You can connect an Anynett device using the HDMI 1 3 cable Some HDMI cables may not support Anynett functions Anynett works when the AV device supporting Anynett is in the Standby or On status Anynett supports up to 12 AV devices in total Note that you can connect up to 3 devices of the same type English 50 B Setting Up Anynett a Press the TOOLS button to display the Tools menu You can also display Anynett menu by selecting Tools Anynett HDMI CEC Media Play USB amp DLNA Anynet HDMI CEC Content Library uoljeaddy Internet TV E Setu p Home Network Centre Anynett HDMI CEC Off On To use the Anynett Function Anynett HDMI CEC must be set to On When the Anynett HDMI CEC function is disabled all the Anynet related operations K ec Set are deactivated etup Anynet HDMI CEC Auto Turn Off Auto Turn Off No Yes Setting an Anynet Device to turn Off automatically when the TV is turned Off The active sou
2. E hold Used to hold the display on a given page if the selected page is linked with several secondary pages which follow on automatically To resume press it again cancel Used to display the broadcast when searching for a page E page up Used to display the next Teletext page page down Used to display the previous Teletext page T cH UST a S You can change Teletext pages by pressing the numeric buttons on the remote control English 64 The Teletext pages are organized according to six categories Contents Selected page number Broadcasting channel identity Current page number or search indications Date and time Text Status information FASTEXT information Part n m G 00 gt Teletext information is often divided between several pages displayed in sequence which can be accessed by Entering the page number Selecting a title in a list Selecting a coloured heading FASTEXT system Teletext level supported by the TV is version 2 5 which is capable of displaying additional graphics or text Depending upon the transmission blank side panels can occur when displaying Teletext In these cases additional graphics or text is not transmitted Older TV s which do not support version 2 5 are not capable of displaying any additional graphics or text regardless of the Teletext transmission Press the TV button to exit from the Teletext displ
3. 3 Press the lt or gt button to select an icon Gallery Cooking Game Children Wellness Others Content Management then press the ENTER L button Using the Remote Control Button in Content Library Menu Button Operations AlV lt gt Move the cursor and select an item ENTER L Select the currently selected item RETURN Return to the previous menu EXIT Stop the current function and return to the Content Library main menu NPV Stop Content Library mode and Returns to TV mode Colour button Keys that provide functions are described on the corresponding page MUTE You can control the volume of the played content CONTENTS LIBRARY CONTAINS TEXT GRAPHICS IMAGES MULTIMEDIA AND OTHER MATERIALS FOR INFORMATIONAL AND PROMOTIONAL PURPOSES ONLY MATERIALS IN CONTENTS LIBRARY HAS BEEN MODIFIED AND KEEPS BEING REVISED AND UPDATED THE MATERIALS IN THE CONTENTS LIBRARY MAY NOT BE SUITABLE FOR ALL AUDIENCES INFORMATION IN THE CONTENTS LIBRARY IS PROVIDED AS IS ALTHOUGH THE INFORMATION PROVIDED TO YOU IN THE CONTENTS LIBRARY IS OBTAINED OR COMPLIED FROM SOURCES WE BELIEVE TO BE RELIABLE SAMSUNG CANNOT AND DOES NOT GUARANTEE THE ACCURACY VALIDITY TIMELINESS OR COMPLETENESS OF ANY INFORMATION OR DATA MADE AVAILABLE TO YOU FOR ANY PARTICULAR PURPOSE UNDER NO CIRCUMSTANCES INCLUDING NEGLIGENCE SHALL SAMSUNG BE HELD LIABLE WHETHER IN CONTRACT OR TORT FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAG
4. Choose Select a network the device list is displayed Select the device you want in the Device list If security key was applied input the security key again If network doesn t operate normally please check the Network Name SSID and Security Key again If the Security Key is incorrect it may be the reason for the malfunction We M gt Wireless Network Setup Auto If you want to connect AP AP should support DHCP Only devices which support Ad hoc mode Wireless Network Setup can be connected without DHCP Internet Protocol Setup Auto 1 Set Network Type to Wireless en 2 Select Wireless Network Setup 3 Set Internet Protocol Setup to Auto The Internet Protocol is set automatically Select a network through Select a network sli Sarai Select Network Test to check the network connectivity Wireless Network Setup Manual 1 2 3 4 n Set Network Type to Wireless Wireless Network Setup Select Wireless Network Setup Internet Protocol Setup Manual Network Test Set Internet Protocol Setup to Manual Select a network Set up IP Address Subnet Mask Gateway and DNS Server ees Subnet Mask Press the number buttons on the remote control when you set the Network manually Gateway DNS Server Select a network through Select a network Move CC Select 5S Return Select Network Test to check the network connectivity English 27 INPUT SUPPORT Input Menu Q Source List Use to select TV
5. Exit from the Teletext display POWER ty ONOFF 2 store Om Used to store the Teletext pages size EB L2 3 Press to display the double size letters in the upper half of the screen For lower half 4 5 Le of the screen press it again To display normal screen press it once again 9 Colour buttons red green yellow blue If the FASTEXT system is used by a broadcasting company the different topics i sa E covered on a Teletext page are colour coded and can be selected by pressing the coloured buttons Press one of them corresponding to the required The page is displayed with other coloured information that can be selected in the same way To display the previous or next page press the corresponding coloured button 5 mode Press to select the Teletext mode LIST FLOF If you press it in the LIST mode it switches into the List save mode In the List save mode you can save Teletext page into list using the o store button Q GE teletext on mix dine Press to activate Teletext mode after selecting the channel providing the Teletext service Press it twice to overlap the Teletext with the current broadcasting screen cal Q reveal Used to display the hidden text answers to quiz games for example To display normal screen press it again 9 sub page Used to display the available sub page 9 index Used to display the index contents page at any time while you are viewing Teletext
6. KE Play the file at double speed This function may not be supported depending on the codec Playing the movie group 1 2 3 4 Press the A button to move to the Sort key Section Press the lt or gt button to select a sorting standard Press the Y or ENTER La button to move to the Group List Section Press the gt Play button Only the files of the selected group will start playing Alternatively Select a Sort key and then in the File List Section select the files contained in the desired group To move to the previous next group press the lt lt REW or gt gt FF button Press the TOOLS button Press the A or Y button to select Play Current Group then press the ENTER C4 button E The movie files in the sorting group including the selected file are played Playing the selected movie files 1 2 3 Press the Y button to select the File List Section Press the lt or gt button to select the desired movie file Press the Yellow button The Y mark appears to the left of the selected movie file To deselect all selected files press the TOOLS button and select Deselect All Repeat the above operation to select multiple movie files Press the gt Play ENTERC4 button Only the selected file is played Playing movie continuously Resume Play If you exit the playing movie function the movie can be played later from the point where it was stopped 1 2 3 Select the movie file
7. When using a stand or wall mount use parts provided by Samsung Electronics only e If you use parts provided by another manufacturer it may result in a problem with the product or an injury due to the product falling If you use parts provided by another manufacturer it may result in a problem with the product or fire due to an increase in the internal temperature of the product due to poor ventilation The appearance may differ depending on the product When installing the product with a stand When installing the product with a wall mount Preparing before installing Wall Mount To install a wall mount from another manufacturer use the Holder Ring oo a L English 68 Securing the TV to the Wall not hang over or destabilize the TV doing so may cause the TV to tip over causing serious injuries or death Follow all safety precautions provided on the included Safety Flyer For added stability install the anti fall device for safety purposes as follows T Caution Pulling pushing or climbing on the TV may cause the TV to fall In particular ensure your children do To avoid the TV from falling 1 4 Put the screws into the clamps and firmly fasten them onto the wall Confirm that the screws have been firmly installed onto the wall You may need additional material such as an anchor depending on the type of wall Since the necessary clamps screws and string are not
8. Ly I x LZ Server Media Play PC Se Set Security Policy ae My Computer Shared Folder My Comy Delete Item c jo C Documents and Settings gansa O Shi SN ian WDocuments and Setn TE mma E EHS Le aroldert a ee C Documents and Settin Fd 1921681 144 SAMSUNG TV Accepted Deny tin Folder2 Poses tk Sie LISTE Gp 1921681146 SAMSUNG TV Denied Accept Folder3 Or Folder4 Or Folders DF oK Cancel gt lt gt English 48 Setting the Access Permission To enable the TV to find your PC the TV must be set to Set Device Policy in the Access Permission Settings window In addition the PC server and the TV must be on the same subnet e Method Select the Share menu and select Set Device Policy Rejected items are represented in gray You can change the access permissions by using the Allow Accept Deny button To delete an item select the item and select Delete Item UY Server Server You can run or stop using your PC as a server Run DLNA Digital Media Server when Windows Starts You can determine whether to start the PC server automatically when Windows starts Change server name You can rename the PC server Enter a new name and click OK The new name will appear at the top right of the window and will appear on the TV U Help Version The Programme version information message box appears El Using the DLNA Function Using the DLNA Menu DLNA Digital Living Network Alliance enables c
9. button to search devices Press the EXIT button to exit You can record the source streams by selecting Recording device_name Pressing the Le button will record whatever you are currently watching If you are watching video from another device the video from the device is recorded Before recording check whether the antenna jack is properly connected to the recording device To properly connect an antenna to a recording device refer to the recording device s users manual i Listening through a Receiver Home theatre Fa You can listen to sound through a receiver instead of the TV speaker Aner 1 Press the TOOLS button Press the ENTER C button to select Anynet HDMI CEC bars 2 Press the A or Y button to select Recording Immediately and press the ENTER C M button Recording begins DVDR MENU Press the A or Y button to select Receiver Press the lt or gt button to select On or Off 3 Press the EXIT button to exit a If your receiver supports audio only it may not appear in the device list If there is a power interruption to the TV when the Receiver is set to On by disconnecting the power cord or a power failure the Speaker Select may be set to External Speaker when you turn the TV on again Move Enter 5D Return English 52 Problem Anynett does not work want to start Anynett want to exit Anynett The message Connecting to Anynett device appears on the screen The A
10. further restrictions within the meaning of section 10 If the Program as you received it or any part of it contains a notice stating that it is governed by this License along with a term that is a further restriction you may remove that term If a license document contains a further restriction but permits relicensing or conveying under this License you may add to a covered work material governed by the terms of that license document provided that the further restriction does not survive such relicensing or conveying If you add terms to a covered work in accord with this section you must place in the relevant source files a statement of the additional terms that apply to those files or a notice indicating where to find the applicable terms Additional terms permissive or non permissive may be stated in the form of a separately written license or stated as exceptions the above requirements apply either way Termination You may not propagate or modify a covered work except as expressly provided under this License Any attempt otherwise to propagate or modify it is void and will automatically terminate your rights under this License including any patent licenses granted under the third paragraph of section 11 However if you cease all violation of this License then your license from a particular copyright holder is reinstated a provisionally unless and until the copyright holder explicitly and finally terminates your license
11. 0 POWER Off MUTE gt 8 gt 2 4 POWER On Q Light Effect Off In Standby Watching TV Always You can turn on off the LED on the front of TV according to the situation Use it for saving power or when the LED dazzles your eyes e Off LED is always off e In Standby Turns the LED on in standby mode e In Watching TV Turns the LED on while watching TV e Always LED is always on Set the Light Effect to Off to reduce the power consumption English 20 Q Melody Off Low Medium High A melody sound can be set to come on when the TV is powered On or Off The Melody does not play When no sound is output from the TV because the MUTE button has been pressed When no sound is output from the TV because the volume has been reduced to minimum with the VOL button When the TV is turned off by Sleep Timer function Q Energy Saving Off Low Medium High Auto This feature adjusts the brightness of the TV in order to reduce power consumption When watching TV at night set the Energy Saving mode option to High to reduce eye fatigue as well as power consumption a Press the TOOLS button to display the Tools menu You can also set the Energy Saving option by selecting Tools Energy Saving L PIP For detailed procedures on setting up options refer to page 16 L Setting the Time LY Clock Plug amp Play Language English Setting the clock is necessary in order to use th
12. Exits the DLNA application If you select Exit without applying the changes after changing the shared status a message will appear asking if you want to apply the changed settings to the PC Select Yes to apply the changes and exit the application a SAMSUNG PC Share Manager ae File Share Server Help tv X C3 ka Server Media Play PC Se My Computer Shared Folder as Je E ame q Folder1 aree Apply the changes on PC to the server Folders Folders Folders English 47 Q Share Sharing a Folder You can share a folder from your PC to the TV The maximum number of folders that can be shared is 32 Your PC will operate as a server to the TV e Method 1 Select a folder in My Computer select the Share menu and then select the Share Folder sub menu e Method 2 Select a folder in My Computer right click over the selected folder and then select Share Folder from the popup menu Method 3 Locate the mouse pointer over a folder in the My Computer folder list in the left pane and drag amp drop the folder into the Shared Folders pane If a message appears asking you to confirm the shared folder select Yes lt Method 1 gt 82 SAMSUNG PC Share Manager aa E SAMSUNG PC Share Manager ma IE SAMSUNG FC Share Manager a a File el File Share Server Help File Share Server Help Share Folder g m x EA re Server Media Play PC Se 4 x
13. IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 16 Limitation of Liability INNO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MODIFIES AND OR CONVEYS THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES ORA FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 17 Interpretation of Sections 15 and 16 If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee S END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program and you want it to be of the greatest possible use to the
14. List Green Zoom Enlarges or shrinks a channel number Yellow Select Selects multiple channel lists You can perform the add delete or add to favourites delete from favourites function for multiple channels at the same time Select the required channels and press the Yellow button to set all the selected channels at the same time The Y mark appears to the left of the selected channels TOOLS Tools Displays the Delete or Add Add to Favourite or Delete from Favourite Lock or Unlock Timer Viewing Edit Channel Name Sort Select All or Deselect All Auto Store menu The Options menus may differ depending on the situation Channel Status Display Icons lt S A channel selected by pressing the yellow button l w Achannel set as a Favourite C4 A programme currently being broadcast m A locked channel Areserved programme Channel List Option Menu in All Channels Added Channels Favourites Press the TOOLS button to use the option menu Option menu items may differ depending on the channel status Add Delete You can delete or add a channel to display the channels you want All deleted channels will be shown on All Channels menu A gray coloured channel indicates the channel has been deleted The Add menu only appears for deleted channels You can also delete a channel to the Added Channels or Favourites menu in the same manner w Ne EC Add to Favouri
15. List Section using the Up and Down buttons After selecting a section press the lt or gt buttons to select an item English 31 Current Sort key This field shows the current standard for sorting files Press the lt or gt button to change the standard for sorting files View Groups Shows the detailed groups of the files sorted according to the selected Sort key The sort group where the currently selected file is contained is highlighted Currently selected file The selected file is the file you can now control Photo and movie files are displayed as thumbnail images Current Device Shows the currently selected device name Press the Red button to select a device e Red Device button Selects a connected device O e Help Items e Green Favourites Settings button Changes the Favourites Settings for the selected file Press this button repeatedly until the desired value appears e Yellow Select button Selects file from the file list Selected files are marked with a symbol vy Press the Yellow button again to cancel a file selection e TOOLS Tools button Displays the option menus The option menu changes according to the current status Item Selection Information Shows the number of files that are selected by pressing the Yellow button Fi Sorting the Photo List You can sort photos in the Photo List by a particular standard 1 Press the MEDIA P button 2 Press the lt or K button to selec
16. On Cy When all music files in the folder or the selected file are played once Repeat Mode is Off Playing the music group 1 2 3 4 Press the A button to move to the Sort key Section Press the lt or gt button to select a sorting standard Press the Y or ENTER La button to move to the Group List Section Press the gt Play button The files of the selected group will start playing Alternatively Select a sort key and then in the File List Section select the files contained in the desired group To move to the previous next group press the lt lt REW or gt gt FF button Press the TOOLS button Press the A or Y button to select Play Current Group then press the ENTER C4 button The music files in the sorting group including the selected file are played Playing the selected music files 1 2 3 Press the Y button to select the File List Section Press the lt or gt button to select the desired music file Press the Yellow button The Y appears to the left of the selected music file To deselect all selected files press the TOOLS button and select Deselect All Repeat the above operation to select multiple music files Press the gt Play ENTER C4 button The selected files will be played English 38 Music Play Option Menu Music Play Option Menu LJ Repeat Mode On Off a Picture Setting You can play music files repeatedly Sound Setting Information Remo
17. PC Share Manager ma IE SAMSUNG PC Share Manager ma IEA SAMSUNG FC Share Manager aa g am i Server Media Play PC Se Z Z og SA ZZ U G E Heir My Comp Shared Folder My Computer Shared Folder My Computer Shared Folder Hitmen JE C WDocuments and Settmoswastzoaw Toa E share Je epee Sis S 7 and Seth fone si S E mont Tare gt E Folder2 Folder2 ert nelar Folder3 Folder3 Folder4 Folder4 Folders Folders Folders SAMSUNG PC Share Manager QD Disable share option for the selected item Applying the Current Settings Perform this when synchronization is necessary due to a new shared folder or cancelling a shared folder The Set Changed State menu applies changes to shared folders to the data saved with the PC share programme Since applying changes to the internal data is a time consuming process this function enables users to apply changes to the data only when required Until the Set Changed State menu is selected the changed state of the shared folder is not applied to the server Changes to the shared folders are not applied to your PC until you select the Set Changed State menu e Method 1 Select the Share menu and select the Refresh DB sub menu S g e Method 2 Click the Set Changed State icon E SAMSUNG PC Share Manager IE SAMSUNG PC Share Manager aa File Share Server Help File Share Server Help vi Ux C3 4a Sever Media Play PC Se
18. Storage Class Bulk Only Transport device Examples of MSC are Thumb drives and Flash Card Readers E Playing a game using an external USB memory device will allow you to save your game depending on the game Take care as removing the USB memory device while saving data to the USB memory device may cause the data to be lost E Downloading New Contents New content other than the built in content will be provided via the Samsung com website free of charge When you download the paid contents you need UDN number to download contents Check the UDN number before downloading a new content item e Downloading Content 1 gt he ONO Setup Visit the www samsung com website Select a content item in the Contents Download page Download the contents onto the USB memory device Go to Content Library main menu by pressing CONTENT button or choosing Content Library Menu gt Application Content Library Plug the USB memory into USB port on the side of the TV You can see the content sub item which you downloaded Select a content item and press the enter button You can play the selected content item or copy it to the TV memory e Screen Saver Run Time Select to set the waiting time before the screen saver appears e Save UDN Saves the UDN number to a USB device An NTFS format USB storage device does not support saving UDN We recommend using a FAT format USB storage device English 56 ea SOUR E This function may no
19. This is free software and you are welcome to redistribute it under certain conditions type show C for details The hypothetical commands show w and show c should show the appropriate parts of the General Public License Of course your program s commands might be different for a GUI interface you would use an about box You should also get your employer if you work as a programmer or school if any to sign a copyright disclaimer for the program if necessary For more information on this and how to apply and follow the GNU GPL see lt http www gnu org licenses gt The GNU General Public License does not permit incorporating your program into proprietary programs If your program is a subroutine library you may consider it more useful to permit linking proprietary applications with the library If this is what you want to do use the GNU Lesser General Public License instead of this License But first please read lt http www gnu org philosophy why not lgpl html gt E GNU Lesser General Public License LGPL Version 3 29 June 2007 Copyright C 2007 Free Software Foundation Inc lt http fsf org gt Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The GNU General Public License is a free copyleft license for software and other kinds of works The licenses for most software and other practical works are designed to take aw
20. abnormal colour when DVD Blu ray player Cable Boxes Satellite receivers supporting HDMI versions older than 1 3 are connected When connecting an older HDMI cable and there is no sound connect the HDMI cable to the HDMI IN 1 DVI jack and the audio cables to the PC DVI AUDIO IN jacks on the back of the TV If this happens contact the company that provided the DVD Blu ray player Cable Box Satellite receiver Set Top Box to confirm the HDMI version then request an upgrade E Use the HDMI IN 1 DVI jack for DVI connection to an external device Use a DVI to HDMI cable or DVI HDMI adapter DVI to HDMI for video connection and the PC DVI AUDIO IN jacks for audio When using an HDMI DVI cable connection you must use the HDMI IN 1 DVI jack E HDMI cables that are not 1 3 may cause annoying flicker or no screen display USB1 HDD USB2 Connector for software upgrades and Media Play etc For USB HDD use the USB1 HDD port You can connect to Samsung s network wirelessly using the Samsung Wireless LAN Adapter Sold separately Wireless LAN Adapter will be sold after certification in below countries Algeria Saudi Arabia Turkey Arab Emirate South Africa Iran Israel India Morocco Senegal Ghana Kenya Egypt Lebanon Tunisia Libya AUDIO OUT Connect RCA audio cables to AUDIO OUT on the rear of your set and the other ends to corresponding audio in connectors on the Amplifier or DVD Home Theatre SER
21. acne tere rceeee on m PRIAVINOMUSIC musts E T emcee E ter E E 38 eMusic Play Option Me E eee 39 E Soming the Movie ST cereus ot ee ees eee 39 Tiron Viren Lisi ar GTGT 40 Bm laving RE MOV e ST 40 m Movie lay Option MenU zt a E oes 43 E Using the setup Menura a a E rete peer 44 Q Symbol Z A Note One Touch Button TOOLS Button MEDIA PLAY DLNA m Setting the DENA NetWork serrate 45 seline wo DUANIN TE 46 m Using the DENA ADpIICAU ON oroaaraar77010100000006000000000000000500 47 mW Singithe DENA RUNCIONiseaeam tec E eset 49 ANYNET m Connecting Anynet Devices sese 50 Mm Setting tp Anynet T Si m Switching between Anynett Devices 51 RO e A neg eee err E earn eae 52 m Listening through a Receiver Home heater eee eee 52 SHei CTii Gire T A 53 CONTENT LIBRARY me Using the E e E E se caren 54 m Using the TV Memory Contents sese eee eee eee eee eee eee 35 m Using the Content Management eee eee eee eee eee eee eee 56 INTERNET TV m Getting Started with Internet TV cccccssssssssssssssessssssseessees SY m Setting Up Intenmet T 57 m Using the Internet TV ServiCe cccccscecssessssssserssssessssesssseeeseees 58 m Troubleshooting for internet TV cccsccssssescsssesssessssssssserssees 59 MII VSL SIG T 59 HOME NETWORK CENTRE mi ome Network Gn LTG 60 m Setting Up the Home Network Centre eee eee eee eee ee eee 61 me Usingithe Message ep TGT 62 miWsingtine Median GUMCUOM te vr cence
