Samsung PAL60 User's Manual
Contents
1. 5 Press the Y or A button to select LNA Press the ENTER C button Result The options available are listed 6 Select On or off by pressing the Y or A button Press the ENTER C button to confirm gt If the picture is noisy with the LNA set to On select Off LNA setting is to be made for each channel Depending on areas factory mode of LNA will be set up as On or Off Changing the Sound Standard You can select the type of special sound effect to be used when watching a given broadcast Sound Mode Standard gt 1 Press the MENU button PE Auto Volume Off gt Result The main menu is displayed SRS TSXT Off gt Internal Mute Off gt 2 Press the Y or A button to select Sound Result The options available in the Sound group are displaved Move Enter 3 Press the ENTER button Result The Mode is selected Mode Standard 4 Press the ENTER C button again Select the option by pressing the Y or A button The sound effects are displayed in the following order Equalizer Auto Volume SRS TSXT Internal Mute Music Movie Speech i Standard Music Movie Speech Custom 6 Press the ENTER C button to confirm Move G Enter Return 2 You can also set these options simply by pressing the DUALI I P SIZE H STILL Cv S MODE Sound Mode button S MODE P MODE a gt 0 5 39 Adjusting the Sound Settings The sound setti2. 1 Press the MENU button Picture Tem Brae S Result The main menu is displayed Custom b Colour Tone Custom gt 2 Press the Y or A button to select Picture Colour Control gt FilmMode Off P Result The options available in the Picture group are Size 16 9 gt displayed DNIe On gt fi 3 Press the ENTER C button Move Enter M Return 4 Press the Y or A button to select Custom Press the ENTER C button Custom Result The Custom menu is displayed NE eee ____ lt 5 PresstkeVor A button to select the option Contrast Sharpness m 70 IU CL 1 U Brightness Sharpness to be adjusted Press the ENTER C button Result The horizontal bar is displayed Move the horizontal bars cursor left or right by pressing the or gt button Move Enter M Return 6 Press the MENU button to confirm your choice Press the MENU button The options available in the Picture group are displayed again Picture T Mode Middle Custom Colour Tone Colour Control Colour Result 8 Press the Y or A button to select Colour Tone Press the ENTER C button Size Colour2 DNIe Colour3 PIP 9 Select the option by pressing the Y or A button vy Move Enter M Return The colour tones are displayed in the following order Custom PC mode only Colourl Colour2 Colour3 Colour Control G Cj 50 B ae a 70 10 Press the MENU button The options available in the Picture group are
3. 48 Television programme times News bulletins and weather forecasts Sports results Travel information This information is divided into numbered pages see diagram Part A T M U O U Contents Selected page number Broadcasting channel identity Current page number or search indications Date and time Text Status information FASTEXT information Teletext information is often divided between several pages displayed in sequence which can be accessed by Entering the page number Selecting a title in a list Selecting a coloured heading FASTEXT system Displaying the Teletext Information You can display Teletext information at any time on your television For Teletext information to be displayed correctly channel reception must be stable otherwise Information may be missing Some pages may not be displayed 1 Select the channel providing the Teletext service by pressing the PO or button 2 Press the TTX MIX GC button to activate the teletext mode Result The contents page is displayed It can be redisplayed pO at any time by pressing the Ei index button S D 3 Press the TTX MIX S button again Result The screen will be split into two This Double Teletext feature lets you view the actual broadcast and teletext information separately on the screen INFO 35 4 If you wish to display the actual broadcast and teletext information on a single scree
4. Ga D MUTE Used to switch the sound off temporarily S MODE PMODE K gt gt To turn the sound back on press this button again or D press the or button MENU Used to display the Used to return to the previous LU on screen menu system menu or normal viewing v Used to Display a submenu containing selections for gt the current menu option Increase decrease a menu option value z Used to confirm your choice EXIT Used to exit from the menu Lp system and return to normal viewing directly 16 Plug amp Play Feature When the television ts initially powered ON several basic customer settings proceed automatically and subsequently The following settings are available Plug amp Play Press ENTER to Start Plug amp Play If the television is in Standby mode press the POWER button on the remote control Result The message Plug amp Play is displayed It flickers for a little while and then the Language menu is automatically displayed Select the appropriate language by pressing the Y or A button Press the ENTER C button to confirm your choice Result The message Antenna input check is displayed Make sure that the antenna is connected to the TV and then press the ENTER C button Result The Country menu is displayed Select your country by pressing the Y or A button Press the ENTER C button to confirm your choice Result The Auto Store men
5. Zo ow P P 84907 68 677 P P N Negative P Positive The interlace mode is not supported The television might operate abnormally if a non standard video format is selected The PC text quality for PS42D45 is optimum in VGA mode 848 x 4808 60Hz When this television is used as a PC display 24 bit colour is supported over 16 million colours Your PC display screen might appear different depending on the manufacturer and your particular version of Windows Check your PC instruction book for information about connecting your PC to a television lfavertical and horizontal frequency select mode exists select 60Hz vertical and 31 5kHz horizontal In some cases abnormal signals such as stripes might appear on the screen when the PC power is turned off or if the PC is disconnected If so press the TV VIDEO button to enter the Video mode Also make sure that the PC is connected When connecting a notebook PC to the television make sure that the PC screen is displayed through only the television Otherwise random signals might appear When horizontal synchronous signals seem irregular in PC mode check PC power saving mode or cable connections The Display Settings Table above complies to the IBM VESA standards and based on the analog input The DVI support mode is regarded as same to the PC support mode The best timing for the vertical frequency to each mode is 60Hz 58 P
6. 17 aa e GET button repeatedly to return to the normal viewing M Return PC Setup Image Lock Position Information Auto Adjustment Move Enter I Return Auto Adjustment Auto Adjusting 30 Using the Fine Tune If reception is weak you can fine tune a channel manually Channel 1 Press the MENU button A HELENE he Auto Store gt Result The main menu is displayed Manual Store gt Edit gt 2 Pressthe W or A button to select Channel ad Ch Scan gt Result The options available in the Channel group are displayed Move C Enter M Return 3 Press the ENTER C button 4 Press the VY or A button to select Fine tune Press the ENTER Fine Tune C button Result The horizontal bar is displayed Move the horizontal bars cursor left or right by pressing the or gt button z to reach the reguired setting v SEE Reset Return 9 Press the lt or b button until the picture and sound are both clear and sharp Fine Tune gt gt lf you are unable to fine tune a channel check that the Reset Return Colour System and Sound System settings are correct Move lt gt Adjust gt gt Fine tune Store will change the colour of the Channel OSD On Screen Display from White to Red Fine Tune gt gt To reset the fine tuning to 0 press the Y button to nae select Reset then press the ENTER button Reset Return gt Move lt gt Adjust Store 31 Viewing the Ch
7. If you connect using a different coaxial cable there is risk of noise or interference to the screen image You must not use another general purpose cable Connecting a Satellite Receiver or Decoder In order to watch television programmes broadcast via a satellite network you must connect a satellite receiver to the rear of the Rear of the PDP PDP Also in order to descramble a coded transmission signal you must connect a decoder to the rear of the PDP Using a Coaxial cable Connect a coaxial cable to the Receiver or Decoder output socket Television aerial input socket gt f you wish to connect both a satellite receiver or decoder and a VCR you should connect the Receiver or Decoder to the VCR VCR to the PDP Otherwise connect the receiver or decoder directly to the PDP Satellite receiver Decoder 14 Switching On and Off The mains lead is attached to the rear of your PDP 1 Plug the mains lead into an appropriate socket Front of the PDP Result The Standby indicator on the front of the PDP lights up gt gt The main voltage is indicated on the rear of the PDP and the frequency is 50 or 60Hz 2 Press the 1 button on the front of the PDP or POWER button on the remote control to switch the PDP on Result The programme that you were watching last is re selected automatically gt gt f you have not yet stored any channels No clear picture appears Ref