22. appears e lf you select the OK button the call arrival alarm is confirmed and the alarm window is closed e Ifyou select the Cancel button the alarm window appears up to three times at 5 minute intervals Schedule Alarm While you are watching TV the alarm window appears to display the registered schedule e lf you select the OK button you can view the contents of the schedule registered on the mobile phone e If you select the Cancel button the alarm window appears up to three times at 5 minute intervals You can configure the viewing settings for the schedule contents on the mobile phone For the procedures refer to the mobile phone manual Some special characters may be displayed as blank or broken characters gS aS English 62 fa Music 4 Movie husband SMS New message received Do you want to view the details 851 86MB 993 02MB Free G Setup S Return SMS New message received Do you want to view the details gt lt husband Call You have a phone call Mom 011 298 2030 husband Scheduled event You have a schedule Do you want to view the details B Using the Media Function An alarm window appears informing the user that the media contents videos photos music sent from the mobile phone will be displayed on the TV The contents are played automatically 3 seconds after the alarm window appears If you press the RETURN or EXI
23. c gt symbol are trademarks of SRS Labs Inc TruSurround HD technology is incorporated under license from SRS Labs Inc pe DOLBY Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of DIGITAL Dolby Laboratories DivX Certified to play DivX video including premium content Q Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen e Do not display still image and partially still on the LED panel for more than 2 hours as it can cause screen image retention This image retention is also known as screen burn To avoid such image retention reduce the degree of brightness and contrast of the screen when displaying a still image 6 Watching the LED TV in 4 3 format for a long period of time may leave traces of borders displayed on the Lo left right and centre of the screen caused by the difference of light emission on the screen Playing a DVD or a a game console may cause a similar effect to the screen Damages caused by the above effect are not covered by the Warranty e Displaying still images from Video games and PC for longer than a certain period of time may produce partial after images To prevent this effect reduce the brightness and contrast when displaying still images 2009 Samsung Electronics Co Ltd All rights reserved CONTENTS SETTING UP YOUR TV m Viewing the Control Panel 2 a so eesseacrseeees 2 REG S
24. does not include a requirement to continue to provide support service warranty or updates for a work that has been modified or installed by the recipient or for the User Product in which it has been modified or installed Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network Corresponding Source conveyed and Installation Information provided in accord with this section must be in a format that is publicly documented and with an implementation available to the public in source code form and must require no special password or key for unpacking reading or copying Additional Terms Additional permissions are terms that supplement the terms of this License by making exceptions from one or more of its conditions Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License to the extent that they are valid under applicable law If additional permissions apply only to part of the Program that part may be used separately under those permissions but the entire Program remains governed by this License without regard to the additional permissions 10 When you convey a copy of a covered work you may at your option remove any additional permissions from that copy or from any part of it Additional permissions may be written to requir
25. information of photo files during a SlideShow using the same procedures Press the INFO button to viewing the information ees Remove Safely Co SIZE You can remove the device safely from the TV English 33 Viewing a Photo or Slide Show Viewing a Slide Show 1 Press the Y button to select the File List Section 2 Press the TOOLS button Copy 3 Press the A or Y button to select Slide Show then press the ENTER 4 button fs T E 4 s All files in the File List Section will be used for the Slide Show ities ean G During the slide show files are displayed in order from the currently shown file 580x765 2009 01 02 5 15 G The Slide Show progresses in the order sorted in the File List Section E Music files can be automatically played during the Slide Show if the Background Music is set to On While a photo list is displayed press the gt Play ENTER L button on the remote control to start slide show SlideShow Control Buttons Button Operations ENTER L Play Pause the Slide Show gt Play the Slide Show m Pause the Slide Show E Exit Slide Show and return to the photo list aa gt gt Change the SlideShow playing speed TOOLS Run various functions from the Photo menus Playing current group 1 Press the A button to move to the Sort key Section Preference 2 Press the lt or K button to select a sorting standard Ker 3 Press the Y button to move to the Group List Se
26. installation is complete the PC Share Manager icon appears on your Desktop Double click the icon to run the programme English 46 B Using the DLNA Application The Programme Screen Layout a SAMSUNG PC Share Manager Server Media Play PC Se v O 5 hared Folder Menus The following application menus are provided File Share Server and Help Click to share the selected PC server folder Click to cancel sharing Click to refresh the PC folder and files Click to synchronize the share status The folders and files of the PC to be shared are listed Folders shared by the user are listed 0 M MM gt Q File Property Shows information on the selected file or folder e Method 1 Select a file or folder and select the File menu and then select the Property sub menu Method 2 Select a file or folder right click over the selected file or folder and then select Property from the pop up menu lt Method 1 gt lt Method 2 gt j a SAMSUNG PC Share Manager a 82 SAMSUNG PC Share Manager a File Share Server Help Server Media Play PC Se v E x L Server Media Play HC 2 v Shared Folder My Computer pee e Gee C szg Gee T ee b Share C Share Name Unshare Folder Folder1 Kind File Folder Folder2 Folder2 Path Ges rn Size 116 02 MB Folders Folder Content Folder 1 File 8 rades Ofolders Created Date 2008 7 17 C Documents and Settings Exit
27. lt Backward search gt gt Forward search a file Lm Stop gt Play Lit Pause Device with built in After switching to the device when you Tuner are watching a TV Programme P W FP A button Audio Device When Receiver is activated Volume MUTE button The Anynett function only works when the active source on the TV remote control is set to TV The Le button works only while in the recordable state You cannot control Anynett devices using the buttons on the TV You can control Anynett devices only using the TV remote control The TV remote control may not work under certain conditions If this occurs reselect the Anynet device The Anynett functions do not operate with other manufacturers products The lt lt gt gt operations may differ depending on the device E Recording You can make a recording of a TV Programme using a Samsung recorder K Saree 1 Press the TOOLS button Press the ENTER C button to select Anynet HDMI CEC 2 Press the A or Y button to select Recording Immediately and press the ENTERL Rann button Recording begins DVO RENO When there is more than one recording device pas Ni i Setup When multiple recording devices are connected the recording devices are listed Press the A or Y button to select a recording device and press the ENTER L button Recording begins When the recording device is not displayed select Device List and press the Red Sie O GHEE oE
28. no further charge You need not require recipients to copy the Corresponding Source along with the object code If the place to copy the object code is a network server the Corresponding Source may be on a different server operated by you or a third party that supports equivalent copying facilities provided you maintain clear directions next to the object code saying where to find the Corresponding Source Regardless of what server hosts the Corresponding Source you remain obligated to ensure that it is available for as long as needed to satisfy these requirements e Convey the object code using peer to peer transmission provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d A separable portion of the object code whose source code is excluded from the Corresponding Source as a System Library need not be included in conveying the object code work A User Product is either 1 a consumer product which means any tangible personal property which is normally used for personal family or household purposes or 2 anything designed or sold for incorporation into a dwelling In determining whether a product is a consumer product doubtful cases shall be resolved in favor of coverage For a particular product received by a particular user normally used refers to a typical or common use of that class of product regardless of th
29. optimized during manufacturing D Sub and HDMI DVI Input f Horizontal Frequency Vertical Frequency Pixel Clock Frequency Sync Polarity IBM 640 x 350 31 469 70 086 25 175 720 x 400 31 469 70 087 28 322 640 x 480 J MAC 832 x 624 d 1152 x 870 fe 720 x 576 f 1152 x 864 J VESA CVT 1280 x 720 f 1280 x 720 1280 x 960 J 640 x 480 J 640 x 480 E 640 x 480 ES 800 x 600 800 x 600 800 x 600 1024 x 768 p 1024 x 768 sb 1024 x 768 VESA DMT 1152 x 864 an 1280 x 1024 1280 x 1024 1280 x 800 J 1280 x 800 J 1280 x 960 1360 x 768 1440 x 900 1440 x 900 J 1680 x 1050 146 250 1280 x 720 52 500 70 000 89 040 T VESA GTF 1280 x 1024 74 620 70 000 128 943 i VESADMT 1920 x 1080p 67 500 60 000 148 500 DTV CEA When using an HDMI DVI cable connection you must use the HDMI IN 1 DVI jack The interlace mode is not supported The set might operate abnormally if a non standard video format is selected Separate and Composite modes are supported SOG is not supported Too long or low quality VGA cable can cause picture noise at high resolution modes 1920x1080 SEBBE English 17 Setting up the TV with your PC Preset Press the SOURCE button to select PC mode Q Auto Adjustment Use the Auto Adjust function to have the TV automatically adjust the video signals it receives Brightness The function also automatically fine tunes the s
30. or gt button to select Setup then press the ENTER L button 4 3 Press the A or Y button to select the desired option SETUP 4 Press the lt or gt button to select the option then press the ENTER L lt button E To exit Media Play mode press the MEDIA P button on the remote control A P D 1 Photo Music Movie Setup LJ Use Colour View On Off You can select sorting photos by colour If this option is set to On the loading time may be increased to collect colour information from the photos om SUM Device Use Colour View Un x Music Repeat Mode On LJ Music Repeat Mode On Off SR E Select to repeatedly play music files 6t the DIVAC VOD registration code Get the DivX VOD deactivation code Screen Saver Run Time 2 hours Q Cont movie play help On Off Information Remove Safely Select to display the help pop up message for continuous movie playback If this is set to ON the loading time increases for collecting the colour information a SUM Device Move lt gt Adjust D Return Q Get the DivX VOD registration code Shows the registration code authorized for the TV If you connect to the DivX web site and register the registration code with a personal account you can download VOD registration file If you play the VOD registration using Media Play the registration is completed For more information on DivX VOD visit www DivX com Q Get the DivX VOD deactivation code When DivX VO
31. publicly available network server or other readily accessible means then you must either 1 cause the Corresponding Source to be so available or 2 arrange to deprive yourself of the benefit of the patent license for this particular work or 3 arrange in a manner consistent with the requirements of this License to extend the patent license to downstream recipients Knowingly relying means you have actual knowledge that but for the patent license your conveying the covered work in a country or your recipient s use of the covered work in a country would infringe one or more identifiable patents in that country that you have reason to believe are valid If pursuant to or in connection with a single transaction or arrangement you convey or propagate by procuring conveyance of a covered work and grant a patent license to some of the parties receiving the covered work authorizing them to use propagate modify or convey a specific copy of the covered work then the patent license you grant is automatically extended to all recipients of the covered work and works based on it A patent license is discriminatory if it does not include within the scope of its coverage prohibits the exercise of or is conditioned on the non exercise of one or more of the rights that are specifically granted under this License You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing s
32. refer to Setting up Internet TV Using the Widget Gallery You can use Run Service Lock Install Service at the existing widget and you can see description of the widget service that isn t installed On the Internet TV you can add and use various widgets provided by service provider It may vary according to contents provider e Run Service Runs the widget service e Lock Set the service lock e Install Service or Delete Service Install or delete widget service Using the YouTube Widget You can watch the movie provided by YouTube bad If you have the account in YouTube Register account information using Account _ YouTube rar management Then you can use My Favourites category l aut sce L The menu can be changed by web service site S amener There may be inappropriate contents for child In this case use Lock function in te E ete Id reacts to U S bailout plan 0 01 30 252 Rating i 2009 02 07 Widget Gallery Most Linked Most Respomded Featured English 58 Troubleshooting for internet TV Problem Possible Solution Some widget services do not work Check with that service provider In the widget press the green button and get contact information or refer to help website for widget service provider information Refer to Help website page What is the advantage of single sign If you create account and register your login information of desired service you can on access personalized conten
33. section 7 This requirement modifies the requirement in section 4 to keep intact all notices cc You must license the entire work as a whole under this License to anyone who comes into possession of a copy This License will therefore apply along with any applicable section 7 additional terms to the whole of the work and all its parts regardless of how they are packaged This License gives no permission to license the work in any other way but it does not invalidate such permission if you have separately received it d Ifthe work has interactive user interfaces each must display Appropriate Legal Notices however if the Program has interactive interfaces that do not display Appropriate Legal Notices your work need not make them do so A compilation of a covered work with other separate and independent works which are not by their nature extensions of the covered work and which are not combined with it such as to form a larger program in or on a volume of a storage or distribution medium is called an aggregate if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation s users beyond what the individual works permit Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate Conveying Non Source Forms You may convey a covered work in object code form under the terms of sections 4 and 5 provided that you also c
34. supplied please purchase these additionally Remove the screws from the centre back of the TV put the screws into the clamps and then fasten the screws onto the TV again Screws may not be supplied with the product In this case please purchase the screws of the following specifications Screw Specifications For a32 40 Inch LED TV M6 X L15 For a 40 55 inch LED TV M8 X L30 Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string tightly Install the TV near to the wall so that it does not fall backwards It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV Untie the string before moving the TV Verify all connections are properly secured Periodically check connections for any sign of fatigue for failure If you have any doubt about the security of your connections contact a professional installer English 69 Troubleshooting Before Contacting Service Personnel Before contacting service personnel Problem No sound or picture Normal picture but no sound Screen is black and power indicator light blinks steadily No picture or black and white picture Sound and picture interference Blurred or snowy picture distorted sound Remote control malfunctions Check signal cable message is displayed On PC mode Not Supported Mode mess
35. the Internet as the MAC address differs from that of the device PC In this case ask your Internet service provider about the procedures to connect devices other than your PC such as your TV to the Internet If your Internet service provider requires an ID or password to connect to the Internet network your TV may not be able to connect to the Internet In this case you have to enter your ID or password when connecting to the Internet using an Internet Sharer Router The internet connection may fail due to a firewall problem In this case contact your Internet service provider If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider please contact Samsung Electronics Cable Network Setup Auto If you connect the LAN cable and it supports DHCP the Internet Protocol IP Settings are Cable Network Setup automatically configured Internet Protocol Setup Auto Network Test 1 Set Network Type to Cable 2 Select Cable Network Setup 3 Set Internet Protocol Setup to Auto The Internet Protocol is set automatically Move CC Select D Return 4 Select Network Test to check the network connectivity Cable Network Setup Manual To connect the TV to the LAN using a static IP address you must set up the Internet Protocol sable Network setup IP Internet Protocol Setup Manual Network Test 1 Set Network Type to Cable IP Address 2 Select Cable Network Setu
36. the equalizer resets the equalizer settings to the factory defaults E Q BD Wise Off On Provides the optimal picture quality for SAMSUNG DVD Blu ray and Home Theatre products which support BD Wise You can enjoy a richer picture when using them connected to this Samsung TV Connect SAMSUNG products that have BD Wise using an HDMI cable BD Wise is available in HDMI mode When the BD Wise set to On the picture mode is automatically changed to the optimal resolution Q Network Type Network Setup For detailed procedures on setting up options refer to the Setting the Network instructions refer to pages 25 27 Q Child Lock Off On This feature allows you to prevent unauthorized users such as children from watching unsuitable programme by muting out video and audio Before the setup screen appears the PIN number input screen appears Enter your 4 digit PIN number The default PIN number of a new TV set is 0 0 0 0 You can change the PIN by selecting Change PIN from the menu You can lock some channels in Channel List refer to page 10 Child Lock is available only in TV mode Q Change PIN You can change your personal ID number that is required to set up the TV Before the setup screen appears the PIN number input screen appears Enter your 4 digit PIN number The default PIN number of a new TV set is 0 0 0 0 If you forget the PIN code press the remote control buttons in the following sequence which resets the PIN to 0 0 0
37. the object code using peer to peer transmission provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d A separable portion of the object code whose source code is excluded from the Corresponding Source as a System Library need not be included in conveying the object code work A User Product is either 1 a consumer product which means any tangible personal property which is normally used for personal family or household purposes or 2 anything designed or sold for incorporation into a dwelling In determining whether a product is a consumer product doubtful cases shall be resolved in favor of coverage For a particular product received by a particular user normally used refers to a typical or common use of that class of product regardless of the status of the particular user or of the way in which the particular user actually uses or expects or is expected to use the product A product is a consumer product regardless of whether the product has substantial commercial industrial or non consumer uses unless such uses represent the only significant mode of use of the product Installation Information for a User Product means any methods procedures authorization keys or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corre
38. the recipient automatically receives a license from the original licensors to run modify and propagate that work subject to this License You are not responsible for enforcing compliance by third parties with this License An entity transaction is a transaction transferring control of an organization or substantially all assets of one or subdividing an organization or merging organizations If propagation of a covered work results from an entity transaction each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party s predecessor in interest had or could give under the previous paragraph plus a right to possession of the Corresponding Source of the work from the predecessor in interest if the predecessor has it or can get it with reasonable efforts You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License For example you may not impose a license fee royalty or other charge for exercise of rights granted under this License and you may not initiate litigation including a cross claim or counterclaim in a lawsuit alleging that any patent claim is infringed by making using selling offering for sale or importing the Program or any portion of it 11 12 13 14 Patents A contributor is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based The w
39. with the requirements of this License Each contributor grants you a non exclusive worldwide royalty free patent license under the contributor s essential patent claims to make use sell offer for sale import and otherwise run modify and propagate the contents of its contributor version In the following three paragraphs a patent license is any express agreement or commitment however denominated not to enforce a patent such as an express permission to practice a patent or covenant not to sue for patent infringement To grant such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party If you convey a covered work knowingly relying on a patent license and the Corresponding Source of the work is not available for anyone to copy free of charge and under the terms of this License through a publicly available network server or other readily accessible means then you must either 1 cause the Corresponding Source to be so available or 2 arrange to deprive yourself of the benefit of the patent license for this particular work or 3 arrange in a manner consistent with the requirements of this License to extend the patent license to downstream recipients Knowingly relying means you have actual knowledge that but for the patent license your conveying the covered work in a country or your recipient s use of the covered work in a country would infringe one or
40. would use the Y and A buttons on the remote control voL Press to increase or decrease the volume In the on screen menu use the VOL buttons as you would use the lt and K buttons on the remote control MENU Press to see an on screen menu of your TV s features SOURCE 4 Toggles between all the available input sources In the on screen menu use this button as you would use the ENTER LY button on the remote control SPEAKERS English 2 Accessories Remote Control amp Batteries AAA x 2 Cover Bottom Programme CD J a Holder Wire Cable Cleaning Cloth Depending on the model Mini Remote Control amp Batteries 3V 3 dzia M4 X L10 E odel Holder Ring 4ea Holder Wire Stand Holder Wire 3ea e Owner s Instructions e Warranty card e Safety Guide e Registration Cards Please make sure the following items are included with your LED TV If any items are missing contact your dealer Warranty card Safety Guide Registration Cards Not available in all locations The items colour and shape may vary depending on the model English 3 Viewing the Connection Panel TV Rear Panel SERVICE Power Input AUDIO Q AuDIo PR COMPONENT TN The product colour and shape may vary depending on the model KENSINGTON LOCK depending on the model The Kensington Lock optional is a device used to physically fix the system when used in
41. 0 0 0 0 If you want to change PIN number use the Change PIN function refer to page 20 Network Setup The Plug amp Play feature is only available in the TV mode Child Lock English 9 CHANNEL p Channel Menu U Area You can change the area for channels A Area Asia Europe Auto Store l E Auto Store Manual Store l SI Ch I Li You can scan for the frequency ranges available to you and availability depends on your BA E area Automatically allocated programme numbers may not correspond to actual or desired Fine Tune programme numbers E Ifa channel is locked using the Child Lock function the PIN input window appears Scans for all channels with active broadcast stations and stores them in the TV s memory Ifyou want to stop Auto Store press the ENTER C button The Stop Auto Store message will be displayed Select Yes by pressing the lt or gt button then press the ENTER L button LJ Manual Store Scans for a channel manually and stores it in the TV s memory If a channel is locked using the Child Lock function the PIN input window appears e Programme Programme number to be assigned to a channel Sets the programme number using the A Y or number 0 9 buttons e Colour System Auto PAL SECAM NTSC4 43 NTSC 3 58 Sets the colour system value using the A or Y button Sound System BG DK 1 M Sets the sound system value using the A or Y button e Channel When you k