8. Small Double1 Double2 Move Enter M Return gt gt Selecta size of the sub picture by pressing the V or A button Press the ENTER S button PIP PIP Table of PIP Settings Source X This PIP combination is not available Swap O This PIP combination is available Tw Jen Ts conan T comp om wo txt xt xf x o o X Size Position Prog Move Enter M Return X X cms x x lx x company 0 0 0 x0 x0 x wxm dojo ox x x e lo o o x x x 36 Viewing the Picture In Picture PIP continued PIP Source 9 Press the Y or A button to select Position Press the ENTER Rewer C button J Size Position Prog Result The positions available are displayed m 8 m Move C Enter M Return gt gt Select a position of the sub picture by pressing the Y or A button Press the ENTER Ce button 10 Press the or A button to select Prog Select the channel that ee you want to view through sub picture by pressing the ENTER C Swap butto n 7 Size z Position Lm NA Prog P1 gt gt lfthe sub picture is no signal and the main picture is output from a Component PC or DVI signal the sub picture will be blue If the main picture is output from a Video signal the sub picture will be black Move C Enter Return 37 Time Language English AV Setup Digital NR On Miscellaneous PC Setup Move z a M
9. Auto Store Press the ENTER od Fine Tune gt Cc button Ch Scan gt Result The Auto Store menu is displayed Move C Enter M Return 8 Press the ENTER C button to start the search Result The search will end automatically Channels are sorted Auto Store and stored in an order which reflects their position in ehanne ls Ole Inpro cess Storing the frequency range with lowest first and highest last 57 MHz The programme originally selected is then displayed 1e op 3 gt Tostop the search before it has finished press the Enter Return MENU 11 button 9 When the channels have been stored you can Sort them in the order reguired see page 23 Clear a channel see page 22 Fine tune channel reception if necessary see page 31 Assign a name to the stored channels see page 24 Activate deactivate the Digital Noise Reduction feature see page 38 9 000 19 Storing Channels Manually You can store up to 100 television channels including those received via cable networks Channel Country Austria a When storing channels manually you can choose Auto Store gt Whether or not to store each of the channels found Edit gt Fine Tune gt The programme number of each stored channel which Ch Scan gt you wish to identify Move Enter M Return 1 Press the MENU button Result The main menu is displayed Manual Store Prog aour gona 2 Press the Y or A button t
10. HOLD VOLUME INCREASE TEMPORARY SOUND SWITCH OFF VOLUME DECREASE AUTOMATIC SWITCH OFF TELETEXT STORE DEPENDING ON THE MODEL MENU DISPLAY TELETEXT INDEX MOVE TO THE REQUIRED MENU OPTION ADJUST AN OPTION VALUE RESPECTIVELY SOUND MODE SELECTION TELETEXT SUB PAGE TUNES TO THE PREVIOUS CHANNEL NEXT CHANNEL TELETEXT NEXT PAGE PRESS TO SELECT ALL OF THE AVAILABLE VIDEO SOURCES TELETEXT MODE LIST FLOF SELECTION DEPENDING ON THE MODEL PREVIOUS CHANNEL TELETEXT PREVIOUS PAGE INFORMATION DISPLAY TELETEXT REVEAL TV MODE SELECTION EXIT TELETEXT DEPENDING ON THE MODEL CONFIRM YOUR CHOICE STORE OR ENTER PICTURE SIZE TELETEXT SIZE SELECTION s TTXMIX DUAL HI PSZERH STILL PICTURE STILL TELETEXT DISPLAY elf Cte f 6 TELETEXT CANCEL MIX BOTH TELETEXT INFORMATION J AND THE NORMAL BROADCAST S o e SOUND EFFECT SELECTION Gp QY Ga PICTURE EFFECT SELECTION 3 gt The performance of the remote control may be affected by bright light Inserting the Batteries in the Remote Control You must insert or replace the batteries in the remote control when you Purchase the PDP Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol ww downwards and then pulling firmly to remove it 2 Insert two RO3 UM4 AAA 1 5V or equivalent batteries taking care
11. Scan 2 Press the Y or A button to select Channel Move Enter M Return Result The options available in the Channel group are displayed 3 Press the ENTER C button Add Delete 4 Press the Y or A button to select Edit Press the ENTER C button Child Lock Result The Edit menu is displayed 5 Press the Y or A button to select Name Press the ENTER 4 Move Enter M Return button Result he Name menu is displayed with the current channel automatically is selected 6 If necessary select the channel to be assigned a new name by pressing the Y or A button Press the ENTER 4 button Result Arrow indications are displayed around the name box 7 Press the Y or A button to select a letter A Z a number 0 9 or a symbol space Move on the previous or next letter by A Move Enter Return pressing the or gt button 8 When you have finished entering the name press the ENTER C button to confirm the name Adjust Enter Return 24 Activating the Child Lock Activating the child lock This feature allows you to lock selected channels so that they cannot be viewed This can be used to prevent unauthorised viewing of unsuitable programmes 1 Press the MENU button Result The main menu is displayed 2 Press the Y or A button to select Channel Result The options available in the Channel group are displayed 3 Press the ENTER C button 4 Press the Y or A but
12. Time Press the ENTER CF button Result The options available in the Time group are displayed with Clock is selected 9 Press the ENTER C button Move Enter M Return 6 Press the Y or A button to move to the hour or minute Set the hour or minute by pressing the Y or A button 7 When you have finished press the EXIT Lg button to exit 8 Press the INFO _ button to display the current time Adjust Move Return 44 Switching the Television On and Off Automatically You can set the television s clock and set the On or Off timers so that the television will Switch on automatically and tune to the channel of your choice at the time you select Switch off automatically at the time you select gt gt The first step is to set the television s clock refer to 10 Setting and Displaying the Current Time on the previous page Press the MENU button Result The main menu is displayed Press the Y or A button to select Setup Result The options available in the Setup group are displayed Press the ENTER S button Press the V or A button to select Time Press the ENTER C button Result The options available in the Time group are displayed Press the Y or A button to select On Timer Press the ENTER C button Result The options available in the On Timer group are displayed Select the Hour Min Prog Volume by pressing the or b button Set these
13. are trademarks of SRS Labs Inc TruSurround XT technology is incorporated under license from SRS Labs Inc SRSC TruSurround XT r 3 Selecting the Internal Mute If you want to hear the sound through separate speakers cancel the commend internal amplifier Mode ean 1 Press the MENU button Auto Volume Off SRS TSXT Off Internal Mute Off gt gt Equalizer gt gt gt Result The main menu is displayed 2 Press the V or A button to select Sound Result The options available in the Sound group are displayed Move Enter M Return 3 Press the ENTER 3 button Sound O SSS SSE s Mode Standard 4 Press the Y or A button to select Internal Mute Press the i Equalizer ENTER C button Auto Volume Off lU SRS TSXT Off 9 Press the Y or A button to change the setting On or off gt Internal Mute Of Move C Enter M Return 41 Selecting the Sound Mode depending on the model The DUAL 1 11 button displays controls the processing and output OPS ey of the audio signal When power is switched on the mode is Z automatically preset to either Dual I or Stereo depending on the current transmission Regular broadcast Standard audio Mono Normal use NICAM Stereo DUAL Hl P SIZE FA STILL v E S MODE P MODE s ab Regular NICAM Mono NICAM Mono lt gt Mono NICAM Stereo lt gt Mono NICAM Stereo Forced mono NI
14. by pressing the Y or A button When you are satisfied with the settings select Activation to Yes Or No by pressing the Y or A button Press the MENU button Result The options available in the Time group are displayed again Press the Y or A button to select Of Timer Press the ENTER C button Result The off Timer menu is displayed Select the Hour Min or Activation by pressing the lt or b button Set these by pressing the Y or A button gt gt Absent Power Off When you set the timer On your television will eventually be turned off if you do not operate any controls during the 3 hours after the TV is turned on by timer This function is available in only the timer On mode and will prevent a leakage accident or overheating caused by your TV left on for a long time due to the timer On when you are away on holiday for example Setup Language English AV Setup Digital NR On Miscellaneous PC Setup Move C Enter Return Time Clock 07 05 Sleep Timer Off On Timer ojii Off Timer 051 Move Enter M Return On Timer Volume Activation Adjust Move Return Off Timer Activation Adjust Move Return 45 Viewing an External Signal Source Use the remote control to switch between viewing signal from connected equipment such as VCR DVD Set Top boxs and the TV source broadcast or cable Source List Edit Name Move Input TV E