42. Advanced Settings Samsung s new TVs allow you to make even more precise picture settings than previous Advanced Settings models Black Tone Off Advanced Settings is available in Standard or Movie mode Dynamic Contrast Medium a s G In PC mode you can only make changes to Dynamic Contrast Gamma and White S T Balance from among the Advanced Settings items White Balance Flesh Tone 0 Black Tone Off Dark Darker Darkest Edge Enhancement On You can select the black level on the screen to adjust the screen depth Move Enter 5 Return Dynamic Contrast Off Low Medium High You can adjust the screen contrast so that the optimal contrast is provided Gamma You can adjust the primary colour red green blue Intensity Colour Space Colour Space is a colour matrix composed of red green and blue colours Select your favourite colour space to experience the most natural colour e Auto Auto Colour Space automatically adjusts to the most natural colour tone based on programme sources e Native Native Colour Space offers deep and rich colour tone e Custom Adjusts the colour range to suit your preference E Changing the adjustment value will refresh the adjusted screen E Settings can be adjusted and stored for each external device you have connected to an input of the TV For example if you have a DVD player connected to HDMI 1 and it is currently selected settings and adjustments will be saved for the DVD pl
43. C3 LZ Server Media Play pC S lt BJ LE C3 4a Server Media Play PC Se lt Refresh DB ee Shared Folder My Computer Shared Folder My Computer Shared Folder SetDevice Policy A See n er ee j Bm erm ca ID Bee and Settnoswastzoaw 2 8 ipp E share Je Die Name Size O Folder1 C WDocuments and Settin Name Size O Folder1 C WDocuments and Settin Name Size O Folder1 Folder1 Folder1 Folder1 Folder2 x Folder3 O Folde MESECA Folder4 Grada roperty Folders C WDocuments and Settin Folder2 C WDocuments and Settin ST Folder4 Folders Folders SAMSUNG PC Share Manager Enable share option for the selected item Yes No Cancelling a Shared Folder You can cancel a shared folder on your PC Select a folder from the Shared Folder pane and select Unshare Folder e Method 1 Select a folder from the Shared Folder pane select the Share menu and then select Unshare Folder e Method 2 Select a folder from the Shared Folder pane right click over the selected folder and then select Unshare Folder from the pop up menu e Method 3 Locate the mouse pointer over a folder in the Shared Folder pane and drag amp drop the folder into the My Computer pane If a message appears asking you to confirm the cancelation select Yes lt Method 1 gt lt Method 2 gt lt Method 3 gt IE SAMSUNG
44. D is not registered the registration deactivation code is displayed If you execute this function when DivX VOD is registered the current DivX VOD registration is deactivated LC Screen Saver Run Time 2 hours 4 hours 8 hours Select to set the waiting time before the screen saver appears LC Information Select to viewing the information of the connected device Q Remove Safely You can remove the device safely from the TV English 44 MEDIA PLAY DLNA Setting the DLNA Network DLNA allows you to watch pictures musics and videos saved on your PC or on your TV through a network connection in Media Play mode This removes the need to copy them to a USB storage device and then connect the device to your TV To use DLNA the TV must be connected to the network and the DLNA application must be installed on your PC Network Connection Diagram Cable External Modem ADSL VDSL Cable TV Samsung Wireless LAN Adapter LAN Cable 1 For more information on how to configure your network refer to Setting the Network You are recommended to locate both TV and PC in same subnet The first 3 parts of the subnet address of the TV and the PC IP addresses should be the same and only the last part the hos
45. ES 17 Interpretation of Sections 15 and 16 If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee S END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program and you want it to be of the greatest possible use to the public the best way to achieve this is to make it free software which everyone can redistribute and change under these terms To do so attach the following notices to the program It is safest to attach them to the start of each source file to most effectively state the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found lt one line to give the programs name and a brief idea of what it does gt Copyright C lt year gt lt name of author gt This program is free software you can redistribute it and or modify it under the terms of the GNU General Public License as published by the Free Software Foundation either version 3 of the License or at your option any later version This program is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warr
46. ES ATTORNEY FEES EXPENSES OR ANY OTHER DAMAGES WHATSOEVER ARISING OUT OF OR IN CONNECTION WITH ANY INFORMATION CONTAINED IN OR THE USE OF THE CONTENTS LIBRARY EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES English 54 B Using the TV Memory Contents You can use enjoy content stored in the TV memory You can add delete content to from the TV memory To add delete content select Content Management To return to Content Library main menu press the EXIT button Q Gallery This function plays a SlideShow with high resolution images and background music and produces various atmospheres Using the Gallery function of the TV you can change your home atmosphere The copyrights of the Gallery contents and all issues related to them are reserved by TimeSpace Inc Press the ENTER L lt button to pause the SlideShow and also press the ENTER L button to resume the SlideShow Press the INFO button to display information on the selected photo This is not displayed if the photo has no information Q Cooking You can view various recipes and then easily follow them step by step Enjoy these contents which will give you great ideas for meals The recipes introduced in the Cooking contents on the Samsung TV are based on recipes published by Anness Publishing The copyrights of the Cooking contents and all issues related to them are reserved by Practical Pictures Q Game This category provides entertainment games for the whole family
47. For the buttons used in the games refer to the directions on the screen Colour Buttons for Games Button Operations Red Press to move to the game home screen Green Press to pause the game Yellow Option Key Blue Press to exit the game Q Children This is educational and interactive content that children can watch repeatedly E The copyrights of the Children contents and issues related to them reserved by UpToTen Q Wellness This is beneficial health management content relaxing sound that can be enjoyed by the whole family LY Others The default content is not saved in the TV memory You can copy new content to the TV memory using the Content Management screen English 55 B Using the Content Management Q Content Management You can add or delete contents using the Content Management You can select multiple content items by selecting content items repeatedly and pressing pU the Yellow button My Contents You can check the content saved in the TV memory for each subitem of the Content Library e Select a content item and press the ENTER L button You can play or delete the selected content item USB You can check the content saved on the USB device for each subitem of the Content Library e Select a content item and press the ENTER La button You can play the selected content item or copy it to the TV memory Management E Content Library only supports USB Mass Storage Class devices MSC MSC is a Mass
48. HG 3 m Viewing the Connection Bangl sees ee eee ee eee eee eee d m Viewing the Remote Control 2 6 SV DIS Gn GT 21 TG recente earn ore ten nee ere ter eae 7 m Installing Batteries in the Remote Control see eee eee eee 7 OPERATION E ViewindithermenU S teen nett E e e a ne star a 8 m Placing Your Television in Standby Mode sese 9 mP A Ray Feature ae a gene ele eerie cet AT 9 CHANNEL STI JIG TH E ert ot neat E E E AA 10 managing Channels serrate cee E a amam eueetace 11 PICTURE m Confiouning the Picture Me is B Viewing Fict re in Picture m e eee E tat ueetassacatessencences 16 m Using Your TV as a Computer PC Display sese eee eee eee Iy m Setting up the TV with your E C 22 ccc cscs cces acesee ce eeeceoeeccecscese sees 18 Sega eiee He T GT 18 m Sclectingitne Sound Mode ee aee a 19 SETUP Bm Configuring tne Setup Wem mex eee cece cere ert eee eee 20 E Settingthe TMe eee nearer eee eet eer eer ner een eee ere 21 E Network Connection a enn a E eres sete er 22 m Setting the Network Aaea a ares e A S as 25 INPUT SUPPORT Mi TEAS FG zee e r arate A sso we 28 SUD TIS GUIE T 28 MEDIA PLAY USB amp DLNA m Connecting awSB Device 30 BMedia PlayiGUNCHOlE creme ea aunn emanate acts 31 AO E O 1 E tence ES Mi oto B Sel elai Men 33 B Viewing aPhOlO Or SIG TG eee 34 E Slide Show Option Memes e 30 Moot Ne Muse lic Gaaeeeee eeeersreneereacceeeste cee ccm meeccene ccene os egnees 36 m Music bist Option Monin secre neste ce neces
49. SERIES Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care centre Country Customer Care Centre TY Web Site AUSTRALIA 1300 362 603 www samsung com au CHINA 800 810 5858 www samsung com cn 400 810 5858 010 6475 1880 HONG KONG 3698 4698 www samsung com hk INDIA 3030 8282 www samsung com in 1 800 3000 8282 1800 110011 INDONESIA 0800 112 8888 www samsung com id JAPAN 0120 327 527 www samsung com jp MALAYSIA 1800 88 9999 www samsung com my NEW ZEALAND 0800 SAMSUNG 0800 726 786 www samsung com nz PHILIPPINES 1 800 10 SAMSUNG 726 7864 www samsung com ph 1 800 3 SAMSUNG 726 7864 02 5805777 SINGAPORE 1800 SAMSUNG 726 7864 www samsung com sg 1800 29 3232 www samsung com th ine 02 689 3232 TAIWAN 0800 329 999 www samsung com tw VIETNAM 1 800 588 889 www samsung com vn SOUTH AFRICA 0860 SAMSUNG 726 7864 www samsung com za U A E 800 SAMSUNG 726 7864 www samsung com ae 8000 4726 imagine the possibilities Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register Model Bernal NO BN68 02078A 00 Q License Without producing harmful VOC Volatile Organic Compounds Samsung s Eco friendly Crystal Design expresses colour gradation thanks to our dual injection technology SRS C TruSurround HD SRS and
50. Source Code The source code for a work means the preferred form of the work for making modifications to it Object code means any non source form of a work A Standard Interface means an interface that either is an official standard defined by a recognized standards body or in the case of interfaces specified for a particular programming language one that is widely used among developers working in that language The System Libraries of an executable work include anything other than the work as a whole that a is included in the normal form of packaging a Major Component but which is not part of that Major Component and b serves only to enable use of the work with that Major Component or to implement a Standard Interface for which an implementation is available to the public in source code form A Major Component in this context means a major essential component kernel window system and so on of the specific operating system if any on which the executable work runs or a compiler used to produce the work or an object code interpreter used to run it The Corresponding Source for a work in object code form means all the source code needed to generate install and for an executable work run the object code and to modify the work including scripts to control those activities However it does not include the work s System Libraries or general purpose tools or generally available free programs whic
51. T button when the alarm window appears the Media Contents are not played E To turn off the media contents transmission from the mobile phone set Media to Off in Setup of the Home Network Centre The contents may not be played on the TV depending on their resolution and format Media play control buttons Button Operations Move the cursor and select an item nid While playing a movie file Move forwards or backwards through the movie file in 10 second interval ENTERC Pressing the ENTER L button during play pauses the play Pressing the ENTERL button during pause resumes the play RETURN Return to the previous menu TOOLS Run various functions from the Photo Music and Movie menus INFO Show file information EXIT Stop Media Play mode and Returns to TV mode The ENTER L 2 and lt gt buttons may not work depending on the type of media content E Using the mobile device you can control playing media For details refer to each user s guide English 63 RECOMMENDATIONS E Teletext Feature Most television stations provide written information services via Teletext The index page of the Teletext service gives you information on how to use the service In addition you can select various options to suit your requirements by using the remote control buttons For Teletext information to be displayed correctly channel reception must be stable Otherwise information may be missing or some pages may not be displayed O exit
52. TV English 37 Playing Music Playing a music file 1 2 3 Press the Y button to select the File List Section o 00 00 04 00 04 04 7 3 37 Press the lt or K button to select a music file to be played ss sat Biss Press the gt Play ENTER C4 button This menu only shows files with the MP3 file extension Files with other file extensions are not displayed even if they are saved on the same USB pe device m The selected file is displayed at the top with its playing time To adjust the music volume press the volume button on the remote control To mute the sound press the MUTE button on the remote control If the sound is odd when playing MP3 files adjust the Equalizer and SRS TruSurround HD in the Sound menu An over modulated MP3 file may cause a sound problem The playing duration of a music file may be displayed as 00 00 00 if its playing time information is not found at the start of the file lt lt REW or gt gt FF buttons do not function during play Ss La Pause lt gt Previous Next a Tools DS Return Ss Music Play Control Buttons Button Operations ENTER L Play Pause the music file gt Play the music file I Pause the music file E Exit play mode and return to the music list TOOLS Run various functions from the Music menus Music function information icon a When all music files in the folder or the selected file are repeated Repeat Mode is
53. U Lesser General Public License instead of this License But first please read lt http www gnu org philosophy why not lgpl html gt S LICENSE ISSUES The OpenSSL toolkit stays under a dual license i e both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit See below for the actual license texts Actually both licenses are BSD style Open Source licenses In case of any license issues related to OpenSSL please contact openssl core openssl org OpenSSL License Copyright c 1998 2007 The OpenSSL Project All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgment This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org 4 The names OpenSSL Toolkit and OpenSSL Project must not be used to endorse or promote products derived from this software without prior written permission F
54. VICE Connector for service only S SSS English 5 Viewing the Remote Control You can use the remote control up to a distance of about 23 feet from the TV The performance of the remote control may be affected by bright light The product colour and shape may vary depending on the model POWER Turns the TV on and off TV Selects the TV mode directly NUMERIC BUTTONS Press to change the channel 4 Performs the same function as the ENTER C4 button of the directional buttons When switching channels with the numeric buttons and you press the channel number and then the ENTER L button the channel is immediately switched CH LIST Displays the Channel List on screen TOOLS Use to quickly select frequently used functions INTERNET Press to use various internet services to view useful information and entertaining content COLOUR BUTTONS Use these buttons in the Channel list Internet TV Media Play menu etc Press to increase or decrease the volume MUTE xX Press to temporarily cut off the sound INFO Press to display information on the TV screen Use these buttons in the DMA Media Play and Anynett modes Le This remote can be used to control recording on Samsung recorders with the Anynett feature ON OFF 2 Pressing the ON OFF 3 light button toggles between on and off When the remote control is on and a button is pr
55. a public place If you want to use a locking device contact the dealer where you purchased the TV The location of the Kensington Lock may be different depending on its model LAN Connect a LAN cable to this port to connect to the Network ANTIN Connects to an antenna or cable TV system COMPONENT IN Connects Component video audio When connecting use the appropriate connector AV IN VIDEO R AUDIO L Video and audio inputs for external devices such as a camcorder or VCR When connecting use the appropriate connector English 4 PC IN PC DVI AUDIO IN Connect to the video and audio output jack on your PC If your PC supports an HDMI connection you can connect this to the HDMI IN 1 DVI 2 3 or 4 terminal If your PC supports a DVI connection you can connect this to the HDMI IN 1 DVI PC DVI AUDIO IN terminal HDMI IN 1 DVI 2 3 4 Connects to the HDMI jack of a device with an HDMI output No additional Audio connection is needed for an HDMI to HDMI connection Use an HDMI cable which is smaller than 14mm What is HDMI HDMI High Definition Multimedia Interface is an interface that enables the transmission of digital audio and video signals using a single cable e The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP High Bandwidth Digital Copy Protection coding feature installed E The TV may not output sound and pictures may be displayed with
56. age is displayed The damaged picture appears in the corner of the screen The Resets all settings to the default values message appears You may see small particles if you look closely at the edge of the bezel surrounding the TV screen Possible Solution Check that the mains lead has been connected to a wall socket Check that you have pressed the button on your set Check the picture contrast and brightness settings Check the volume Check the volume Check whether the MUTE button has been pressed on the remote control Check the Speaker Select settings On your computer check Power Signal Cable The TV is using its power management system Move the computer s mouse or press any key on the keyboard Adjust the colour settings Check that the broadcast system selected is correct Try to identify the electrical appliance that is affecting the set and move it further away Plug your set into a different mains socket Check the direction location and connections of your aerial This interference is often due to the use of an indoor aerial Replace the remote control batteries Clean the upper edge of the remote control transmission window Check the battery terminals Check that the signal cable is firmly connected to the PC or video sources Check that the PC or video sources are turned on Check the maximum resolution and the frequency of the video adaptor Compare these values with the data in the Disp
57. ammed menu Edit Channel Name Channels can be labelled so that their call letters appear whenever the channel is selected Sort This operation allows you to change the programme numbers of the stored channels This operation may be necessary after using the auto store Select All Deselect All e Select All You can select all the channels in the channel list e Deselect All You can deselect all the selected channels You can only select Deselect All when there is a selected channel Auto Store For detailed procedures on setting up options refer to page 10 If a channel is locked using the Child Lock function the PIN input window appears Channel List Option Menu in Programmed You can view modify or delete a reservation Press the TOOLS button to use the option menu pawwebold Change Info Cancel Schedules l Information Select to change a viewing reservation Select All Cancel Schedules Select to cancel a viewing reservation Information Select to view a viewing reservation You can also change the reservation information Select All Select all reserved programmes English 12 PICTURE p Configuring the Picture Menu Q Mode You can select the type of picture which best corresponds to your viewing requirements Mode Standard a Press the TOOLS button to display the Tools menu You can also set the picture mode by s selecting Tools Picture Mode Contrast Brightness Dynamic sah Se
58. and b permanently if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation Moreover your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means this is the first time you have received notice of violation of this License for any work from that copyright holder and you cure the violation prior to 30 days after your receipt of the notice Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License If your rights have been terminated and not permanently reinstated you do not qualify to receive new licenses for the same material under section 10 Acceptance Not Required for Having Copies You are not required to accept this License in order to receive or run a copy of the Program Ancillary propagation of a covered work occurring solely as a consequence of using peer to peer transmission to receive a copy likewise does not require acceptance However nothing other than this License grants you permission to propagate or modify any covered work These actions infringe copyright if you do not accept this License Therefore by modifying or propagating a covered work you indicate your acceptance of this License to do so Automatic Licensing of Downstream Recipients Each time you convey a covered work
59. ans a major essential component kernel window system and so on of the specific operating system if any on which the executable work runs or a compiler used to produce the work or an object code interpreter used to run it The Corresponding Source for a work in object code form means all the source code needed to generate install and for an executable work run the object code and to modify the work including scripts to control those activities However it does not include the work s System Libraries or general purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work For example Corresponding Source includes interface definition files associated with source files for the work and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require such as by intimate data communication or control flow between those subprograms and other parts of the work The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source The Corresponding Source for a work in source code form is that same work Basic Permissions All rights granted under this License are granted for the term of copyright on the Program and are irrevocable provided the stated conditions are met This License explicitly affirms your unlimited permission to ru
60. anty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License for more details You should have received a copy of the GNU General Public License along with this program If not see lt http Awww gnu org licenses gt Also add information on how to contact you by electronic and paper mail If the program does terminal interaction make it output a short notice like this when it starts in an interactive mode lt program gt Copyright C lt year gt lt name of author gt This program comes with ABSOLUTELY NO WARRANTY for details type show w This is free software and you are welcome to redistribute it under certain conditions type show C for details The hypothetical commands show w and show c should show the appropriate parts of the General Public License Of course your program s commands might be different for a GUI interface you would use an about box You should also get your employer if you work as a programmer or school if any to sign a copyright disclaimer for the program if necessary For more information on this and how to apply and follow the GNU GPL see lt http www gnu org licenses gt The GNU General Public License does not permit incorporating your program into proprietary programs If your program is a subroutine library you may consider it more useful to permit linking proprietary applications with the library If this is what you want to do use the GN
61. ay Attach your LED TV to the stand Two or more people should carry the TV Make sure to distinguish between the front and back of the stand when assembling them To make sure the TV is installed on the stand at a proper level do not apply excess downward pressure to the upper left of right sides of the TV Fasten screws at position and then fasten screws at position Stand the product up and fasten the screws If you fasten the screws with the LED TV placed down it may lean to one side English 65 Disconnecting the Stand Remove screws from the back of the TV 2 Separate the stand from the TV Two or more people should carry the TV 3 Cover the bottom hole with the cover A Installing the Wall Mount Kit Wall mount items sold separately allow you to mount the TV on the wall For detailed information on installing the wall mount see the instructions provided with the Wall Mount items Contact a technician for assistance when installing the wall mounted bracket Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own Do not install your Wall Mount Kit while your TV is turned on It may result in personal injury due to electric shock Remove the stand and cover the bottom hole with a cap and fasten with two screws English 66 Assembling the Cables Q Stand Type Enclo
62. ay your freedom to share and change the works By contrast the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program to make sure it remains free software for all its users We the Free Software Foundation use the GNU General Public License for most of our software it applies also to any other work released this way by its authors You can apply it to your programs too When we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for them if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to prevent others from denying you these rights or asking you to surrender the rights Therefore you have certain responsibilities if you distribute copies of the software or if you modify it responsibilities to respect the freedom of others For example if you distribute copies of such a program whether gratis or for a fee you must pass on to the recipients the same freedoms that you received You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights Developers that use the GNU GPL protect your rights with two steps 1 a