15. displayed again Result 11 Press the V or A button to select Colour Control Press the ENTER C button Result The Colour Control menu is displayed Move Enter M Return 12 Press the V or A button to select the option R G B to be adjusted Press the ENTER C button The horizontal bar is displayed Move the horizontal bars cursor left or right by pressing the or gt button Result 2 The Colour Control is not available in the DVI Mode 28 Setting the Picture PC Mode Preset to the PC mode by using the TV VIDEO button or SOURCE button on the front of the PDP 1 Press the MENU button Setup Result The main menu is displayed ae Language English 2 Press the Y or A button to select Setup AV Setup Result The options available in the Setup group are PNR Pl Miscellaneous displayed 3 Press the ENTER 3 button Move C Enter Return 4 Press the Y or A button to select PC Setup Press the ENTER C button PC Setup Result The options available in the PC Setup group are displayed Position Information 5 Press the Y or A button to select Image Lock Press the ENTER Auto Adjustment C button Result The options available in the Image Lock group are displayed Move C Enter M Return 6 Press the Y or A button to select the option Coarse Fine to be adjusted Press the ENTER C button Image Lock Result The horizontal bar is displayed Move the horizontal Coarse Ej jr 5
16. or gt button Press the Y or A button to start the search Result The tuner scans the frequency range until the first channel or the channel that you selected is received on your screen 9 To assign a programme number to a channel select the Prog by pressing the or gt button Press the Y or A button until you find the correct number 10 To store the channel and associated programme number select the Store by pressing the or gt button Press the ENTER C button 11 Repeat Steps 7 to 10 for each channel to be stored Channel mode C Real channel mode You can select a channel by entering the assigned number to each air broadcasting station in this mode S Cable channel mode You can select a channel by entering the assigned number for each cable channel in this mode Manual Store Prog Colour Sound System System 9 Channel Search Store lt gt Move gt Adjust 1 Return Manual Store Prog Colour Sound System System Channel Search Store co lt gt Move Adjust I Return Manual Store Prog Colour Sound System System 9 Channel Search Store 245MHz lt gt Move gt Adjust I Return Manual Store Prog Colour Sound System System 9 Channel Search Store c 15 245MHz OK S Enter 1 Return 21 Skipping Unwanted Channels Channel Country Austria Auto Store Manual Store Fine Tune gt Ch Scan gt
17. to respect the polarities onthe battery against on the remote control onthe battery against on the remote control 3 Replace the cover by aligning it with the base of the remote control and pressing it back into place 1 Assemble two support pins with the stand base and firmly secure both sides of the support pins using 8 screws provided 2 Assemble the PDP with the stand and firmly secure the PDP using 4 screws provided Two or more people should carry the PDP Never lay the PDP on the floor because of possible damage to the screen Always store the PDP upright Installing the Display on the Wall Attachment Panel Installation Notes Do not install the PDP on any place other than vertical walls To protect the performance of the PDP and prevent troubles avoid the followings Do not install next to smoke and fire detectors Do not install in an area subjected to vibration or high voltage Do not install near or around any heating apparatus Use only recommended parts and components Mounting Kits Plastic Hanger Screws gt Se 4 EA 4 EA 1 Secure the PDP to the wall mount bracket Please refer to the following instructions 2 Set the angle by pulling tne upper end of the PDP attached to bracket in the direction of the arrow The wall mount bracket is delivered separately Please tighten the captive scre
18. 0 bar s cursor left or right by pressing the or gt button Fine TT Adjust for best picture 7 Press the MENU button to confirm your choice 8 Press the MENU button Result The options available in the PC Setup group are m i displayed again 9 Press the Y or A button to select Position 0011500 Press the ENTER S button v Result The options available in the Position group are displayed PC Setup l Lock 10 Adjust the position by using the Y A lt or gt button mageran Information 11 Press the MENU 11 button to confirm your choice Auto Adjustment Move Enter Return Position Move lt gt Move I Return 29 Setting the Picture PC Mode continued Preset to the PC mode by using the TV VIDEO button or SOURCE button on the front of the PDP 12 Ifyou get the PC information select the Information by pressing PC Setup the V or A button Press the ENTER Ce button Image Lock i Satie Result The resolution horizontal and vertical frequency are apes Auto Adjustment 13 Press the MENU button Result The options available in the PC Setup group are displayed again Move Enter Return 14 Press the Yor A button to select Auto Adjustment Press the ENTER C button Result The screen quality and position are automatically reset with the Auto Adjusting displayed Information Resolution 1024 768 peras MIT 15 When you are satisfied with the settings press the MENU
19. 200CCCOHY ooooo000000000000000000 900 0 eo TEILT 9900000 gt gt The speakers MUST have to a power handling capability of 10 watts minimum impedance 89 When you connect the speaker wire to the external speaker out connector first bind the speaker wire round the ferrite core to secure it gt gt Before connecting the speaker wire to the PDP turn off your PDP Ferrite Cores J The ferrite cores are used to attenuate undesired signals When connecting cables attach one of these ferrite cores to the cable near the connector 13 Connecting to an Aerial or Cable Television Network To view television channels correctly a signal must be received by the set from one of the following sources An outdoor aerial A cable television network A satellite network 1 In the first three cases connect the aerial or network input cable to the 75Q coaxial socket on the rear of the PDP Rear of the PDP 2 If you are using an indoor aerial you may need to turn it when Ari tuning your PDP until you obtain a picture that is both sharp and VHF UHF clear 759 Jo For further details refer to Storing Channels Automatically on page 19 Cable Television Storing Channels Manually on page 20 Network gt gt When installing or re installing your PDP be sure to use the supplied coaxial antenna cable
20. 4 5V Power 15 Clock DDC 15 5V Grounding NE 16 Hot Plug Detect ee UA 17 T M D S Data0 18 T M D S Data0 19 T M D S Data0 5 Shield 20 T M D S Data5 21 T M D S Data5 22 T M D S Clock Shield 23 T M D S Clock 24 T M D S Clock 99 Troubleshooting Before Contacting Service Personnel Before contacting Samsung after sales service perform the following simple checks If you cannot solve the problem using the instructions below note the model and serial number of the television and contact your local dealer Check that the mains lead has been connected to a wall socket Check that you have pressed the 1 button On Off and the POWER button Check the picture contrast and brightness settings Check the volume No sound or picture Check the volume Check whether the volume MUTE cX button on the remote control has been pressed Normal picture but no sound 9 99 OF No picture or black and white picture Adjust the colour settings Check that the broadcast system selected is correct Sound and picture interference Try to identify the electrical appliance that is affecting the television then move it further away Plug your television into a different mains socket e o o Blurred or snowy picture Check the direction location and connections of your aerial distorted sound This interference often occurs due to the use of an indoor aerial Remote cont
21. CAM Dual I NICAM Dual I II NICAM Dual II Mono Regular broadcast Standard audio A2 7 Stereo Bilingual or Dual I II Dual I lt gt Dual II Stereo lt gt Mono Forced mono gt gt Ifthe receiving conditions deteriorate listening will be easier if the mode is set to the Mono Ifthe stereo signal is weak and an automatic switching occurs then switch to the Mono When receiving a mono sound in the AV mode connect to the AUDIO L input connector on the side of the television If the mono sound comes out only from left speaker press the Dual I H button 42 Setting the Sleep Timer You can select a time period of between 30 and 180 minutes after which the television automatically switches to Standby mode 1 Press the MENU button Result The main menu is displayed 2 Press the Y or A button to select Setup Result The options available in the Setup group are displayed 3 Press the ENTER C button 4 Press the V or A button to select Time Press the ENTER C button Result The options available in the Time group are displayed 5 Press the Y or A button to select Sleep Timer Press the ENTER C button Result The Sleep Timer menu is displayed with the Min is selected 6 Select the preset time intervals Off 30 60 90 120 150 180 by pressing the Y or A button Press the lt or P button to move to the Activation 7 When you are satisfied with the settings select Activ