63. ayer Colour Red Green Blue Yellow Cyan or Magenta Colour is available when Colour Space is set to Custom In Colour you can adjust the RGB values for the selected colour To reset the adjusted RGB value select Reset Red Adjusts the red saturation level of the selected colour Green Adjusts the green saturation level of the selected colour Blue Adjusts the blue saturation level of the selected colour Reset Resets the colour space to the default values White Balance You can adjust the colour temperature for more natural picture colours R Offset Adjusts the red colour darkness G Offset Adjusts the green colour darkness B Offset Adjusts the blue colour darkness R Gain Adjusts the red colour brightness G Gain Adjusts the green colour brightness B Gain Adjusts the blue colour brightness Reset The previously adjusted white balance will be reset to the factory defaults Flesh Tone You can emphasize the pink flesh tone in the picture Changing the adjustment value will refresh the adjusted screen Edge Enhancement Off On You can emphasize object boundaries in the picture xvYCC Off On Setting the xvYCC mode to on increases detail and colour space when watching movies from an external device ie DVD player connected to the HDMI or Component IN jacks xvYCC is available when the picture mode is set to Movie and the external input is set to HDMI or Component mode This functi
64. c View Title Artist Mood Genre Folder Preference The Music files are sorted according to the newly selected sorting standard 5 Press the Y button to move to the File List Section Press the Play ENTERL4 button to start playing music in the order selected by the user SUM Device E Favourites Settings mSelect 4 Tools 9 Return E To move to the previous next group press the lt lt REW or gt gt FF button E Music information is automatically set The mood information extracted from a music file may differ from the expectations of the user You can change the mood and preference E If there is no title information for a music file the filename is displayed If no information is available for the Artist Aloum Year or Genre the corresponding item is displayed as blank LI Basic View Shows the folders of the USB memory device If you select a folder and press the ENTER L button only the music files contained in the selected folder are displayed When sorted according to the Basic View you cannot set Favourites files Q Title Sorts the music titles in symbol number alphabet special order and shows the music file Q Artist Sorts the music file by artist in symbol number alphabet special order Q Mood Energetic Rhythmical Sad Exciting Calm Unclassified Sorts music files by the mood You can change the music mood information Q Genre Sorts music files by the genre LI Folder Sorts music
65. censes to the work the party s predecessor in interest had or could give under the previous paragraph plus a right to possession of the Corresponding Source of the work from the predecessor in interest if the predecessor has it or can get it with reasonable efforts You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License For example you may not impose a license fee royalty or other charge for exercise of rights granted under this License and you may not initiate litigation including a cross claim or counterclaim in a lawsuit alleging that any patent claim is infringed by making using selling offering for sale or importing the Program or any portion of it Patents A contributor is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based The work thus licensed is called the contributor s contributor version Acontributor s essential patent claims are all patent claims owned or controlled by the contributor whether already acquired or hereafter acquired that would be infringed by some manner permitted by this License of making using or selling its contributor version but do not include claims that would be infringed only as a consequence of further modification of the contributor version For purposes of this definition control includes the right to grant patent sublicenses in a manner consistent
66. com gt naan gt Insviau medi 2 0 Internet TV www samsung com san pham nghe nhin gt may thu h nh gt medi 2 0 Internet TV www samsung com Consumer television gt medi 2 0 Internet TV E Approaching step may be changed later on It can be different links for special countries English 59 HOME NETWORK CENTRE Home Network Centre About the Home Network Centre The Home Network Centre connects the TV and mobile phones through a network You can view call arrivals text message contents and schedules set on the mobile phone on the TV using the Home Network Centre In addition you can play the media contents saved on the mobile phones such as videos photos and music by importing them onto the TV via the network If the device supports DLNA DMC Digital Media Controller function Home Network Centre function is available This function is for compatibility with Samsung mobile phone which will be released later on For more information visit www samsung com or contact Samsung call center The mobile device may need additional software installation For details refer to each user s guide To play media contents on the TV you need a mobile phone or PDA Personal Digital Assistant that supports the DLNA DMC Digital Media Controller function Connecting to the Home Network Centre For more information about the network settings refer to page 22 e Connecting to a WLAN Ad hoc network 1 Connec
67. conds 4 Press the ENTER L button Select the appropriate area by pressing the A or Y button Press the ENTER L button to confirm your choice Menu Language English gt 5 The channel search will start and end automatically Press the ENTER La button at any time to interrupt the memorization process E After all the available channels are stored the message Set current date and time is displayed 6 Press the ENTER CC button Select the Day Month Year Hour or Minute by pressing the lt or K button Set the Day Month Year Hour or Minute by pressing the A or Y button You can also set the Day Month Year Hour and Minute by pressing the number buttons on the remote control The connection method to provide the best quality HD is offered After confirming the method press the ENTERC button Press the lt or gt button to select See Product Guide or Watch TV then the ENTER CC button e See Product Guide You are moved to the Product Guide where you can view the introduction to the main functions of your new HDTV e Watch TV You can watch the memorized channels If you want to reset this feature 1 Press the MENU button to display the menu Press the A or Y button to select Setup then press the ENTER L button Ot Plug amp Play Language English 2 Press the ENTER L lt button again to select Plug amp Play Time Enter your 4 digit PIN number The default PIN number of a new TV set is
68. copy an appropriate copyright notice keep intact all notices stating that this License and any non permissive terms added in accord with section 7 apply to the code keep intact all notices of the absence of any warranty and give all recipients a copy of this License along with the Program You may charge any price or no price for each copy that you convey and you may offer support or warranty protection for a fee Conveying Modified Source Versions You may convey a work based on the Program or the modifications to produce it from the Program in the form of source code under the terms of section 4 provided that you also meet all of these conditions a The work must carry prominent notices stating that you modified it and giving a relevant date b The work must carry prominent notices stating that it is released under this License and any conditions added under section 7 This requirement modifies the requirement in section 4 to keep intact all notices c You must license the entire work as a whole under this License to anyone who comes into possession of a copy This License will therefore apply along with any applicable section 7 additional terms to the whole of the work and all its parts regardless of how they are packaged This License gives no permission to license the work in any other way but it does not invalidate such permission if you have separately received it d Ifthe work has interactive user interfaces eac
69. ct model to give anyone who possesses the object code either 1 a copy of the Corresponding Source for all the software in the product that is covered by this License on a durable physical medium customarily used for software interchange for a price no more than your reasonable cost of physically performing this conveying of source or 2 access to copy the Corresponding Source from a network server at no charge cc Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source This alternative is allowed only occasionally and noncommercially and only if you received the object code with such an offer in accord with subsection 6b d Convey the object code by offering access from a designated place gratis or for a charge and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge You need not require recipients to copy the Corresponding Source along with the object code If the place to copy the object code is a network server the Corresponding Source may be on a different server operated by you or a third party that supports equivalent copying facilities provided you maintain clear directions next to the object code saying where to find the Corresponding Source Regardless of what server hosts the Corresponding Source you remain obligated to ensure that it is available for as long as needed to satisfy these requirements e Convey
70. ction 4 Select a group using the lt and g buttons se 7 se CEEA 5 Press the gt Play button A slideshow begins with the files of the selected group nii P tig Tp e Alternatively Select a Sort key and then in the File List Section select the photos contained in the desired group To move to the previous next group press the lt lt REW or gt gt FF button Press the TOOLS button Press the A or Y button to select Play Current Group then press the ENTER C4 button Only the photos in the sorting group including the selected files will be used for the Slide Show To perform a Slide Show with only the selected files 1 Press the Y button to select the File List Section 2 Press the lt or K button to select the desired photo in the File List Section 3 Press the Yellow button The Y mark appears to the left of the selected photo If you select one file the Slide Show will not be performed To deselect all selected files press the TOOLS button and select Deselect All Repeat the above operation to select multiple photos 5 Press the gt Play ENTERC button The selected files will be used for the Slide Show English 34 Alternatively In the File List Section press the Yellow buttons to select the desired photos Press the TOOLS button Press the A or Y button to select Slide Show then press the ENTER LC button The selected files will be used for the Slide Show Ey Slide Show Op
71. ction to see the full image without any cut off when HDMI 720p 1080i 1080p or Component 1080 1080p signals are input Depending on the input source the picture size options may vary The items available may differ depending on the selected mode In PC Mode only 16 9 and 4 3 mode can be adjusted Settings can be adjusted and stored for each external device you have connected to an input of the TV Temporary image retention may occur when viewing a static image on the set for more than two hours Wide Zoom Press the K button to Select Position then press the ENTER LY button Press the A or Y button to move the picture up down Then press the ENTER L button Zoom Press the K button to Select Position then press the ENTER L button Press the A or Y button to move the picture up and down Then press the ENTERL button Press the K button to Select Size then press the ENTER L lt button Press the A or Y button to magnify or reduce the picture size in the vertical direction Then press the ENTER L button E After selecting Screen Fit in HDMI 1080i 1080p or Component 1080i 1080p mode Select Position by pressing the lt or gt button Use the A V lt or gt button to move the picture Reset Press the lt or gt button to select Reset then press the ENTER L button You can initialize the setting E Ifyou use the Screen Fit function with HDMI 720p input 1 line will be cut at the top bottom left and right as i
72. e status of the particular user or of the way in which the particular user actually uses or expects or is expected to use the product A product is a consumer product regardless of whether the product has substantial commercial industrial or non consumer uses unless such uses represent the only significant mode of use of the product Installation Information for a User Product means any methods procedures authorization keys or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made If you convey an object code work under this section in or with or specifically for use in a User Product and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term regardless of how the transaction is characterized the Corresponding Source conveyed under this section must be accompanied by the Installation Information But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product for example the work has been installed in ROM The requirement to provide Installation Information
73. e built in tuner which does not allow PIP to function in the same mode Please see PIP Settings below for details PIP a Press the TOOLS button to display the Tools menu You can also configure PIP related settings by selecting Tools PIP E Ifyou select the PIP picture sound refer to the Configuring the Sound Menu instructions refer to pages 18 19 E PIP Settings Main picture Sub picture Component HDMI1 DVI HDMI2 HDMI3 HDMI4 TV AV PC Ifyou turn the TV off while watching in PIP mode and turn it on again the PIP window will disappear E You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke While Internet TV is in operation the PIP function cannot be used L PIP Off On You can activate or deactivate the PIP function Size Source Q Size m l lt l LL oO Position Channel You can select a size of the sub picture Source Move Enter D Return You can select a source of the sub picture L Position gt l lt l Sl lL You can select a position of the sub picture In Double mmj WE mode Position cannot be selected Q Channel You can select the channel for the sub screen Channel is available when the Source is set to TV English 16 B Using Your TV as a Computer PC Display Setting Up Your PC Software Based on Windows XP The Windows display settings for a typical com
74. e deleted mobile device turns on or tries to connect to the TV it may be shown on the list Q Media Home Network Centre Shows a list of mobile phones which is available to control media contents videos photos music from the phone BEA Message 111 1234 5671 Allowed S i i i i i Besides mobile phone other mobile devices that support DLNA DMC are available EO Te Allowed amp Setup 111 1234 5673 Denied Allows the mobile phone 111 1234 5674 Denied Denied Blocks the mobile phone Spaun pen Delete Deletes the mobile phone from the list This function just deletes the corresponding name on the list If the deleted mobile device turns on or tries to connect to the TV it may be shown on the list Q Setup Home Network Centre Message On Off You can determine whether to use the message function the call arrivals text message contents and schedules set on the mobile phone BEA Message Message rl Media Media Media On Off TV name You can select whether to use the play function that plays the contents videos photos music from the mobile phone TV name Return i Exit You can set the TV name so as to find it easily on the mobile device If you selects User Input you can type the TV name by OSK On Screen Keyboard English 61 E Using the Message Function Using this function you can view the call arrivals text message contents and schedules set on the mobile phone through the alarm w
75. e their own removal in certain cases when you modify the work You may place additional permissions on material added by you to a covered work for which you have or can give appropriate copyright permission Notwithstanding any other provision of this License for material you add to a covered work you may if authorized by the copyright holders of that material supplement the terms of this License with terms a Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License or b Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it or c Prohibiting misrepresentation of the origin of that material or requiring that modified versions of such material be marked in reasonable ways as different from the original version or d Limiting the use for publicity purposes of names of licensors or authors of the material or e Declining to grant rights under trademark law for use of some trade names trademarks or service marks or f Requiring indemnification of licensors and authors of that material by anyone who conveys the material or modified versions of it with contractual assumptions of liability to the recipient for any liability that these contractual assumptions directly impose on those licensors and authors All other non permissive additional terms are considered
76. e various timer features of the TV The current time will appear every time you press the INFO button If you disconnect the power cord you have to set the clock again L Time Clock Set Network Setup Child Lock On You can set the current time manually Change PIN You can set the day month year hour and minute directly by pressing the number buttons cp i ee on the remote control Time Q Sleep Timer Sleep Timer Off The sleep timer automatically shuts off the TV after a preset time 30 60 90 120 150 and 180 minutes a Press the TOOLS button to display the Tools menu You can also set the sleep timer by selecting Tools Sleep Timer To cancel the Sleep Timer function select Off amp Move C3 Enter 9 Return 1 Timer 1 Timer 2 Timer 3 Three different on off timer settings can be made You must set the clock first On Time _ Set the hour minute and activate inactivate OnTime To activate timer with the setting you ve chosen set to Activate Er G Off Time Set the hour minute and activate inactivate To activate timer with the setting you ve chosen set to Activate Volume Set the desired volume level Source TV USB TV Memory You can select the TV TV Memory or USB device content to be played when the TV turns on automatically Select TV TV Memory or USB Make sure that an USB device is connected to your TV When there is only one photo file in the USB or the TV memo
77. eakers e External Speaker Used to listen to the sound of the External Home Theatre Speakers e TV Speaker Used to listen to the sound of the TV Speakers The volume and MUTE buttons do not operate when the Speaker Select is set to External Speaker If you select External Speaker in the Speaker Select menu the sound settings will be limited Audio Out L R Out to Sound System RF AV Component PC HDMI TV Speaker Sound Output External Speaker Sound Output Video No Signal Mute LJ Sound Select Main Sub When the PIP feature is activated you can listen to the sound of the sub PIP picture You can select this option when PIP is set to On al Press the TOOLS button to display the Tools menu You can also set the sound of the sub picture by selecting Tools PIP Sound Select L Sound Reset Reset All Reset Sound Mode Cancel Gound Reset You can restore the Sound settings to the factory defaults Reset Sound Mode Current sound values return to default settings Cancel sound reset Reset All Reset Sound Mode 4 gt Move C Enter Return E Selecting the Sound Mode You can set the sound mode by pressing the DUAL button When you press it the current sound mode is displayed on the screen Audio Type Dual 1 2 Default o Mmo MONO Automatic ch A2 Stereo STEREO MONO naiiai DUAL 1 gt DUAL 2 DUAL 1 o Mm MONO Automatic ch NICAM MONO STEREO iiaiai Stereo MONO gt DUAL 1 Hog eal If the
78. eless network E Ifa wireless Access Point is not in the Access Point list press the Red button Wireless Network Setup E When the connection is made you will be returned to the screen automatically Security Key I E Ifyou have selected an Access Point with a security authentication The Security ra Number Key input screen appears Enter the security key and press the Blue button on S the remote control E If security encryption type is WEP 0 9 A F will be available when you input security key lt Move 0 9 Number C Enter 5S Return Connecting WPS Wi Fi Protected Setup e If Security Key is already set In access point list select WPS Wireless Network Setup You can select PBC PIN Security Key Select a network Search Security Ke Ad hoc vy Move C Enter Return Connecting by using PBC Select a PBC Push Button Configuration Press the PBC T button on the AP access point within 2minutes and wait for connection Access Point Name AP_1 Cancel Connecting by using PIN Select a PIN Personal Identification Number NA ea The message showing the PIN Code is displayed Input the PIN Code at AP Access Point Name AP_1 PIN Code 12345678 device within 2minutes Select OK and wait for connection Try again if connecting operation doesn t work When the connection is not established although tried again reset the access point Please refer to a manual of each access point Connect
79. ement This product includes cryptographic software written by Eric Young eay cryptsoft com The word cryptographic can be left out if the rouines from the library being used are not cryptographic related 4 lf you include any Windows specific code or a derivative thereof from the apps directory application code you must include an acknowledgement This product includes software written by Tim Hudson tjh cryptsoft com THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE The licence and distribution terms for any publically available version or derivative of this code cannot be changed i e this code cannot simply be copied and put under another distribution licence including the GNU Public Licence
80. enlarged file is not saved LC Background Music You can select background music when watching a Slide Show To use this feature there must be music and photo files stored on the USB device Loading music files is needed to change BGM mode Play music files in music category to load Background Music Off On e Off Background music is not played e On When the background music is available if you select On the music is played back BGM Mode Mood Selected File Shuffle You can select a mode to use for the background music BGM Mood Energetic Rhythmical Sad Exciting Calm Unclassified Music with the mood you selected is set as the background music If you set BGM Mode to Mood you can select a mood Select Music File 0 File s Selected Only the selected music file is set as the background music If you set BGM Mode to Selected File you can select a music file English 35 Q Picture Setting Sound Setting You can select the picture and sound settings Q Information The photo file information is displayed Q Remove Safely You can remove the device safely from the TV E Sorting the Music List You can sort music files in the Music List by a particular standard 1 Press the MEDIA P button 2 Press the lt or gt button to select Music then press the ENTER LC button 3 Press the A button to move to the Sort key Section 4 Press the lt or gt button to select a sorting standard Basi
81. ert T 63 RECOMMENDATIONS SIII Re alUNCrn tan ce a a gear 64 minstallingithe Stand oare eee aaae aa A eae seis eee cece 65 m Disconnectingithe stand 25s ee a eee ee eee ee 66 milstallingithe Ma MO K E nr 66 m Assemblingthe Cables nre n a eens eee 67 mAni iheftKensingtoml ock a cenet orcte cheese eee ee 68 m Securing the Installation Space eee eee eee eee eee eee eee 68 m Preparing before installing Wall MOunt ceccseseceesseeeeees 68 m Sec ring thie TV tothe Walk eee e 69 m Troubleshooting Before Contacting Service personnel 70 E Specifications ae e a a E ee A A E A 71 m GNU GENERAL PUBLIC LICENSE m END OF TERMS AND CONDITIONS m GNU Lesser General Public License LGPL m END OF TERMS AND CONDITIONS m LICENSE ISSUES Press English 1 SETTING UP YOUR TV Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance Product design and specifications may be changed without notice in order to enhance product performance E Viewing the Control Panel The product colour and shape may vary depending on the model The front panel buttons can be activated by touching them with your finger 7 Samsun 7 SOURCE re MENU VOLT v CH REMOTE CONTROL SENSOR Aim the remote control towards this spot on the TV POWER Press to turn the TV on and off V CH A Press to change channels In the on screen menu use the W CH A buttons as you
82. es are shown in order in each folder The photo file in the Root folder is shown first and the others are shown in alphabetical order by name 1 Preference wl ww l A A Sorts photos by preference Favourites You can change the photo preferences Changing the Favourites Settings Select the desired photo in the Photo list then press the Green button repeatedly until the desired setting appears Up to 3 stars can be selected The stars are for grouping purposes only For example the 3 star setting does not have any priority over the one star setting English 32 Photo List Option Menu LC LC LC Press the MEDIA P button Press the lt or gt button to select Photo then press the ENTER La button Press the lt or K button to select the desired photo file Selecting Multiple Photos Press the lt or gt button to select the desired photo file Then press the Yellow button Repeat the above operation to select multiple photo files The mark v appears to the selected photo file 4 Press the TOOLS button The option menu changes according to the current status Slide Show Using this menu you can play a SlideShow using the photo files on the USB memory device Copy Copy Current Group Copy the selected file When multiple files ae a ba Kae forcen are selected mm bey ny Sees Select a photo you want to copy Alternatively select multiple files by pressing the iii Yellow button Press the TOOLS butto
83. essed on the remote control the remote control buttons will be lit for a moment Using the remote control with the ON OFF 4 light button set to On will reduce the battery usage time PRE CH Enables you to return to the previous channel you were watching MENU Displays the main on screen menu FAV CH Used to display Favourites Channel Lists on the screen RETURN Returns to the previous menu D UPA DOWNVY LEFT lt RIGHT ENTERL4 Use to select on screen menu items and change menu values EXIT Press to exit the menu SOURCE Press to display and select the available video sources V P A Press to change channels CONTENT This function enables you to view the Content Library MEDIA P Allows you to play music files pictures and movies DUAL Sound effect selection P SIZE Picture size selection Teletext Functions C Exit from the Teletext display 5 Teletext store O Teletext size selection Fastext topic selection Alternately select Teletext Double or Mix Hl 9 Teletext reveal Teletext sub page Teletext index Teletext hold Teletext cancel W 9 9 Teletext mode selection T FLOF Teletext next page Teletext previous page 000000 T English 6 Mini Remote Control The Mini Remote Control is a simplified remote control that consists of the power channel and volume button
84. ettings and adjusts the frequency values and positions Auto ae eis al Press the TOOLS button to display the Tools menu You can also set the Auto Adjustment S ae by selecting Tools Auto Adjustment mie Onions This function does not work in DVI HDMI mode pe pouei Q Screen Coarse Fine The purpose of picture quality adjustment is to remove or reduce picture noise If the noise is Screen not removed by Fine tuning alone then adjust the frequency as best as possible Coarse and fers Fine tune again After the noise has been reduced readjust the picture so that it is aligned on Fine the centre of screen eae Image Reset PC Position Adjust the PC s screen positioning if it does not fit the TV screen Press the A or Y button to adjusting the Vertical Position Press the lt or gt button to adjust the Horizontal Position Move C Enter S Return Image Reset You can replace all image settings with the factory default values E Configuring the Sound Menu L Mode Standard Music Movie Clear Voice Custom a Press the TOOLS button to display the Tools menu You can also set the sound mode by selecting Tools Sound Mode QO Mode Custom Equalizer e Standard Selects the normal sound mode An u ae neat e Music Emphasizes music over voices Auto Volume e Movie Provides the best sound for movies S De e Clear Voice Emphasizes voice over other sounds Soud EE e Custom Recalls your c
85. evice USB1 USB2 Power Overload warning message is displayed while you are connecting or using a USB device the device may not be recognized or may malfunction Ss Ss Using the Remote Control Button in Media Play Menu Button Operations AlY lt gt Move the cursor and select an item Select the currently selected item While playing a slide show movie or music file ENTER Pressing the ENTER L button during play pauses the play Pressing the ENTER La button during pause resumes the play CHU Play or pause the Slide Show music or movie RETURN Return to the previous menu TOOLS Run various functions from the Photo Music and Movie menus E Stop the current slide show Music or Movie file aall Jump to previous group Jump to next group INFO Show file information MEDIA P Exit Media Play mode A PV EXIT TV Stop Media Play mode and Returns to TV mode English 30 Media Play Function This function enables you to view and listen to photo music and or movie files saved on a USB Mass Storage Class MSC device It might not work properly with unlicensed multimedia files Entering the Media Play USB amp DLNA Menu 1 Press the MENU button Press the A or Y button to select Application then press the ENTER C button 851 86MB 993 02MB Free y 2 Press the A or Y button to select Media Play USB amp DLNA then press the fag fe D G ENTERL4 button The Media Play USB amp DLNA menu is displa
86. files by the folder If there are many folders in USB the files are shown in order in each folder The music file in the Root folder is shown first and the others are shown in alphabetical order by name O Preference l k 00 A K A A Sorts music files by preference Favourites You can change the music files preferences Changing the Favourites Settings Select the desired music file in the Music list then press the Green button repeatedly until the desired setting appears Up to 3 stars can be selected The stars are for grouping purposes only For example the 3 star setting does not have any priority over the one star setting English 36 Music List Option Menu E LC LC Press the MEDIA P button Press the lt or gt button to select Music then press the ENTER L lt button Press the lt or gt button to select the desired Music file Selecting Multiple Music Files Press the lt or K button to select the desired music file Then press the 5 R RR levels Yellow button ies re 7 S Information Remove Safely Repeat the above operation to select multiple music files The mark v appears to the selected music file 4 Press the TOOLS button The option menu changes according to the current status Play Current Group Using this menu you can only play music files in the currently selected sorting group Copy Copy Current Group Copy the selected file When multiple files are selected Select
87. gal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work and you disclaim any intention to limit operation or modification of the work as a means of enforcing against the work s users your or third parties legal rights to forbid circumvention of technological measures Conveying Verbatim Copies You may convey verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice keep intact all notices stating that this License and any non permissive terms added in accord with section 7 apply to the code keep intact all notices of the absence of any warranty and give all recipients a copy of this License along with the Program You may charge any price or no price for each copy that you convey and you may offer support or warranty protection for a fee Conveying Modified Source Versions You may convey a work based on the Program or the modifications to produce it from the Program in the form of source code under the terms of section 4 provided that you also meet all of these conditions a The work must carry prominent notices stating that you modified it and giving a relevant date b The work must carry prominent notices stating that it is released under this License and any conditions added under
88. h are used unmodified in performing those activities but which are not part of the work For example Corresponding Source includes interface definition files associated with source files for the work and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require such as by intimate data communication or control flow between those subprograms and other parts of the work The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source The Corresponding Source for a work in source code form is that same work Basic Permissions All rights granted under this License are granted for the term of copyright on the Program and are irrevocable provided the stated conditions are met This License explicitly affirms your unlimited permission to run the unmodified Program The output from running a covered work is covered by this License only if the output given its content constitutes a covered work This License acknowledges your rights of fair use or other equivalent as provided by copyright law You may make run and propagate covered works that you do not convey without conditions so long as your license otherwise remains in force You may convey covered works to others for the sole purpose of having them make modifications exclusively for you or provide you with facilities for running those works provided that you com
89. h must display Appropriate Legal Notices however if the Program has interactive interfaces that do not display Appropriate Legal Notices your work need not make them do so A compilation of a covered work with other separate and independent works which are not by their nature extensions of the covered work and which are not combined with it such as to form a larger program in or on a volume of a storage or distribution medium is called an aggregate if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation s users beyond what the individual works permit Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate Conveying Non Source Forms You may convey a covered work in object code form under the terms of sections 4 and 5 provided that you also convey the machine readable Corresponding Source under the terms of this License in one of these ways a Convey the object code in or embodied in a physical product including a physical distribution medium accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange b Convey the object code in or embodied in a physical product including a physical distribution medium accompanied by a written offer valid for at least three years and valid for as long as you offer spare parts or customer support for that produ
90. hows the previous version that will be replaced or Software is represented as Year Month Day_Version The more recent the date the newer the software version Installing the latest version is recommended USB 1 HDD By USB Insert a USB drive containing the firmware upgrade downloaded from samsung com into the TV Please be careful to not disconnect the power or remove the USB drive while upgrades Software Upgrade are being applied The TV will turn off and turn on automatically after completing the firmware upgrade Please check the firmware version after the upgrades are complete the new version will have a higher number than the older version When software is upgraded video and audio firms settings you have made will return to their default factory settings We recommend you write Alternative Software 2009 01 16_000000 down your settings so that you can easily reset them after the upgrade USB Drive Alternative Software Backup If there is an issue with the new firmware and it is affecting operation you can change the software to the previous version If software was changed existing software is displayed You can change current software to alternative software by Alternative Software Move C8 Enter 5 Return LY HD Connection Guide This menu presents the connection method that provides the optimal quality for the HD TV Refer to this information when connecting external devices to the TV Q Contact Sa
91. icense Notwithstanding any other provision of this License you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work and to convey the resulting work The terms of this License will continue to apply to the part which is the covered work but the special requirements of the GNU Affero General Public License section 13 concerning interaction through a network will apply to the combination as such Revised Versions of this License The Free Software Foundation may publish revised and or new versions of the GNU General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies that a certain numbered version of the GNU General Public License or any later version applies to it you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation If the Program does not specify a version number of the GNU General Public License you may choose any version ever published by the Free Software Foundation If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used that proxy s public statement of acceptance of a version per
92. ile You can watch exciting gaming multimedia files but the gaming function is not ae are supported Pause ump 4 Tools eturn E English 40 Z Supported Subtitle Formats Name Format MPEG 4 time based text XML SAMI sm HTML SubRip st string based SubViewer sub string based Micro DVD string based E Supported Video Formats File Extention Video Decoder Audio codec iv 3 ODVK 8 11 11 MP3 AC3 LPCM ADPCM MULAW avi AVI ALAW MP3 AC3 LPCM ADPCM MULAW mkv MKV R TETE E WMA MP3 AC3 LPCM ADPCM ASF MULAW ALAW AAC gl Get ASE 4 ASP wmv VC1 Window Media Video v9 H 264 BP O H24MP O H24HW He HP mp4 MP4 SMP4 REG sp ADPCM HE AAC mp3 e 4 ASP Se H 264BP OC H 264MP 3gp 3GPP H 264 HP ADPCM HE AAC MPEG 4 SP MPEG 4 ASP MPEG2 vro ps VRO VOB MPEG AC3 MPEG LPCM mpg MPEG1 Programme Stream AC3 MPEG LPCM mpeg ps MPEG2 Programme Stream MPEG2 Eo a Stream others ts H 264 Transport H 264 Transport Stream AAC HE AAC MP3 DD VC Transport Stream Transport VC Transport Stream English 41 Video Play Control Buttons Button Operations ENTER L Play Pause the movie file gt Play the movie file m Pause the movie file TOOLS Run various functions from the Movie menus E Exit play mode and return to the movie list lt gt Skip forwards or backwards through the movie file A Y Move to the first last of the file
93. ill be switched within the selected channel list Added Ch Channels will be switched within the memorized channel list Favourite Ch Channels will be switched within the favourite channel list Q Fine Tune If the reception is clear you do not have to fine tune the channel as this is done automatically during the search and store operation If the signal is weak or distorted you may have to fine tune the channel manually Fine tuned channels that have been saved are marked with an asterisk on the right hand side of the channel number in the channel banner To reset the fine tuning select Reset by pressing the A or Y button and then press the ENTER L button Only TV channels can be fine tuned English 10 Managing Channels Using this menu you can add delete or set favourites channels All Channels Shows all currently available channels Added Channels Shows all added channels sj uuey9 peppy w y Qi ear EA CICS C3 CICI foi O R EA ep 1 1 1 1 1 1 1 H hoo 4 5 6 7 8 9 1 0 Favourites be EN Shows all favourite channels To select the favourites channels you have set up press the FAV CH button on the remote control Programmed Shows all current reserved programmes Select a channel in the All Channels Added Channels or Favourites screen by pressing the A Y buttons and pressing the ENTER LY button Then you can watch the selected channel Using the Colour buttons with the Channel
94. indow while watching TV To disable this Message alarm window set Message to Off in Setup of the Home Network Centre E The alarm window appears for 20 seconds If no key is pressed or if Cancel is selected it appears up to three times at 5 minute intervals If OK is selected or if OK is not selected while the message is displayed three times the message will be deleted The message is not deleted from the mobile phone E The simple alarm window can be displayed while using some applications such as Media Play Content Library etc In this case to view the contents of the message switch to TV viewing mode E When the message of an unknown mobile phone is displayed select the mobile phone in the Message item of the Home Network Centre and select Denied to block the phone Message View If a new test message SMS arrives while you are watching TV the alarm window appears If you click the OK button the contents of the message are displayed e If you select the OK button the contents of the message are displayed e Ifyou select the Cancel button the alarm window appears up to three times at 5 minute intervals E You can configure the viewing settings for the text message SMS contents on the mobile phone For the procedures refer to the mobile phone manual E Some special characters may be displayed as blank or broken characters Call Arrival Alarm If a call arrives while you are watching TV the alarm window
95. ing by using Security Key When selecting Security Key the input window Wireless Network Setup is displayed Input the security key and press Blue button Security Key E Try again if connecting operation doesn t work G 0 8 Number Lowercase Delete D K B Done d E L S VA B B W CY Move 0 9 Number C2 Enter 5 Return e f Security Key is not set When the security setting of AP that supports WPS is NONE Wireless Network Setup you can select PBC PIN None Security None Security is capable of connecting to AP aan directly without using WPS function E Process of PBC PIN is same as above Refer to if Security Key is already set Try again if connecting operation doesn t work a Ati OD eae Move C Enter 5 Return English 26 Ad hoc You can connect to a mobile device without an access point through the Samsung Wireless LAN Adapter by using a peer to peer network How to connect to new Ad hoc 1 Choose Select a network then a device list is displayed 2 While in the device list press the Blue button on the remote or select Ad hoc V R R R R The message The existing network system may have limited __ ae eter ay ere TT functionality Do you want to change the network connection is nine reli Douven t hinge Tenisa displayed connection 3 Input the generated Network Name SSID and Security Key into the device you want to connect How to connect an existing Ad hoc device
96. is an SSL implementation written by Eric Young eay cryptsoft com The implementation was written so as to conform with Netscapes SSL This library is free for commercial and non commercial use as long as the following conditions are aheared to The following conditions apply to all code found in this distribution be it the RC4 RSA Ihash DES etc code not just the SSL code The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson tjh cryptsoft com Copyright remains Eric Young s and as such any Copyright notices in the code are not to be removed If this package is used in a product Eric Young should be given attribution as the author of the parts of the library used This can be in the form of a textual message at program startup or in documentation online or textual provided with the package Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledg
97. is not conveying An interactive user interface displays Appropriate Legal Notices to the extent that it includes a convenient and prominently visible feature that 1 displays an appropriate copyright notice and 2 tells the user that there is no warranty for the work except to the extent that warranties are provided that licensees may convey the work under this License and how to view a copy of this License If the interface presents a list of user commands or options such as a menu a prominent item in the list meets this criterion 39 tt Licensees 1 Source Code The source code for a work means the preferred form of the work for making modifications to it Object code means any non source form of a work A Standard Interface means an interface that either is an official standard defined by a recognized standards body or in the case of interfaces specified for a particular programming language one that is widely used among developers working in that language The System Libraries of an executable work include anything other than the work as a whole that a is included in the normal form of packaging a Major Component but which is not part of that Major Component and b serves only to enable use of the work with that Major Component or to implement a Standard Interface for which an implementation is available to the public in source code form A Major Component in this context me
98. is product uses parts of the software owned by the Freetype Project www freetype org e This product uses some software programs which are distributed under the GPL LGPL license Accordingly the following GPL and LGPL software source codes that have been used in this product can be provided after asking to viswmanager samsung com GPL software Linux Kernel Busybox Binutils LGPL software Glibc ffmpeg smpeg libgphoto libusb SDL B GNU GENERAL PUBLIC LICENSE Version 3 29 June 2007 Copyright C 2007 Free Software Foundation Inc lt http fsf org gt Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The GNU General Public License is a free copyleft license for software and other kinds of works The licenses for most software and other practical works are designed to take away your freedom to share and change the works By contrast the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program to make sure it remains free software for all its users We the Free Software Foundation use the GNU General Public License for most of our software it applies also to any other work released this way by its authors You can apply it to your programs too When we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to d
99. ised and or new versions of the GNU General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies that a certain numbered version of the GNU General Public License or any later version applies to it you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation If the Program does not specify a version number of the GNU General Public License you may choose any version ever published by the Free Software Foundation If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used that proxy s public statement of acceptance of a version permanently authorizes you to choose that version for the Program Later license versions may give you additional or different permissions However no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version 15 Disclaimer of Warranty THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE
100. istribute copies of free software and charge for them if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to prevent others from denying you these rights or asking you to surrender the rights Therefore you have certain responsibilities if you distribute copies of the software or if you modify it responsibilities to respect the freedom of others For example if you distribute copies of such a program whether gratis or for a fee you must pass on to the recipients the same freedoms that you received You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights Developers that use the GNU GPL protect your rights with two steps 1 assert copyright on the software and 2 offer you this License giving you legal permission to copy distribute and or modify it For the developers and authors protection the GPL clearly explains that there is no warranty for this free software For both users and authors sake the GPL requires that modified versions be marked as changed so that their problems will not be attributed erroneously to authors of previous versions Some devices are designed to deny users access to install or run modified versions of the software inside them although the manufacturer can do s
101. k gateway and DNS are automatically allocated when DHCP is selected you do not have to enter them manually 1 Connect the LAN port on the rear panel of the TV and the external modem with a LAN Cable 2 Connect the Modem on the wall and the external modem with a Modem Cable External Modem TV Rear Panel ADSL VDSL Cable TV The Modem Port on the Wall LAN Cable The Modem Port on the Wall External Modem TV Rear Panel ADSL VDSL Cable TV IP Sharer Modem Cable LAN Cable LAN Cable English 22 You can connect the LAN port and the TV directly depending on your network status TV Rear Panel The LAN Port on the Wall Rye G AUDIO LAN Cable The terminals the position of the port and the type of the external device may differ depending on the manufacturer If the IP address allocation by the DHCP server has failed turn the external modem off turn it on again after at least 10 seconds and then try again For the connections between the external modem and the Sharer Router refer to the owner s manual of the corresponding product You can connect the TV to the LAN directly without connecting it through a Sharer Router You cannot use a manual connection type ADSL modem because it does not support DHCP You have to use an automatic connection type ADSL modem ESTES Ss S fS LAN Connection for Static IP Environment The procedures to set u
102. lay Modes If Screen Fit is selected in some external devices the damaged picture may appear in the corner of the screen This symptom is caused by external devices not TV This appears when you press and hold the EXIT button for a while The product settings are reset to the factory defaults This is part of the product s design and is not a defect This TFT LED panel uses a panel consisting of sub pixels 6 220 800 which require sophisticated technology to produce However there may be few bright or dark pixels on the screen These pixels will have no impact on the performance of the product English 70 Specifications Model Name UA55B8000 Screen Size Optimum 1920 x 1080 60 Hz 1920 x 1080 60 Hz Sound Dimensions WxDxH Without Stand 1131 X 31 X 688 mm 1322 X 30 X 797 mm With stand 1131 X 277 X 757 mm 1322 X 307 X 860 mm Weight With Stand 24 kg 29 ko Environmental Considerations Operating Temperature 10 C to 40 C 50 F to 104 F Operating Humidity 10 to 80 non condensing Storage Temperature 20 C to 45 C 4 F to 113 F Storage Humidity 5 to 95 non condensing Stand Swivel Left Right 20 20 Design and specifications are subject to change without prior notice This device is a Class B digital apparatus For the power supply and Power Consumption refer to the label attached to the product English 71 e This product uses parts of the software from the Independent JPEG Group e Th
103. le legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it or c Prohibiting misrepresentation of the origin of that material or requiring that modified versions of such material be marked in reasonable ways as different from the original version or d Limiting the use for publicity purposes of names of licensors or authors of the material or e Declining to grant rights under trademark law for use of some trade names trademarks or service marks or f Requiring indemnification of licensors and authors of that material by anyone who conveys the material or modified versions of it with contractual assumptions of liability to the recipient for any liability that these contractual assumptions directly impose on those licensors and authors All other non permissive additional terms are considered further restrictions within the meaning of section 10 If the Program as you received it or any part of it contains a notice stating that it is governed by this License along with a term that is a further restriction you may remove that term If a license document contains a further restriction but permits relicensing or conveying under this License you may add to a covered work material governed by the terms of that license document provided that the further restriction does not survive such relicensing or conveying If you add terms to a covered work in accord with thi