22. Mode Standard gt 1 Press the MENU button Result The main menu is displayed Move Enter M Return 2 Press the V or A button to select Sound Sound Result The options available in the Sound group are displayed Mode Standard Egualizer 3 Press the ENTER button Auto Volume go s 4 Press the Y or A button to select Auto Volume Press the Internal Mute UTT ENTER La button 5 Select the option Of or On by pressing the Y or A button Move Enter M Return 40 Setting the TruSurround XT TruSurround XT 1s a patented SRS technology that solves the problem of playing 5 1 multichannel content over two speakers Trusurround delivers a compelling virtual surround sound experience through any two speaker playback system including Saas internal television speakers It is fully compatible with all Fae Eee Sa gt multichannel formats SRSTSXT Of gt i Internal Mute Off gt 1 Press the MENU button Result The main menu is displayed Sound Mode Standard gt gt Move C Enter M Return 2 Press the Y or A button until the Sound is selected Result The options available in the Sound group are displayed Gaii E Mode Standard 3 Press the ENTER C button i Equalizer ENTER C button S Internal Mute Stereo 9 Press the Y or A button to change the setting Off 3D Mono or Stereo Move C Enter M Return gt TruSurround XT SRS and Symbol
23. Move Enter M Return Edit Add Delete Sort Name LNA Child Lock Move z a Return Add Delete Deleted Deleted Deleted Move Enter M Return Add Delete Deleted Deleted Deleted Deleted Adjust Enter l Return 22 Skipping unwanted channels You can exclude the channels of your choice from the channel scan operation When you scan through the stored channels those that you have chosen to skip are thus not displayed All channels that you do not specifically choose to skip are displayed during scanning 1 Press the MENU button Result The main menu is displayed 2 Press the Y or A button to select Channel Result The options available in the Channel group are displayed 3 Press the ENTER C button 4 Press the Y or A button to select Edit Press the ENTER C button Result The Edit menu is displayed 5 Press the Y or A button to select Add Delete Press the ENTER C button Result The Add Delete menu is displayed with the current channel automatically is selected 6 Press the Y or A button to select the channel to be deleted 7 Press the ENTER C button 8 To add or delete the channel select Added or Deleted by pressing the Y or A button Press the ENTER C button to confirm Sorting the Stored Channels This operation allows you to change the programme numbers of stored channels This operation may be necessary after using ATM You c
24. Return Setup Time Language English AV Setup Digital NR off Miscellaneous On Move Enter M Return If the signal received by your television is weak you can activate this feature to help reduce any static and ghosting that may appear on the screen 1 Press the MENU button Result The main menu is displayed 2 Press the Y or A button until the Setup is selected Result The options available in the Setup group are displayed 3 Press the ENTER C button A Press the Y or A button until the Digital NR is selected Press the ENTER C button 5 Select off or On by pressing the Y or A button Press the ENTER C button to confirm Using the LNA Low Noise Amplifier Feature Channel Country Austria Auto Store Manual Store Fine Tune gt Ch Scan gt Move Enter M Return Add Delete Sort Name LNA Off Child Lock Move Enter M Return Add Delete Sort Name Child Lock On Move C Enter Return 38 This function is very useful in the situation that the TV is used in weak signal LNA amplifies the TV signal in the weak signal area but not noise 1 Press the MENU button Result The main menu is displayed 2 Press the Y or A button to select Channel Result The options available in the Channel group are displayed 3 Press the ENTER C button 4 Press the Y or A button to select Edit Press the ENTER C button Result The Edit menu is displayed
25. a ENTER C button l Panorama 5 Press the Y or A button to change the setting ee Auto Wide Expanding and pulling up the picture from 4 3 to 1 16 9 ratio 16 9 Sets the picture to 16 9 wide mode Move Enter Return Panorama Use this mode for the wide aspect ratio of a panoramic picture Zoom Magnify the size of the picture vertically on screen 14 9 Magnify the size of the picture more than 4 3 4 3 Sets the picture to 4 3 normal mode 6 Pressthe ENTER C button to confirm gt gt Youcan select these options by simply pressing the P SIZE button on the remote control Move Enter M Return The picture size can not be changed in the PIP mode Depending on the input source the P SIZE options may vary Positioning and Sizing the screen using Zoom gt gt Resizing the screen using the Zoom enables the SMODE MODE 5 CG Ga positioning and sizing of the screen to up down direction using the Y or A button as well as the screen size Move the screen up down using the Y or A button after selecting the I by pressing the Y or A button Resize the screen vertically using the Y or A button after selecting the by pressing the Y or A button Screen enlargement operates only in TV Video S Video Component input modes PC DVI modes prevents the screen enlargement function 33 Selecting the Film Mode You can automatically sense and process film sign
26. ai gt PDP TELEVISION PLASMA DISPLAY PANEL 7 i Owner s Instructions Before operating the unit please read this manual thoroughly and retain it for future reference ON SCREEN MENUS PICTURE IN PicTURE PIP TELETEXT Screen Image retention Do not display a still image such as on a video game or when hooking up a PC to this PDP on the plasma monitor panel for more than 2 hours as it can cause screen image retention This image retention is also known as screen burn To avoid such image retention reduce the degree of brightness and contrast of this screen when displaying a still image Cell Defect The plasma display panel consists of fine cells Although the panels are produced with more than 99 9 percent active cells there may be some cells that do not produce light or remain lit Height The PDP can normally operate only under 2000m in height It might abnormally function at a place over 2000m in height and do not install and operate there Warranty Warranty does not cover any damage caused by image retention Burn in is not covered by the warranty Checking Parts rab Q D o O O S O 5 gt O 5 Q a lt O A kas S S v A S S V x O O o LU D gt U 5 o Ow Eg rs g O O 5 2a x Oe o 5 a oc lt M 2 O o 2 os 5 O 5 O 85 D 0 s S D a De PN O Conten
27. als from some m sources and adjust the picture for optimum guality icture Mode Custom Colour Tone Colour Control Film Mode Size DNIe PIP Dynamic Normal Off 16 9 On Move Z TA M Return Mode Custom Colour Tone Film Mode Size DNIe PIP Picture Dynamic Normal Lo On On Move Enter M Return Press the MENU button Result The main menu is displayed Press the Y or A button to select Picture Result The options available in the Picture group are displayed Press the ENTER 4 button Press the Y or A button to select Film Mode Press the ENTER C button Press the Y or A button to change the setting O or On On Automatically senses and processes film signals from some sources and adjusts the picture for optimum quality Off Switches off the Film Mode gt Notavailable in the PC Component 480p 576p 720p 1080i or DVI modes Mode discrepancies such as turning off Film Mode while viewing a film source or turning on Film Mode while viewing non film sources may affect the picture quality DNie Digital Natural Image engine Mode Custom Colour Tone Colour Control Film Mode Size PIP Picture Dynamic Normal Off 16 9 Move Enter M Return Mode Custom Colour Tone Film Mode Size DNIe PIP Picture Dynamic Normal Demo z Z TA M Return 34 This feature bring
28. an delete those channels you do not want to keep 1 Press the MENU button Result The main menu is displayed 2 Press the Y or A button to select Channel Result The options available in the Channel group are displayed 3 Press the ENTER C button 4 Press the Y or A button to select Edit Press the ENTER C button Result The Edit menu is displayed 5 Press the Y or A button to select Sort Press the ENTER C button Result The Sort menu is displayed 6 Select the channel that you wish to move by pressing the V or A button Press the ENTER 4 button 7 Select the number of the programme to which the channel is to be moved by pressing the Y or A button Press the ENTER C button Result The channel is moved to its new position and all other channels are shifted accordingly 8 Repeat Steps 6 to 7 until you have moved all the channels to the required programme numbers Channel Country Austria Auto Store Manual Store Fine Tune gt Ch Scan gt Move Enter M Return Name LNA Child Lock Move Enter M Return Move Enter M Return Move Enter M Return 23 Assigning Names to Channels Channel names will be assigned automatically when channel information is broadcast These names can be changed allowing Channel y you to assign new names Country Austria Auto Store M I St 1 Press the MENU button Ae Mints Result The main menu is displayed Ch
29. annel Scan Picture 1 Press the MENU button Result The main menu is displayed Channel Country Austria gt Auto Store gt Manual Store gt 2 Press the Y or A button to select Channel gt gt i Result The options available in the Channel group are ine Tune displayed 3 Press the ENTER C button Move Enter Return 4 Press the Y or A button to select Ch Scan Press the ENTER C button Result You can view every memorized channel in order Ch Scan I Return Freezing the Current Picture You can freeze the picture when watching a television programme simply by pressing the STILL button To return to normal viewing press it again TTXMIX DUAL HI P SIZE C g ED gt A the the main and sub pictures are stilled at e same time S MODE P MODE gt GG 6a gt gt This function will automatically cancel after 5 minutes 32 Selecting the Picture Size You can select the picture size which best corresponds to your viewing requirements Picture x Mode Dynamic Custom 1 Press the MENU button ColourTone Normal 3 Colour Control Result The main menu is displayed A TR on Size 16 9 2 Press the V or A button to select Picture DNIe On PIP Result The options available in the Picture group are displaved AN Enter Return 3 Press the ENTER C button Auto Wide 4 Press the Y or A button until the Size is selected Press the
30. ation to Yes or No by pressing the Y or A button 8 Press the ENTER C button to confirm your selection gt gt You can also set these options simply by pressing the SLEEP button Ifthe sleep timer is not yet set Off is displayed If the sleep timer is already set the remaining time before which the television switches to Standby mode is displayed Setup Language English AV Setup Digital NR On Miscellaneous PC Setup Move C Enter Return Time Clock 07 05 Sleep Timer Off On Timer 051 Off Timer Off Move Enter M Return Sleep Timer Min Activation v Adjust Move Return Sleep Timer Min Activation v 4 gt Move l Return 43 Setting and Displaying the Current Time You can set the television s clock so that the current time ts displayed by pressing the INFO 3 button You must also set the time if Setu e e e you wish to use the automatic on or off timers S isti st 2 When pressing the I button On Off on the front of Digital NR On the television the clock setting will be reset Miscellaneous PC Setup 1 Press the MENU button Move Enter M Return Result The main menu is displayed 2 Press the Y or A button to select Setup Time Result The options available in the Setup group are Clock 07 05 displayed Sleep Timer Off EE ssa ees 3 Press the ENTER C button Off Timer va 4 PresstheVor A button to select
31. ay Panel continued gt gt The actual configuration on your PDP may be different depending on your model Rear Panel gt For further details about connection refer to pages 52 56 a b c d e MONITOR OUT Trtttt F ttt EEEE AUDIO O 9 o COMPONENT 480i p 576i 0 720p 1 080i S VIDEO AV DVI INPUT Connect to digital video output jack for device with DVI output MONITOR OUT VIDEO L AUDIO R Outputs for external devices Ext 1 Ext 2 Inputs or outputs for external devices such as VCR DVD video game device or video disc players PC INPUT RGB IN AUDIO Connect to the video and audio output jack on your PC ONLY FOR SERVICE Connector for service only S VIDEO Video and audio inputs for external devices with an S Video output such as a camcorder or VCR k Ext 2 Ext 1 VIDEO AUDIO VIDEO Y C VIDEO Y C RGB EXT SPEAKER 82 g AV VIDEO L AUDIO R Video and audio inputs for external devices such as a camcorder or VCR h COMPONENT Video Y Pb Pr and audio L AUDIO R inputs for Component i ANT IN VHF UHF 759 75Q Coaxial connector for Aerial Cable Network j EXT SPEAKER 8Q Connectors for external speakers K POWER IN Connect the supplied power cord Infrared Remote Control TURNS THE PDP ON AND OFF DIRECT CHANNEL SELECTION EXTERNAL INPUT SELECTION TELETEXT PAGE
32. ay settings for a typical computer are shown below But the actual screens on your PC will probably be different depending upon your particular version of Windows and your particular video card But even if your actual screens look different the same basic set up information will apply in almost all cases If not contact your computer manufacturer or Samsung Dealer M On the windows screen select in the following Microso EY canon debe Type Windows98 sequence Start Settings Control Panel Explorer exe Programs My Documents Favorites E y Documents Ea Settings 3 Printers gt A Taskbar Start Menu AJ Folder Options Plactive Desktop W windows Update s When the control panel screen appears click on 32bit ODBC Accessibilty AddNew Add Remove Adobe Gamma Display and a display dialog box will appear Options Hardware Programs Control i i Panel Sam 4 Date Time Display Find Fast Fonts Game Use the settings in Controllers Control Panel to A a personalize your b i Cj 11 computer A y Bay m fil Spinck an jam to view its HP JetAdmin Internet Keyboard LiveUpdate Mail and Fax description aoe S gt A s s A be fit Microsoft Home a gt z 4 echnical Support Modems Mouse Multimedia Network Passwords Display Properties 2 xi Select the Settings tab in the display dialog box Background Screen Saver Appearance Effects Web Settings The two key variables that a
33. d Any attempt to do so may cause damage to the PDP 2 Pull out the bottom of the PDP which has been attached to the Wall Mount Bracket in the direction indicated by the arrows refer to the illustration until it clicks Using the PDP After Connecting External Devices Be sure to secure the PDP by inserting the 2 safety pins after readjusting the angle of the PDP to 0 For safety be sure to secure the PDP using the safety pins To connect external devices such as a DVD or a Home Theater System to the PDP please refer 20 0 2 0 lf the safety pins are not used the PDP may fall causing serious injury 11 Connecting Speakers 1 Remove the screws on the rear of the PDP 2 Hang the two T shaped hangers on the square holes on the rear of the PDP i 3 gt When moving your PDP do NOT hold the speaker connected to your PDP It may damage the bracket clamping the speaker and your PDP together and result in a drop of your PDP and a risk of personal damage and injury 12 Connecting Speakers continued Connect the speaker audio cable to the external speaker output jack on the rear of the PDP matching the and ends of the cable with the diagram on the PDP a o o a o 04 VU 900000 0000 A o
34. djusting the Picture Settings Adjusting the Picture Settings PC or DVI Mode cccccssseeeeeeeeeeeeeeaees Setting the Picture PC Mode Using the Fine Tune Viewing the Channel Scan Picture cccccceseeeccseseeeceeseeeeceeaeeeeeneueeeessaees Freezing the Current Picture Selecting the Picture Size Selecting the Film Mode DNle Digital Natural Image engine DNle cccccccceeeeeeeeeeeeeeeeeeeees Setting the Blue Screen Setting the Melody Sound Viewing the Picture In Picture PIP sscctcsucercnscnorevocincosincsestesntedsrenetoniuensesent Using the Digital NR Digital N Changing the Sound Standard oise Reduction Feature ccccccceesseeeeeees 19 20 22 23 24 25 26 38 26 27 28 29 31 32 32 33 34 34 35 35 36 38 39 Contents continued USING YOUR DISPLAY Adjusting the Sound Settings ccccsssececceeeeeeceeeeeeeeceesseeeseeeeeseeaneeeeseaees Adjusting the Volume Automatically ccccccccceseeeeeeeeeeseeeeeeseeeeseeeeeesaeeeees Setting the TruSurround XT ccccceecccceeceeseeceeceeeeceueeeeeeeeesseeesseeeesseeeessaeees Selecting the Internal MUte cccccccsseececceeeeeeeceeseeeceeaeeeeeeeeeeeessesseeesens Selecting the Sound Mode depending on the model ccceseeeeeeeees Setting the Sleep TimMer ccccecccccsssecccceeeececceeeee
35. e Y or A button to change the setting On or Off gt gt Blue Screen is displayed while no signal from the external device in the External Mode regardless of the Blue Screen Setting A melody sounds when the television is powered on or off 1 Press the MENU button Result The main menu is displayed 2 Press the Y or A button to select Setup Result The options available in the Setup group are displayed 3 Press the ENTER button 4 Press the Y or A button to select Miscellaneous Press the ENTER C button Result The options available in the Miscellaneous group are displayed 5 Press the Y or A button to select Melody Press the ENTER 4 button 6 Press the Y or A button to change the setting On or Off Setup Time Language English AV Setup Digital NR On Miscellaneous PC Setup Move C Enter M Return Miscellaneous Melody Off Plug amp Play Blue Screen Off Move C Enter Return Miscellaneous Melody Plug amp Play Blue Screen Move C Enter M Return Miscellaneous Melody Off Plug amp Play Blue Screen Off Move amp Enter M Return Miscellaneous Melody Plug amp Play Blue Screen Move C Enter M Return 35 Viewing the Picture In Picture PIP You can display a sub picture within the main picture of TV program or external A V devices Picture Mode Dynamic Custom 1 Press the MENU button Colour Tone Normal Col
36. eeceeseeeceeaueeeeseaeeeeenseseeesees Setting and Displaying the Current TiMe ccccseccceeeeeeseeeeeeeeeeseeeeeseaeees Switching the Television On and Off Automatically cccccsseeeeeeeeeeeeeees Viewing an External Signal Source ccccceeeseeeeeceeeeseeeeeeeeaasseeeeeessaaneeeeees Redirecting an Input to the External Output ccccccceeeeeeeeeeeseeeeeeeeeeeees USING THE TELETEXT FEATURE Teletext Feature civicsctsncccasensvniascaduenccedcvacanieteaniensiedentesedeccusdacescaccdtweneteantdacawends Displaying the Teletext Information cccsecccccsseeeeceeeeeeesseeeeeeeseseeeeesaaeeess Selecting Display Options ccccssssceccceseeecceesseeeceeseeeceeaeeeeseeeeeestenseeesees Selecting a Teletext Page ccccccsssscccceseececceseeeeceuseeecseaeeeeseeeeessnenseeesees ADDITIONAL INFORMATION AND CONNECTIONS Connecting to the External Devices cccccseeeeeccesseeeceeeeeeeeseeseeeenenseeeeens Connecting to the S Video INPUL ccceecececeeeeeeceesseeeceeeeeeeeseeeeeesnenseeesens Connecting to the DVI Input ccc cccccsseeeeeceeeeeeeesseeeceeaeseeeseaeeesnenseeesens Connecting to the PC Input cccccccssseceeeceeeeeeecesseeeceeaeseeeseeseeesseaseeesens Connecting to the Component INDUt ccseeceecesseeeeceeeeeeeeseseeesnenseeesens Connecting and Using the Home Theater System cc scseeeeeeeeeeee