104. lects the picture for increased definition in a bright room Advanced Settings Standard Selects the picture for the optimum display in a normal environment Natural Selects the picture for an optimum and eye comfortable display This function is not available in PC mode Movie Selects the picture for viewing movies in a dark room Q Backlight Contrast Brightness Sharpness Colour Tint G R R Backlight eee 7 Your television has several setting options that allow you to control the picture quality Backlight Move 4 Adjust 3 Enter 5 Return Adjusts the brightness of LED back light Contrast Adjusts the contrast level of the picture Brightness Adjusts the brightness level of the picture Sharpness Adjusts the edge definition of the picture Colour Adjusts colour saturation of the picture Tint G R Adjusts the colour tint of the picture In TV AV modes of the PAL system you cannot use the Tint G R Function When you make changes to Backlight Contrast Brightness Sharpness Colour or Tint G R the OSD will be adjusted accordingly In PC mode you can only make changes to Backlight Contrast and Brightness Settings can be adjusted and stored for each external device you have connected to an input of the TV The energy consumed during use can be significantly reduced if the brightness level of the picture is lowered which will reduce the overall running cost CS fS English 13 Q
105. lementation available to the public in source code form and must require no special password or key for unpacking reading or copying Additional Terms Additional permissions are terms that supplement the terms of this License by making exceptions from one or more of its conditions Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License to the extent that they are valid under applicable law If additional permissions apply only to part of the Program that part may be used separately under those permissions but the entire Program remains governed by this License without regard to the additional permissions When you convey a copy of a covered work you may at your option remove any additional permissions from that copy or from any part of it Additional permissions may be written to require their own removal in certain cases when you modify the work You may place additional permissions on material added by you to a covered work for which you have or can give appropriate copyright permission Notwithstanding any other provision of this License for material you add to a covered work you may if authorized by the copyright holders of that material supplement the terms of this License with terms a Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License or b Requiring preservation of specified reasonab
106. ll Samsung Wireless LAN Adapter m CD HDMIIN LAN Cable 1 Connect the Samsung Wireless LAN Adapter into the USB1 HDD or USB2 terminal of the TV StS E You must use the Samsung Wireless LAN Adapter WISOQ9ABGN to use a wireless network Samsung s Wireless LAN adapter is sold separately The WISO9ABGN Wireless LAN adapter is offered by select retailers Ecommerce sites and Samsungparts com To use a wireless network your TV must be connected to a wireless IP sharer If the wireless IP sharer supports DHCP your TV can use a DHCP or static IP address to connect to the wireless network Samsung s Wireless LAN adapter supports IEEE 802 11A IEEE 802 11B IEEE 802 11G IEEE 802 11N When you play DLNA video over IEEE 802 11B G connection the video may not be played smoothly If the wireless IP sharer allows you to turn the Ping connection function on off turn it on Select a channel for the wireless IP sharer that is not currently being used If the channel set for the wireless IP sharer is currently being used by another device nearby this will result in interference and communications may fail If you apply a security system other than the systems listed blow it will not work with the TV When applying the security key for the AP wireless IP sharer only the following is supported 1 Authentication Mode OPEN SHARED WPAPSK WPA2PSK 2 Encryption Type WEP TKIP AES When applying the sec
107. manently authorizes you to choose that version for the Program Later license versions may give you additional or different permissions However no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version 15 Disclaimer of Warranty THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 16 Limitation of Liability INNO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MODIFIES AND OR CONVEYS THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES ORA FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAG
108. me of the Input mode When connecting an HDMI DVI cable to the HDMI IN 1 DVI port you should set the HDMI1 DVI mode to DVI or DVI PC in the Edit Name of the Input mode In this case a separate sound connection is required a Support Menu L Product Guide The Product Guide gives you information on the most important features of this TV Product Guide l The descriptions provided by this function are in English only Self Diagnosis Software Upgrade Picture Quality Full HD 1080p HD Connection Guide Mega Contrast ace is 200Hz Motion Plus Picture Mode Medi 2 0 Internet TV Content Service Content Library Flash USB2 0 Movie DLNA Wireless Eco Friendly Energy Saving Mode Eco Material Using the Remote Control Buttons in the Product Guide Menu Button Operations Yellow Button Shows the contents of the Product Guide sequentially Auto Play lt gt Move the cursor and select an item ENTER L Select the currently selected item RETURN Return to the previous menu EXIT Stop the current function and return to the Product Guide main menu English 28 Q Self Diagnosis Picture Test Self Diagnosis If you think you have a picture problem perform the picture test Check the colour pattern on the screen to see if the problem still exists S e Yes If the test pattern does not appear or there is noise in the test pattern select Yes There may be a problem with the TV Therefore contact Samsung s call centre for Move E
109. more identifiable patents in that country that you have reason to believe are valid If pursuant to or in connection with a single transaction or arrangement you convey or propagate by procuring conveyance of a covered work and grant a patent license to some of the parties receiving the covered work authorizing them to use propagate modify or convey a specific copy of the covered work then the patent license you grant is automatically extended to all recipients of the covered work and works based on it A patent license is discriminatory if it does not include within the scope of its coverage prohibits the exercise of or is conditioned on the non exercise of one or more of the rights that are specifically granted under this License You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software under which you make payment to the third party based on the extent of your activity of conveying the work and under which the third party grants to any of the parties who would receive the covered work from you a discriminatory patent license a in connection with copies of the covered work conveyed by you or copies made from those copies or b primarily for and in connection with specific products or compilations that contain the covered work unless you entered into that arrangement or that patent license was granted prior to 28 March 2007 Nothing in this License
110. msung View this information when your TV does not work properly or when you want to upgrade the software You can view the information regarding the call centre product and software file download method English 29 MEDIA PLAY USB amp DLNA B Connecting a USB Device 1 Press the POWER button to turn the TV on TV Side Panel 2 Connect a USB device containing photo music and or movie files to the USB1 HDD or USB2 jack on the side of the TV 3 When the Application selection screen is displayed press the ENTER L button to select Media Play USB amp DLNA MTP Media Transfer Protocol is not supported The file system supports FAT16 FAT32 and NTFS Certain types of USB Digital camera and audio devices may not be compatible with this TV Media Play only supports USB Mass Storage Class devices MSC MSC is a Mass Storage Class Bulk Only Transport device Examples of MSC are Thumb drives Flash Card Readers and USB HDD USB HUB are not supported mre PHOTO Please connect directly to the USB port of your TV If you are using a separate Q cable connection there may be a USB compatibility problem USR 7 900 GSC USB Drive Ss 851 86MB 993 02MB Free E E Before connecting your device to the TV please back up your files to prevent E P them from damage or loss of data SAMSUNG is not responsible for any data bod file damage or data loss Photo Music Movie Setup E Connect a USB HDD to the dedicated po
111. n the overscan function E When Double WE mm mode has been set in PIP the Picture Size cannot be set Digital NR Off Low Medium High Auto If the broadcast signal received by your TV is weak you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen When the signal is weak select one of the other options until the best picture is displayed HDMI Black Level Normal Low You can directly select the black level on the screen to adjust the screen depth This function is active only when the external input connects to HDMI RGB signals Film Mode Off Auto1 Auto2 The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality Film Mode is supported in TV AV COMPONENT 480i 1080i and HDMI 480i 1080i e Off Turn the Film Mode function off e Auto Automatically adjusts the picture for the best quality when watching a film e Auto2 Automatically optimizes the video text on the screen not including closed captions when watching a film Ss English 15 200Hz Motion Plus Off Clear Standard Smooth Custom Demo Removes drag from fast scenes with a lot of movement to provide a clearer picture If you enable 200Hz Motion Plus noise may appear on the screen If this occurs set 200Hz Motion Plus to Off Off Switches 200Hz Motion Plus off Clear Sets 200Hz Motion Pl
112. n the unmodified Program The output from running a covered work is covered by this License only if the output given its content constitutes a covered work This License acknowledges your rights of fair use or other equivalent as provided by copyright law You may make run and propagate covered works that you do not convey without conditions so long as your license otherwise remains in force You may convey covered works to others for the sole purpose of having them make modifications exclusively for you or provide you with facilities for running those works provided that you comply with the terms of this License in conveying all material for which you do not control copyright Those thus making or running the covered works for you must do so exclusively on your behalf under your direction and control on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you Conveying under any other circumstances is permitted solely under the conditions stated below Sublicensing is not allowed section 10 makes it unnecessary Protecting Users Legal Rights From Anti Circumvention Law No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996 or similar laws prohibiting or restricting circumvention of such measures When you convey a covered work you waive any le
113. n to select Copy or Copy Current Group Copy the selected file The files on the USB device are saved to the TV memory You can only copy the files saved on the USB device When the TV memory is full files cannot be copied Q Delete Delete All Delete Selected File When multiple files are selected Select the file to delete Alternatively select multiple files by pressing the Yellow button Press the TOOLS button to select Delete or Delete All Delete Selected File The files are deleted You can only delete the files saved in the TV memory You cannot recover a deleted file LC Deselect All When at least one file is selected You can deselect all files The Y mark indicating the corresponding file is selected is hidden LC Information The movie file information including the name the size the date modified and the path is displayed Press the INFO button to viewing the information Q Remove Safely You can remove the device safely from the TV Playing a Movie File Playing a movie file 1 Press the Y button to select the File List Section g 00 00 01 00 05 30 7 2 Pressing the lt or gt button to select a movie file to be played sel 3 Press the Play ENTERL button The selected file is played The selected file is displayed at the top with its playing time The playing duration of a movie file may be displayed as 00 00 00 if its playing time information is not found at the start of the f
114. n to select Copy or Copy Current Group Copy the selected file The files on the USB device are saved to the TV memory You can only copy the files saved on the USB device When the TV memory is full files cannot be copied Delete Delete All Delete Selected File When multiple files are selected Select a photo to delete Alternatively select multiple files by pressing the Yellow button Press the TOOLS button to select Delete or Delete All Delete Selected File The files are deleted You can only delete the files saved in the TV memory You cannot recover a deleted file Play Current Group Using this menu you can play a SlideShow using only the photo files in the currently selected sorting group Change Group When the Sort key is the Colour You can change a selected photo file s or group of files colour information in order to move it from one colour group to another This does not change the actual colour of the photo The group information of the current file is updated and the photos are moved to the new colour group To change the information of multiple files select the files you want by pressing the Yellow button Deselect All When at least one file is selected You can deselect all files The Y mark indicating the corresponding file is selected is hidden Information The photo file information including the name the size the resolution the date modified and the path is displayed You can view the
115. nal input mode by pressing the SOURCE button you cannot use the Anynet function Make sure to switch to an Anynett device by using the Device List Ss Ss Anynett Menu The Anynet menu changes depending on the type and status of the Anynett devices connected to the TV Anynet Menu Description View TV Anynett mode changes to TV broadcast mode Device List Shows the Anynet device list Shows the connected device menus E g If a DVD recorder is connected the disc menu of the DVD recorder will appear Shows the play menu of the connected device E g If a DVD recorder is connected the play menu of the DVD recorder will appear Starts recording immediately using the recorder This is only available for devices that support the recording function Stop Recording recorder Stops recording Receiver Sound is played through the receiver device_name MENU device_name INFO Recording recorder If more than one recording device is connected they are displayed as recorder and if only one recording device is connected it will be represented as device name English 51 TV Remote Control Buttons Available in Anynett Mode Device Type Operating Status Available Buttons After switching to the device when the Numeric buttons menu of the corresponding device is A V lt gt ENTER L4 buttons Anynett Device displayed on the screen Colour buttons EXIT button After switching to the device while playing
116. now the number of the channel to be stored Press the A or Y button to select C Air channel or S Cable channel Press the K button then press the A Y or number 0 9 buttons to select the required number You can also select the channel number directly by pressing the number 0 9 buttons If there is abnormal sound or no sound reselect the sound standard required e Search When you do not know the channel numbers Press the A or Y button to start the search The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen e Store When you store the channel and associated programme number Set to OK by pressing the ENTER L button Channel mode P Programme mode When completing tuning the broadcasting stations in your area have been assigned to position numbers from P00 to P99 You can select a channel by entering the position number in this mode C Air channel mode You can select a channel by entering the assigned number to each air broadcasting station in this mode S Cable channel mode You can select a channel by entering the assigned number for each cable channel in this mode LJ Channel List For detailed procedures on using the Channel List refer to the Managing Channels instructions refer to pages 11 12 You can select these options by simply pressing the CH LIST button on the remote control Q Channel Mode When press the P W A button Channels w
117. nter 2 Return assistance e No If the test pattern is properly displayed select No There may be a problem with your external equipment Please check your connections If the problem still persists refer to the external device s user manual Sound Test If you think you have a sound problem please perform the sound test You can check the sound by playing a built in melody sound through the TV If you hear no sound from the TV s speakers before performing the sound test make sure Speaker Select is set to TV speaker in the Sound menu E The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button e Yes If during the sound test you can hear sound only from one speaker or not at all select Yes There may be a problem with the TV Therefore contact Samsung s call centre for assistance e No If you can hear sound from the speakers select No There may be a problem with your external equipment Please check your connections If the problem still persists refer to the external device s user manual Q Software Upgrade Samsung may offer upgrades for the TV s firmware in the future These upgrades can be TV Side Panel performed via the TV when it is connected to the Internet or by downloading the new firmware from samsung com to a USB memory device Current Version is the software already installed in the TV E Alternative Software Backup s
118. nynett device does not play The connected device is not displayed The TV programme cannot be recorded i Troubleshooting for Anynett Possible Solution Check if the device is an Anynett device The Anynett system supports Anynett devices only Connect only one receiver home theatre Check if the Anynett device power cord is properly connected Check the Anynet device s Video Audio HDMI 1 3 cable connections Check whether Anynet HDMI CEC is set to On in the Anynett setup menu Check whether the TV remote control is in TV mode Check whether it is Anynet exclusive remote control Anynet doesn t work in certain situations Searching channels Operating Media Play Plug amp Play etc When connecting or removing the HDMI 1 3 cable please make sure to search devices again or turn your TV off and on again Check if the Anynett Function of Anynett device is set on Check if the Anynet device is properly connected to the TV and check if the Anynett HDMI CEC is set to On in the Anynett Setup menu Press the TV button on the TV remote control to switch to TV Then press the TOOLS button to show the Anynett menu and select a menu you want Select View TV in the Anynett menu Press the SOURCE button on the TV remote control and select a device other than Anynet devices Press P V A PRE CH and FAV CH to change the TV mode Note that the channel button operates only when a tuner embedded Anynett device is no
119. o This is fundamentally incompatible with the aim of protecting users freedom to change the software The systematic pattern of such abuse occurs in the area of products for individuals to use which is precisely where it is most unacceptable Therefore we have designed this version of the GPL to prohibit the practice for those products If such problems arise substantially in other domains we stand ready to extend this provision to those domains in future versions of the GPL as needed to protect the freedom of users Finally every program is threatened constantly by software patents States should not allow patents to restrict development and use of software on general purpose computers but in those that do we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary To prevent this the GPL assures that patents cannot be used to render the program non free The precise terms and conditions for copying distribution and modification follow TERMS AND CONDITIONS 0 Definitions This License refers to version 3 of the GNU General Public License Copyright also means copyright like laws that apply to other kinds of works such as semiconductor masks The Program refers to any copyrightable work licensed under this License Each licensee is addressed as you and recipients may be individuals or organizations To modify a work means to copy from or adapt all or par
120. oftware under which you make payment to the third party based on the extent of your activity of conveying the work and under which the third party grants to any of the parties who would receive the covered work from you a discriminatory patent license a in connection with copies of the covered work conveyed by you or copies made from those copies or b primarily for and in connection with specific products or compilations that contain the covered work unless you entered into that arrangement or that patent license was granted prior to 28 March 2007 Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law No Surrender of Others Freedom If conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not convey it at all For example if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program Use with the GNU Affero General Public L
121. ollow the steps below to learn how to navigate the menu in order to select and adjust different functions ec prec wenveuten_ E om S rerurn Button ENTER 2 DIRECTION Buttons T i a Tent Display the main on screen menu Move the cursor and select an__ item Select the currently selected item Confirm the setting EXIT Exit the on screen menu X Q Operation the OSD On Screen Display The access step may differ depending on the selected menu S CH LIS y 1 Press the MENU button VEU eaey KE Mode 2 The main menu appears on the screen The menu s left side has icons Picture Sound Channel Setup Input Application Support Backlight Contrast Brightness Sharpness Colour Advanced Settings 3 Press the A or Y button to select one of the icons Then press the ENTER L button to access the icon s sub menu Press the A or Y button to select the icon s submenu i Backlight Contrast Brightness Sharpness Colour Advanced Settings Picture Options 6 Press the lt or K button to decrease or increase the value of a particular item The U adjustment OSD may differ depending on the selected menu ded S E Y 7 Press the ENTER L lt button to complete the configuration Press the EXIT button to exit Move lt gt Adjust C4 Enter Return Help icon English 8 Placing Your Television in Standby Mode Your set can be placed in standby mode in order to reduce the power consumpti
122. on The standby mode can be useful when you wish to interrupt viewing temporarily during a meal for example 1 Press the POWER button on the remote control The screen is turned off and a standby indicator appears on your set 2 To switch your set back on simply press the POWER button again Do not leave your set in standby mode for long periods of time when you are away on holiday for example It is best to unplug the set from the mains and aerial L Plug amp Play Feature When the TV is initially powered on basic settings proceed automatically and subsequently 1 Press the POWER 5 button on the remote control You can also use the POWER 5 button on the TV The message Select the OSD Language is displayed 2 Press the ENTER L lt button Press the A or Y button to select the language then press Plug amp Play the ENTERL button The message Select Home Use when installing this TV in your Select the OSD Language home is displayed 3 Press the lt or gt button to select Store Demo or Home Use then the ENTER L 20 button E We recommend setting the TV to Home Use mode for the best picture in your home C Enter environment E Store Demo mode is only intended for use in retail environments E Ifthe unit is accidentally set to Store Demo mode and you want to return to Home Use Standard Press the volume button on the TV When the volume OSD is displayed press and hold the MENU button on the TV for 5 se
123. on may not be supported depending on your external device English 14 Q Picture Options In PC mode you can only make changes to the Colour Tone and Size from among the Picture Options items in Picture Options Saas NER Size 16 9 Colour Tone Cool Normal Warm1 Warm2 Warm3 Digital NR Auto Warm1 Warm2 or Warm3 is only activated when the picture mode is Movie E C Settings can be adjusted and stored for each external device you have connected to an 200H2 Motion Plus Standard input of the TV Blue Only Mode Of Size Move C Enter 5 Return Occasionally you may want to change the size of the image on your screen Your TV comes with several screen size options each designed to work best with specific types of video input Your cable box satellite receiver may have its own set of screen sizes as well In general though you should view the TV in 16 9 mode as much as possible a Press the TOOLS button to display the Tools menu You can also set the size by selecting Tools Picture Size Alternately you can press the P SIZE button on the remote control repeatedly to change the picture size e 16 9 Adjusts the picture size to 16 9 appropriate for DVDs or wide broadcasting Wide Zoom Magnify the size of the picture more than 4 3 Zoom Magnifies the 16 9 wide picture in the vertical direction to fit the screen size 4 3 This is the default setting for a video movie or normal broadcasting Screen Fit Use the fun
124. ontent saved on a DLNA server usually your PC connected to your TV or over a network to be played Media Play enables playing content saved on a USB memory device connected to the TV while DLNA enables playing content saved on a DLNA server your PC connected to your TV or over the network The procedures to use the content are the same as those for Media Play USB amp DLNA If you install the PC share manager Programme supplied with the TV onto a PC you can have the PC perform the role of a DLNA server over the network E For detailed procedures on using the DLNA menu refer to the Media Play instructions refer to page 30 1 Press the MEDIA P button on the remote control to display the DLNA menu 2 Press the lt or K button to select an icon Photo Music Movie Setup then press the ENTER L button To exit DLNA mode press the MEDIA P button on the remote control DLNA does not support the following functions The Background Music and Background Music Setting functions Sorting files by preference in the Photo Music and Movie folders The Change Group Info function The Copy Delete function The Remove Safely function The REW FF lt gt gt key functions while a movie is playing Playing Movie Continuously Resume Play function The Skip function may not work with some container such as asf and mkv The Divx DRM Multi audio embedded caption does not supported Samsung PC Share manager
125. onvey the machine readable Corresponding Source under the terms of this License in one of these ways a Convey the object code in or embodied in a physical product including a physical distribution medium accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange b Convey the object code in or embodied in a physical product including a physical distribution medium accompanied by a written offer valid for at least three years and valid for as long as you offer spare parts or customer support for that product model to give anyone who possesses the object code either 1 a copy of the Corresponding Source for all the software in the product that is covered by this License on a durable physical medium customarily used for software interchange for a price no more than your reasonable cost of physically performing this conveying of source or 2 access to copy the Corresponding Source from a network server at no charge c Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source This alternative is allowed only occasionally and noncommercially and only if you received the object code with such an offer in accord with subsection 6b d Convey the object code by offering access from a designated place gratis or for a charge and offer equivalent access to the Corresponding Source in the same way through the same place at
126. or other external input sources such as DVD Blu ray players Cable Box Satellite receivers Set Top Box connected to the TV Use to select the input source of your choice Press the SOURCE button on the remote control to view an external signal source TV mode can be selected by pressing the TV button TV AV Component PC HDMI1 DVI HDMI2 HDMI3 HDMI4 USB E You can choose only those external devices that are connected to the TV In the Source List connected inputs will be highlighted and sorted to the top Inputs that are not connected will be sorted to the bottom Source List E If USB devices are connected to the USB1 HDD and USB2 jacks they are displayed as USB1 and USB2 in order PC always stays activated aoe E Using the Colour buttons on the remote with the Source list Red Refresh Refreshes the connected external devices Press this if your Source is on and connected but does not appear in the list TOOLS Tools Displays the Edit Name and Information menus R Source List Edit Name a Refresh 1 Tools Q Edit Name VCR DVD Cable STB Satellite STB PVR STB AV Receiver Game Camcorder PC DVI DVI PC TV IPTV Blu ray HD DVD DMA Name the device connected to the input jacks to make your input source selection easier When a PC with a resolution of 1920 x 1080 60HZz is connected to the HDMI IN 1 DVI port you should set the HDMI1 DVI mode to DVI PC in the Edit Na
127. or written permission please contact openssl core openssl org 5 Products derived from this software may not be called OpenSSL nor may OpenSSL appear in their names without prior written permission of the OpenSSL Project 6 Redistributions of any form whatsoever must retain the following acknowledgment This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE This product includes cryptographic software written by Eric Young eay cryptsoft com This product includes software written by Tim Hudson tjh cryptsoft com Original SSLeay License Copyright C 1995 1998 Eric Young eay cryptsoft com All rights reserved This package
128. ork thus licensed is called the contributor s contributor version A contributor s essential patent claims are all patent claims owned or controlled by the contributor whether already acquired or hereafter acquired that would be infringed by some manner permitted by this License of making using or selling its contributor version but do not include claims that would be infringed only as a consequence of further modification of the contributor version For purposes of this definition control includes the right to grant patent sublicenses in a manner consistent with the requirements of this License Each contributor grants you a non exclusive worldwide royalty free patent license under the contributor s essential patent claims to make use sell offer for sale import and otherwise run modify and propagate the contents of its contributor version In the following three paragraphs a patent license is any express agreement or commitment however denominated not to enforce a patent such as an express permission to practice a patent or covenant not to sue for patent infringement To grant such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party If you convey a covered work knowingly relying on a patent license and the Corresponding Source of the work is not available for anyone to copy free of charge and under the terms of this License through a
129. ot be used to render the program non free The precise terms and conditions for copying distribution and modification follow TERMS AND CONDITIONS 0 Definitions This License refers to version 3 of the GNU General Public License Copyright also means copyright like laws that apply to other kinds of works such as semiconductor masks The Program refers to any copyrightable work licensed under this License Each licensee is addressed as you and recipients may be individuals or organizations To modify a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission other than the making of an exact copy The resulting work is called a modified version of the earlier work or a work based on the earlier work A covered work means either the unmodified Program or a work based on the Program To propagate a work means to do anything with it that without permission would make you directly or secondarily liable for infringement under applicable copyright law except executing it on a computer or modifying a private copy Propagation includes copying distribution with or without modification making available to the public and in some countries other activities as well To convey a work means any kind of propagation that enables other parties to make or receive copies Mere interaction with a user through a computer network with no transfer of a copy
130. ovies files are shown in order in each folder The movie file in the Root folder is shown first and the others are shown in alphabetical order by name Preference w kewk kk Sorts movies by preference Favourites You can change the movie preferences Changing the Favourites Settings Select the desired movie file in the movie list then press the Green button repeatedly until the desired setting appears Up to 3 stars can be selected The stars are for grouping purposes only For example the 3 star setting does not have any priority over the one star setting LC English 39 Movie List Option Menu Press the MEDIA P button Press the lt or gt button to select Movie then press the ENTER La button Press the lt or gt button to select the desired Movie file Selecting Multiple Movie Files Press the lt or K button to select the desired movie file Then press the atest Yellow button m Remove Safely Repeat the above operation to select multiple movie files The mark v appears to the selected movie file 4 Press the TOOLS button The option menu changes according to the current status LC Play Current Group Using this menu you can only play movie files in the currently selected sorting group LC Copy Copy Current Group Copy the selected file When multiple files are selected Select the movie to copy Alternatively select multiple files by pressing the Yellow button Press the TOOLS butto
131. p Subnet Mask Gateway 3 Set Internet Protocol Setup to Manual DNS Server 4 Setup IP Address Subnet Mask Gateway and DNS Server Move CC Select 5S Return Press the number buttons on the remote control when you set the Network manually 5 Select Network Test to check the network connectivity Wireless Network Setup The menu is activated only if the Samsung Wireless LAN Adapter is connected e Internet Protocol Setup Auto Manual e Network Test You can test or confirm the network connection status after setting up the network When unable to connect to an AP Access Point Your TV may fail to locate an AP Access Point that is configured as a private SSID type In this case please change the AP settings and try again If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first time and authenticates the MAC address each time you connect to the Internet your TV may not be able to connect to the Internet as the MAC address differs from that of the device PC In this case ask your Internet service provider about the procedures to connect devices other than your PC such as your TV to the Internet If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider please contact a Samsung Electronics English 25 e Select a network Access Point You can select the IP sharer to use when using a wir
132. p the network using a static IP address are described below You have to manually enter the IP address subnet mask gateway and DNS that are provided by your Internet Service Provider ISP 1 Connect the LAN port on the rear panel of the TV and the LAN port on the wall using the LAN cable The LAN Port on the Wall TV Rear Panel Re REDS LAN ANTIN IN LAN Cable You can connect the LAN via a Sharer Router The LAN Port on the Wall TV Rear Panel IP Sharer LAN Cable LAN Cable The terminals the position of the port and the type of the external device may differ depending on the manufacturer If you are using a static IP address your ISP will inform you of the IP address subnet mask gateway and DNS You must enter these values to complete the network settings If you do not know the values ask your network administrator For the information on how to configure and connect a Sharer Router refer to the owner s manual for the corresponding product You can connect the TV to the LAN directly without connecting it through a Sharer Router If you use an IP Sharer IP Router that supports DHCP you can set up the device as either DHCP or static IP For the procedures to use a static IP address ask your Internet Service Provider StS Ss English 23 Q Network Connection Wireless You can connect to the network wirelessly through a wireless IP sharer TV Side Panel The LAN Port on the Wa
133. ply with the terms of this License in conveying all material for which you do not control copyright Those thus making or running the covered works for you must do so exclusively on your behalf under your direction and control on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you Conveying under any other circumstances is permitted solely under the conditions stated below Sublicensing is not allowed section 10 makes it unnecessary Protecting Users Legal Rights From Anti Circumvention Law No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996 or similar laws prohibiting or restricting circumvention of such measures When you convey a covered work you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work and you disclaim any intention to limit operation or modification of the work as a means of enforcing against the work s users your or third parties legal rights to forbid circumvention of technological measures Conveying Verbatim Copies You may convey verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each
134. public the best way to achieve this is to make it free software which everyone can redistribute and change under these terms To do so attach the following notices to the program It is safest to attach them to the start of each source file to most effectively state the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found lt one line to give the programs name and a brief idea of what it does gt Copyright C lt year gt lt name of author gt This program is free software you can redistribute it and or modify it under the terms of the GNU General Public License as published by the Free Software Foundation either version 3 of the License or at your option any later version This program is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License for more details You should have received a copy of the GNU General Public License along with this program If not see lt http Awww gnu org licenses gt Also add information on how to contact you by electronic and paper mail If the program does terminal interaction make it output a short notice like this when it starts in an interactive mode lt program gt Copyright C lt year gt lt name of author gt This program comes with ABSOLUTELY NO WARRANTY for details type show w
135. puter are shown below The actual screens on Display Properties your PC will probably be different depending upon your particular version of Windows and Themes Desktop Screen Saver Appearance Settinas your particular video card However even if your actual screens look different the same basic Bie eat ee id set up information will apply in almost all cases If not contact your computer manufacturer or Samsung Dealer 1 First click on Control Panel on the Windows start menu 2 When the control panel window appears click on Appearance and Themes and a display x x i Color qualit dialog box will appear cs BU reece 3 When the control panel window appears click on Display and a display dialogbox will appear 4 Navigate to the Settings tab on the display dialog box e The correct size setting resolution Optimum 1920 X 1080 pixels e Ifa vertical frequency option exists on your display settings dialog box the correct value is 60 or 60 Hz Otherwise just click OK and exit the dialog box Sa Sis frp Display Modes If the signal from the system equals the standard signal mode the screen is adjusted automatically If the signal from the system doesn t equal the standard signal mode adjust the mode by referring to your videocard user guide otherwise there may be no video For the display modes listed on the next page the screen image has been
136. rce on the TV remote must be set to TV to use the Anynet function E Setup If you set Auto Turn Off to Yes connected external devices are also turned off when the Bappa TV is turned off If an external device is still recording it may or may not turn off ee Move Enter 5 Return B Switching between Anynett Devices Press the TOOLS button Press the ENTER C4 button to select Anynett HDMI CEC K apene 2 Press the A or Y button to select Device List then press the ENTER L button bir Anynet t devices connected to the TV are listed Sr If you cannot find a device you want press the red button to scan for devices ieee 3 Press the A or Y button to select a particular device and press the ENTERC4 button It pet is switched to the selected device Only when you set Anynett HDMI CEC to On in the Application menu the Device List menu appears Switching to the selected devices may take up to 2 minutes You cannot cancel the Move Enter 9 Retur operation during the switching operation The time required to scan for devices is determined by the number of connected devices When the device scan is complete the number of devices found are not displayed Although the TV automatically searches the device list when the TV is turned on via the power button devices connected to the TV may not always be automatically displayed in the device list Press the red button to search for the connected device If you have selected exter
137. rt USB1 HDD port However if the aii 2 Return connected device requires high power the USB1 HDD may fail to support the device Do not disconnect the USB device while it is loading MSC supports MP3 and JPEG files while a PTP device supports JPEG files only The higher the resolution of the image the longer it takes to display on the screen The maximum supported JPEG resolution is 15360X8640 pixels For unsupported or corrupted files the Not Supported File Format message is displayed If sort key is set to Basic View up to 1000 files can be displayed in each folder The other sort key can display up to 10000 files MP3 files with DRM that have been downloaded from a non free site cannot be played Digital Rights Management DRM is a technology that supports the creation of content the distribution and management of the content in an integrated and comprehensive way including the protection of the rights and interests of the content providers the prevention of the illegal copying of contents as well as managing billings and settlements When moving to a photo loading may take a few seconds At this point the loading icon will appear at the screen If more than 2 PTP devices are connected you can only use one at a time If more than one MSC device is connected some of them may not be recognized If a device requires high power more than 500mA or 5V the USB device may not be supported If an over power Fail add new d
138. rties who have received copies or rights from you under this License If your rights have been terminated and not permanently reinstated you do not qualify to receive new licenses for the same material under section 10 Acceptance Not Required for Having Copies You are not required to accept this License in order to receive or run a copy of the Program Ancillary propagation of a covered work occurring solely as a consequence of using peer to peer transmission to receive a copy likewise does not require acceptance However nothing other than this License grants you permission to propagate or modify any covered work These actions infringe copyright if you do not accept this License Therefore by modifying or propagating a covered work you indicate your acceptance of this License to do so 10 Automatic Licensing of Downstream Recipients 11 12 13 Each time you convey a covered work the recipient automatically receives a license from the original licensors to run modify and propagate that work subject to this License You are not responsible for enforcing compliance by third parties with this License An entity transaction is a transaction transferring control of an organization or substantially all assets of one or subdividing an organization or merging organizations If propagation of a covered work results from an entity transaction each party to that transaction who receives a copy of the work also receives whatever li
139. ry the Slide Show will not play 4 gt Move Adjust C Enter 5 Return Channel when Source is set to TV Select the desired channel English 21 Contents when Source is set to USB or TV Memory You can select a folder on the USB Device TV memory with music or photo files to be played when the TV turns on automatically If the folder name is too long the folder can not be selected If you are using two of the same type USB device be sure the folder names are different so the correct USB is read Repeat Select Once Everyday Mon Fri Mon Sat Sat Sun or Manual When Manual is selected press the K button to select the desired day of the week Press the ENTER L button over the desired day and the Y mark will appear You can set the hour minute and channel by pressing the number buttons on the remote control Auto Power Off When you set the timer On the television will eventually turn off if no controls are operated for 3 hours after the TV was turned on by the timer This function is only available in timer On mode and prevents overheating which may occur if a TV is on for too long time p Network Connection You can set up the Internet Protocol so that you can communicate with various connected networks LJ Network Connection Cable LAN Connection for a DHCP Environment The procedures to set up the network using Dynamic Host Configuration Protocol DHCP are described below Since an IP address subnet mas
140. s only Television Standby button This button only works when you press it for longer than 1 5 seconds A Next channel W Previous channel Volume up Volume down IrDA transmitter Use the Mini Remote Control so that this part faces the TV SAMSUNG Installing Batteries in the Remote Control Normal Remote Control 1 Lift the cover at the back of the remote control upward as shown in the figure 2 Install two AAA size batteries Make sure to match the and ends of the batteries with the diagram inside the compartment 3 Replace the cover Remove the batteries and store them in a cool dry place if you won t be using the remote control for a long time Assuming typical TV usage the batteries should last for about one year Mini Remote Control 1 Turn the battery cover counterclockwise to unlock it and then separate the battery cover Insert the corresponding 3V Lithium battery Place the battery cover into the remote control aligning it with the grooves and then turn the battery cover clockwise to lock the cover E Ifthe remote control doesn t work check the following ls the TV power on Are the plus and minus ends of the batteries reversed Are the batteries drained ls there a power outage or is the power cord unplugged ls there a special fluorescent light or neon sign nearby English 7 OPERATION Viewing the menus Before using the TV f
141. s section you must place in the relevant source files a statement of the additional terms that apply to those files or a notice indicating where to find the applicable terms Additional terms permissive or non permissive may be stated in the form of a separately written license or stated as exceptions the above requirements apply either way Termination You may not propagate or modify a covered work except as expressly provided under this License Any attempt otherwise to propagate or modify it is void and will automatically terminate your rights under this License including any patent licenses granted under the third paragraph of section 11 However if you cease all violation of this License then your license from a particular copyright holder is reinstated a provisionally unless and until the copyright holder explicitly and finally terminates your license and b permanently if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation Moreover your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means this is the first time you have received notice of violation of this License for any work from that copyright holder and you cure the violation prior to 30 days after your receipt of the notice Termination of your rights under this section does not terminate the licenses of pa
142. se the cables in the Holder Wire Cable so that the cables are not visible through the transparent stand SJ a Q Wall Mount Type Do not pull the cables too hard when arranging them This may cause damage to the product s connection terminals English 67 B Anti Theft Kensington Lock The Kensington Lock is a device used to physically fix the system when using it in a public place The appearance and locking method may differ from the illustration depending on the manufacturer Refer to the manual provided with the Kensington Lock for proper use E The locking device has to be purchased separately E The location of the Kensington Lock may be different depending on its model 1 Insert the locking device into the Kensington slot on the LED TV and turn it in the locking direction Connect the Kensington Lock cable lt Optional gt Fix the Kensington Lock to a desk or a heavy stationary object lt Q lt 0 g1 L Securing the Installation Space Keep the required distances between the product and other objects e g walls to ensure proper ventilation Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product Install the product so the required distances shown in the figure are kept
143. shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law No Surrender of Others Freedom If conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not convey it at all For example if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program Use with the GNU Affero General Public License Notwithstanding any other provision of this License you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work and to convey the resulting work The terms of this License will continue to apply to the part which is the covered work but the special requirements of the GNU Affero General Public License section 13 concerning interaction through a network will apply to the combination as such 14 Revised Versions of this License The Free Software Foundation may publish rev
144. should be permitted by the firewall Programme on your PC The Skip lt gt keys or Pause function may not work while a movie is playing for the DLNA of other manufacturers depending on the corresponding content information The playing time may not be displayed while a movie is playing Ss English 49 ANYNET Connecting Anynet Devices What is Anynett Anynett is a function that enables you to control all connected Samsung devices that support Anynet with your Samsung TV s remote The Anynett system can be used only with Samsung devices that have the Anynett feature To be sure your Samsung device has this feature check if there is an Anynett logo on it To connect toa TV Anynet Device 1 Anynet Device 2 Anynet Device 3 Anynet Device 4 HDMI OUT HDMI OUT L L e HDMI 1 3 Cable HDMI 1 3 Cable HDMI 1 3 Cable HDMI 1 3 Cable 1 Connect the HDMI IN 1 DVI 2 3 or 4 jack on the TV and the HDMI OUT jack of the corresponding Anynett device using an HDMI cable To connect to Home Theatre Home Theatre Anynet Device 4 zo gt FS HDMI OUT HDMI IN t w oh I S HDMI 1 3 Cable j i HDMI 1 3 Cable j Anynet Device 1 Anynet Device 2 Anynet Device 3
145. sponding Source The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made If you convey an object code work under this section in or with or specifically for use in a User Product and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term regardless of how the transaction is characterized the Corresponding Source conveyed under this section must be accompanied by the Installation Information But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product for example the work has been installed in ROM The requirement to provide Installation Information does not include a requirement to continue to provide support service warranty or updates for a work that has been modified or installed by the recipient or for the User Product in which it has been modified or installed Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network Corresponding Source conveyed and Installation Information provided in accord with this section must be in a format that is publicly documented and with an imp