37. eeees Setting up Your PC Software Windows only sccceseeeeeeeeeeeeeeeeeeeeeeens Input Mode PC DVI ncccassccssinavoctentesddeainntdneccstabnsessacdadanmnisedeisentoar uzn oo Pin C GNMIGUIFAUOINS ndosiieccosenessnencduinacdicedannncsenasuundeussaenads cadasinseabueded esanaucsueatsuseser RECOMMENDATIONS FOR USE m Troubleshooting Before Contacting Service Personnel Symbols A Se gt Press Important Note 40 40 41 41 42 43 44 45 46 47 48 49 50 91 52 53 54 54 55 56 57 58 59 60 Your New Plasma Display Panel gt gt The actual configuration on your PDP may be different depending on your model Front Panel Power Indicator Power Off Red Power On Off Timer On Green 4 SOURCE External input selection When the Main menu is displayed on screen the Main menu is not operated with source key Remote Control Signal Receiver Aim the remote control towards this spot on the ka PDF Menu display and exit r o A Volume adjustment v CIP O A Channel selection Auto power On 1 Press to turn the PDP on and off r i o i Your New Plasma Displ
38. er to Storing Channels Automatically on page 19 or Storing Channels Manually on page 20 3 Toswitch your PDP off press the I 5 button again Placing in Standby Mode Your PDP can be placed in Standby mode in order to reduce the Power consumption The Standby mode can be useful when you wish to interrupt viewing temporarily during a meal for example 1 Press the POWER button on the remote control Result The screen is turned off and the Standby indicator on the front of the PDP lights 2 To switch the PDP back on simply press the POWER button again or a numeric button gt gt You can also switch on by pressing the PC or Q button 15 Becoming Familiar with the Remote Control The remote control is used mainly to Change channels and adjust the volume Display the on screen menu system The following table presents the most frequently used buttons and their functions Button Viewing Function Menu Function 3 Used to display the next stored channel Used to display the previous stored channel C0 to C9 Used to display the corresponding channels o 2 gt gt For double digit channels the second digit must be pushed immediately after the first Failure to do this will Q oO SLEEP Used to select a preset time interval off 30 60 90 120 nS 150 180 4 Used to increase the volume Used to decrease the volume
39. essing the Y or A button 6 Press the ENTER C button to confirm your choice 7 When you are satisfied with your choice press the EXIT 0 button to return to normal viewing Storing Channels Automatically You can scan for the frequency ranges available to you availability depends on your country Automatically allocated programme e Channel numbers may not correspond to actual or desired programme Country Austria gt numbers However you can sort numbers manually and clear any NOSE z channels you do not wish to watch o Sa Edit gt Fine Tune gt 1 Press the MENU button Ch Scan gt Result The main menu is displayed Move Enter Return 2 Press the Y or A button to select Channel Result The options available in the Channel group are Channel O Country 3 Press the ENTER button Auto atore Belgium SSS eS m Manual Store Croatia 4 Press the or A button to select Country Press the ENTER wM Denmark CY button ja Finland Ch Scan France v Move Enter M Return Result The countries available are listed 5 Select your country or area by pressing the Y or A button 3 gt f you have selected the Others option but do not wish to scan the PAL frequency range store the channels manually Channel see page 21 Country Austria gt Gace 6 Press the ENTER C button to confirm your choice Manual Store gt a 7 Edit gt 7 Press the Y or A button to select
40. in Configurations SCART Connector Ext1 Ext2 gt Pins 5 7 9 11 13 15 and 16 are used for RGB processing and are only wired on the EXT1 or EXT2 connector Pin Signal Pin Signal 1 Audio output R 12 x 2 Audio input R 13 Video chassis return RGB red 3 Audio output L 14 4 Audio chassis return 15 RGB red EXT1 or chroma input 5 Video chassis return RGB blue 16 Blanking signal RGB switching 6 Audio input L 17 Video chassis return 7 RGB blue input EXT1 18 Blanking signal ground 8 Switching voltage 19 Video output 9 Video chassis return RGB green 20 Video or Luminance input 10 AV Link EXT1 21 Screening chassis return 11 RGB green input EXT 1 1 PC Input Connector 56000 DVI Input Connector 15Pin sooo 24Pin Pin PC IN ip fo Pin Signal 1 Red R Pot 1 T M D S Data2 2 Green G io 2 T M D S Data2 3 Blue B i 3 T M D S Data2 4 Shield 4 Grounding 4 T M D S Data4 5 Grounding DDC MN 5 T M D S Data4 6 Red R Grounding MNE 6 Clock DDC 7 Green G Grounding a T Data DDC 8 Blue B Grounding a 8 Not Connected 9 Reserved LG 9 T M D S Datat 10 Sync Grounding i 10 T M D S Data1 11 Grounding 11 T M D S Data1 3 Shield 12 Data DDC 2 12 T M D S Data3 13 Horizontal sync TE 13 T M D S Data3 14 Vertical sync if 1
41. in the following order Custom Contrast Brightness Sharpness Colour Tint NTSC ONLY gt custom Options available in PC DVI Mode Contrast Brightness Sharpness gt gt The horizontal bar is displayed Move the horizontal bar s cursor left or right by pressing the or gt button 2 When the Picture Mode is set to Custom the settings values may vary depending on the input source ex RF Video Component PC or DVI gt gt f you make any changes to these settings the picture standard is automatically switched to the Custom Colour Tone Cool2 Cooll Normal Warml Warm2 When you are satisfied with the settings press the EXIT Lg button to return to normal viewing gt gt Ifyou make any changes to these settings the picture standard is automatically switched to the Custom Mode Dynamic Custom Colour Tone Normal Colour Control Film Mode Off Size 16 9 DNle On PIP ANN Enter Return Custom Contrast a 1 Brightness Jm 50 Sharpness mm 70 Colour Oe 50 Tint G50 R50 Move Enter M Return Contrast Oo o gt Picture Mode Dynamic Custom velo pone Cool Cool1 Film Mode o v o Size l DNIe a Warm1 Wam PIP Warm2 Move C Enter M Return 27 Adjusting the Picture Settings PC or DVI Mode gt Preset to the PC or DVI mode by using the TV VIDEO button or SOURCE button on the front of the PDP
42. n press the TTX MIX BI button again 5 Toexitfrom the teletext display press the EXIT L button a S MODE P MODE 49 Selecting Display Options When you have displayed a Teletext page you can select various options to suit your requirements TIXMIX DUAL HI P SIZE G4 ED S MODE 50 STILLE P MODE To display Hidden text answers to quiz games for example The normal screen A secondary page by entering its number The broadcast when searching for a page The next page The previous page Double size letters in the e Upper half of the screen e Lower half of the screen The normal screen Press the reveal reveal again J 2 sub page g cancel page up page down La v size e Once e Twice e Three times Selecting a Teletext Page You can enter the page number directly by pressing the numeric buttons on the remote control 1 Enter the three digit page number given in the content by pressing the corresponding numeric buttons Result The current page counter is incremented and the page is then displayed If the selected page is linked with several secondary pages the secondary pages are displayed in sequence To freeze the display on a given page press the E3 hold Press it again to resume 2 lf the FASTEXT system is used by the broadcasting company the different topics covered on a Teletext page are colou
43. ngs can be adjusted to suit your personal preferences Sound Mode ee 1 Press the MENU button Result The main menu is displayed Auto Volume Off gt SRS TSXT Off gt 2 Press the Y or A button to select Sound Internal Mute Off p gt Result The options available in the Sound group are displaved 3 Press the ENTER C button Move Enter M Return A Press the Y or A button to select Equalizer Press the ENTER C button Result The Equalizer menu is displayed with the current option 0 5 Select the option volume balance equalizer to be adjusted by pressing the or b button Press the Y or A button to reach the required setting Equalizer 4 d 100300 1K 3K 10K TTT 6 When you are satisfied with the settings press the MENU OI v Adjust Move M Return button to store them gt gt If you make any changes to the equalizer settings the sound standard is automatically switched to the Custom Adjusting the Volume Automatically Each broadcasting station has its own signal conditions and so it is not easy for you to adjust the volume every time the channel is changed This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the Equalizer gt i a b RU SIGE OT modulation signal is high or by raising the sound output when the SRSTSXT Off gt modulation signal is low Internal Mute Off gt Sound
44. nnections Rear of the TV MONITOR OUT Connecting the Home Theater System Connect the monitoring audio out L and R jacks of the MONITOR OUT on the rear side connection panel of the PDP TV to the AUDIO IN jacks of the DVD Home Theater System or AV Receiver using the audio cable 2 Press the TV VIDEO button to select the desired external device connected to the PDP TV S If you want to hear the sound through separate speakers cancel the internal amplifier F oon o 7 cst DVD Home Theater AV Receiver Amplifier Refer to corresponding user s manual from the manufacturer for wiring the speakers to the DVD Home Theater System or AV Receiver Disable the PDP TV internal speaker to enjoy the rich sound through the speakers of your Home Theater System In this case enjoy the sound from the Home Theater System while the PDP TV does not produce the audio To Display the DVD Home Theater Turn the PDP on and press the TV VIDEO button to select the Ext 1 or Ext 2 2 Be sure to connect the video cable properly if desired external input Ext 1 or Ext 2 cannot be selected 3 Play the DVD after activating the DVD Home Theater System 4 Use the volume control of the Home Theater System while watching the PDP using the DVD Home Theater where the PDP TV does not produce the audio 56 Setting up Your PC Software Windows only The Windows displ
45. nput Output Camcorder a Video disc player Zo so Video game device 52 Connecting to the S Video Input The S VIDEO and RCA AUDIO L R connectors are used for equipment with an S Video output such as a camcorder or VCR Rear of the TV Camcorder wee He 1 M gt f To play picture and sound both the S VIDEO and RCA connectors must be used Whenever you connect an audio or video system to your television ensure that all elements are switched off Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions 53 Connecting to the DVI Input The DVI video and L AUDIO R connectors are used for equipment with a DVI output Rear of the TV Personal Computer DVI INPUT DVI D AUDIO Connecting to the PC Input The RGB video and AUDIO connectors are used for interfacing with your PC Rear of the TV Personal Computer 54 Connecting to the Component Input Rear of the TV COMPONENT 480i 576i p 720p 1080i DTV receiver The COMPONENT connectors are used for DTV receiver or DVD 480i p 576i p 720p 1080i 55 Connecting and Using the Home Theater System Use the Monitor Out ports of the PDP for Home Theater System Co
46. nter Return Source List aS S Ext 1 Ext 2 AV S Video Component PC DVI Move Move Ext 1 Ext 2 AV S Video Component PC DVI Move Enter Return Enter Return Edit Name VCR DVD Cable STB HD STB Satellite STB D I Return C Enter 46 10 11 Press the MENU button Result The main menu is displayed Press the Y or A button to select Input Result The options available in the Input group are displayed Press the ENTER S button Press the Y or A button to select Source List Press the ENTER 4 button Result The options available in the Source List group are displayed Press the Y or A button to select signal source then press the ENTER C button 3 gt When you connect equipment to the TV you can choose between the following sets of jacks Ext 1 Ext 2 AV S Video Component PC or DVI on the TV s rear panel Press the MENU button again press the ENTER C button to select Input Press the V or A button to select Edit Name Press the ENTER button Result The options available in the Edit Name group are displayed Press the Y or A button to select external device Ext 1 Ext 2 AV S Video Component PC DVI Press the ENTER 4 button Result The Edit Name available are listed Select the name by pressing the Y or A button Press the ENTER 4 button Set other signal s
47. o select Channel Result The options available in the Channel group are displayed 3 Press the ENTER C button 4 Press the Y or A button to select Manual Store Press the ENTER C button Prog STIT Sond Result The Manual Store menu is displayed System System yy 9 I Auto 9 If necessary select the broadcasting standard required Press the Channel Search Store lt or P button to select Colour System and press the Y or A button The colour standards are displayed in the following order depending on the model Manual Store lt gt Move Adjust M Return Auto PAL SECAM or Auto NT3 58 NT4 43 PAL60 Manual Store 6 Press the lt or b button to select Sound System and press the Y Prog Colour Sound System System or A button The sound standards are displayed in the following order depending on the model Channel Search Store BG DK I L lt gt Move Adjust M Return 20 Storing Channels Manually continued 7 If you know the number of the channel to be stored see the following steps Press the or b button to select Channel Press the V or A button to select c Air channel or s Cable channel Press the gt button Press the numeric buttons 0 9 to select indicate the required number gt gt Ifno sound or abnormal sound re select the sound standard required 8 If you do not know the channel numbers select the Search by pressing the lt
48. our Control Result The main menu is displayed Film Mode Off Size 16 9 2 Press the V or A button to select Picture DNIe On Result The options available in the Picture group are Move Enter M Return displayed 3 Press the ENTER C button 4 Press the Y or A button to select PIP Press the ENTER C slu button Source Swap Result The options available in the PIP group are displayed Size S IU III IE I II IE EU III I Position Prog 5 Press the ENTER 4 button set the PIP to on by pressing the V or A button Press the ENTER C button A ETE REDD 6 Press the Y or A button to select Source and press the ENTER C button Select a source of the sub picture by pressing the ENTER C button PIP wW Result The sources are displayed in the following order Source Ext 1 Swap Eana tl TV Ext 1 Ext 2 AV S Video Size ay Component PC DVI Position S Video Prog 1 gt gt The Prc can not be selected in DVI mode Component aa The DVI can not be selected in PC mode Move Enter Return i 7 Press the Y or A button to select Swap Press the ENTER C button Result The main picture and sub picture are interchanged PIP Source 8 Press the Y or A button to select Size Select a size of the sub z picture by pressing the ENTER C button Ize A Position Result The sizes are displayed in the following order Prog mm ml ta CT Large
49. ources VCR DVD Cable STB HD STB Satellite STB AV Receiver DVD Receiver Game Camcorder DVD Combo DHR or PC using the same method as listed above 2 Voucan also set these options simply by pressing the TV VIDEO button If you change the external source while viewing pictures might take a short period of time to be switched gt DHR DVD HDD Recorder Redirecting an Input to the External Output Your television enables you to choose which audio video signals are output to the external connector Setup m Time Language English 1 Press the MENU button Result The main menu is displayed Digital NR On ial Miscellaneous 2 Press the Y or A button to select Setup PC Setup Result The options available in the Setup group are displayed Move Enter Return 3 Press the ENTER C button V AV Setup A Press the Y or A button to select AV Setup Press the ENTER xt gt C button Result The AV Setup menu is displayed 5 Press the Y or A button to select required input Ext 2 then press the ENTER C button Select the source to be directed to the output by pressing the Y or A button Move Enter M Return 6 Press the ENTER C button to confirm the change AV Setup Ext 1 Ext 2 AV S Video Monitor Out Move C Enter Return 47 Teletext Feature Most television channels provide written information services via teletext Information provided includes
50. pply the television PC interface are Resolution and Colours The correct settings for these two variables are Size sometimes called Resolution 640 x 480 pixels PS42D4S Colour 24 bit colour might also be expressed as 16 million colours Display Unknown Monitor on ATI Graphics Pro Turbo PCI atim64 CT Shown at left is a typical screen for Display dialog box Colors Screen area Fe Co Gi O ee If a vertical freguency option exists on your display a 1024 by 768 pixels settings dialog box the correct value is 60 Hz 7 tzmtend my Windows desktop onta this moniter Advanced Otherwise just click OK and exit the dialog box Cancel Apply 57 Input Mode PC DVI Both screen position and size will vary depending on the type of PC monitor and its resolution The table below shows all of the display modes that are supported frequency Hz frequency kHz polarity polarity 640x350 70086 31469 N O PO 0 850800 3781 N J P 640x400 85080 003781 POI N 720x400 70087 31469 P N 85 039 00893 P N 640x480 59940 31469 N N 72809 87 861 N N 75 000 37 500 N N IBM PC AT 85 008 43 269 N N Compatible 800x600 56 250 35 156 NP NP 603170 37879 P P 72488 48 077 P P 75 000 46 875 P P 85 061 53 674 P P 848 x 480 nVidia chipset 1024x768
51. r coded and can be selected by pressing the coloured buttons on the remote control Press the coloured button corresponding to the topic that you wish to select the available topics are given on the status line Result The page is displayed with other coloured information that can be selected in the same way 3 To display the previous or next page press the corresponding TXMIX DVALH i SLO PO or 5 button arn 6 S MODE P MODE 4 To display the subpage see the following steps 5 Pressthe sub page button Result The available subpages appear Select the required sub page Sub pages can be scrolled by pressing the or button 5 When you have finished press the EXIT LI button to return to your normal broadcast 51 Connecting to the External Devices MONITOR OUT are used for the equipment with an RGB output such as video game devices or video disc players Rear of the TV Input Output VIDEO Y C VIDEO Y C RGB or ipo E BA B Da B Ba D D BA DA DALI G BA NA DA DA DA DA DA DA DA A i G E Video game AUGE SEO A oo od TAS cl oc od B 115a DT B gt This end can be fitted with A SCART connector Three RCA connectors VIDEO AUDIO L R Input Output Specification Input Output Connector Video Audio L R S Video RGB Video Audio L R Ext 1 v v v v Only TV output is available Ext 2 v v v Output you can choose Rear of the TV I
52. rol malfunctions Replace the remote control batteries Clean the upper edge of the remote control transmission window Check the battery terminals o o 60 AFTER SALES SERVICE Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present ELECTRONICS BN68 00699A 00
53. ton to select Edit Press the ENTER C button Result The Edit menu is displayed 5 Press the Y or A button to select Child Lock Press the ENTER C button Result The Child Lock menu is displayed with the current channel automatically is selected Blue Screen is displayed when the Child Lock is activated 6 Press the Y or A button to select the channel to be locked T Press the ENTER C button To lock the channel select Locked by pressing the Y or A button to unlock the channel select Unlocked Press the ENTER C button to confirm Channel Country Austria Auto Store Manual Store Fine Tune gt Ch Scan gt Move C Enter Return Add Delete Sort Name LNA Off Child Lock Move Enter M Return Child Lock Unlocked Unlocked Unlocked Unlocked Unlocked Move C Enter M Return Child Lock Unlocked Unlocked Unlocked Unlocked Adjust C Enter Return 25 Displaying Information You can view the channel information and setting status you select by pressing the INFO _ button on the remote control Picture Dynamic Sound Music 00 00 ee D INFO Gaal Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements Mode Custom Colour Tone Colour Control Film Mode Size DNIe PIP Move Enter Mode Custom Colour Tone c Film Mode Size DNIe PIP Mo
54. ts FOREWORD Important aaneen Checking Parts CONNECTING AND PREPARING YOUR DISPLAY Your New Plasma Display Panel cccccssscceseceeesseeeseeeeeseseeeseeeeneeeeens Infrared Remote Control Inserting the Batteries in the R Assembling the Stand Base emot GONlfolsiia uiu uu skin nik nu u i za n dola aich Installing the Display on the Wall Attachment Panel c ccceseeeeeeeees Connecting Speakers Connecting to an Aerial or Cable Television Network c csssscccsseeeeeeeees Connecting a Satellite Receiver or D COEL cccccsececceeeeeeeeeeseeeeesaaeees Switching On and Off Placing in Standby Mode Becoming Familiar with the Remote Control ccccsscceceseeeeeeeeseeeeeeaeeeees Plug amp Play Feature Choosing Your Language SETTING THE CHANNELS Storing Channels AutomattiCally cccccseececceeeeeeceeeeeeeeseeeeeesseeseeeseaseeesens Storing Channels Manually Skipping Unwanted Channels Sorting the Stored Channels Assigning Names to Channels Activating the Child Lock Displaying Information Using the LNA Low Noise Amplifier Feature ccccccccsssseeeeeseeeeeeeeeees USING YOUR DISPLAY continued Changing the Picture Standard tecsccassnttetapcrionseuncteasseaeetnontessaatenncoesasimiaeenecewent A
55. u is displayed To start the search press the ENTER C button Result The search will end automatically Channels are sorted and stored in an order which reflects their position in the frequency range with lowest first and highest last When it has finished the Clock Set menu is displayed 3 gt Tostop the search before it has finished or return to normal viewing press the MENU 11 button Press the ENTER C button to set the Clock Press the lt or P button to move to the hour or minute Set the hour or minute by pressing the Y or A button When it has finished the message Enjoy Your Watching is displayed and then the channel which has been stored will be activated Enter I Exit S LANGUAGE BbJITAPCKN Hrvatski CeStina Nederland Francais Deutsch V More Move Enter Plug amp Play oo Antenna Input Check Country Belgium Croatia Denmark Finland France Germany v More Move Enter Auto Store ooa Press ENTER to start channel memory 40 MHz III GEnter 11 Stop s AUTO STOPE Channel store in process Storing 57 MHz aS 1 Stop amp Enter M Stop Adjust lt p Move M Stop Enjoy Your Watching 17 Plug amp Play Feature continued If you want to reset this feature Setup Time Language English AV Setup Digital NR On Miscellaneous PC Setup Move Enter M Return Miscellaneous Melody Off gt Pl
56. ug amp Play gt Blue Screen Off b Move Enter M Return 1 Press the MENU button Result The main menu is displayed Press the Y or A button to select Setup Result The options available in the Setup group are displayed Press the ENTER C button Press the Y or A button to select Miscellaneous Press the ENTER C button Result The options available in the Miscellaneous group are displayed Press the Y or A button to select Plug amp Play Press the ENTER C button Result he message Plug amp Play is displayed For further details on how to set refer to the opposite page Choosing Your Language When you start using your television for the first time you must Setup Time Language English AV Setup Digital NR On Miscellaneous PC Setup Move Enter I Return Time M Tre 0 Te 3 AV Setup Digital NR Miscellaneous PC Setup BBJITAPCKN Hrvatski e tina Nederland Francais v Move Enter M Return 18 select the language which will be used for displaying menus and indications 1 Press the MENU button Result The main menu is displayed 2 Press the Y or A button to select Setup Result The options available in the Setup group are displayed Press the ENTER C button 4 Press the Y or A button to select Language Press the ENTER C button Result The languages available are listed 5 Select the appropriate language by pr
57. ve Enter 26 Picture Dynamic Normal Off 16 9 On M Return Picture 7 Standard Movie Custom IU a J On M Return 1 6 Press the MENU button Result The main menu is displayed Press the Y or A button to select Picture Result The options available in the Picture group are displayed Press the ENTER C button Result The Mode is selected Press the ENTER 4 button again Result The options available are listed Select the option by pressing the Y or A button Result The following modes are available depending on the input source Dynamic Standard Movie Custom High Middle Low Custom PC or DVI Mode Press the ENTER C button to confirm 2 You can also set these options simply by pressing the P MODE aak Picture Mode button Adjusting the Picture Settings Your television has several settings which allow you to control picture quality Picture Press the MENU button Result The main menu is displayed Press the Y or A button to select Picture Result The options available in the Picture group are displayed Press the ENTER C button Select the required option Custom Colour Tone pressing the VY or A button Press the Y or A button to select Custom Press the ENTER C button Result he Custom menu is displayed Press the ENTER C button to change the setting The options are displayed
58. w in the direction of the arrow after assembling the bracket 3 The angle can be adjusted from 0 to 15 by 2 eee 10 Installing the Display on the Wall Attachment Panel continued gt gt The exterior of the PDP may be different than the picture 1 Assembly and installation of the plastic hanger is the same Remove the screws from the back of the PDP 2 Tighten the screws of the plastic hanger to the back side of the PDP Use the screws and assemble the plastic hanger o Please ask the installers to install the wall mount bracket Please be sure to check if the plastic hanger is completely secured on both the left and right side after hanging the PDP on the wall mount bracket Please avoid catching your fingers while installing and adjusting the angle Please tightly secure the wall mount bracket to the wall to avoid injury from a falling PDP Put the 4 pegs on the PDP in the grooves of the wall mount bracket and pull down on the PDP to secure it to the wall mount bracket Tighten the screws as shown so that the PDP cannot be separated from wall mount bracket PDP panel Wall attachment panel bracket Wall Connecting External Devices to the PDP to following instructions 1 Be sure to remove the safety pins underneath the PDP Ifthe safety pins are not removed the angle cannot be adjuste
59. you more detailed image with 3D noise reduction detail enhancement contrast enhancement and white enhancement New image compensation Algorithm gives brighter clearer much detailed image to you Press the MENU button Result The main menu is displayed Press the Y or A button until the Picture is selected Result The options available in the Picture group are displayed Press the ENTER S button Press the Y or A button until the DNIe is selected Press the ENTER C button Press the Y or A button to change the setting On Switches on the DNIe mode Off Switches off the DNIe mode Demo Option The screen before applying DNIe appears on the right and the screen after applying DNle appears on the left Setting the Blue Screen If no signal is being received or the signal is very weak a blue screen automati cally replaces the noisy picture background If you wish to continue viewing the poor picture you must set the Blue Screen mode to Off 1 Press the MENU button Result The main menu is displayed 2 Press the Y or A button to select Setup Result The options available in the Setup group are displayed Press the ENTER S button 4 Press the Y or A button to select Miscellaneous Press the ENTER button Result The options available in the Miscellaneous group are displayed 5 Press the Y or A button to select Blue Screen Press the ENTER C button 6 Press th
Download Pdf Manuals
Related Search