146. ssert copyright on the software and 2 offer you this License giving you legal permission to copy distribute and or modify it For the developers and authors protection the GPL clearly explains that there is no warranty for this free software For both users and authors sake the GPL requires that modified versions be marked as changed so that their problems will not be attributed erroneously to authors of previous versions Some devices are designed to deny users access to install or run modified versions of the software inside them although the manufacturer can do so This is fundamentally incompatible with the aim of protecting users freedom to change the software The systematic pattern of such abuse occurs in the area of products for individuals to use which is precisely where it is most unacceptable Therefore we have designed this version of the GPL to prohibit the practice for those products If such problems arise substantially in other domains we stand ready to extend this provision to those domains in future versions of the GPL as needed to protect the freedom of users Finally every program is threatened constantly by software patents States should not allow patents to restrict development and use of software on general purpose computers but in those that do we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary To prevent this the GPL assures that patents cann
147. stereo signal is weak and an automatic switching occurs then switch to the mono This function is only activated in stereo sound signal It is deactivated in mono sound signal This function is only available in TV mode English 19 SETUP p Configuring the Setup Menu Q Language You can set the menu language A Language English L Time Time For detailed procedures on setting up options refer to the Setting the Time instructions refer to pages 21 22 Network Setup Child Lock Change PIN L Game Mode Off On When connecting to a game console such as PlayStation or Xbox you can enjoy a more realistic gaming experience by selecting game menu Restrictions on game mode Caution To disconnect the game console and connect another external device set Game Mode to Off in the setup menu f you display the TV menu in Game Mode the screen shakes slightly Game Mode is not available in regular TV and PC mode While PIP is in operation the Game Mode function cannot be used If the picture is poor when external device is connected to TV check if Game Mode is On Set Game Mode to Off and connect external devices If Game Mode is On Picture mode is automatically changed to Standard and cannot be changed Sound mode is automatically changed to Custom and cannot be changed Adjust the sound using the equalizer E The Reset Sound function is activated Selecting the Reset function after settings
148. t Photo then press the ENTER L button 3 Press the A button to move to the Sort key Section 4 Ver rs lt F Ss X aja Press the lt or gt button to select a sorting standard Basic View Timeline me en py T s e k T Colour Folder Preference The photos are sorted according to the newly selected sorting standard 5 Press the Y button to move to the File List Section Press the Play Seis UME ae ee O ENTERL4 button to start the Slide Show in the order you selected To move to the previous next group press the lt lt REW or gt gt FF button Photo information is automatically set The colour information extracted from a photo file may be different from your expectations You can change the colour and preference PTP does not support folder sort mode LI Basic View Shows the folders on the USB memory device If you select a folder and press the ENTER L button only the photo files contained in the selected folder are displayed When sorted according to the Basic View you cannot set Favourites files Q Timeline Sorts photos by date It sorts by year and month from the earliest photo LC Colour Red Yellow Green Blue Magenta Black Gray Unclassified Sorts photos by colour You can change the photo colour information You should set the Use Colour View to on in the Setup menu before sorting photos by colour LI Folder Sorts photos by folder If there are many folders in USB the photos fil
149. t address should be changed e g IP Address 123 456 789 2 Connect the PC to which the Samsung PC Share Manager Programme will be installed and the external modem using a LAN cable You can connect the TV to the PC directly without connecting it through a Sharer Router English 45 Installing the DLNA Application To play content on the PC on the TV you have to first install the application To use the DLNA function smoothly use the Programme in the CD ROM supplied with the TV or use the Samsung PC Share Manager Programme corresponding to the TV model that can be downloaded from the Samsung web site System Requirements 1 Insert the Programme CD supplied with this TV into your PC 2 30MB of free hard disk space is needed for the programme installation If you share files up to 30MB of hard disk drive space is required for each 100 files If you cancel file sharing the hard disk drive space used for the thumbnail information is also freed Supported Formats e Image JPEG Audio MP3 Video AVI MKV ASF MP4 3GPP PS TS container For detailed supported video formats refer to the Playing a Movie File instructions Install the application SAMSUNG PC Share Manager InstallShield Wizard 1 Run the Setup exe file on the Programme CD supplied with the product E Alternatively you can download the file from www samsung com 2 Install the SAMSUNG PC Share Manager as shown in the figures 3 When the
150. t be supported depending on your country If you have some problems while using a widget service please contact to service provider In the widget press the green button and get contact information or refer to help website for service provider information English may be only supported in widget service depending on region Not available in all locations ie Getting Started with Internet TV Internet TV provides SAMSUNG s widget services through a network connection Internet TV contents can be changed depending on contents provider You can access various information such as YouTube through the Internet TV service The configuration of Widgets and their provided services may differ according to the selected country After changing country turn off and on the TV Then you can use widget service supported changed country If Country is set to Others TV can t recognize your country In this case please select directly from the service country list If a certain Contents font provided by contents provider is not supported on TV It may not be viewed normally For more information on how how to configure your country refer to the Plug amp Play Feature instructions You may experience slow operation or hesitation when using this function due to network conditions Before using Internet TV set up the network first For more information on how to configure your network refer to Setting the Network When running Internet TV for
151. t connected You cannot use the remote control when you are configuring Anynet or switching to a view mode Use the remote control when the Anynett setting or switching to view mode is complete You cannot use the play function when Plug amp Play is in progress Check whether or not the device supports Anynett functions Check whether or not the HDMI 1 3 cable is properly connected Check whether Anynett HDMI CEC is set to On in the Anynett setup menu Search Anynet devices again You can connect an Anynett device using the HDMI 1 3 cable only Some HDMI cables may not support Anynet functions If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power failure please repeat the device scan Check whether the antenna jack on the recording device is properly connected English 53 CONTENT LIBRARY B Using the Content Library The Content Library allows you to enjoy various content on your TV You can use the default Media Play USB amp DLNA content stored in the TV memory or you can enjoy new content using a USB device S e Content Library Internet TV Home Network Centre gt So 2 5 D Le Using the Content Library Menu 1 Press the MENU button Press the A or Y button to select Application then press the ENTER LY button 2 Press the A or Y button to select Content Library then press the ENTER L lt button The Content Library main menu is displayed
152. t of the work in a fashion requiring copyright permission other than the making of an exact copy The resulting work is called a modified version of the earlier work or a work based on the earlier work 3I kK Licensees A covered work means either the unmodified Program or a work based on the Program To propagate a work means to do anything with it that without permission would make you directly or secondarily liable for infringement under applicable copyright law except executing it on a computer or modifying a private copy Propagation includes copying distribution with or without modification making available to the public and in some countries other activities as well To convey a work means any kind of propagation that enables other parties to make or receive copies Mere interaction with a user through a computer network with no transfer of a copy is not conveying An interactive user interface displays Appropriate Legal Notices to the extent that it includes a convenient and prominently visible feature that 1 displays an appropriate copyright notice and 2 tells the user that there is no warranty for the work except to the extent that warranties are provided that licensees may convey the work under this License and how to view a copy of this License If the interface presents a list of user commands or options such as a menu a prominent item in the list meets this criterion
153. t the Samsung Wireless LAN Adapter to the USB1 HDD or USB2 port of the TV Mobile phone TV Side Panel 2 For more information on how to configure Ad hoc network refer to page 26 For information on configuring the mobile phone s network settings refer to the mobile phone manual 3 Set up the IP address SSID and password for the mobile phone in the Ad hoc Settings of the mobile phone using the Network Name SSID and Security Key password displayed on the TV e Connecting through a Wireless IP sharer 1 Connect the LAN port of the TV and the Wireless IP sharer using the LAN cable E Although the LAN port is connected the network settings are configured for the wireless network Mobile phone LAN Cable For the procedures to set up the wireless sharer and the mobile phone refer to the manual of the corresponding device English 60 B Setting Up the Home Network Centre LJ Message Home Network Centre Shows a list of mobile phones which have been set up with this TV to use the message function the call arrivals text message contents and schedules set on the 111 1234 5671 Allowed mobile phone BS Media 111 1234 5672 Allowed Allowed amp Setup 111 1234 5673 Denied Allows the mobile phone 111 1234 5674 Denied Denied Blocks the mobile phone QAM UIE Delete Deletes the mobile phone from the list This function just deletes the name from the list If th
154. t without additional login When a network error occurred can t If network connection doesn t work your service might be limited use other menus except setting menu Because all of function except setting menu are needed to connect internet Is there any possibility to show adult Basically at the list on the menu it is filtered out But by using search function It can movies on YouTube Country UAE Australia China India Indonesia Japan Malaysia NewZealand Philippines Singapore Taiwan Thailand Vietnam South Africa be shown In this case using the Widget Gallery lock the widget service L Help Website Website www samsung com Consumer television gt medi 2 0 Internet TV www samsung com Consumer television medi 2 0 Internet TV www samsung com gt PAH Am gt Bim gt medi 2 0 gt Internet TV www samsung com consumer products television gt medi 2 0 Internet TV www samsung com gt Produk television medi 2 0 Internet TV www samsung com gt Sanla x gt 156 7 7 2 7 L T medi 2 0 Internet TV www samsung com Consumer television medi 2 0 Internet TV www samsung com Consumer television medi 2 0 Internet TV www samsung com Consumer television gt medi 2 0 Internet TV www samsung com Consumer television gt medi 2 0 Internet TV www samsung com HA H E non gt 4 medi 2 0 Internet TV Wwww samsung
155. te sj uuey9 y Lock Timer Viewing Edit Channel Name Sort C C C C C C C C C C A OMANI 0 amp u Add to Favourite Delete from Favourite You can set channels you watch frequently as favourites a Press the TOOLS button to display the Tools menu You can also set the add to or delete from Favourite by selecting Tools Add to Favourite or Delete from Favourite E The amp symbol will be displayed and the channel will be set as a favourite All favourite channels will be shown on Favourites menu Lock Unlock You can lock a channel so that the channel cannot be selected and viewed This function is available only when the Child Lock is set to On see page 20 The PIN number input screen appears Enter your 4 digit PIN number The default PIN number of a new TV set is 0 0 0 0 You can change the PIN by selecting Change PIN from the menu The f symbol will be displayed and the channel will be locked English 11 Timer Viewing If you reserve a programme you want to watch the channel is automatically switched to the reserved channel in the Channel List even when you are watching another channel To reserve a programme set the current time first see page 21 Only memorized channels can be reserved You can set the channel day month year hour and minute directly by pressing the number buttons on the remote control Reserving a programme will be shown in the Progr
156. the first time the basic settings proceed automatically It may take few minutes to update 1 2 Press the MENU button Press the A or Y button to select Application then press the ENTER L button Press the A or Y button to select Internet TV then press the ENTER L button Press the Internet button on the remote control to display the Internet TV menu The User Agreement is displayed Select Agree to accept the agreement The Statistics amp Analysis is displayed Select Agree to accept the agreement E Setting up Internet TV You can check and use the menus regarding Single Sign On SSO system management and properties Press the A or V button to select Setup then press the ENTER L button U Single Sign On You can use this menu when creating deleting the account Using the Single Sign On you can control your account including contents site s account information You don t need additional log in Account is only for internet TV Create Account You can create account and be linked with desired service site Account will be made less than 10 Character of Account should be limited to 10 If there is no service that needs log in you can not create account Account Management Service Site You can register log in information of service site such as YouTube Change Password Change the password of your account Delete Delete the account If you forget the password of account press the remote control b
157. the music to copy Alternatively select multiple files by pressing the Yellow button Press the TOOLS button to select Copy or Copy Current Group Copy the selected file The files on the USB device are saved to the TV memory You can only copy the files saved on the USB device When the TV memory is full files cannot be copied Delete Delete All Delete Selected File When multiple files are selected Select the file to delete Alternatively select multiple files by pressing the Yellow button Press the TOOLS button to select Delete or Delete All Delete Selected File The files are deleted You can only delete the files saved in the TV memory You cannot recover a deleted file Change Group When the Sort key is Mood You can change the mood information of music files The group information of the current file is updated and the file is moved to the new group To change the information of multiple files select files by pressing the Yellow button Deselect All When at least one file is selected You can deselect all files The Y mark indicating the corresponding file is selected is hidden Information The music file information including the name the size the date modified and the path is displayed You can view the music file information during Play Current Group using the same procedures Press the INFO button to viewing the information ez Remove Safely TE Bs sE You can remove the device safely from the
158. tion Menu 1 During a slide show or when viewing a photo press the TOOLS button to set the option 2 Press the A or Y button to select the desired option then press the ENTER L button wo N Q Stop Slide Show Start Slide Show Tools You can start or stop a SlideShow 4 Slide Show Speed H Normal K Slide Show Effect Fade Q Slide Show Speed Slow Normal Fast g ra You can select the slide show speed GE ous This function is available only during a slide show 5 rA Sound Sting You can also change the speed of the Slide Show by pressing the lt lt REW or gt A an gt gt FF button during the Slide Show SPs S Move C3 Enter i Exit LY Slide Show Effect You can select the screen transition effect used in the slideshow None Fade Fade2 Blind Spiral Checker Linear Stairs Wipe Random This function is available only during a slide show LI Rotate You can rotate photos saved on a USB memory device Whenever you press the lt button it rotates by 270 180 90 and 0 Whenever you press the K button it rotates by 90 180 270 and 0 The rotated file is not saved LI Zoom You can magnify photos saved on a USB memory device x1 x2 x4 To move the enlarged photo image press the ENTER L button then press the A lt gt buttons Note that when the enlarged picture is smaller than the original screen size the location change function doesn t work The
159. urity key for the Ad hoc mode only the following is supported 1 Authentication Mode SHARED WPANONE 2 Encryption Type WEP TKIP AES If your AP supports WPS Wi Fi Protected Setup you can connect to the network via PBC Push Button Configuration or PIN Personal Indentification Number WPS will automatically configure the SSID and WPA key in either mode If the device isn t certified it may not connect to the TV via the Samsung Wireless LAN Adapter English 24 B Setting the Network Q Network Type Select Cable or Wireless as the method to connect to the network The menu is activated only if the Samsung Wireless LAN Adapter is connected 2 Network Type Cable Network Setup Child Lock On Cable Change PIN Light Effect In Standby Connect to the network using a cable Melody Medium Energy Saving Medium Wireless Connect to the network wirelessly Q Network Setup Cable Network Setup when Network Type is set to Cable Please check if the LAN cable is connected e Internet Protocol Setup Auto Manual e Network Test You can test or confirm the network connection status after setting up the network When unable to connect to a wired network If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first time and authenticates the MAC address each time you connect to the Internet your TV may not be able to connect to
160. us to minimum Standard Sets 200Hz Motion Plus to medium Smooth Sets 200Hz Motion Plus to maximum Custom Adjusts the blur and judder reduction level to suit your preference Blur Reduction Adjusts the blur reduction level from video sources Judder Reduction Adjusts the judder reduction level from video sources when playing films Reset Reset the custom settings e Demo Displays the difference between 200Hz Motion Plus on and off modes Blue Only Mode Off On This function is for AV device measurement experts This function displays the blue signal only by removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video equipment such as DVD players Home Theatres etc Using this function you can adjust the Colour and Tint to preferred values appropriate to the signal level of each video device using the Red Green Blue Cyan Magenta Yellow Colour Bar Patterns without using an additional Blue Filter Blue Only Mode is available when the picture mode is set to Movie or Standard L Picture Reset Reset Picture Mode Cancel Resets all picture settings to the default values Reset Picture Mode Current picture values return to default settings E Viewing Picture in Picture You can use the PIP feature to simultaneously watch the TV tuner and one external video Melody Medium Energy Saving Off source This product has on
161. ustomized sound settings Q Equalizer The sound settings can be adjusted to suit your personal preferences e Mode Selects the sound mode among the predefined settings e Balance L R Adjusts the balance between the right and left speaker e 100Hz 300Hz 1KHz 3KHz 10KHz Bandwidth Adjustment To adjust the level of different bandwidth frequencies e Reset Resets the equalizer settings to the default values LY SRS TruSurround HD Off On SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5 1 multichannel content over two speakers TruSurround delivers a compelling virtual surround sound experience through any two speaker playback system including internal television speakers It is fully compatible with all multichannel formats al Press the TOOLS button to display the Tools menu You can also set the SRS TruSurround HD by selecting Tools SRS TS HD English 18 LY Auto Volume Off On Each broadcasting station has its own signal conditions and so it is not easy to adjust the volume every time the channel is changed This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low Q Speaker Select When you watch TV with it connecting to a Home theatre turn the TV speakers off so you can listen to sound from the Home theatre s external sp
162. uttons in the following sequence which resets the Internet TV POWER off MUTE 9 4 8 POWER on If you use this function all accounts will be deleted English 57 UN System Setup Ticker Autorun Ticker Duration may not be supported depending on country Change the Service Lock password The default password number of a new TV set is 0 0 0 0 If you forget the password press the remote control buttons in the following sequence which resets the password to 0 0 0 0 POWER off MUTE 8 2 4 POWER on Service Duration Select to set the service duration time before the screen saver appears Ticker Autorun Off On Select to set ticker to run automatically or not when turning on the TV Ticker Duration Select to set the service duration time before the screen saver appears Q Properties Display information of Internet TV You can measure the speed of your Internet TV service using Measuring the speed of the Internet TV service i Using the Internet TV service In a widget that provides multiple category menus you can view the contents of the category menus using the lt and gt buttons Account Login 1 Press the Red button 2 Select desired User account then press the ENTER L button 3 Input the password When login succeeds User account will be displayed on the screen Before login at least one and more account should be registered If you want to create account
163. ve Safely Q Picture Setting Sound Setting You can configure the picture and sound settings Seen aes amp Move just gt g Exi Q Information The music file information is displayed Q Remove Safely You can remove the device safely from the TV EF Sorting the Movie List You can sort movies in the Movie List by a particular standard 1 Press the MEDIA P button 2 Press the lt or K button to select Movie then press the ENTER L button 3 Press the A button to move to the Sort key Section 4 Press the lt or gt button to select a sorting standard Basic View Timeline L Ps n Fer oy Title Folder Preference Asta ees om The movie files are sorted according to the newly selected sorting standard 5 Press the gt Play ENTER L a button to play the movie in the order selected Movie information is automatically set You can change the preference SUM Device Favourites Settings mSelect 2 Tools 2 Return 1233 avi ABCD avi LI Basic View Shows the folders of the USB memory device If you select a folder and press the ENTER L button only the movie files contained in the selected folder are displayed When sorted according to the Basic View you cannot set Favourites files Q Timeline Sorts movies by date It sorts by year and month from the earliest movie U Title Sorts and displays the movie titles in symbol number alphabet special order Q Folder lf there are many folders in USB the m
164. yed Photo Music Movie Setup SUM Device S Return Sie MEDA P content Ei K 7 4 of Press the MEDIA P button on the remote control to display the Media Play menu Press the SOURCE button on the remote control to view the source list Then Press the A or Y button to select USB 3 Press the Red button then press the A or Y button to select the TV memory or USB Memory Press the ENTER C button This function differs depending on the TV Memory USB Memory Device DLNA device The selected USB device name appears at the bottom left of the screen Slide Show Copy 4 Press the lt or gt button to select an icon Photo Music Movie Setup then eel PS d TBS Play Current Group press the ENTER 4 button 3 E Copy Current Group Information To exit Media Play mode press the MEDIA P button on the remote control Removing a USB Memory Device Safely You can remove the device safely from the TV 1 Press the TOOLS button in the Media Play file list screen or while a Slide Show music or movie is being played 2 Press the A or Y button to select Remove Safely then press the ENTER L button 3 Remove the USB device from the TV Screen Display Bnc arne Sort key List Section Group List Section File List Section a 1231 P9 1232 jpg 1236 jpg 1287 iP9 1233 jpg i 1235 jpg rene 6 1File s Selected Move to either Sort key List Section Group List Section or File
165. you want to play continuously by pressing the lt or gt button to select it from the File List Section Press the gt Play ENTER L button Select Play Continuously Resume Play by pressing the Blue button The Movie will begin to play from where it was stopped If Cont movie play help function is set On in the Setup menu a pop up message will appear when you resume play a movie file English 42 Movie Play Option Menu Movie Play Option Menu E Picture Setting Sound Setting You can configure the picture and sound settings Picture Size Fit Play video at the TV screen size Original Play video at the original size Caption Setting You can set the captions for the movie Caption On Off You can turn the captions for the movie on or off Caption Language You can set the caption language Caption Size Small Standard Large You can change the font size of the captions Caption Sync You can adjust the caption sync Caption Sync Reset You can reset the adjusted caption sync Information The movie file information is displayed Remove Safely You can remove the device safely from the TV English 43 Tools Picture Setting Sound Setting Picture Size Fit Caption Setting Information Remove Safely Move C Enter gt Exit B Using the Setup Menu Setup displays the user settings of the Media Play menu 1 Press the MEDIA P button Megi aa 2 Press the lt

Samsung UA46B8000 User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents